recipes-wifi/iw/patches/001-nl80211_h_sync.patch

--- a/nl80211.h
+++ b/nl80211.h
@@ -11,7 +11,7 @@
  * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
  * Copyright 2008 Colin McCabe <colin@cozybit.com>
  * Copyright 2015-2017	Intel Deutschland GmbH
- * Copyright (C) 2018-2022 Intel Corporation
+ * Copyright (C) 2018-2021 Intel Corporation
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -301,29 +301,6 @@
  */
 
 /**
- * DOC: FILS shared key crypto offload
- *
- * This feature is applicable to drivers running in AP mode.
- *
- * FILS shared key crypto offload can be advertised by drivers by setting
- * @NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD flag. The drivers that support
- * FILS shared key crypto offload should be able to encrypt and decrypt
- * association frames for FILS shared key authentication as per IEEE 802.11ai.
- * With this capability, for FILS key derivation, drivers depend on userspace.
- *
- * After FILS key derivation, userspace shares the FILS AAD details with the
- * driver and the driver stores the same to use in decryption of association
- * request and in encryption of association response. The below parameters
- * should be given to the driver in %NL80211_CMD_SET_FILS_AAD.
- *	%NL80211_ATTR_MAC - STA MAC address, used for storing FILS AAD per STA
- *	%NL80211_ATTR_FILS_KEK - Used for encryption or decryption
- *	%NL80211_ATTR_FILS_NONCES - Used for encryption or decryption
- *			(STA Nonce 16 bytes followed by AP Nonce 16 bytes)
- *
- * Once the association is done, the driver cleans the FILS AAD data.
- */
-
-/**
  * enum nl80211_commands - supported nl80211 commands
  *
  * @NL80211_CMD_UNSPEC: unspecified command to catch errors
@@ -1226,17 +1203,6 @@
  * @NL80211_CMD_COLOR_CHANGE_COMPLETED: Notify userland that the color change
  *	has completed
  *
- * @NL80211_CMD_SET_FILS_AAD: Set FILS AAD data to the driver using -
- *	&NL80211_ATTR_MAC - for STA MAC address
- *	&NL80211_ATTR_FILS_KEK - for KEK
- *	&NL80211_ATTR_FILS_NONCES - for FILS Nonces
- *		(STA Nonce 16 bytes followed by AP Nonce 16 bytes)
- *
- * @NL80211_CMD_ASSOC_COMEBACK: notification about an association
- *      temporal rejection with comeback. The event includes %NL80211_ATTR_MAC
- *      to describe the BSSID address of the AP and %NL80211_ATTR_TIMEOUT to
- *      specify the timeout value.
- *
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -1477,10 +1443,6 @@ enum nl80211_commands {
 	NL80211_CMD_COLOR_CHANGE_ABORTED,
 	NL80211_CMD_COLOR_CHANGE_COMPLETED,
 
-	NL80211_CMD_SET_FILS_AAD,
-
-	NL80211_CMD_ASSOC_COMEBACK,
-
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -2477,9 +2439,7 @@ enum nl80211_commands {
  *	space supports external authentication. This attribute shall be used
  *	with %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP request. The driver
  *	may offload authentication processing to user space if this capability
- *	is indicated in the respective requests from the user space. (This flag
- *	attribute deprecated for %NL80211_CMD_START_AP, use
- *	%NL80211_ATTR_AP_SETTINGS_FLAGS)
+ *	is indicated in the respective requests from the user space.
  *
  * @NL80211_ATTR_NSS: Station's New/updated  RX_NSS value notified using this
  *	u8 attribute. This is used with %NL80211_CMD_STA_OPMODE_CHANGED.
@@ -2655,13 +2615,8 @@ enum nl80211_commands {
  *	switching on a different channel during CAC detection on the selected
  *	radar channel.
  *
- * @NL80211_ATTR_AP_SETTINGS_FLAGS: u32 attribute contains ap settings flags,
- *	enumerated in &enum nl80211_ap_settings_flags. This attribute shall be
- *	used with %NL80211_CMD_START_AP request.
- *
- * @NL80211_ATTR_EHT_CAPABILITY: EHT Capability information element (from
- *	association request when used with NL80211_CMD_NEW_STATION). Can be set
- *	only if %NL80211_STA_FLAG_WME is set.
+ * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce
+ *	transmit power to stay within regulatory limits. u32, dBi.
  *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
@@ -3171,11 +3126,7 @@ enum nl80211_attrs {
 
