| . /lib/functions/network.sh |
| . /lib/functions.sh |
| |
| wpa_supplicant_add_rate() { |
| local var="$1" |
| local val="$(($2 / 1000))" |
| local sub="$((($2 / 100) % 10))" |
| append $var "$val" "," |
| [ $sub -gt 0 ] && append $var "." |
| } |
| |
| hostapd_add_rate() { |
| local var="$1" |
| local val="$(($2 / 100))" |
| append $var "$val" " " |
| } |
| |
| hostapd_append_wep_key() { |
| local var="$1" |
| |
| wep_keyidx=0 |
| set_default key 1 |
| case "$key" in |
| [1234]) |
| for idx in 1 2 3 4; do |
| local zidx |
| zidx="$(($idx - 1))" |
| json_get_var ckey "key${idx}" |
| [ -n "$ckey" ] && \ |
| append $var "wep_key${zidx}=$(prepare_key_wep "$ckey")" "$N$T" |
| done |
| wep_keyidx="$((key - 1))" |
| ;; |
| *) |
| append $var "wep_key0=$(prepare_key_wep "$key")" "$N$T" |
| ;; |
| esac |
| } |
| |
| hostapd_append_wpa_key_mgmt() { |
| local auth_type_l="$(echo $auth_type | tr 'a-z' 'A-Z')" |
| |
| case "$auth_type" in |
| psk|eap) |
| append wpa_key_mgmt "WPA-$auth_type_l" |
| [ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-${auth_type_l}" |
| [ "${ieee80211w:-0}" -gt 0 ] && append wpa_key_mgmt "WPA-${auth_type_l}-SHA256" |
| ;; |
| eap192) |
| append wpa_key_mgmt "WPA-EAP-SUITE-B-192" |
| [ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-EAP-SHA384" |
| ;; |
| eap-eap192) |
| append wpa_key_mgmt "WPA-EAP-SUITE-B-192" |
| append wpa_key_mgmt "WPA-EAP" |
| [ "${ieee80211r:-0}" -gt 0 ] && { |
| append wpa_key_mgmt "FT-EAP-SHA384" |
| append wpa_key_mgmt "FT-EAP" |
| } |
| [ "${ieee80211w:-0}" -gt 0 ] && append wpa_key_mgmt "WPA-EAP-SHA256" |
| ;; |
| sae) |
| append wpa_key_mgmt "SAE" |
| [ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-SAE" |
| ;; |
| psk-sae) |
| append wpa_key_mgmt "WPA-PSK" |
| [ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-PSK" |
| [ "${ieee80211w:-0}" -gt 0 ] && append wpa_key_mgmt "WPA-PSK-SHA256" |
| append wpa_key_mgmt "SAE" |
| [ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-SAE" |
| ;; |
| owe) |
| append wpa_key_mgmt "OWE" |
| ;; |
| esac |
| |
| [ "$fils" -gt 0 ] && { |
| case "$auth_type" in |
| eap*) |
| append wpa_key_mgmt FILS-SHA256 |
| [ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt FT-FILS-SHA256 |
| ;; |
| esac |
| } |
| |
| [ "$auth_osen" = "1" ] && append wpa_key_mgmt "OSEN" |
| } |
| |
| hostapd_add_log_config() { |
| config_add_boolean \ |
| log_80211 \ |
| log_8021x \ |
| log_radius \ |
| log_wpa \ |
| log_driver \ |
| log_iapp \ |
| log_mlme |
| |
| config_add_int log_level |
| } |
| |
| hostapd_common_add_device_config() { |
| config_add_array basic_rate |
| config_add_array supported_rates |
| config_add_string beacon_rate |
| |
| config_add_string country country3 |
| config_add_boolean country_ie doth |
| config_add_boolean spectrum_mgmt_required |
| config_add_int local_pwr_constraint |
| config_add_string require_mode |
| config_add_boolean legacy_rates |
| config_add_int cell_density |
| config_add_int rts_threshold |
| config_add_int rssi_reject_assoc_rssi |
| config_add_int rssi_ignore_probe_request |
| config_add_int maxassoc |
| |
| config_add_string acs_chan_bias |
| config_add_array hostapd_options |
| |
| config_add_int airtime_mode |
| |
| hostapd_add_log_config |
| } |
| |
| hostapd_prepare_device_config() { |
| local config="$1" |
| local driver="$2" |
| |
| local base_cfg= |
| |
| json_get_vars country country3 country_ie beacon_int:100 doth require_mode legacy_rates \ |
| acs_chan_bias local_pwr_constraint spectrum_mgmt_required airtime_mode cell_density \ |
| rts_threshold beacon_rate rssi_reject_assoc_rssi rssi_ignore_probe_request maxassoc |
| |
| hostapd_set_log_options base_cfg |
| |
| set_default country_ie 1 |
| set_default spectrum_mgmt_required 0 |
| set_default doth 1 |
| set_default legacy_rates 0 |
| set_default airtime_mode 0 |
| set_default cell_density 0 |
| |
| [ -n "$country" ] && { |
| append base_cfg "country_code=$country" "$N" |
| [ -n "$country3" ] && append base_cfg "country3=$country3" "$N" |
| |
| [ "$country_ie" -gt 0 ] && { |
| append base_cfg "ieee80211d=1" "$N" |
| [ -n "$local_pwr_constraint" ] && append base_cfg "local_pwr_constraint=$local_pwr_constraint" "$N" |
| [ "$spectrum_mgmt_required" -gt 0 ] && append base_cfg "spectrum_mgmt_required=$spectrum_mgmt_required" "$N" |
| } |
| [ "$hwmode" = "a" -a "$doth" -gt 0 ] && append base_cfg "ieee80211h=1" "$N" |
| } |
| |
| [ -n "$acs_chan_bias" ] && append base_cfg "acs_chan_bias=$acs_chan_bias" "$N" |
| |
| local brlist= br |
| json_get_values basic_rate_list basic_rate |
| local rlist= r |
| json_get_values rate_list supported_rates |
| |
| [ -n "$hwmode" ] && append base_cfg "hw_mode=$hwmode" "$N" |
| if [ "$hwmode" = "g" ] || [ "$hwmode" = "a" ]; then |
| [ -n "$require_mode" ] && legacy_rates=0 |
| case "$require_mode" in |
| n) append base_cfg "require_ht=1" "$N";; |
| ac) append base_cfg "require_vht=1" "$N";; |
| esac |
| fi |
| case "$hwmode" in |
| b) |
| if [ "$cell_density" -eq 1 ]; then |
| set_default rate_list "5500 11000" |
| set_default basic_rate_list "5500 11000" |
| elif [ "$cell_density" -ge 2 ]; then |
| set_default rate_list "11000" |
| set_default basic_rate_list "11000" |
| fi |
| ;; |
| g) |
| if [ "$cell_density" -eq 0 ] || [ "$cell_density" -eq 1 ]; then |
| if [ "$legacy_rates" -eq 0 ]; then |
| set_default rate_list "6000 9000 12000 18000 24000 36000 48000 54000" |
| set_default basic_rate_list "6000 12000 24000" |
| elif [ "$cell_density" -eq 1 ]; then |
| set_default rate_list "5500 6000 9000 11000 12000 18000 24000 36000 48000 54000" |
| set_default basic_rate_list "5500 11000" |
| fi |
| elif [ "$cell_density" -ge 3 ] && [ "$legacy_rates" -ne 0 ] || [ "$cell_density" -eq 2 ]; then |
| if [ "$legacy_rates" -eq 0 ]; then |
| set_default rate_list "12000 18000 24000 36000 48000 54000" |
| set_default basic_rate_list "12000 24000" |
| else |
| set_default rate_list "11000 12000 18000 24000 36000 48000 54000" |
| set_default basic_rate_list "11000" |
| fi |
| elif [ "$cell_density" -ge 3 ]; then |
| set_default rate_list "24000 36000 48000 54000" |
| set_default basic_rate_list "24000" |
| fi |
| ;; |
| a) |
| if [ "$cell_density" -eq 1 ]; then |
| set_default rate_list "6000 9000 12000 18000 24000 36000 48000 54000" |
| set_default basic_rate_list "6000 12000 24000" |
| elif [ "$cell_density" -eq 2 ]; then |
| set_default rate_list "12000 18000 24000 36000 48000 54000" |
| set_default basic_rate_list "12000 24000" |
| elif [ "$cell_density" -ge 3 ]; then |
| set_default rate_list "24000 36000 48000 54000" |
| set_default basic_rate_list "24000" |
| fi |
| ;; |
| esac |
| |
| for r in $rate_list; do |
| hostapd_add_rate rlist "$r" |
| done |
| |
| for br in $basic_rate_list; do |
