recipes-wifi/linux-mt76/files/patches/1119-mt76-mt7915-add-mt7986-and-mt7916-pre-calibration.patch

From 6ba6a1fa68f9ef87d3357e94b688e534210baa0d Mon Sep 17 00:00:00 2001
From: Peter Chiu <chui-hao.chiu@mediatek.com>
Date: Fri, 20 May 2022 19:19:25 +0800
Subject: [PATCH 1119/1129] mt76: mt7915: add mt7986 and mt7916 pre-calibration

Add pre-calibration for mt7986 and mt7916. It has different data size
with mt7915. Group cal needs 54k and 94k for 2G + 5G and 2G + 6G,
respectively. DPD cal needs 300k.

Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
---
 mt7915/eeprom.c | 15 +++++------
 mt7915/eeprom.h |  1 +
 mt7915/mcu.c    | 72 ++++++++++++++++++++++++++++++++++++-------------
 3 files changed, 62 insertions(+), 26 deletions(-)

diff --git a/mt7915/eeprom.c b/mt7915/eeprom.c
index 24efa280..7bdd4d52 100644
--- a/mt7915/eeprom.c
+++ b/mt7915/eeprom.c
@@ -9,23 +9,22 @@ static int mt7915_eeprom_load_precal(struct mt7915_dev *dev)
 {
 	struct mt76_dev *mdev = &dev->mt76;
 	u8 *eeprom = mdev->eeprom.data;
-	u32 val = eeprom[MT_EE_DO_PRE_CAL];
-	u32 offs;
+	u32 offs = is_mt7915(&dev->mt76) ? MT_EE_DO_PRE_CAL : MT_EE_DO_PRE_CAL_V2;
+	u32 size, val = eeprom[offs];
 
-	if (!dev->flash_mode)
+	if (!dev->flash_mode || !val)
 		return 0;
 
-	if (val != (MT_EE_WIFI_CAL_DPD | MT_EE_WIFI_CAL_GROUP))
-		return 0;
+	size = mt7915_get_cal_group_size(dev) +
+	       (is_mt7915(&dev->mt76) ? MT_EE_CAL_DPD_SIZE_V1 : MT_EE_CAL_DPD_SIZE_V2);
 
-	val = MT_EE_CAL_GROUP_SIZE + MT_EE_CAL_DPD_SIZE;
-	dev->cal = devm_kzalloc(mdev->dev, val, GFP_KERNEL);
+	dev->cal = devm_kzalloc(mdev->dev, size, GFP_KERNEL);
 	if (!dev->cal)
 		return -ENOMEM;
 
 	offs = is_mt7915(&dev->mt76) ? MT_EE_PRECAL : MT_EE_PRECAL_V2;
 
-	return mt76_get_of_eeprom(mdev, dev->cal, offs, val);
+	return mt76_get_of_eeprom(mdev, dev->cal, offs, size);
 }
 
 static int mt7915_check_eeprom(struct mt7915_dev *dev)
diff --git a/mt7915/eeprom.h b/mt7915/eeprom.h
index 88aaa16a..fdae347e 100644
--- a/mt7915/eeprom.h
+++ b/mt7915/eeprom.h
@@ -19,6 +19,7 @@ enum mt7915_eeprom_field {
 	MT_EE_DDIE_FT_VERSION =	0x050,
 	MT_EE_DO_PRE_CAL =	0x062,
 	MT_EE_WIFI_CONF =	0x190,
+	MT_EE_DO_PRE_CAL_V2 =	0x19a,
 	MT_EE_RATE_DELTA_2G =	0x252,
 	MT_EE_RATE_DELTA_5G =	0x29d,
 	MT_EE_TX0_POWER_2G =	0x2fc,
diff --git a/mt7915/mcu.c b/mt7915/mcu.c
index 11732993..ca2e4029 100644
--- a/mt7915/mcu.c
+++ b/mt7915/mcu.c
@@ -2903,7 +2903,8 @@ static int mt7915_mcu_set_pre_cal(struct mt7915_dev *dev, u8 idx,
 int mt7915_mcu_apply_group_cal(struct mt7915_dev *dev)
 {
 	u8 idx = 0, *cal = dev->cal, *eep = dev->mt76.eeprom.data;
-	u32 total = MT_EE_CAL_GROUP_SIZE;
+	u32 total = mt7915_get_cal_group_size(dev);
+	u32 offs = is_mt7915(&dev->mt76) ? MT_EE_DO_PRE_CAL : MT_EE_DO_PRE_CAL_V2;
 
 	if (!(eep[offs] & MT_EE_WIFI_CAL_GROUP))
 		return 0;
@@ -2941,9 +2942,9 @@ static int mt7915_find_freq_idx(const u16 *freqs, int n_freqs, u16 cur)
 	return -1;
 }
 