 	NL80211_ATTR_RADAR_BACKGROUND,
 
-	NL80211_ATTR_AP_SETTINGS_FLAGS,
-
-	NL80211_ATTR_EHT_CAPABILITY,
-
-	NL80211_ATTR_DISABLE_EHT,
+	NL80211_ATTR_WIPHY_ANTENNA_GAIN,
 
 	/* add attributes here, update the policy in nl80211.c */
 
@@ -3232,8 +3183,6 @@ enum nl80211_attrs {
 #define NL80211_HE_MAX_CAPABILITY_LEN           54
 #define NL80211_MAX_NR_CIPHER_SUITES		5
 #define NL80211_MAX_NR_AKM_SUITES		2
-#define NL80211_EHT_MIN_CAPABILITY_LEN          13
-#define NL80211_EHT_MAX_CAPABILITY_LEN          51
 
 #define NL80211_MIN_REMAIN_ON_CHANNEL_TIME	10
 
@@ -3261,7 +3210,7 @@ enum nl80211_attrs {
  *	and therefore can't be created in the normal ways, use the
  *	%NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE
  *	commands to create and destroy one
- * @NL80211_IFTYPE_OCB: Outside Context of a BSS
+ * @NL80211_IF_TYPE_OCB: Outside Context of a BSS
  *	This mode corresponds to the MIB variable dot11OCBActivated=true
  * @NL80211_IFTYPE_NAN: NAN device interface type (not a netdev)
  * @NL80211_IFTYPE_MAX: highest interface type number currently defined
@@ -3403,56 +3352,6 @@ enum nl80211_he_ru_alloc {
 };
 
 /**
- * enum nl80211_eht_gi - EHT guard interval
- * @NL80211_RATE_INFO_EHT_GI_0_8: 0.8 usec
- * @NL80211_RATE_INFO_EHT_GI_1_6: 1.6 usec
- * @NL80211_RATE_INFO_EHT_GI_3_2: 3.2 usec
- */
-enum nl80211_eht_gi {
-	NL80211_RATE_INFO_EHT_GI_0_8,
-	NL80211_RATE_INFO_EHT_GI_1_6,
-	NL80211_RATE_INFO_EHT_GI_3_2,
-};
-
-/**
- * enum nl80211_eht_ru_alloc - EHT RU allocation values
- * @NL80211_RATE_INFO_EHT_RU_ALLOC_26: 26-tone RU allocation
- * @NL80211_RATE_INFO_EHT_RU_ALLOC_52: 52-tone RU allocation
- * @NL80211_RATE_INFO_EHT_RU_ALLOC_52P26: 52+26-tone RU allocation
- * @NL80211_RATE_INFO_EHT_RU_ALLOC_106: 106-tone RU allocation
- * @NL80211_RATE_INFO_EHT_RU_ALLOC_106P26: 106+26 tone RU allocation
- * @NL80211_RATE_INFO_EHT_RU_ALLOC_242: 242-tone RU allocation
- * @NL80211_RATE_INFO_EHT_RU_ALLOC_484: 484-tone RU allocation
- * @NL80211_RATE_INFO_EHT_RU_ALLOC_484P242: 484+242 tone RU allocation
- * @NL80211_RATE_INFO_EHT_RU_ALLOC_996: 996-tone RU allocation
- * @NL80211_RATE_INFO_EHT_RU_ALLOC_996P484: 996+484 tone RU allocation
- * @NL80211_RATE_INFO_EHT_RU_ALLOC_996P484P242: 996+484+242 tone RU allocation
- * @NL80211_RATE_INFO_EHT_RU_ALLOC_2x996: 2x996-tone RU allocation
- * @NL80211_RATE_INFO_EHT_RU_ALLOC_2x996P484: 2x996+484 tone RU allocation
- * @NL80211_RATE_INFO_EHT_RU_ALLOC_3x996: 3x996-tone RU allocation
- * @NL80211_RATE_INFO_EHT_RU_ALLOC_3x996P484: 3x996+484 tone RU allocation
- * @NL80211_RATE_INFO_EHT_RU_ALLOC_4x996: 4x996-tone RU allocation
- */
-enum nl80211_eht_ru_alloc {
-	NL80211_RATE_INFO_EHT_RU_ALLOC_26,
-	NL80211_RATE_INFO_EHT_RU_ALLOC_52,
-	NL80211_RATE_INFO_EHT_RU_ALLOC_52P26,
-	NL80211_RATE_INFO_EHT_RU_ALLOC_106,
-	NL80211_RATE_INFO_EHT_RU_ALLOC_106P26,
-	NL80211_RATE_INFO_EHT_RU_ALLOC_242,
-	NL80211_RATE_INFO_EHT_RU_ALLOC_484,
-	NL80211_RATE_INFO_EHT_RU_ALLOC_484P242,
-	NL80211_RATE_INFO_EHT_RU_ALLOC_996,
-	NL80211_RATE_INFO_EHT_RU_ALLOC_996P484,
-	NL80211_RATE_INFO_EHT_RU_ALLOC_996P484P242,
-	NL80211_RATE_INFO_EHT_RU_ALLOC_2x996,
-	NL80211_RATE_INFO_EHT_RU_ALLOC_2x996P484,
-	NL80211_RATE_INFO_EHT_RU_ALLOC_3x996,
-	NL80211_RATE_INFO_EHT_RU_ALLOC_3x996P484,
-	NL80211_RATE_INFO_EHT_RU_ALLOC_4x996,
-};
-
-/**
  * enum nl80211_rate_info - bitrate information
  *
  * These attribute types are used with %NL80211_STA_INFO_TXRATE
@@ -3491,13 +3390,6 @@ enum nl80211_eht_ru_alloc {
  * @NL80211_RATE_INFO_HE_DCM: HE DCM value (u8, 0/1)
  * @NL80211_RATE_INFO_RU_ALLOC: HE RU allocation, if not present then
  *	non-OFDMA was used (u8, see &enum nl80211_he_ru_alloc)
- * @NL80211_RATE_INFO_320_MHZ_WIDTH: 320 MHz bitrate
- * @NL80211_RATE_INFO_EHT_MCS: EHT MCS index (u8, 0-15)
- * @NL80211_RATE_INFO_EHT_NSS: EHT NSS value (u8, 1-8)
- * @NL80211_RATE_INFO_EHT_GI: EHT guard interval identifier
- *	(u8, see &enum nl80211_eht_gi)
- * @NL80211_RATE_INFO_EHT_RU_ALLOC: EHT RU allocation, if not present then
- *	non-OFDMA was used (u8, see &enum nl80211_eht_ru_alloc)
  * @__NL80211_RATE_INFO_AFTER_LAST: internal use
  */
 enum nl80211_rate_info {
@@ -3519,11 +3411,6 @@ enum nl80211_rate_info {
 	NL80211_RATE_INFO_HE_GI,
 	NL80211_RATE_INFO_HE_DCM,
 	NL80211_RATE_INFO_HE_RU_ALLOC,
-	NL80211_RATE_INFO_320_MHZ_WIDTH,
-	NL80211_RATE_INFO_EHT_MCS,
-	NL80211_RATE_INFO_EHT_NSS,
-	NL80211_RATE_INFO_EHT_GI,
-	NL80211_RATE_INFO_EHT_RU_ALLOC,
 
