include/configs/omap3_logic.h - filogic/uboot - Gitiles

 /*
  * (C) Copyright 2011 Logic Product Development <www.logicpd.com>
  *	Peter Barada <peter.barada@logicpd.com>
  *
  * Configuration settings for the Logic OMAP35x/DM37x SOM LV/Torpedo
  * reference boards.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 /* High Level Configuration Options */

 #define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */

 #include <configs/ti_omap3_common.h>

 #ifdef CONFIG_SPL_BUILD
 /*
  * Disable MMC DM for SPL build and can be re-enabled after adding
  * DM support in SPL
  */
 #undef CONFIG_DM_MMC
 #undef OMAP_HSMMC_USE_GPIO

 /* select serial console configuration for SPL */
 #undef CONFIG_CONS_INDEX
 #define CONFIG_CONS_INDEX              1
 #define CONFIG_SYS_NS16550_COM1                OMAP34XX_UART1
 #endif


 /*
  * We are only ever GP parts and will utilize all of the "downloaded image"
  * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB) in
  * order to allow for BCH8 to fit in.
  */
 #undef CONFIG_SPL_TEXT_BASE
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE		0x40200000

 #define CONFIG_MISC_INIT_R		/* misc_init_r dumps the die id */
 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 #define CONFIG_REVISION_TAG

 /* Hardware drivers */

 #define CONFIG_USB_OMAP3

 /* I2C */
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* EEPROM AT24C64      */

 /* USB */
 #define CONFIG_USB_MUSB_OMAP2PLUS
 #define CONFIG_USB_MUSB_PIO_ONLY
 #define CONFIG_USB_ETHER
 #define CONFIG_USB_ETHER_RNDIS
 #define CONFIG_USB_FUNCTION_FASTBOOT
 #define CONFIG_CMD_FASTBOOT
 #define CONFIG_ANDROID_BOOT_IMAGE
 #define CONFIG_FASTBOOT_BUF_ADDR	CONFIG_SYS_LOAD_ADDR
 #define CONFIG_FASTBOOT_BUF_SIZE	0x07000000

 /* TWL4030 */
 #define CONFIG_TWL4030_USB

 /* Board NAND Info. */
 #ifdef CONFIG_NAND
 #define CONFIG_NAND_OMAP_GPMC

 #define CONFIG_SYS_NAND_ADDR		NAND_BASE /* physical address */
 						  /* to access nand */
 #define CONFIG_SYS_MAX_NAND_DEVICE	1	  /* Max number of */
 						  /* NAND devices */
 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 #define CONFIG_SYS_NAND_PAGE_COUNT	64
 #define CONFIG_SYS_NAND_PAGE_SIZE	2048
 #define CONFIG_SYS_NAND_OOBSIZE		64
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
 #define CONFIG_SYS_NAND_ECCPOS		{2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, \
 					 13, 14, 16, 17, 18, 19, 20, 21, 22, \
 					 23, 24, 25, 26, 27, 28, 30, 31, 32, \
 					 33, 34, 35, 36, 37, 38, 39, 40, 41, \
 					 42, 44, 45, 46, 47, 48, 49, 50, 51, \
 					 52, 53, 54, 55, 56}

 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	13
 #define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
 #define CONFIG_BCH
 #define CONFIG_SYS_NAND_MAX_OOBFREE	2
 #define CONFIG_SYS_NAND_MAX_ECCPOS	56
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
 #define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
 #define CONFIG_MTD_PARTITIONS		/* required for UBI partition support */
 #define MTDIDS_DEFAULT			"nand0=omap2-nand.0"
 #define MTDPARTS_DEFAULT	"mtdparts=omap2-nand.0:"\
 							"512k(MLO),"\
 							"1792k(u-boot),"\
 							"128k(spl-os)," \
 							"128k(u-boot-env),"\
 							"6m(kernel),-(fs)"
 #endif

 /* Environment information */

 #define CONFIG_PREBOOT \
 	"setenv preboot;"						\
 	"nand unlock;"							\
 	"saveenv;"