| hostapd_add_rate brlist "$br" |
| done |
| |
| [ -n "$rssi_reject_assoc_rssi" ] && append base_cfg "rssi_reject_assoc_rssi=$rssi_reject_assoc_rssi" "$N" |
| [ -n "$rssi_ignore_probe_request" ] && append base_cfg "rssi_ignore_probe_request=$rssi_ignore_probe_request" "$N" |
| [ -n "$beacon_rate" ] && append base_cfg "beacon_rate=$beacon_rate" "$N" |
| [ -n "$rlist" ] && append base_cfg "supported_rates=$rlist" "$N" |
| [ -n "$brlist" ] && append base_cfg "basic_rates=$brlist" "$N" |
| append base_cfg "beacon_int=$beacon_int" "$N" |
| [ -n "$rts_threshold" ] && append base_cfg "rts_threshold=$rts_threshold" "$N" |
| [ "$airtime_mode" -gt 0 ] && append base_cfg "airtime_mode=$airtime_mode" "$N" |
| [ -n "$maxassoc" ] && append base_cfg "iface_max_num_sta=$maxassoc" "$N" |
| |
| json_get_values opts hostapd_options |
| for val in $opts; do |
| append base_cfg "$val" "$N" |
| done |
| |
| cat > "$config" <<EOF |
| driver=$driver |
| $base_cfg |
| EOF |
| } |
| |
| hostapd_common_add_bss_config() { |
| config_add_string 'bssid:macaddr' 'ssid:string' |
| config_add_boolean wds wmm uapsd hidden utf8_ssid ppsk |
| |
| config_add_int maxassoc max_inactivity |
| config_add_boolean disassoc_low_ack isolate short_preamble skip_inactivity_poll |
| |
| config_add_int \ |
| wep_rekey eap_reauth_period \ |
| wpa_group_rekey wpa_pair_rekey wpa_master_rekey |
| config_add_boolean wpa_strict_rekey |
| config_add_boolean wpa_disable_eapol_key_retries |
| |
| config_add_boolean tdls_prohibit |
| |
| config_add_boolean rsn_preauth auth_cache |
| config_add_int ieee80211w |
| config_add_int eapol_version |
| |
| config_add_array auth_server acct_server |
| config_add_string 'server:host' |
| config_add_string auth_secret key |
| config_add_int 'auth_port:port' 'port:port' |
| |
| config_add_string acct_secret |
| config_add_int acct_port |
| config_add_int acct_interval |
| |
| config_add_int bss_load_update_period chan_util_avg_period |
| |
| config_add_string dae_client |
| config_add_string dae_secret |
| config_add_int dae_port |
| |
| config_add_string nasid |
| config_add_string ownip |
| config_add_string radius_client_addr |
| config_add_string iapp_interface |
| config_add_string eap_type ca_cert client_cert identity anonymous_identity auth priv_key priv_key_pwd |
| config_add_boolean ca_cert_usesystem ca_cert2_usesystem |
| config_add_string subject_match subject_match2 |
| config_add_array altsubject_match altsubject_match2 |
| config_add_array domain_match domain_match2 domain_suffix_match domain_suffix_match2 |
| config_add_string ieee80211w_mgmt_cipher |
| |
| config_add_int dynamic_vlan vlan_naming vlan_no_bridge |
| config_add_string vlan_tagged_interface vlan_bridge |
| config_add_string vlan_file |
| |
| config_add_string 'key1:wepkey' 'key2:wepkey' 'key3:wepkey' 'key4:wepkey' 'password:wpakey' |
| |
| config_add_string wpa_psk_file |
| |
| config_add_int multi_ap |
| |
| config_add_boolean wps_pushbutton wps_label ext_registrar wps_pbc_in_m1 |
| config_add_int wps_ap_setup_locked wps_independent |
| config_add_string wps_device_type wps_device_name wps_manufacturer wps_pin |
| config_add_string multi_ap_backhaul_ssid multi_ap_backhaul_key |
| |
| config_add_boolean wnm_sleep_mode wnm_sleep_mode_no_keys bss_transition mbo |
| config_add_int time_advertisement |
| config_add_string time_zone |
| config_add_string vendor_elements |
| |
| config_add_boolean ieee80211k rrm_neighbor_report rrm_beacon_report |
| |
| config_add_boolean ftm_responder stationary_ap |
| config_add_string lci civic |
| |
| config_add_boolean ieee80211r pmk_r1_push ft_psk_generate_local ft_over_ds |
| config_add_int r0_key_lifetime reassociation_deadline |
| config_add_string mobility_domain r1_key_holder |
| config_add_array r0kh r1kh |
| |
| config_add_int ieee80211w_max_timeout ieee80211w_retry_timeout |
| |
| config_add_string macfilter 'macfile:file' |
| config_add_array 'maclist:list(macaddr)' |
| |
| config_add_array bssid_blacklist |
| config_add_array bssid_whitelist |
| |
| config_add_int mcast_rate |
| config_add_array basic_rate |
| config_add_array supported_rates |
| |
| config_add_boolean sae_require_mfp |
| config_add_int sae_pwe |
| |
| config_add_string 'owe_transition_bssid:macaddr' 'owe_transition_ssid:string' |
| config_add_string owe_transition_ifname |
| |
| config_add_boolean iw_enabled iw_internet iw_asra iw_esr iw_uesa |
| config_add_int iw_access_network_type iw_venue_group iw_venue_type |
| config_add_int iw_ipaddr_type_availability iw_gas_address3 |
| config_add_string iw_hessid iw_network_auth_type iw_qos_map_set |
| config_add_array iw_roaming_consortium iw_domain_name iw_anqp_3gpp_cell_net iw_nai_realm |
| config_add_array iw_anqp_elem iw_venue_name iw_venue_url |
| |
| config_add_boolean hs20 disable_dgaf osen |
| config_add_int anqp_domain_id |
| config_add_int hs20_deauth_req_timeout |
| config_add_array hs20_oper_friendly_name |
| config_add_array osu_provider |
| config_add_array operator_icon |
| config_add_array hs20_conn_capab |
| config_add_string osu_ssid hs20_wan_metrics hs20_operating_class hs20_t_c_filename hs20_t_c_timestamp |
| |
| config_add_string hs20_t_c_server_url |
| |
| config_add_array airtime_sta_weight |
| config_add_int airtime_bss_weight airtime_bss_limit |
| |
| config_add_boolean multicast_to_unicast multicast_to_unicast_all proxy_arp per_sta_vif |
| |
| config_add_array hostapd_bss_options |
| config_add_boolean default_disabled |
| |
| config_add_boolean request_cui |
| config_add_array radius_auth_req_attr |
| config_add_array radius_acct_req_attr |
| |
| config_add_int eap_server |
| config_add_string eap_user_file ca_cert server_cert private_key private_key_passwd server_id |
| |
| config_add_boolean fils |
| config_add_string fils_dhcp |
| |
| config_add_int ocv |
| } |
| |
| hostapd_set_vlan_file() { |
| local ifname="$1" |
| local vlan="$2" |
| json_get_vars name vid |
| echo "${vid} ${ifname}-${name}" >> /var/run/hostapd-${ifname}.vlan |
| wireless_add_vlan "${vlan}" "${ifname}-${name}" |
| } |
| |
| hostapd_set_vlan() { |
| local ifname="$1" |
| |
| rm -f /var/run/hostapd-${ifname}.vlan |
| for_each_vlan hostapd_set_vlan_file ${ifname} |
| } |
| |
| hostapd_set_psk_file() { |
| local ifname="$1" |
| local vlan="$2" |
| local vlan_id="" |
| |
| json_get_vars mac vid key |
| set_default mac "00:00:00:00:00:00" |
| [ -n "$vid" ] && vlan_id="vlanid=$vid " |
| echo "${vlan_id} ${mac} ${key}" >> /var/run/hostapd-${ifname}.psk |
| } |
| |
| hostapd_set_psk() { |
| local ifname="$1" |
| |
| rm -f /var/run/hostapd-${ifname}.psk |
| for_each_station hostapd_set_psk_file ${ifname} |
| } |
| |
| append_iw_roaming_consortium() { |