 	/* keep last */
 	__NL80211_RATE_INFO_AFTER_LAST,
@@ -3834,20 +3721,13 @@ enum nl80211_mpath_info {
  *     capabilities IE
  * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE: HE PPE thresholds information as
  *     defined in HE capabilities IE
+ * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band HE capability attribute currently
+ *     defined
  * @NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA: HE 6GHz band capabilities (__le16),
  *	given for all 6 GHz band channels
  * @NL80211_BAND_IFTYPE_ATTR_VENDOR_ELEMS: vendor element capabilities that are
  *	advertised on this band/for this iftype (binary)
- * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MAC: EHT MAC capabilities as in EHT
- *	capabilities element
- * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PHY: EHT PHY capabilities as in EHT
- *	capabilities element
- * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MCS_SET: EHT supported NSS/MCS as in EHT
- *	capabilities element
- * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE: EHT PPE thresholds information as
- *	defined in EHT capabilities element
  * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use
- * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band attribute currently defined
  */
 enum nl80211_band_iftype_attr {
 	__NL80211_BAND_IFTYPE_ATTR_INVALID,
@@ -3859,10 +3739,6 @@ enum nl80211_band_iftype_attr {
 	NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE,
 	NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA,
 	NL80211_BAND_IFTYPE_ATTR_VENDOR_ELEMS,
-	NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MAC,
-	NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PHY,
-	NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MCS_SET,
-	NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE,
 
