| developer | 7b43f2d | 2022-04-29 17:53:25 +0800 | [diff] [blame^] | 1 | driver=nl80211 |
| 2 | interface=wifi0 |
| 3 | bridge=brlan0 |
| 4 | ssid=TurrisOmnia |
| 5 | |
| 6 | country_code=US |
| 7 | ieee80211d=1 |
| 8 | hw_mode=g |
| 9 | beacon_int=100 |
| 10 | channel=11 |
| 11 | |
| 12 | ieee80211n=1 |
| 13 | ht_capab=[SHORT-GI-20][SHORT-GI-40][TX-STBC][RX-STBC1] |
| 14 | |
| 15 | ap_isolate=1 |
| 16 | bss_load_update_period=60 |
| 17 | #chan_util_avg_period=600 |
| 18 | disassoc_low_ack=1 |
| 19 | preamble=1 |
| 20 | wmm_enabled=1 |
| 21 | ignore_broadcast_ssid=0 |
| 22 | uapsd_advertisement_enabled=1 |
| 23 | auth_algs=1 |
| 24 | rrm_neighbor_report=1 |
| 25 | bss_transition=1 |
| 26 | macaddr_acl=0 |
| 27 | bssid= |
| 28 | |
| 29 | #Security parameters |
| 30 | wpa=2 |
| 31 | wpa_pairwise=CCMP |
| 32 | wpa_key_mgmt=WPA-PSK |
| 33 | wpa_passphrase=rdk@1234 |
| 34 | |
| 35 | #WPS configuration lines |
| 36 | wps_state=0 |
| 37 | ap_setup_locked=1 |
| 38 | config_methods=virtual_push_button keypad |
| 39 | wps_pin_requests=/var/run/hostapd_wps_pin_requests.log |
| 40 | eap_server=1 |
| 41 | |
| 42 | #Interface for separate control program. hostapd_cli command will use it when trying to connect with hostapd. |
| 43 | ctrl_interface=/var/run/hostapd |
| 44 | |
| 45 | logger_syslog=127 |
| 46 | logger_syslog_level=2 |
| 47 | logger_stdout=127 |
| 48 | logger_stdout_level=2 |