| # If not stated otherwise in this file or this component's LICENSE |
| # file the following copyright and licenses apply: |
| # |
| #Copyright [2019] [RDK Management] |
| # |
| #Licensed under the Apache License, Version 2.0 (the "License"); |
| #you may not use this file except in compliance with the License. |
| #You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| #Unless required by applicable law or agreed to in writing, software |
| #distributed under the License is distributed on an "AS IS" BASIS, |
| #WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| #See the License for the specific language governing permissions and |
| #limitations under the License. |
| |
| #!/bin/sh |
| |
| device_type=`cat /version.txt | grep imagename | cut -d':' -f2 | cut -d'-' -f3` |
| echo "device_type: $device_type" |
| if [ $device_type == "extender" ]; |
| then |
| #Workaround: allowing devices initialization |
| sleep 5; |
| fi |
| |
| nvram_mounted=`mount | grep nvram -wc` |
| if [ $nvram_mounted == 0 ]; then |
| mkdir -p /nvram |
| if [ -b /dev/mmcblk0p6 ]; then |
| #for Older Turris Omnia |
| mount /dev/mmcblk0p6 /nvram |
| else |
| #for Omnia2019 and Omnia2020 |
| mount /dev/mmcblk0p5 /nvram |
| fi |
| fi |
| |
| WIFI0_MAC=`cat /sys/class/net/wlan0/address` |
| WIFI1_MAC=`cat /sys/class/net/wlan1/address` |
| echo "2.4GHz Radio MAC: $WIFI0_MAC" |
| echo "5GHz Radio MAC: $WIFI1_MAC" |
| |
| if [ ! -f /nvram/hostapd0.conf ] |
| then |
| cp /etc/hostapd-2G.conf /nvram/hostapd0.conf |
| #Set bssid for wifi0 |
| NEW_MAC=$(echo 0x$WIFI0_MAC| awk -F: '{printf "%02x:%s:%s:%s:%s:%s", strtonum($1)+2, $2, $3, $4 ,$5, $6}') |
| sed -i "/^bssid=/c\bssid=$NEW_MAC" /nvram/hostapd0.conf |
| echo "wpa_psk_file=/tmp/hostapd0.psk" >> /nvram/hostapd0.conf |
| fi |
| |
| if [ ! -f /nvram/hostapd1.conf ] |
| then |
| cp /etc/hostapd-5G.conf /nvram/hostapd1.conf |
| #Set bssid for wifi1 |
| NEW_MAC=$(echo 0x$WIFI1_MAC| awk -F: '{printf "%02x:%s:%s:%s:%s:%s", strtonum($1)+2, $2, $3, $4 ,$5, $6}') |
| sed -i "/^bssid=/c\bssid=$NEW_MAC" /nvram/hostapd1.conf |
| echo "wpa_psk_file=/tmp/hostapd1.psk" >> /nvram/hostapd1.conf |
| fi |
| |
| if [ ! -f /nvram/hostapd2.conf ] |
| then |
| cp /etc/hostapd-bhaul2G.conf /nvram/hostapd2.conf |
| #Set bssid for wifi2 |
| NEW_MAC=$(echo 0x$WIFI0_MAC| awk -F: '{printf "%02x:%s:%s:%s:%s:%s", strtonum($1)+4, $2, $3, $4 ,$5, $6}') |
| sed -i "/^bssid=/c\bssid=$NEW_MAC" /nvram/hostapd2.conf |
| echo "wpa_psk_file=/tmp/hostapd2.psk" >> /nvram/hostapd2.conf |
| fi |
| |
| if [ ! -f /nvram/hostapd3.conf ] |
| then |
| cp /etc/hostapd-bhaul5G.conf /nvram/hostapd3.conf |
| #Set bssid for wifi3 |