 	/* keep last */
 	__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST,
@@ -4007,10 +3883,6 @@ enum nl80211_wmm_rule {
  *	on this channel in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_16MHZ: 16 MHz operation is allowed
  *	on this channel in current regulatory domain.
- * @NL80211_FREQUENCY_ATTR_NO_320MHZ: any 320 MHz channel using this channel
- *	as the primary or any of the secondary channels isn't possible
- * @NL80211_FREQUENCY_ATTR_NO_EHT: EHT operation is not allowed on this channel
- *	in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
  *	currently defined
  * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
@@ -4047,8 +3919,6 @@ enum nl80211_frequency_attr {
 	NL80211_FREQUENCY_ATTR_4MHZ,
 	NL80211_FREQUENCY_ATTR_8MHZ,
 	NL80211_FREQUENCY_ATTR_16MHZ,
-	NL80211_FREQUENCY_ATTR_NO_320MHZ,
-	NL80211_FREQUENCY_ATTR_NO_EHT,
 
 	/* keep last */
 	__NL80211_FREQUENCY_ATTR_AFTER_LAST,
@@ -4247,7 +4117,6 @@ enum nl80211_sched_scan_match_attr {
  * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed
  * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed
  * @NL80211_RRF_NO_HE: HE operation not allowed
- * @NL80211_RRF_NO_320MHZ: 320MHz operation not allowed
  */
 enum nl80211_reg_rule_flags {
 	NL80211_RRF_NO_OFDM		= 1<<0,
@@ -4266,7 +4135,6 @@ enum nl80211_reg_rule_flags {
 	NL80211_RRF_NO_80MHZ		= 1<<15,
 	NL80211_RRF_NO_160MHZ		= 1<<16,
 	NL80211_RRF_NO_HE		= 1<<17,
-	NL80211_RRF_NO_320MHZ		= 1<<18,
 };
 
 #define NL80211_RRF_PASSIVE_SCAN	NL80211_RRF_NO_IR
@@ -4764,8 +4632,6 @@ enum nl80211_key_mode {
  * @NL80211_CHAN_WIDTH_4: 4 MHz OFDM channel
  * @NL80211_CHAN_WIDTH_8: 8 MHz OFDM channel
  * @NL80211_CHAN_WIDTH_16: 16 MHz OFDM channel
- * @NL80211_CHAN_WIDTH_320: 320 MHz channel, the %NL80211_ATTR_CENTER_FREQ1
- *	attribute must be provided as well
  */
 enum nl80211_chan_width {
 	NL80211_CHAN_WIDTH_20_NOHT,
@@ -4781,7 +4647,6 @@ enum nl80211_chan_width {
 	NL80211_CHAN_WIDTH_4,
 	NL80211_CHAN_WIDTH_8,
 	NL80211_CHAN_WIDTH_16,
-	NL80211_CHAN_WIDTH_320,
 };
 
 /**
@@ -5096,7 +4961,6 @@ enum nl80211_txrate_gi {
  * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 69.12 GHz)
  * @NL80211_BAND_6GHZ: around 6 GHz band (5.9 - 7.2 GHz)
  * @NL80211_BAND_S1GHZ: around 900MHz, supported by S1G PHYs
- * @NL80211_BAND_LC: light communication band (placeholder)
  * @NUM_NL80211_BANDS: number of bands, avoid using this in userspace
  *	since newer kernel versions may support more bands
  */
@@ -5106,7 +4970,6 @@ enum nl80211_band {
 	NL80211_BAND_60GHZ,
 	NL80211_BAND_6GHZ,
 	NL80211_BAND_S1GHZ,
-	NL80211_BAND_LC,
 
 	NUM_NL80211_BANDS,
 };
@@ -5673,7 +5536,7 @@ enum nl80211_iface_limit_attrs {
  *	=> allows 8 of AP/GO that can have BI gcd >= min gcd
  *
  *	numbers = [ #{STA} <= 2 ], channels = 2, max = 2
- *	=> allows two STAs on the same or on different channels
+ *	=> allows two STAs on different channels
  *
  *	numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4
  *	=> allows a STA plus three P2P interfaces
@@ -5718,7 +5581,7 @@ enum nl80211_if_combination_attrs {
  * @NL80211_PLINK_ESTAB: mesh peer link is established
  * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled
  * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh
- *	plink are discarded, except for authentication frames
+ *	plink are discarded
  * @NUM_NL80211_PLINK_STATES: number of peer link states
  * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states
  */
@@ -5855,15 +5718,13 @@ enum nl80211_tdls_operation {
 	NL80211_TDLS_DISABLE_LINK,
 };
 