| [ -n "$1" ] && append bss_conf "roaming_consortium=$1" "$N" |
| } |
| |
| append_iw_domain_name() { |
| if [ -z "$iw_domain_name_conf" ]; then |
| iw_domain_name_conf="$1" |
| else |
| iw_domain_name_conf="$iw_domain_name_conf,$1" |
| fi |
| } |
| |
| append_iw_anqp_3gpp_cell_net() { |
| if [ -z "$iw_anqp_3gpp_cell_net_conf" ]; then |
| iw_anqp_3gpp_cell_net_conf="$1" |
| else |
| iw_anqp_3gpp_cell_net_conf="$iw_anqp_3gpp_cell_net_conf:$1" |
| fi |
| } |
| |
| append_iw_anqp_elem() { |
| [ -n "$1" ] && append bss_conf "anqp_elem=$1" "$N" |
| } |
| |
| append_iw_nai_realm() { |
| [ -n "$1" ] && append bss_conf "nai_realm=$1" "$N" |
| } |
| |
| append_iw_venue_name() { |
| append bss_conf "venue_name=$1" "$N" |
| } |
| |
| append_iw_venue_url() { |
| append bss_conf "venue_url=$1" "$N" |
| } |
| |
| append_hs20_oper_friendly_name() { |
| append bss_conf "hs20_oper_friendly_name=$1" "$N" |
| } |
| |
| append_osu_provider_friendly_name() { |
| append bss_conf "osu_friendly_name=$1" "$N" |
| } |
| |
| append_osu_provider_service_desc() { |
| append bss_conf "osu_service_desc=$1" "$N" |
| } |
| |
| append_hs20_icon() { |
| local width height lang type path |
| config_get width "$1" width |
| config_get height "$1" height |
| config_get lang "$1" lang |
| config_get type "$1" type |
| config_get path "$1" path |
| |
| append bss_conf "hs20_icon=$width:$height:$lang:$type:$1:$path" "$N" |
| } |
| |
| append_hs20_icons() { |
| config_load wireless |
| config_foreach append_hs20_icon hs20-icon |
| } |
| |
| append_operator_icon() { |
| append bss_conf "operator_icon=$1" "$N" |
| } |
| |
| append_osu_icon() { |
| append bss_conf "osu_icon=$1" "$N" |
| } |
| |
| append_osu_provider() { |
| local cfgtype osu_server_uri osu_friendly_name osu_nai osu_nai2 osu_method_list |
| |
| config_load wireless |
| config_get cfgtype "$1" TYPE |
| [ "$cfgtype" != "osu-provider" ] && return |
| |
| append bss_conf "# provider $1" "$N" |
| config_get osu_server_uri "$1" osu_server_uri |
| config_get osu_nai "$1" osu_nai |
| config_get osu_nai2 "$1" osu_nai2 |
| config_get osu_method_list "$1" osu_method |
| |
| append bss_conf "osu_server_uri=$osu_server_uri" "$N" |
| append bss_conf "osu_nai=$osu_nai" "$N" |
| append bss_conf "osu_nai2=$osu_nai2" "$N" |
| append bss_conf "osu_method_list=$osu_method_list" "$N" |
| |
| config_list_foreach "$1" osu_service_desc append_osu_provider_service_desc |
| config_list_foreach "$1" osu_friendly_name append_osu_friendly_name |
| config_list_foreach "$1" osu_icon append_osu_icon |
| |
| append bss_conf "$N" |
| } |
| |
| append_hs20_conn_capab() { |
| [ -n "$1" ] && append bss_conf "hs20_conn_capab=$1" "$N" |
| } |
| |
| append_radius_acct_req_attr() { |
| [ -n "$1" ] && append bss_conf "radius_acct_req_attr=$1" "$N" |
| } |
| |
| append_radius_auth_req_attr() { |
| [ -n "$1" ] && append bss_conf "radius_auth_req_attr=$1" "$N" |
| } |
| |
| append_airtime_sta_weight() { |
| [ -n "$1" ] && append bss_conf "airtime_sta_weight=$1" "$N" |
| } |
| |
| append_auth_server() { |
| [ -n "$1" ] || return |
| append bss_conf "auth_server_addr=$1" "$N" |
| append bss_conf "auth_server_port=$auth_port" "$N" |
| [ -n "$auth_secret" ] && append bss_conf "auth_server_shared_secret=$auth_secret" "$N" |
| } |
| |
| append_acct_server() { |
| [ -n "$1" ] || return |
| append bss_conf "acct_server_addr=$1" "$N" |
| append bss_conf "acct_server_port=$acct_port" "$N" |
| [ -n "$acct_secret" ] && append bss_conf "acct_server_shared_secret=$acct_secret" "$N" |
| } |
| |
| hostapd_set_bss_options() { |
| local var="$1" |
| local phy="$2" |
| local vif="$3" |
| |
| wireless_vif_parse_encryption |
| |
| local bss_conf bss_md5sum ft_key |
| local wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey wpa_key_mgmt |
| |
| json_get_vars \ |
| wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey wpa_strict_rekey \ |
| wpa_disable_eapol_key_retries tdls_prohibit \ |
| maxassoc max_inactivity disassoc_low_ack isolate auth_cache \ |
| wps_pushbutton wps_label ext_registrar wps_pbc_in_m1 wps_ap_setup_locked \ |
| wps_independent wps_device_type wps_device_name wps_manufacturer wps_pin \ |
| macfilter ssid utf8_ssid wmm uapsd hidden short_preamble rsn_preauth \ |
| iapp_interface eapol_version dynamic_vlan ieee80211w nasid \ |
| acct_secret acct_port acct_interval \ |
| bss_load_update_period chan_util_avg_period sae_require_mfp sae_pwe \ |
| multi_ap multi_ap_backhaul_ssid multi_ap_backhaul_key skip_inactivity_poll \ |
| ppsk airtime_bss_weight airtime_bss_limit airtime_sta_weight \ |
| multicast_to_unicast_all proxy_arp per_sta_vif \ |
| eap_server eap_user_file ca_cert server_cert private_key private_key_passwd server_id \ |
| vendor_elements fils ocv |
| |
| set_default fils 0 |
| set_default isolate 0 |
| set_default maxassoc 0 |
| set_default max_inactivity 0 |
| set_default short_preamble 1 |
| set_default disassoc_low_ack 1 |
| set_default skip_inactivity_poll 0 |
| set_default hidden 0 |
| set_default wmm 1 |
| set_default uapsd 1 |
| set_default wpa_disable_eapol_key_retries 0 |
| set_default tdls_prohibit 0 |
| set_default eapol_version $((wpa & 1)) |
| set_default acct_port 1813 |
| set_default bss_load_update_period 60 |
| set_default chan_util_avg_period 600 |
| set_default utf8_ssid 1 |
| set_default multi_ap 0 |
| set_default ppsk 0 |
| set_default airtime_bss_weight 0 |
| set_default airtime_bss_limit 0 |
| set_default eap_server 0 |
| |
| /usr/sbin/hostapd -vfils || fils=0 |
| |
| append bss_conf "ctrl_interface=/var/run/hostapd" |
| if [ "$isolate" -gt 0 ]; then |
| append bss_conf "ap_isolate=$isolate" "$N" |
| fi |
| if [ "$maxassoc" -gt 0 ]; then |
| append bss_conf "max_num_sta=$maxassoc" "$N" |
| fi |
| if [ "$max_inactivity" -gt 0 ]; then |
| append bss_conf "ap_max_inactivity=$max_inactivity" "$N" |
| fi |
| |
| [ "$airtime_bss_weight" -gt 0 ] && append bss_conf "airtime_bss_weight=$airtime_bss_weight" "$N" |
| [ "$airtime_bss_limit" -gt 0 ] && append bss_conf "airtime_bss_limit=$airtime_bss_limit" "$N" |
| json_for_each_item append_airtime_sta_weight airtime_sta_weight |
| |
| append bss_conf "bss_load_update_period=$bss_load_update_period" "$N" |
| append bss_conf "chan_util_avg_period=$chan_util_avg_period" "$N" |
| append bss_conf "disassoc_low_ack=$disassoc_low_ack" "$N" |
| append bss_conf "skip_inactivity_poll=$skip_inactivity_poll" "$N" |
| append bss_conf "preamble=$short_preamble" "$N" |
| append bss_conf "wmm_enabled=$wmm" "$N" |
| append bss_conf "ignore_broadcast_ssid=$hidden" "$N" |
| append bss_conf "uapsd_advertisement_enabled=$uapsd" "$N" |
| append bss_conf "utf8_ssid=$utf8_ssid" "$N" |
| append bss_conf "multi_ap=$multi_ap" "$N" |