| NEW_MAC=$(echo 0x$WIFI1_MAC| awk -F: '{printf "%02x:%s:%s:%s:%s:%s", strtonum($1)+4, $2, $3, $4 ,$5, $6}') |
| sed -i "/^bssid=/c\bssid=$NEW_MAC" /nvram/hostapd3.conf |
| echo "wpa_psk_file=/tmp/hostapd3.psk" >> /nvram/hostapd3.conf |
| fi |
| |
| if [ ! -f /nvram/hostapd4.conf ] |
| then |
| cp /etc/hostapd-bhaul2G.conf /nvram/hostapd4.conf |
| #Set bssid for wifi4 |
| NEW_MAC=$(echo 0x$WIFI0_MAC| awk -F: '{printf "%02x:%s:%s:%s:%s:%s", strtonum($1)+6, $2, $3, $4 ,$5, $6}') |
| sed -i "/^bssid=/c\bssid=$NEW_MAC" /nvram/hostapd4.conf |
| sed -i "/^interface=/c\interface=wifi4" /nvram/hostapd4.conf |
| sed -i "/^accept_mac/c\accept_mac_file=/tmp/hostapd-acl4" /nvram/hostapd4.conf |
| echo "wpa_psk_file=/tmp/hostapd4.psk" >> /nvram/hostapd4.conf |
| fi |
| |
| if [ ! -f /nvram/hostapd5.conf ] |
| then |
| cp /etc/hostapd-bhaul5G.conf /nvram/hostapd5.conf |
| #Set bssid for wifi5 |
| NEW_MAC=$(echo 0x$WIFI1_MAC| awk -F: '{printf "%02x:%s:%s:%s:%s:%s", strtonum($1)+6, $2, $3, $4 ,$5, $6}') |
| sed -i "/^bssid=/c\bssid=$NEW_MAC" /nvram/hostapd5.conf |
| sed -i "/^interface=/c\interface=wifi5" /nvram/hostapd5.conf |
| sed -i "/^accept_mac/c\accept_mac_file=/tmp/hostapd-acl5" /nvram/hostapd5.conf |
| echo "wpa_psk_file=/tmp/hostapd5.psk" >> /nvram/hostapd5.conf |
| fi |
| |
| if [ ! -f /nvram/hostapd6.conf ] |
| then |
| cp /etc/hostapd-bhaul2G.conf /nvram/hostapd6.conf |
| #Set bssid for wifi6 |
| NEW_MAC=$(echo 0x$WIFI1_MAC| awk -F: '{printf "%02x:%s:%s:%s:%s:%s", strtonum($1)+8, $2, $3, $4 ,$5, $6}') |
| sed -i "/^bssid=/c\bssid=$NEW_MAC" /nvram/hostapd6.conf |
| sed -i "/^interface=/c\interface=wifi6" /nvram/hostapd6.conf |
| sed -i "/^accept_mac/c\accept_mac_file=/tmp/hostapd-acl6" /nvram/hostapd6.conf |
| echo "wpa_psk_file=/tmp/hostapd6.psk" >> /nvram/hostapd6.conf |
| fi |
| |
| if [ ! -f /nvram/hostapd7.conf ] |
| then |
| cp /etc/hostapd-bhaul5G.conf /nvram/hostapd7.conf |
| #Set bssid for wifi7 |
| NEW_MAC=$(echo 0x$WIFI1_MAC| awk -F: '{printf "%02x:%s:%s:%s:%s:%s", strtonum($1)+8, $2, $3, $4 ,$5, $6}') |
| sed -i "/^bssid=/c\bssid=$NEW_MAC" /nvram/hostapd7.conf |
| sed -i "/^interface=/c\interface=wifi7" /nvram/hostapd7.conf |
| sed -i "/^accept_mac/c\accept_mac_file=/tmp/hostapd-acl7" /nvram/hostapd7.conf |
| echo "wpa_psk_file=/tmp/hostapd7.psk" >> /nvram/hostapd7.conf |
| fi |
| |
| #Setting up VAP status file |
| echo -e "wifi0=1\nwifi1=1\nwifi2=0\nwifi3=0\nwifi4=0\nwifi5=0\nwifi6=0\nwifi7=0" >/tmp/vap-status |
| |
| #Creating files for tracking AssociatedDevices |
| touch /tmp/AllAssociated_Devices_2G.txt |
| touch /tmp/AllAssociated_Devices_5G.txt |
| |
| if [ $device_type == "extender" ]; |
| then |
| ifconfig wlan0 down |
