| # This file contains help messages for missing external blobs. Each message has |
| # a tag (MUST be just lower-case text, digits and hyphens) starting in column 1, |
| # followed by a colon (:) to indicate its start. The message can include any |
| # number of lines, including blank lines. |
| # |
| # When looking for a tag, Binman uses the value of 'missing-msg' for the entry, |
| # the entry name or the entry type, in that order |
| |
| atf-bl31: |
| See the documentation for your board. You may need to build ARM Trusted |
| Firmware and build with BL31=/path/to/bl31.bin |
| |
| atf-bl31-sunxi: |
| Please read the section on ARM Trusted Firmware (ATF) in |
| board/sunxi/README.sunxi64 |
| |
| scp-sunxi: |
| SCP firmware is required for system suspend, but is otherwise optional. |
| Please read the section on SCP firmware in board/sunxi/README.sunxi64 |
| |
| iot2050-seboot: |
| See the documentation for IOT2050 board. Your image is missing SEBoot |
| which is mandatory for board startup. Prebuilt SEBoot located at |
| meta-iot2050/tree/master/recipes-bsp/u-boot/files/prebuild/tiboot3.bin. |
| |
| iot2050-sysfw: |
| See the documentation for IOT2050 board. Your image is missing system |
| firmware which is mandatory for board startup. Prebuilt system firmware |
| located at meta-iot2050/tree/master/recipes-bsp/u-boot/files/prebuild/ |
| with sysfw prefix. |
| |
| k3-rti-wdt-firmware: |
| If CONFIG_WDT_K3_RTI_LOAD_FW is enabled, a firmware image is needed for |
| the R5F core(s) to trigger the system reset. One possible source is |
| https://github.com/siemens/k3-rti-wdt. |
| |
| tee-os: |
| See the documentation for your board. You may need to build Open Portable |
| Trusted Execution Environment (OP-TEE) with TEE=/path/to/tee.bin |
| |
| opensbi: |
| See the documentation for your board. The OpenSBI git repo is at |
| https://github.com/riscv/opensbi.git |
| You may need to build fw_dynamic.bin first and re-build u-boot with |
| OPENSBI=/path/to/fw_dynamic.bin |