| [ -n "$vendor_elements" ] && append bss_conf "vendor_elements=$vendor_elements" "$N" |
| |
| [ "$tdls_prohibit" -gt 0 ] && append bss_conf "tdls_prohibit=$tdls_prohibit" "$N" |
| |
| [ "$wpa" -gt 0 ] && { |
| [ -n "$wpa_group_rekey" ] && append bss_conf "wpa_group_rekey=$wpa_group_rekey" "$N" |
| [ -n "$wpa_pair_rekey" ] && append bss_conf "wpa_ptk_rekey=$wpa_pair_rekey" "$N" |
| [ -n "$wpa_master_rekey" ] && append bss_conf "wpa_gmk_rekey=$wpa_master_rekey" "$N" |
| [ -n "$wpa_strict_rekey" ] && append bss_conf "wpa_strict_rekey=$wpa_strict_rekey" "$N" |
| } |
| |
| set_default nasid "${macaddr//\:}" |
| append bss_conf "nas_identifier=$nasid" "$N" |
| |
| [ -n "$acct_interval" ] && \ |
| append bss_conf "radius_acct_interim_interval=$acct_interval" "$N" |
| json_for_each_item append_acct_server acct_server |
| json_for_each_item append_radius_acct_req_attr radius_acct_req_attr |
| |
| [ -n "$ocv" ] && append bss_conf "ocv=$ocv" "$N" |
| |
| case "$auth_type" in |
| sae|owe|eap192|eap-eap192) |
| set_default ieee80211w 2 |
| set_default sae_require_mfp 1 |
| set_default sae_pwe 2 |
| ;; |
| psk-sae) |
| set_default ieee80211w 1 |
| set_default sae_require_mfp 1 |
| set_default sae_pwe 2 |
| ;; |
| esac |
| [ -n "$sae_require_mfp" ] && append bss_conf "sae_require_mfp=$sae_require_mfp" "$N" |
| [ -n "$sae_pwe" ] && append bss_conf "sae_pwe=$sae_pwe" "$N" |
| |
| local vlan_possible="" |
| |
| case "$auth_type" in |
| none|owe) |
| json_get_vars owe_transition_bssid owe_transition_ssid owe_transition_ifname |
| |
| [ -n "$owe_transition_ssid" ] && append bss_conf "owe_transition_ssid=\"$owe_transition_ssid\"" "$N" |
| [ -n "$owe_transition_bssid" ] && append bss_conf "owe_transition_bssid=$owe_transition_bssid" "$N" |
| [ -n "$owe_transition_ifname" ] && append bss_conf "owe_transition_ifname=$owe_transition_ifname" "$N" |
| |
| wps_possible=1 |
| # Here we make the assumption that if we're in open mode |
| # with WPS enabled, we got to be in unconfigured state. |
| wps_not_configured=1 |
| ;; |
| psk|sae|psk-sae) |
| json_get_vars key wpa_psk_file |
| if [ "$auth_type" = "psk" ] && [ "$ppsk" -ne 0 ] ; then |
| json_get_vars auth_secret auth_port |
| set_default auth_port 1812 |
| json_for_each_item append_auth_server auth_server |
| append bss_conf "macaddr_acl=2" "$N" |
| append bss_conf "wpa_psk_radius=2" "$N" |
| elif [ ${#key} -eq 64 ]; then |
| append bss_conf "wpa_psk=$key" "$N" |
| elif [ ${#key} -ge 8 ] && [ ${#key} -le 63 ]; then |
| append bss_conf "wpa_passphrase=$key" "$N" |
| elif [ -n "$key" ] || [ -z "$wpa_psk_file" ]; then |
| wireless_setup_vif_failed INVALID_WPA_PSK |
| return 1 |
| fi |
| [ -z "$wpa_psk_file" ] && set_default wpa_psk_file /var/run/hostapd-$ifname.psk |
| [ -n "$wpa_psk_file" ] && { |
| [ -e "$wpa_psk_file" ] || touch "$wpa_psk_file" |
| append bss_conf "wpa_psk_file=$wpa_psk_file" "$N" |
| } |
| [ "$eapol_version" -ge "1" -a "$eapol_version" -le "2" ] && append bss_conf "eapol_version=$eapol_version" "$N" |
| |
| set_default dynamic_vlan 0 |
| vlan_possible=1 |
| wps_possible=1 |
| ;; |
| eap|eap192|eap-eap192) |
| json_get_vars \ |
| auth_server auth_secret auth_port \ |
| dae_client dae_secret dae_port \ |
| dynamic_ownip ownip radius_client_addr \ |
| eap_reauth_period request_cui \ |
| erp_domain mobility_domain \ |
| fils_realm fils_dhcp |
| |
| # radius can provide VLAN ID for clients |
| vlan_possible=1 |
| |
| set_default dynamic_ownip 1 |
| |
| # legacy compatibility |
| [ -n "$auth_server" ] || json_get_var auth_server server |
| [ -n "$auth_port" ] || json_get_var auth_port port |
| [ -n "$auth_secret" ] || json_get_var auth_secret key |
| |
| [ "$fils" -gt 0 ] && { |
| set_default erp_domain "$mobility_domain" |
| set_default erp_domain "$(echo "$ssid" | md5sum | head -c 8)" |
| set_default fils_realm "$erp_domain" |
| |
| append bss_conf "erp_send_reauth_start=1" "$N" |
| append bss_conf "erp_domain=$erp_domain" "$N" |
| append bss_conf "fils_realm=$fils_realm" "$N" |
| append bss_conf "fils_cache_id=$(echo "$fils_realm" | md5sum | head -c 4)" "$N" |
| |
| [ "$fils_dhcp" = "*" ] && { |
| json_get_values network network |
| fils_dhcp= |
| for net in $network; do |
| fils_dhcp="$(ifstatus "$net" | jsonfilter -e '@.data.dhcpserver')" |
| [ -n "$fils_dhcp" ] && break |
| done |
| |
| [ -z "$fils_dhcp" -a -n "$network_bridge" -a -n "$network_ifname" ] && \ |
| fils_dhcp="$(udhcpc -B -n -q -s /lib/netifd/dhcp-get-server.sh -t 1 -i "$network_ifname" 2>/dev/null)" |
| } |
| [ -n "$fils_dhcp" ] && append bss_conf "dhcp_server=$fils_dhcp" "$N" |
| } |
| |
| set_default auth_port 1812 |
| set_default dae_port 3799 |
| set_default request_cui 0 |
| |
| [ "$eap_server" -eq 0 ] && json_for_each_item append_auth_server auth_server |
| [ "$request_cui" -gt 0 ] && append bss_conf "radius_request_cui=$request_cui" "$N" |
| [ -n "$eap_reauth_period" ] && append bss_conf "eap_reauth_period=$eap_reauth_period" "$N" |
| |
| [ -n "$dae_client" -a -n "$dae_secret" ] && { |
| append bss_conf "radius_das_port=$dae_port" "$N" |
| append bss_conf "radius_das_client=$dae_client $dae_secret" "$N" |
| } |
| json_for_each_item append_radius_auth_req_attr radius_auth_req_attr |
| |
| if [ -n "$ownip" ]; then |
| append bss_conf "own_ip_addr=$ownip" "$N" |
| elif [ "$dynamic_ownip" -gt 0 ]; then |
| append bss_conf "dynamic_own_ip_addr=$dynamic_ownip" "$N" |
| fi |
| |
| [ -n "$radius_client_addr" ] && append bss_conf "radius_client_addr=$radius_client_addr" "$N" |
| append bss_conf "eapol_key_index_workaround=1" "$N" |
| append bss_conf "ieee8021x=1" "$N" |
| |
| [ "$eapol_version" -ge "1" -a "$eapol_version" -le "2" ] && append bss_conf "eapol_version=$eapol_version" "$N" |
| ;; |
| wep) |
| local wep_keyidx=0 |
| json_get_vars key |
| hostapd_append_wep_key bss_conf |
| append bss_conf "wep_default_key=$wep_keyidx" "$N" |
| [ -n "$wep_rekey" ] && append bss_conf "wep_rekey_period=$wep_rekey" "$N" |
| ;; |
| esac |
| |
| case "$auth_type" in |
| none|owe|psk|sae|psk-sae|wep) |
| json_get_vars \ |
| auth_server auth_port auth_secret \ |
| ownip radius_client_addr |
| |
| [ -n "$auth_server" ] && { |
| set_default auth_port 1812 |
| |
| json_for_each_item append_auth_server auth_server |
| [ -n "$ownip" ] && append bss_conf "own_ip_addr=$ownip" "$N" |
| [ -n "$radius_client_addr" ] && append bss_conf "radius_client_addr=$radius_client_addr" "$N" |
| append bss_conf "macaddr_acl=2" "$N" |
| } |
| ;; |
| esac |
| |
| local auth_algs="$((($auth_mode_shared << 1) | $auth_mode_open))" |
| append bss_conf "auth_algs=${auth_algs:-1}" "$N" |
| append bss_conf "wpa=$wpa" "$N" |
| [ -n "$wpa_pairwise" ] && append bss_conf "wpa_pairwise=$wpa_pairwise" "$N" |
| |
| set_default wps_pushbutton 0 |
| set_default wps_label 0 |