 #define CONFIG_EXTRA_ENV_SETTINGS \
 	DEFAULT_LINUX_BOOT_ENV \
 	"mtdids=" MTDIDS_DEFAULT "\0"	\
 	"mtdparts=" MTDPARTS_DEFAULT "\0" \
 	"mmcdev=0\0" \
 	"mmcroot=/dev/mmcblk0p2 rw\0" \
 	"mmcrootfstype=ext4 rootwait\0" \
 	"nandroot=ubi0:rootfs rw ubi.mtd=fs noinitrd\0" \
 	"nandrootfstype=ubifs rootwait\0" \
 	"autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \
 			"if run loadbootscript; then " \
 				"run bootscript; " \
 			"else " \
 				"run defaultboot;" \
 			"fi; " \
 		"else run defaultboot; fi\0" \
 	"defaultboot=run mmcramboot\0" \
 	"consoledevice=ttyO0\0" \
 	"setconsole=setenv console ${consoledevice},${baudrate}n8\0" \
 	"dump_bootargs=echo 'Bootargs: '; echo $bootargs\0" \
 	"rotation=0\0" \
 	"vrfb_arg=if itest ${rotation} -ne 0; then " \
 		"setenv bootargs ${bootargs} omapfb.vrfb=y " \
 		"omapfb.rotate=${rotation}; " \
 		"fi\0" \
 	"optargs=ignore_loglevel early_printk no_console_suspend\0" \
 	"common_bootargs=run setconsole; setenv bootargs " \
 		"${bootargs} "\
 		"console=${console} " \
 		"${mtdparts} "\
 		"${optargs}; " \
 		"run vrfb_arg\0" \
 	"loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
 	"bootscript=echo 'Running bootscript from mmc ...'; " \
 		"source ${loadaddr}\0" \
 	"loadimage=mmc rescan; " \
 		"load mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \
 	"ramdisksize=64000\0" \
 	"ramdiskimage=rootfs.ext2.gz.uboot\0" \
 	"loadramdisk=mmc rescan; " \
 		"load mmc ${mmcdev} ${rdaddr} ${ramdiskimage}\0" \
 	"ramargs=setenv bootargs "\
 		"root=/dev/ram rw ramdisk_size=${ramdisksize}\0" \
 	"mmcargs=setenv bootargs "\
 		"root=${mmcroot} rootfstype=${mmcrootfstype}\0" \
 	"nandargs=setenv bootargs "\
 		"root=${nandroot} " \
 		"rootfstype=${nandrootfstype}\0" \
 	"nfsargs=setenv serverip ${tftpserver}; " \
 		"setenv bootargs root=/dev/nfs " \
 		"nfsroot=${nfsrootpath} " \
 		"ip=${ipaddr}:${tftpserver}:${gatewayip}:${netmask}::eth0:off\0" \
 	"nfsrootpath=/opt/nfs-exports/omap\0" \
 	"autoload=no\0" \
 	"loadfdt=mmc rescan; " \
 		"load mmc ${mmcdev} ${fdtaddr} ${fdtimage}\0" \
 	"mmcbootcommon=echo Booting with DT from mmc${mmcdev} ...; " \
 		"run mmcargs; " \
 		"run common_bootargs; " \
 		"run dump_bootargs; " \
 		"run loadimage; " \
 		"run loadfdt;\0 " \
 	"mmcbootz=setenv bootfile zImage; " \
 		"run mmcbootcommon; "\
 		"bootz ${loadaddr} - ${fdtaddr}\0" \
 	"mmcboot=setenv bootfile uImage; "\
 		"run mmcbootcommon; "\
 		"bootm ${loadaddr} - ${fdtaddr}\0" \
 	"mmcrambootcommon=echo 'Booting kernel from MMC w/ramdisk...'; " \
 		"run ramargs; " \
 		"run common_bootargs; " \
 		"run dump_bootargs; " \
 		"run loadimage; " \
 		"run loadfdt; " \
 		"run loadramdisk\0" \
 	"mmcramboot=setenv bootfile uImage; " \
 		"run mmcrambootcommon; " \
 		"bootm ${loadaddr} ${rdaddr} ${fdtimage}\0" \
 	"mmcrambootz=setenv bootfile zImage; " \
 		"run mmcrambootcommon; " \
 		"bootz ${loadaddr} ${rdaddr} ${fdtimage}\0" \
 	"tftpboot=echo 'Booting kernel/ramdisk rootfs from tftp...'; " \
 		"run ramargs; " \
 		"run common_bootargs; " \
 		"run dump_bootargs; " \
 		"tftpboot ${loadaddr} ${zimage}; " \
 		"tftpboot ${rdaddr} ${ramdiskimage}; " \
 		"bootm ${loadaddr} ${rdaddr}\0" \
 	"tftpbootz=echo 'Booting kernel NFS rootfs...'; " \
 		"dhcp;" \
 		"run nfsargs;" \
 		"run common_bootargs;" \
 		"run dump_bootargs;" \
 		"tftpboot $loadaddr zImage;" \
 		"bootz $loadaddr\0" \
 	"nandbootcommon=echo 'Booting kernel from NAND...';" \
 		"nand unlock;" \
 		"run nandargs;" \
 		"run common_bootargs;" \
 		"run dump_bootargs;" \
 		"nand read ${loadaddr} kernel;" \
 		"nand read ${fdtaddr} spl-os;\0" \
 	"nandbootz=run nandbootcommon; "\
 		"bootz ${loadaddr} - ${fdtaddr}\0"\
 	"nandboot=run nandbootcommon; "\
 		"bootm ${loadaddr} - ${fdtaddr}\0"\