| ifconfig wlan1 down |
| exit 0; |
| fi |
| |
| #Creating virtual interfaces wifi0 and wifi1 for Home APs |
| iw dev wlan0 interface add wifi0 type __ap |
| iw dev wlan1 interface add wifi1 type __ap |
| |
| #2.4GHz Virtual Access Points for backhaul connection |
| iw dev wlan0 interface add wifi2 type __ap |
| ip addr add 169.254.0.1/25 dev wifi2 |
| ifconfig wifi2 mtu 1600 |
| |
| #5GHz Virtual Access Points for backhaul connection |
| iw dev wlan1 interface add wifi3 type __ap |
| ip addr add 169.254.1.1/25 dev wifi3 |
| ifconfig wifi3 mtu 1600 |
| |
| #Creating virtual interfaces wifi4 and wifi5 for Guest APs |
| iw dev wlan0 interface add wifi4 type __ap |
| iw dev wlan1 interface add wifi5 type __ap |
| |
| #2.4GHz Virtual Access Points for Secure Onboard connection |
| iw dev wlan0 interface add wifi6 type __ap |
| ip addr add 169.254.0.129/25 dev wifi6 |
| ifconfig wifi6 mtu 1600 |
| |
| #5GHz Virtual Access Points for onboard connection |
| iw dev wlan1 interface add wifi7 type __ap |
| ip addr add 169.254.1.129/25 dev wifi7 |
| ifconfig wifi7 mtu 1600 |
| |
| #Creating virtual interfaces wifi8 and wifi9 for Service APs |
| iw dev wlan0 interface add wifi8 type __ap |
| iw dev wlan1 interface add wifi9 type __ap |
| |
| #Create empty acl list for hostapd |
| touch /tmp/hostapd-acl0 |
| touch /tmp/hostapd-acl1 |
| touch /tmp/hostapd-acl2 |
| touch /tmp/hostapd-acl3 |
| touch /tmp/hostapd-acl4 |
| touch /tmp/hostapd-acl5 |
| touch /tmp/hostapd-acl6 |
| touch /tmp/hostapd-acl7 |
| touch /tmp/hostapd-acl8 |
| touch /tmp/hostapd-acl9 |
| |
| #create empty psk files |
| touch /tmp/hostapd0.psk |
| touch /tmp/hostapd1.psk |
| touch /tmp/hostapd2.psk |
| touch /tmp/hostapd3.psk |
| touch /tmp/hostapd6.psk |
| touch /tmp/hostapd7.psk |
| touch /tmp/hostapd8.psk |
| touch /tmp/hostapd9.psk |
| |
| #Create wps pin request log file |
| touch /var/run/hostapd_wps_pin_requests.log |
| |
| #Setting brlan0 bridge |
| if [ ! -d /sys/class/net/brlan0 ] |
| then |
| brctl addbr brlan0 |
| ip link set brlan0 address `cat /sys/class/net/eth1/address` |
| ifconfig brlan0 10.0.0.1 netmask 255.255.255.0 up |
| fi |
| |
| #Work around for Ethernet connected clients |
| if [ ! -d /sys/class/net/lan0 ] |
| then |
| brctl addif brlan0 eth1 |
| else |
| brctl addif brlan0 lan0 |
| brctl addif brlan0 lan1 |
| brctl addif brlan0 lan2 |
| brctl addif brlan0 lan3 |
| brctl addif brlan0 lan4 |
| |
| ifconfig lan0 up |
| ifconfig lan1 up |
| ifconfig lan2 up |
| ifconfig lan3 up |
| ifconfig lan4 up |
| fi |
| ifconfig eth1 up |
| |
| |
| #workaround: creating /opt/secure folder for ssh service |
| mkdir /opt/secure |
| |
| exit 0 |
| |