| set_default wps_pbc_in_m1 0 |
| |
| config_methods= |
| [ "$wps_pushbutton" -gt 0 ] && append config_methods push_button |
| [ "$wps_label" -gt 0 ] && append config_methods label |
| |
| # WPS not possible on Multi-AP backhaul-only SSID |
| [ "$multi_ap" = 1 ] && wps_possible= |
| |
| [ -n "$wps_possible" -a -n "$config_methods" ] && { |
| set_default ext_registrar 0 |
| set_default wps_device_type "6-0050F204-1" |
| set_default wps_device_name "OpenWrt AP" |
| set_default wps_manufacturer "www.openwrt.org" |
| set_default wps_independent 1 |
| |
| wps_state=2 |
| [ -n "$wps_not_configured" ] && wps_state=1 |
| |
| [ "$ext_registrar" -gt 0 -a -n "$network_bridge" ] && append bss_conf "upnp_iface=$network_bridge" "$N" |
| |
| append bss_conf "eap_server=1" "$N" |
| [ -n "$wps_pin" ] && append bss_conf "ap_pin=$wps_pin" "$N" |
| append bss_conf "wps_state=$wps_state" "$N" |
| append bss_conf "device_type=$wps_device_type" "$N" |
| append bss_conf "device_name=$wps_device_name" "$N" |
| append bss_conf "manufacturer=$wps_manufacturer" "$N" |
| append bss_conf "config_methods=$config_methods" "$N" |
| append bss_conf "wps_independent=$wps_independent" "$N" |
| [ -n "$wps_ap_setup_locked" ] && append bss_conf "ap_setup_locked=$wps_ap_setup_locked" "$N" |
| [ "$wps_pbc_in_m1" -gt 0 ] && append bss_conf "pbc_in_m1=$wps_pbc_in_m1" "$N" |
| [ "$multi_ap" -gt 0 ] && [ -n "$multi_ap_backhaul_ssid" ] && { |
| append bss_conf "multi_ap_backhaul_ssid=\"$multi_ap_backhaul_ssid\"" "$N" |
| if [ -z "$multi_ap_backhaul_key" ]; then |
| : |
| elif [ ${#multi_ap_backhaul_key} -lt 8 ]; then |
| wireless_setup_vif_failed INVALID_WPA_PSK |
| return 1 |
| elif [ ${#multi_ap_backhaul_key} -eq 64 ]; then |
| append bss_conf "multi_ap_backhaul_wpa_psk=$multi_ap_backhaul_key" "$N" |
| else |
| append bss_conf "multi_ap_backhaul_wpa_passphrase=$multi_ap_backhaul_key" "$N" |
| fi |
| } |
| } |
| |
| append bss_conf "ssid=$ssid" "$N" |
| [ -n "$network_bridge" ] && append bss_conf "bridge=$network_bridge${N}wds_bridge=" "$N" |
| [ -n "$network_ifname" ] && append bss_conf "snoop_iface=$network_ifname" "$N" |
| [ -n "$iapp_interface" ] && { |
| local ifname |
| network_get_device ifname "$iapp_interface" || ifname="$iapp_interface" |
| append bss_conf "iapp_interface=$ifname" "$N" |
| } |
| |
| json_get_vars time_advertisement time_zone wnm_sleep_mode wnm_sleep_mode_no_keys bss_transition mbo |
| set_default bss_transition 0 |
| set_default wnm_sleep_mode 0 |
| set_default wnm_sleep_mode_no_keys 0 |
| set_default mbo 0 |
| |
| [ -n "$time_advertisement" ] && append bss_conf "time_advertisement=$time_advertisement" "$N" |
| [ -n "$time_zone" ] && append bss_conf "time_zone=$time_zone" "$N" |
| if [ "$wnm_sleep_mode" -eq "1" ]; then |
| append bss_conf "wnm_sleep_mode=1" "$N" |
| [ "$wnm_sleep_mode_no_keys" -eq "1" ] && append bss_conf "wnm_sleep_mode_no_keys=1" "$N" |
| fi |
| [ "$bss_transition" -eq "1" ] && append bss_conf "bss_transition=1" "$N" |
| [ "$mbo" -eq 1 ] && append bss_conf "mbo=1" "$N" |
| |
| json_get_vars ieee80211k rrm_neighbor_report rrm_beacon_report |
| set_default ieee80211k 0 |
| if [ "$ieee80211k" -eq "1" ]; then |
| set_default rrm_neighbor_report 1 |
| set_default rrm_beacon_report 1 |
| else |
| set_default rrm_neighbor_report 0 |
| set_default rrm_beacon_report 0 |
| fi |
| |
| [ "$rrm_neighbor_report" -eq "1" ] && append bss_conf "rrm_neighbor_report=1" "$N" |
| [ "$rrm_beacon_report" -eq "1" ] && append bss_conf "rrm_beacon_report=1" "$N" |
| |
| json_get_vars ftm_responder stationary_ap lci civic |
| set_default ftm_responder 0 |
| if [ "$ftm_responder" -eq "1" ]; then |
| set_default stationary_ap 0 |
| iw phy "$phy" info | grep -q "ENABLE_FTM_RESPONDER" && { |
| append bss_conf "ftm_responder=1" "$N" |
| [ "$stationary_ap" -eq "1" ] && append bss_conf "stationary_ap=1" "$N" |
| [ -n "$lci" ] && append bss_conf "lci=$lci" "$N" |
| [ -n "$civic" ] && append bss_conf "civic=$civic" "$N" |
| } |
| fi |
| |
| if [ "$wpa" -ge "1" ]; then |
| json_get_vars ieee80211r |
| set_default ieee80211r 0 |
| |
| if [ "$ieee80211r" -gt "0" ]; then |
| json_get_vars mobility_domain ft_psk_generate_local ft_over_ds reassociation_deadline |
| |
| set_default mobility_domain "$(echo "$ssid" | md5sum | head -c 4)" |
| set_default ft_over_ds 0 |
| set_default reassociation_deadline 1000 |
| |
| case "$auth_type" in |
| psk|sae|psk-sae) |
| set_default ft_psk_generate_local 1 |
| ;; |
| *) |
| set_default ft_psk_generate_local 0 |
| ;; |
| esac |
| |
| [ -n "$network_ifname" ] && append bss_conf "ft_iface=$network_ifname" "$N" |
| append bss_conf "mobility_domain=$mobility_domain" "$N" |
| append bss_conf "ft_psk_generate_local=$ft_psk_generate_local" "$N" |
| append bss_conf "ft_over_ds=$ft_over_ds" "$N" |
| append bss_conf "reassociation_deadline=$reassociation_deadline" "$N" |
| |
| if [ "$ft_psk_generate_local" -eq "0" ]; then |
| json_get_vars r0_key_lifetime r1_key_holder pmk_r1_push |
| json_get_values r0kh r0kh |
| json_get_values r1kh r1kh |
| |
| set_default r0_key_lifetime 10000 |
| set_default pmk_r1_push 0 |
| |
| [ -n "$r0kh" -a -n "$r1kh" ] || { |
| ft_key=`echo -n "$mobility_domain/${auth_secret:-${key}}" | md5sum | awk '{print $1}'` |
| |
| set_default r0kh "ff:ff:ff:ff:ff:ff,*,$ft_key" |
| set_default r1kh "00:00:00:00:00:00,00:00:00:00:00:00,$ft_key" |
| } |
| |
| [ -n "$r1_key_holder" ] && append bss_conf "r1_key_holder=$r1_key_holder" "$N" |
| append bss_conf "r0_key_lifetime=$r0_key_lifetime" "$N" |
| append bss_conf "pmk_r1_push=$pmk_r1_push" "$N" |
| |
| for kh in $r0kh; do |
| append bss_conf "r0kh=${kh//,/ }" "$N" |
| done |
| for kh in $r1kh; do |
| append bss_conf "r1kh=${kh//,/ }" "$N" |
| done |
| fi |
| fi |
| if [ "$fils" -gt 0 ]; then |
| json_get_vars fils_realm |
| set_default fils_realm "$(echo "$ssid" | md5sum | head -c 8)" |
| fi |
| |
| append bss_conf "wpa_disable_eapol_key_retries=$wpa_disable_eapol_key_retries" "$N" |
| |
| hostapd_append_wpa_key_mgmt |
| [ -n "$wpa_key_mgmt" ] && append bss_conf "wpa_key_mgmt=$wpa_key_mgmt" "$N" |
| fi |
| |
| if [ "$wpa" -ge "2" ]; then |
| if [ -n "$network_bridge" -a "$rsn_preauth" = 1 ]; then |
| set_default auth_cache 1 |
| append bss_conf "rsn_preauth=1" "$N" |
| append bss_conf "rsn_preauth_interfaces=$network_bridge" "$N" |
| else |
| case "$auth_type" in |
| sae|psk-sae|owe) |
| set_default auth_cache 1 |
| ;; |
| *) |
| set_default auth_cache 0 |
| ;; |
| esac |
| fi |
| |
| append bss_conf "okc=$auth_cache" "$N" |
| [ "$auth_cache" = 0 -a "$fils" = 0 ] && append bss_conf "disable_pmksa_caching=1" "$N" |
| |
| # RSN -> allow management frame protection |
| case "$ieee80211w" in |
| [012]) |