 #define CONFIG_BOOTCOMMAND \
 	"run autoboot"

 /* Miscellaneous configurable options */

 /* memtest works on */
 #define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)
 #define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
 					0x01F00000) /* 31MB */

 /* FLASH and environment organization */

 /* **** PISMO SUPPORT *** */
 #if defined(CONFIG_CMD_NAND)
 #define CONFIG_SYS_FLASH_BASE		NAND_BASE
 #endif

 /* Monitor at start of flash */
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE

 #define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
 #define SMNAND_ENV_OFFSET		0x260000 /* environment starts here */

 #define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
 #define CONFIG_ENV_OFFSET		SMNAND_ENV_OFFSET
 #define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET

 /* SMSC922x Ethernet */
 #if defined(CONFIG_CMD_NET)
 #define CONFIG_SMC911X
 #define CONFIG_SMC911X_32_BIT
 #define CONFIG_SMC911X_BASE	0x08000000
 #endif /* (CONFIG_CMD_NET) */

 /* Defines for SPL */

 #define CONFIG_SPL_OMAP3_ID_NAND

 /* NAND: SPL falcon mode configs */
 #ifdef CONFIG_SPL_OS_BOOT
 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS	0x280000
 #endif

 #endif /* __CONFIG_H */
	/*
	* (C) Copyright 2011 Logic Product Development <www.logicpd.com>
	* Peter Barada <peter.barada@logicpd.com>
	*
	* Configuration settings for the Logic OMAP35x/DM37x SOM LV/Torpedo
	* reference boards.
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	/* High Level Configuration Options */

	#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */

	#include <configs/ti_omap3_common.h>

	#ifdef CONFIG_SPL_BUILD
	/*
	* Disable MMC DM for SPL build and can be re-enabled after adding
	* DM support in SPL
	*/
	#undef CONFIG_DM_MMC
	#undef OMAP_HSMMC_USE_GPIO

	/* select serial console configuration for SPL */
	#undef CONFIG_CONS_INDEX
	#define CONFIG_CONS_INDEX 1
	#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1
	#endif


	/*
	* We are only ever GP parts and will utilize all of the "downloaded image"
	* area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB) in
	* order to allow for BCH8 to fit in.
	*/
	#undef CONFIG_SPL_TEXT_BASE
	#define CONFIG_SPL_FRAMEWORK
	#define CONFIG_SPL_TEXT_BASE 0x40200000

	#define CONFIG_MISC_INIT_R /* misc_init_r dumps the die id */
	#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
	#define CONFIG_SETUP_MEMORY_TAGS
	#define CONFIG_INITRD_TAG
	#define CONFIG_REVISION_TAG

	/* Hardware drivers */

	#define CONFIG_USB_OMAP3

	/* I2C */
	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM AT24C64 */

	/* USB */
	#define CONFIG_USB_MUSB_OMAP2PLUS
	#define CONFIG_USB_MUSB_PIO_ONLY
	#define CONFIG_USB_ETHER
	#define CONFIG_USB_ETHER_RNDIS
	#define CONFIG_USB_FUNCTION_FASTBOOT
	#define CONFIG_CMD_FASTBOOT
	#define CONFIG_ANDROID_BOOT_IMAGE
	#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
	#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000

