| U-Boot for the NXP i.MX8MN EVK board |
| - Build the ARM Trusted firmware binary |
| - Get firmware-imx package |
| Get and Build the ARM Trusted firmware |
| ====================================== |
| Note: srctree is U-Boot source directory |
| Get ATF from: https://source.codeaurora.org/external/imx/imx-atf |
| branch: imx_4.19.35_1.1.0 |
| $ cp build/imx8mn/release/bl31.bin $(srctree) |
| ============================= |
| $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.5.bin |
| $ chmod +x firmware-imx-8.5.bin |
| $ cp firmware-imx-8.5/firmware/ddr/synopsys/ddr4*.bin $(srctree) |
| $ export CROSS_COMPILE=aarch64-poky-linux- |
| $ make imx8mn_ddr4_evk_defconfig |
| $ export ATF_LOAD_ADDR=0x960000 |
| Burn the flash.bin to MicroSD card offset 32KB |
| $sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32 |
| Set Boot switch to SD boot |