| json_get_vars ieee80211w_mgmt_cipher ieee80211w_max_timeout ieee80211w_retry_timeout |
| append bss_conf "ieee80211w=$ieee80211w" "$N" |
| [ "$ieee80211w" -gt "0" ] && { |
| if [ "$auth_type" = "eap192" ]; then |
| append bss_conf "group_mgmt_cipher=BIP-GMAC-256" "$N" |
| else |
| append bss_conf "group_mgmt_cipher=${ieee80211w_mgmt_cipher:-AES-128-CMAC}" "$N" |
| fi |
| [ -n "$ieee80211w_max_timeout" ] && \ |
| append bss_conf "assoc_sa_query_max_timeout=$ieee80211w_max_timeout" "$N" |
| [ -n "$ieee80211w_retry_timeout" ] && \ |
| append bss_conf "assoc_sa_query_retry_timeout=$ieee80211w_retry_timeout" "$N" |
| } |
| ;; |
| esac |
| fi |
| |
| _macfile="/var/run/hostapd-$ifname.maclist" |
| case "$macfilter" in |
| allow) |
| append bss_conf "macaddr_acl=1" "$N" |
| append bss_conf "accept_mac_file=$_macfile" "$N" |
| # accept_mac_file can be used to set MAC to VLAN ID mapping |
| vlan_possible=1 |
| ;; |
| deny) |
| append bss_conf "macaddr_acl=0" "$N" |
| append bss_conf "deny_mac_file=$_macfile" "$N" |
| ;; |
| *) |
| _macfile="" |
| ;; |
| esac |
| |
| [ -n "$_macfile" ] && { |
| json_get_vars macfile |
| json_get_values maclist maclist |
| |
| rm -f "$_macfile" |
| ( |
| for mac in $maclist; do |
| echo "$mac" |
| done |
| [ -n "$macfile" -a -f "$macfile" ] && cat "$macfile" |
| ) > "$_macfile" |
| } |
| |
| [ -n "$vlan_possible" -a -n "$dynamic_vlan" ] && { |
| json_get_vars vlan_naming vlan_tagged_interface vlan_bridge vlan_file vlan_no_bridge |
| set_default vlan_naming 1 |
| [ -z "$vlan_file" ] && set_default vlan_file /var/run/hostapd-$ifname.vlan |
| append bss_conf "dynamic_vlan=$dynamic_vlan" "$N" |
| append bss_conf "vlan_naming=$vlan_naming" "$N" |
| if [ -n "$vlan_bridge" ]; then |
| append bss_conf "vlan_bridge=$vlan_bridge" "$N" |
| else |
| set_default vlan_no_bridge 1 |
| fi |
| append bss_conf "vlan_no_bridge=$vlan_no_bridge" "$N" |
| [ -n "$vlan_tagged_interface" ] && \ |
| append bss_conf "vlan_tagged_interface=$vlan_tagged_interface" "$N" |
| [ -n "$vlan_file" ] && { |
| [ -e "$vlan_file" ] || touch "$vlan_file" |
| append bss_conf "vlan_file=$vlan_file" "$N" |
| } |
| } |
| |
| json_get_vars iw_enabled iw_internet iw_asra iw_esr iw_uesa iw_access_network_type |
| json_get_vars iw_hessid iw_venue_group iw_venue_type iw_network_auth_type |
| json_get_vars iw_roaming_consortium iw_domain_name iw_anqp_3gpp_cell_net iw_nai_realm |
| json_get_vars iw_anqp_elem iw_qos_map_set iw_ipaddr_type_availability iw_gas_address3 |
| json_get_vars iw_venue_name iw_venue_url |
| |
| set_default iw_enabled 0 |
| if [ "$iw_enabled" = "1" ]; then |
| append bss_conf "interworking=1" "$N" |
| set_default iw_internet 1 |
| set_default iw_asra 0 |
| set_default iw_esr 0 |
| set_default iw_uesa 0 |
| |
| append bss_conf "internet=$iw_internet" "$N" |
| append bss_conf "asra=$iw_asra" "$N" |
| append bss_conf "esr=$iw_esr" "$N" |
| append bss_conf "uesa=$iw_uesa" "$N" |
| |
| [ -n "$iw_access_network_type" ] && \ |
| append bss_conf "access_network_type=$iw_access_network_type" "$N" |
| [ -n "$iw_hessid" ] && append bss_conf "hessid=$iw_hessid" "$N" |
| [ -n "$iw_venue_group" ] && \ |
| append bss_conf "venue_group=$iw_venue_group" "$N" |
| [ -n "$iw_venue_type" ] && append bss_conf "venue_type=$iw_venue_type" "$N" |
| [ -n "$iw_network_auth_type" ] && \ |
| append bss_conf "network_auth_type=$iw_network_auth_type" "$N" |
| [ -n "$iw_gas_address3" ] && append bss_conf "gas_address3=$iw_gas_address3" "$N" |
| |
| json_for_each_item append_iw_roaming_consortium iw_roaming_consortium |
| json_for_each_item append_iw_anqp_elem iw_anqp_elem |
| json_for_each_item append_iw_nai_realm iw_nai_realm |
| json_for_each_item append_iw_venue_name iw_venue_name |
| json_for_each_item append_iw_venue_url iw_venue_url |
| |
| iw_domain_name_conf= |
| json_for_each_item append_iw_domain_name iw_domain_name |
| [ -n "$iw_domain_name_conf" ] && \ |
| append bss_conf "domain_name=$iw_domain_name_conf" "$N" |
| |
| iw_anqp_3gpp_cell_net_conf= |
| json_for_each_item append_iw_anqp_3gpp_cell_net iw_anqp_3gpp_cell_net |
| [ -n "$iw_anqp_3gpp_cell_net_conf" ] && \ |
| append bss_conf "anqp_3gpp_cell_net=$iw_anqp_3gpp_cell_net_conf" "$N" |
| fi |
| |
| set_default iw_qos_map_set 0,0,2,16,1,1,255,255,18,22,24,38,40,40,44,46,48,56 |
| case "$iw_qos_map_set" in |
| *,*);; |
| *) iw_qos_map_set="";; |
| esac |
| [ -n "$iw_qos_map_set" ] && append bss_conf "qos_map_set=$iw_qos_map_set" "$N" |
| |
| local hs20 disable_dgaf osen anqp_domain_id hs20_deauth_req_timeout \ |
| osu_ssid hs20_wan_metrics hs20_operating_class hs20_t_c_filename hs20_t_c_timestamp \ |
| hs20_t_c_server_url |
| json_get_vars hs20 disable_dgaf osen anqp_domain_id hs20_deauth_req_timeout \ |
| osu_ssid hs20_wan_metrics hs20_operating_class hs20_t_c_filename hs20_t_c_timestamp \ |
| hs20_t_c_server_url |
| |
| set_default hs20 0 |
| set_default disable_dgaf $hs20 |
| set_default osen 0 |
| set_default anqp_domain_id 0 |
| set_default hs20_deauth_req_timeout 60 |
| if [ "$hs20" = "1" ]; then |
| append bss_conf "hs20=1" "$N" |
| append_hs20_icons |
| append bss_conf "disable_dgaf=$disable_dgaf" "$N" |
| append bss_conf "osen=$osen" "$N" |
| append bss_conf "anqp_domain_id=$anqp_domain_id" "$N" |
| append bss_conf "hs20_deauth_req_timeout=$hs20_deauth_req_timeout" "$N" |
| [ -n "$osu_ssid" ] && append bss_conf "osu_ssid=$osu_ssid" "$N" |
| [ -n "$hs20_wan_metrics" ] && append bss_conf "hs20_wan_metrics=$hs20_wan_metrics" "$N" |
| [ -n "$hs20_operating_class" ] && append bss_conf "hs20_operating_class=$hs20_operating_class" "$N" |
| [ -n "$hs20_t_c_filename" ] && append bss_conf "hs20_t_c_filename=$hs20_t_c_filename" "$N" |
| [ -n "$hs20_t_c_timestamp" ] && append bss_conf "hs20_t_c_timestamp=$hs20_t_c_timestamp" "$N" |
| [ -n "$hs20_t_c_server_url" ] && append bss_conf "hs20_t_c_server_url=$hs20_t_c_server_url" "$N" |
| json_for_each_item append_hs20_oper_friendly_name hs20_oper_friendly_name |
| json_for_each_item append_hs20_conn_capab hs20_conn_capab |
| json_for_each_item append_osu_provider osu_provider |
| json_for_each_item append_operator_icon operator_icon |
| fi |
| |
| if [ "$eap_server" = "1" ]; then |
| append bss_conf "eap_server=1" "$N" |
| append bss_conf "eap_server_erp=1" "$N" |
| [ -n "$eap_user_file" ] && append bss_conf "eap_user_file=$eap_user_file" "$N" |
| [ -n "$ca_cert" ] && append bss_conf "ca_cert=$ca_cert" "$N" |
| [ -n "$server_cert" ] && append bss_conf "server_cert=$server_cert" "$N" |
| [ -n "$private_key" ] && append bss_conf "private_key=$private_key" "$N" |
| [ -n "$private_key_passwd" ] && append bss_conf "private_key_passwd=$private_key_passwd" "$N" |
| [ -n "$server_id" ] && append bss_conf "server_id=$server_id" "$N" |
| fi |
| |