	/* TWL4030 */
	#define CONFIG_TWL4030_USB

	/* Board NAND Info. */
	#ifdef CONFIG_NAND
	#define CONFIG_NAND_OMAP_GPMC

	#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
	/* to access nand */
	#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */
	/* NAND devices */
	#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	#define CONFIG_SYS_NAND_PAGE_COUNT 64
	#define CONFIG_SYS_NAND_PAGE_SIZE 2048
	#define CONFIG_SYS_NAND_OOBSIZE 64
	#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024)
	#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
	#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, \
	13, 14, 16, 17, 18, 19, 20, 21, 22, \
	23, 24, 25, 26, 27, 28, 30, 31, 32, \
	33, 34, 35, 36, 37, 38, 39, 40, 41, \
	42, 44, 45, 46, 47, 48, 49, 50, 51, \
	52, 53, 54, 55, 56}

	#define CONFIG_SYS_NAND_ECCSIZE 512
	#define CONFIG_SYS_NAND_ECCBYTES 13
	#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
	#define CONFIG_BCH
	#define CONFIG_SYS_NAND_MAX_OOBFREE 2
	#define CONFIG_SYS_NAND_MAX_ECCPOS 56
	#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
	#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
	#define CONFIG_MTD_PARTITIONS /* required for UBI partition support */
	#define MTDIDS_DEFAULT "nand0=omap2-nand.0"
	#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:"\
	"512k(MLO),"\
	"1792k(u-boot),"\
	"128k(spl-os)," \
	"128k(u-boot-env),"\
	"6m(kernel),-(fs)"
	#endif

	/* Environment information */

	#define CONFIG_PREBOOT \
	"setenv preboot;" \
	"nand unlock;" \
	"saveenv;"