-static int mt7915_dpd_freq_idx(u16 freq, u8 bw)
+static int mt7915_dpd_freq_idx(struct mt7915_dev *dev, u16 freq, u8 bw)
 {
-	static const u16 freq_list[] = {
+	const u16 freq_list_v1[] = {
 		5180, 5200, 5220, 5240,
 		5260, 5280, 5300, 5320,
 		5500, 5520, 5540, 5560,
@@ -2951,34 +2952,69 @@ static int mt7915_dpd_freq_idx(u16 freq, u8 bw)
 		5660, 5680, 5700, 5745,
 		5765, 5785, 5805, 5825
 	};
-	int offset_2g = ARRAY_SIZE(freq_list);
+	const u16 freq_list_v2[] = {
+		/* 6G BW20*/
+		5955, 5975, 5995, 6015,
+		6035, 6055, 6075, 6095,
+		6115, 6135, 6155, 6175,
+		6195, 6215, 6235, 6255,
+		6275, 6295, 6315, 6335,
+		6355, 6375, 6395, 6415,
+		6435, 6455, 6475, 6495,
+		6515, 6535, 6555, 6575,
+		6595, 6615, 6635, 6655,
+		6675, 6695, 6715, 6735,
+		6755, 6775, 6795, 6815,
+		6835, 6855, 6875, 6895,
+		6915, 6935, 6955, 6975,
+		6995, 7015, 7035, 7055,
+		7075, 7095, 7115,
+		/* 6G BW160 */
+		6025, 6185, 6345, 6505,
+		6665, 6825, 6985,
+		/* 5G BW20 */
+		5180, 5200, 5220, 5240,
+		5260, 5280, 5300, 5320,
+		5500, 5520, 5540, 5560,
+		5580, 5600, 5620, 5640,
+		5660, 5680, 5700, 5720,
+		5745, 5765, 5785, 5805,
+		5825, 5845, 5865, 5885,
+		/* 5G BW160 */
+		5250, 5570, 5815
+	};
+	const u16 *freq_list = freq_list_v1;
+	int n_freqs = ARRAY_SIZE(freq_list_v1);
 	int idx;
 
+	if (!is_mt7915(&dev->mt76)) {
+		freq_list = freq_list_v2;
+		n_freqs = ARRAY_SIZE(freq_list_v2);
+	}
+
 	if (freq < 4000) {
 		if (freq < 2432)
-			return offset_2g;
+			return n_freqs;
 		if (freq < 2457)
-			return offset_2g + 1;
+			return n_freqs + 1;
 
-		return offset_2g + 2;
+		return n_freqs + 2;
 	}
 
-	if (bw == NL80211_CHAN_WIDTH_80P80 || bw == NL80211_CHAN_WIDTH_160)
+	if (bw == NL80211_CHAN_WIDTH_80P80)
 		return -1;
 
 	if (bw != NL80211_CHAN_WIDTH_20) {
-		idx = mt7915_find_freq_idx(freq_list, ARRAY_SIZE(freq_list),
-					   freq + 10);
+		idx = mt7915_find_freq_idx(freq_list, n_freqs, freq + 10);
 		if (idx >= 0)
 			return idx;
 
-		idx = mt7915_find_freq_idx(freq_list, ARRAY_SIZE(freq_list),
-					   freq - 10);
+		idx = mt7915_find_freq_idx(freq_list, n_freqs, freq - 10);
 		if (idx >= 0)
 			return idx;
 	}
 
-	return mt7915_find_freq_idx(freq_list, ARRAY_SIZE(freq_list), freq);
+	return mt7915_find_freq_idx(freq_list, n_freqs, freq);
 }
 
 int mt7915_mcu_apply_tx_dpd(struct mt7915_phy *phy)
@@ -3010,24 +3046,24 @@ int mt7915_mcu_apply_tx_dpd(struct mt7915_phy *phy)
 	if (!(eep[offs] & dpd_mask))
 		return 0;
 
-	idx = mt7915_dpd_freq_idx(center_freq, chandef->width);
+	idx = mt7915_dpd_freq_idx(dev, center_freq, chandef->width);
 	if (idx < 0)
 		return -EINVAL;
 
 	/* Items: Tx DPD, Tx Flatness */
-	idx = idx * 2;
-	cal += MT_EE_CAL_GROUP_SIZE;
+	idx = idx * cal_num;
+	cal += mt7915_get_cal_group_size(dev) + (idx * MT_EE_CAL_UNIT);
 
-	while (total--) {
+	while (cal_num--) {
 		int ret;
 
-		cal += (idx * MT_EE_CAL_UNIT);
 		ret = mt7915_mcu_set_pre_cal(dev, idx, cal, MT_EE_CAL_UNIT,
 					     MCU_EXT_CMD(DPD_PRE_CAL_INFO));
 		if (ret)
 			return ret;
 
 		idx++;
+		cal += MT_EE_CAL_UNIT;
 	}
 
 	return 0;
-- 
2.25.1