| set_default multicast_to_unicast_all 0 |
| if [ "$multicast_to_unicast_all" -gt 0 ]; then |
| append bss_conf "multicast_to_unicast=$multicast_to_unicast_all" "$N" |
| fi |
| set_default proxy_arp 0 |
| if [ "$proxy_arp" -gt 0 ]; then |
| append bss_conf "proxy_arp=$proxy_arp" "$N" |
| fi |
| |
| set_default per_sta_vif 0 |
| if [ "$per_sta_vif" -gt 0 ]; then |
| append bss_conf "per_sta_vif=$per_sta_vif" "$N" |
| fi |
| |
| json_get_values opts hostapd_bss_options |
| for val in $opts; do |
| append bss_conf "$val" "$N" |
| done |
| |
| bss_md5sum="$(echo $bss_conf | md5sum | cut -d" " -f1)" |
| append bss_conf "config_id=$bss_md5sum" "$N" |
| |
| append "$var" "$bss_conf" "$N" |
| return 0 |
| } |
| |
| hostapd_set_log_options() { |
| local var="$1" |
| |
| local log_level log_80211 log_8021x log_radius log_wpa log_driver log_iapp log_mlme |
| json_get_vars log_level log_80211 log_8021x log_radius log_wpa log_driver log_iapp log_mlme |
| |
| set_default log_level 2 |
| set_default log_80211 1 |
| set_default log_8021x 1 |
| set_default log_radius 1 |
| set_default log_wpa 1 |
| set_default log_driver 1 |
| set_default log_iapp 1 |
| set_default log_mlme 1 |
| |
| local log_mask="$(( \ |
| ($log_80211 << 0) | \ |
| ($log_8021x << 1) | \ |
| ($log_radius << 2) | \ |
| ($log_wpa << 3) | \ |
| ($log_driver << 4) | \ |
| ($log_iapp << 5) | \ |
| ($log_mlme << 6) \ |
| ))" |
| |
| append "$var" "logger_syslog=$log_mask" "$N" |
| append "$var" "logger_syslog_level=$log_level" "$N" |
| append "$var" "logger_stdout=$log_mask" "$N" |
| append "$var" "logger_stdout_level=$log_level" "$N" |
| |
| return 0 |
| } |
| |
| _wpa_supplicant_common() { |
| local ifname="$1" |
| |
| _rpath="/var/run/wpa_supplicant" |
| _config="${_rpath}-$ifname.conf" |
| } |
| |
| wpa_supplicant_teardown_interface() { |
| _wpa_supplicant_common "$1" |
| rm -rf "$_rpath/$1" "$_config" |
| } |
| |
| wpa_supplicant_prepare_interface() { |
| local ifname="$1" |
| _w_driver="$2" |
| |
| _wpa_supplicant_common "$1" |
| |
| json_get_vars mode wds multi_ap |
| |
| [ -n "$network_bridge" ] && { |
| fail= |
| case "$mode" in |
| adhoc) |
| fail=1 |
| ;; |
| sta) |
| [ "$wds" = 1 -o "$multi_ap" = 1 ] || fail=1 |
| ;; |
| esac |
| |
| [ -n "$fail" ] && { |
| wireless_setup_vif_failed BRIDGE_NOT_ALLOWED |
| return 1 |
| } |
| } |
| |
| local ap_scan= |
| |
| _w_mode="$mode" |
| |
| [ "$mode" = adhoc ] && { |
| ap_scan="ap_scan=2" |
| } |
| |
| local country_str= |
| [ -n "$country" ] && { |
| country_str="country=$country" |
| } |
| |
| multiap_flag_file="${_config}.is_multiap" |
| if [ "$multi_ap" = "1" ]; then |
| touch "$multiap_flag_file" |
| else |
| [ -e "$multiap_flag_file" ] && rm "$multiap_flag_file" |
| fi |
| wpa_supplicant_teardown_interface "$ifname" |
| cat > "$_config" <<EOF |
| ${scan_list:+freq_list=$scan_list} |
| $ap_scan |
| $country_str |
| EOF |
| return 0 |
| } |
| |
| wpa_supplicant_set_fixed_freq() { |
| local freq="$1" |
| local htmode="$2" |
| |
| append network_data "fixed_freq=1" "$N$T" |
| append network_data "frequency=$freq" "$N$T" |
| case "$htmode" in |
| NOHT) append network_data "disable_ht=1" "$N$T";; |
| HE20|HT20|VHT20) append network_data "disable_ht40=1" "$N$T";; |
| HT40*|VHT40|VHT80|VHT160|HE40|HE80|HE160) append network_data "ht40=1" "$N$T";; |
| esac |
| case "$htmode" in |
| VHT*) append network_data "vht=1" "$N$T";; |
| esac |
| case "$htmode" in |
| HE80|VHT80) append network_data "max_oper_chwidth=1" "$N$T";; |
| HE160|VHT160) append network_data "max_oper_chwidth=2" "$N$T";; |
| HE20|HE40|VHT20|VHT40) append network_data "max_oper_chwidth=0" "$N$T";; |
| *) append network_data "disable_vht=1" "$N$T";; |
| esac |
| } |
| |
| wpa_supplicant_add_network() { |
| local ifname="$1" |
| local freq="$2" |
| local htmode="$3" |
| local noscan="$4" |
| |
| _wpa_supplicant_common "$1" |
| wireless_vif_parse_encryption |
| |
| json_get_vars \ |
| ssid bssid key \ |
| basic_rate mcast_rate \ |
| ieee80211w ieee80211r fils ocv \ |
| multi_ap \ |
| default_disabled |
| |
| case "$auth_type" in |
| sae|owe|eap192|eap-eap192) |
| set_default ieee80211w 2 |
| ;; |
| psk-sae) |
| set_default ieee80211w 1 |
| ;; |
| esac |
| |
| set_default ieee80211r 0 |
| set_default multi_ap 0 |
| set_default default_disabled 0 |
| |
| local key_mgmt='NONE' |
| local network_data= |
| local T=" " |
| |
| local scan_ssid="scan_ssid=1" |
| local freq wpa_key_mgmt |
| |
| [ "$_w_mode" = "adhoc" ] && { |
| append network_data "mode=1" "$N$T" |
| [ -n "$freq" ] && wpa_supplicant_set_fixed_freq "$freq" "$htmode" |
| [ "$noscan" = "1" ] && append network_data "noscan=1" "$N$T" |
| |
| scan_ssid="scan_ssid=0" |
| |
| [ "$_w_driver" = "nl80211" ] || append wpa_key_mgmt "WPA-NONE" |
| } |
| |
| [ "$_w_mode" = "mesh" ] && { |
| json_get_vars mesh_id mesh_fwding mesh_rssi_threshold encryption |
| [ -n "$mesh_id" ] && ssid="${mesh_id}" |
| |
| append network_data "mode=5" "$N$T" |
| [ -n "$mesh_fwding" ] && append network_data "mesh_fwding=${mesh_fwding}" "$N$T" |
| [ -n "$mesh_rssi_threshold" ] && append network_data "mesh_rssi_threshold=${mesh_rssi_threshold}" "$N$T" |
| [ -n "$freq" ] && wpa_supplicant_set_fixed_freq "$freq" "$htmode" |
| [ "$noscan" = "1" ] && append network_data "noscan=1" "$N$T" |
| [ "$encryption" = "none" -o -z "$encryption" ] || append wpa_key_mgmt "SAE" |
| scan_ssid="" |
| } |
| |
| [ "$_w_mode" = "sta" ] && { |
| [ "$multi_ap" = 1 ] && append network_data "multi_ap_backhaul_sta=1" "$N$T" |
| [ "$default_disabled" = 1 ] && append network_data "disabled=1" "$N$T" |
| } |
| |
| [ -n "$ocv" ] && append network_data "ocv=$ocv" "$N$T" |
| |
| case "$auth_type" in |
| none) ;; |
| owe) |
| hostapd_append_wpa_key_mgmt |
| key_mgmt="$wpa_key_mgmt" |
| ;; |
| wep) |
| local wep_keyidx=0 |
| hostapd_append_wep_key network_data |
| append network_data "wep_tx_keyidx=$wep_keyidx" "$N$T" |
| ;; |
| wps) |
| key_mgmt='WPS' |
| ;; |
| psk|sae|psk-sae) |
| local passphrase |
| |
| if [ "$_w_mode" != "mesh" ]; then |
| hostapd_append_wpa_key_mgmt |
| fi |
| |
| key_mgmt="$wpa_key_mgmt" |
| |
| if [ "$_w_mode" = "mesh" ] || [ "$auth_type" = "sae" ]; then |
| passphrase="sae_password=\"${key}\"" |
| else |
| if [ ${#key} -eq 64 ]; then |
| passphrase="psk=${key}" |
| else |
| passphrase="psk=\"${key}\"" |
| fi |
| fi |
| append network_data "$passphrase" "$N$T" |
| ;; |
| eap|eap192|eap-eap192) |
| hostapd_append_wpa_key_mgmt |
| key_mgmt="$wpa_key_mgmt" |
| |
| json_get_vars eap_type identity anonymous_identity ca_cert ca_cert_usesystem |
| |
| [ "$fils" -gt 0 ] && append network_data "erp=1" "$N$T" |
| if [ "$ca_cert_usesystem" -eq "1" -a -f "/etc/ssl/certs/ca-certificates.crt" ]; then |