	#define CONFIG_EXTRA_ENV_SETTINGS \
	DEFAULT_LINUX_BOOT_ENV \
	"mtdids=" MTDIDS_DEFAULT "\0" \
	"mtdparts=" MTDPARTS_DEFAULT "\0" \
	"mmcdev=0\0" \
	"mmcroot=/dev/mmcblk0p2 rw\0" \
	"mmcrootfstype=ext4 rootwait\0" \
	"nandroot=ubi0:rootfs rw ubi.mtd=fs noinitrd\0" \
	"nandrootfstype=ubifs rootwait\0" \
	"autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \
	"if run loadbootscript; then " \
	"run bootscript; " \
	"else " \
	"run defaultboot;" \
	"fi; " \
	"else run defaultboot; fi\0" \
	"defaultboot=run mmcramboot\0" \
	"consoledevice=ttyO0\0" \
	"setconsole=setenv console ${consoledevice},${baudrate}n8\0" \
	"dump_bootargs=echo 'Bootargs: '; echo $bootargs\0" \
	"rotation=0\0" \
	"vrfb_arg=if itest ${rotation} -ne 0; then " \
	"setenv bootargs ${bootargs} omapfb.vrfb=y " \
	"omapfb.rotate=${rotation}; " \
	"fi\0" \
	"optargs=ignore_loglevel early_printk no_console_suspend\0" \
	"common_bootargs=run setconsole; setenv bootargs " \
	"${bootargs} "\
	"console=${console} " \
	"${mtdparts} "\
	"${optargs}; " \
	"run vrfb_arg\0" \
	"loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
	"bootscript=echo 'Running bootscript from mmc ...'; " \
	"source ${loadaddr}\0" \
	"loadimage=mmc rescan; " \
	"load mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \
	"ramdisksize=64000\0" \
	"ramdiskimage=rootfs.ext2.gz.uboot\0" \
	"loadramdisk=mmc rescan; " \
	"load mmc ${mmcdev} ${rdaddr} ${ramdiskimage}\0" \
	"ramargs=setenv bootargs "\
	"root=/dev/ram rw ramdisk_size=${ramdisksize}\0" \
	"mmcargs=setenv bootargs "\
	"root=${mmcroot} rootfstype=${mmcrootfstype}\0" \
	"nandargs=setenv bootargs "\
	"root=${nandroot} " \
	"rootfstype=${nandrootfstype}\0" \
	"nfsargs=setenv serverip ${tftpserver}; " \
	"setenv bootargs root=/dev/nfs " \
	"nfsroot=${nfsrootpath} " \
	"ip=${ipaddr}:${tftpserver}:${gatewayip}:${netmask}::eth0:off\0" \
	"nfsrootpath=/opt/nfs-exports/omap\0" \
	"autoload=no\0" \
	"loadfdt=mmc rescan; " \
	"load mmc ${mmcdev} ${fdtaddr} ${fdtimage}\0" \
	"mmcbootcommon=echo Booting with DT from mmc${mmcdev} ...; " \
	"run mmcargs; " \
	"run common_bootargs; " \
	"run dump_bootargs; " \
	"run loadimage; " \
	"run loadfdt;\0 " \
	"mmcbootz=setenv bootfile zImage; " \
	"run mmcbootcommon; "\
	"bootz ${loadaddr} - ${fdtaddr}\0" \
	"mmcboot=setenv bootfile uImage; "\
	"run mmcbootcommon; "\
	"bootm ${loadaddr} - ${fdtaddr}\0" \
	"mmcrambootcommon=echo 'Booting kernel from MMC w/ramdisk...'; " \
	"run ramargs; " \
	"run common_bootargs; " \
	"run dump_bootargs; " \
	"run loadimage; " \
	"run loadfdt; " \
	"run loadramdisk\0" \
	"mmcramboot=setenv bootfile uImage; " \
	"run mmcrambootcommon; " \
	"bootm ${loadaddr} ${rdaddr} ${fdtimage}\0" \
	"mmcrambootz=setenv bootfile zImage; " \
	"run mmcrambootcommon; " \
	"bootz ${loadaddr} ${rdaddr} ${fdtimage}\0" \
	"tftpboot=echo 'Booting kernel/ramdisk rootfs from tftp...'; " \
	"run ramargs; " \
	"run common_bootargs; " \
	"run dump_bootargs; " \
	"tftpboot ${loadaddr} ${zimage}; " \
	"tftpboot ${rdaddr} ${ramdiskimage}; " \
	"bootm ${loadaddr} ${rdaddr}\0" \
	"tftpbootz=echo 'Booting kernel NFS rootfs...'; " \
	"dhcp;" \
	"run nfsargs;" \
	"run common_bootargs;" \
	"run dump_bootargs;" \
	"tftpboot $loadaddr zImage;" \
	"bootz $loadaddr\0" \
	"nandbootcommon=echo 'Booting kernel from NAND...';" \
	"nand unlock;" \
	"run nandargs;" \
	"run common_bootargs;" \
	"run dump_bootargs;" \
	"nand read ${loadaddr} kernel;" \
	"nand read ${fdtaddr} spl-os;\0" \
	"nandbootz=run nandbootcommon; "\
	"bootz ${loadaddr} - ${fdtaddr}\0"\
	"nandboot=run nandbootcommon; "\
	"bootm ${loadaddr} - ${fdtaddr}\0"\

	#define CONFIG_BOOTCOMMAND \
	"run autoboot"

	/* Miscellaneous configurable options */

	/* memtest works on */
	#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)
	#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
	0x01F00000) /* 31MB */

	/* FLASH and environment organization */

	/* ** PISMO SUPPORT * */
	#if defined(CONFIG_CMD_NAND)
	#define CONFIG_SYS_FLASH_BASE NAND_BASE
	#endif

	/* Monitor at start of flash */
	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE

	#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
	#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */

	#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
	#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
	#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET

	/* SMSC922x Ethernet */
	#if defined(CONFIG_CMD_NET)
	#define CONFIG_SMC911X
	#define CONFIG_SMC911X_32_BIT
	#define CONFIG_SMC911X_BASE 0x08000000
	#endif /* (CONFIG_CMD_NET) */

	/* Defines for SPL */

	#define CONFIG_SPL_OMAP3_ID_NAND

	/* NAND: SPL falcon mode configs */
	#ifdef CONFIG_SPL_OS_BOOT
	#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
	#endif

	#endif /* __CONFIG_H */