| append network_data "ca_cert=\"/etc/ssl/certs/ca-certificates.crt\"" "$N$T" |
| else |
| [ -n "$ca_cert" ] && append network_data "ca_cert=\"$ca_cert\"" "$N$T" |
| fi |
| [ -n "$identity" ] && append network_data "identity=\"$identity\"" "$N$T" |
| [ -n "$anonymous_identity" ] && append network_data "anonymous_identity=\"$anonymous_identity\"" "$N$T" |
| case "$eap_type" in |
| tls) |
| json_get_vars client_cert priv_key priv_key_pwd |
| append network_data "client_cert=\"$client_cert\"" "$N$T" |
| append network_data "private_key=\"$priv_key\"" "$N$T" |
| append network_data "private_key_passwd=\"$priv_key_pwd\"" "$N$T" |
| |
| json_get_vars subject_match |
| [ -n "$subject_match" ] && append network_data "subject_match=\"$subject_match\"" "$N$T" |
| |
| json_get_values altsubject_match altsubject_match |
| if [ -n "$altsubject_match" ]; then |
| local list= |
| for x in $altsubject_match; do |
| append list "$x" ";" |
| done |
| append network_data "altsubject_match=\"$list\"" "$N$T" |
| fi |
| |
| json_get_values domain_match domain_match |
| if [ -n "$domain_match" ]; then |
| local list= |
| for x in $domain_match; do |
| append list "$x" ";" |
| done |
| append network_data "domain_match=\"$list\"" "$N$T" |
| fi |
| |
| json_get_values domain_suffix_match domain_suffix_match |
| if [ -n "$domain_suffix_match" ]; then |
| local list= |
| for x in $domain_suffix_match; do |
| append list "$x" ";" |
| done |
| append network_data "domain_suffix_match=\"$list\"" "$N$T" |
| fi |
| ;; |
| fast|peap|ttls) |
| json_get_vars auth password ca_cert2 ca_cert2_usesystem client_cert2 priv_key2 priv_key2_pwd |
| set_default auth MSCHAPV2 |
| |
| if [ "$auth" = "EAP-TLS" ]; then |
| if [ "$ca_cert2_usesystem" -eq "1" -a -f "/etc/ssl/certs/ca-certificates.crt" ]; then |
| append network_data "ca_cert2=\"/etc/ssl/certs/ca-certificates.crt\"" "$N$T" |
| else |
| [ -n "$ca_cert2" ] && append network_data "ca_cert2=\"$ca_cert2\"" "$N$T" |
| fi |
| append network_data "client_cert2=\"$client_cert2\"" "$N$T" |
| append network_data "private_key2=\"$priv_key2\"" "$N$T" |
| append network_data "private_key2_passwd=\"$priv_key2_pwd\"" "$N$T" |
| else |
| append network_data "password=\"$password\"" "$N$T" |
| fi |
| |
| json_get_vars subject_match |
| [ -n "$subject_match" ] && append network_data "subject_match=\"$subject_match\"" "$N$T" |
| |
| json_get_values altsubject_match altsubject_match |
| if [ -n "$altsubject_match" ]; then |
| local list= |
| for x in $altsubject_match; do |
| append list "$x" ";" |
| done |
| append network_data "altsubject_match=\"$list\"" "$N$T" |
| fi |
| |
| json_get_values domain_match domain_match |
| if [ -n "$domain_match" ]; then |
| local list= |
| for x in $domain_match; do |
| append list "$x" ";" |
| done |
| append network_data "domain_match=\"$list\"" "$N$T" |
| fi |
| |
| json_get_values domain_suffix_match domain_suffix_match |
| if [ -n "$domain_suffix_match" ]; then |
| local list= |
| for x in $domain_suffix_match; do |
| append list "$x" ";" |
| done |
| append network_data "domain_suffix_match=\"$list\"" "$N$T" |
| fi |
| |
| phase2proto="auth=" |
| case "$auth" in |
| "auth"*) |
| phase2proto="" |
| ;; |
| "EAP-"*) |
| auth="$(echo $auth | cut -b 5- )" |
| [ "$eap_type" = "ttls" ] && |
| phase2proto="autheap=" |
| json_get_vars subject_match2 |
| [ -n "$subject_match2" ] && append network_data "subject_match2=\"$subject_match2\"" "$N$T" |
| |
| json_get_values altsubject_match2 altsubject_match2 |
| if [ -n "$altsubject_match2" ]; then |
| local list= |
| for x in $altsubject_match2; do |
| append list "$x" ";" |
| done |
| append network_data "altsubject_match2=\"$list\"" "$N$T" |
| fi |
| |
| json_get_values domain_match2 domain_match2 |
| if [ -n "$domain_match2" ]; then |
| local list= |
| for x in $domain_match2; do |
| append list "$x" ";" |
| done |
| append network_data "domain_match2=\"$list\"" "$N$T" |
| fi |
| |
| json_get_values domain_suffix_match2 domain_suffix_match2 |
| if [ -n "$domain_suffix_match2" ]; then |
| local list= |
| for x in $domain_suffix_match2; do |
| append list "$x" ";" |
| done |
| append network_data "domain_suffix_match2=\"$list\"" "$N$T" |
| fi |
| ;; |
| esac |
| append network_data "phase2=\"$phase2proto$auth\"" "$N$T" |
| ;; |
| esac |
| append network_data "eap=$(echo $eap_type | tr 'a-z' 'A-Z')" "$N$T" |
| ;; |
| esac |
| |
| [ "$wpa_cipher" = GCMP ] && { |
| append network_data "pairwise=GCMP" "$N$T" |
| append network_data "group=GCMP" "$N$T" |
| } |
| |
| [ "$mode" = mesh ] || { |
| case "$wpa" in |
| 1) |
| append network_data "proto=WPA" "$N$T" |
| ;; |
| 2) |
| append network_data "proto=RSN" "$N$T" |
| ;; |
| esac |
| |
| case "$ieee80211w" in |
| [012]) |
| [ "$wpa" -ge 2 ] && append network_data "ieee80211w=$ieee80211w" "$N$T" |
| ;; |
| esac |
| } |
| [ -n "$bssid" ] && append network_data "bssid=$bssid" "$N$T" |
| [ -n "$beacon_int" ] && append network_data "beacon_int=$beacon_int" "$N$T" |
| |
| local bssid_blacklist bssid_whitelist |
| json_get_values bssid_blacklist bssid_blacklist |
| json_get_values bssid_whitelist bssid_whitelist |
| |
| [ -n "$bssid_blacklist" ] && append network_data "bssid_blacklist=$bssid_blacklist" "$N$T" |
| [ -n "$bssid_whitelist" ] && append network_data "bssid_whitelist=$bssid_whitelist" "$N$T" |
| |
| [ -n "$basic_rate" ] && { |
| local br rate_list= |
| for br in $basic_rate; do |
| wpa_supplicant_add_rate rate_list "$br" |
| done |
| [ -n "$rate_list" ] && append network_data "rates=$rate_list" "$N$T" |
| } |
| |
| [ -n "$mcast_rate" ] && { |
| local mc_rate= |
| wpa_supplicant_add_rate mc_rate "$mcast_rate" |
| append network_data "mcast_rate=$mc_rate" "$N$T" |
| } |
| |
| if [ "$key_mgmt" = "WPS" ]; then |
| echo "wps_cred_processing=1" >> "$_config" |
| else |
| cat >> "$_config" <<EOF |
| network={ |
| $scan_ssid |
| ssid="$ssid" |
| key_mgmt=$key_mgmt |
| $network_data |
| } |
| EOF |
| fi |
| return 0 |
| } |
| |
| wpa_supplicant_run() { |
| local ifname="$1" |
| local hostapd_ctrl="$2" |
| |
| _wpa_supplicant_common "$ifname" |
| |
| ubus wait_for wpa_supplicant |
| local supplicant_res="$(ubus call wpa_supplicant config_add "{ \ |
| \"driver\": \"${_w_driver:-wext}\", \"ctrl\": \"$_rpath\", \ |
| \"iface\": \"$ifname\", \"config\": \"$_config\" \ |
| ${network_bridge:+, \"bridge\": \"$network_bridge\"} \ |
| ${hostapd_ctrl:+, \"hostapd_ctrl\": \"$hostapd_ctrl\"} \ |
| }")" |
| |
| ret="$?" |
| |
| [ "$ret" != 0 -o -z "$supplicant_res" ] && wireless_setup_vif_failed WPA_SUPPLICANT_FAILED |
| |
| wireless_add_process "$(jsonfilter -s "$supplicant_res" -l 1 -e @.pid)" "/usr/sbin/wpa_supplicant" 1 1 |
| |
| return $ret |
| } |
| |
| hostapd_common_cleanup() { |
| killall meshd-nl80211 |
| } |