-/**
+/*
  * enum nl80211_ap_sme_features - device-integrated AP features
- * @NL80211_AP_SME_SA_QUERY_OFFLOAD: SA Query procedures offloaded to driver
- *	when user space indicates support for SA Query procedures offload during
- *	"start ap" with %NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT.
- */
+ * Reserved for future use, no bits are defined in
+ * NL80211_ATTR_DEVICE_AP_SME yet.
 enum nl80211_ap_sme_features {
-	NL80211_AP_SME_SA_QUERY_OFFLOAD		= 1 << 0,
 };
+ */
 
 /**
  * enum nl80211_feature_flags - device/driver features
@@ -6166,11 +6027,6 @@ enum nl80211_feature_flags {
  * @NL80211_EXT_FEATURE_BSS_COLOR: The driver supports BSS color collision
  *	detection and change announcemnts.
  *
- * @NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD: Driver running in AP mode supports
- *	FILS encryption and decryption for (Re)Association Request and Response
- *	frames. Userspace has to share FILS AAD details to the driver by using
- *	@NL80211_CMD_SET_FILS_AAD.
- *
  * @NL80211_EXT_FEATURE_RADAR_BACKGROUND: Device supports background radar/CAC
  *	detection.
  *
@@ -6239,7 +6095,6 @@ enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_SECURE_RTT,
 	NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE,
 	NL80211_EXT_FEATURE_BSS_COLOR,
-	NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD,
 	NL80211_EXT_FEATURE_RADAR_BACKGROUND,
 
 	/* add new features before the definition below */
@@ -7548,7 +7403,7 @@ enum nl80211_sar_specs_attrs {
  * @NL80211_MBSSID_CONFIG_ATTR_MAX_EMA_PROFILE_PERIODICITY: Used by the kernel
  *	to advertise the maximum profile periodicity supported by the driver
  *	if EMA is enabled. Driver should indicate EMA support to the userspace
- *	by setting wiphy->ema_max_profile_periodicity to
+ *	by setting wiphy->mbssid_max_ema_profile_periodicity to
  *	a non-zero value.
  *
  * @NL80211_MBSSID_CONFIG_ATTR_INDEX: Mandatory parameter to pass the index of
@@ -7567,7 +7422,7 @@ enum nl80211_sar_specs_attrs {
  *
  * @NL80211_MBSSID_CONFIG_ATTR_EMA: Flag used to enable EMA AP feature.
  *	Setting this flag is permitted only if the driver advertises EMA support
- *	by setting wiphy->ema_max_profile_periodicity to non-zero.
+ *	by setting wiphy->mbssid_max_ema_profile_periodicity to non-zero.
  *
  * @__NL80211_MBSSID_CONFIG_ATTR_LAST: Internal
  * @NL80211_MBSSID_CONFIG_ATTR_MAX: highest attribute
@@ -7586,20 +7441,4 @@ enum nl80211_mbssid_config_attributes {
 	NL80211_MBSSID_CONFIG_ATTR_MAX = __NL80211_MBSSID_CONFIG_ATTR_LAST - 1,
 };
 
-/**
- * enum nl80211_ap_settings_flags - AP settings flags
- *
- * @NL80211_AP_SETTINGS_EXTERNAL_AUTH_SUPPORT: AP supports external
- *	authentication.
- * @NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT: Userspace supports SA Query
- *	procedures offload to driver. If driver advertises
- *	%NL80211_AP_SME_SA_QUERY_OFFLOAD in AP SME features, userspace shall
- *	ignore SA Query procedures and validations when this flag is set by
- *	userspace.
- */
-enum nl80211_ap_settings_flags {
-	NL80211_AP_SETTINGS_EXTERNAL_AUTH_SUPPORT	= 1 << 0,
-	NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT	= 1 << 1,
-};
-
 #endif /* __LINUX_NL80211_H */
--- a/event.c
+++ b/event.c
@@ -1292,9 +1292,6 @@ static int print_event(struct nl_msg *ms
 	case NL80211_CMD_CH_SWITCH_NOTIFY:
 		parse_ch_switch_notify(tb, gnlh->cmd);
 		break;
-	case NL80211_CMD_ASSOC_COMEBACK: /* 147 */
-		parse_assoc_comeback(tb, gnlh->cmd);
-		break;
 	default:
 		printf("unknown event %d (%s)\n",
 		       gnlh->cmd, command_name(gnlh->cmd));
--- a/info.c
+++ b/info.c
@@ -164,7 +164,6 @@ static void ext_feat_print(enum nl80211_
 	ext_feat_case(PROT_RANGE_NEGO_AND_MEASURE,
 		      "support for MFP in range measurement negotiation/procedure");
 	ext_feat_case(BSS_COLOR, "BSS coloring support");
-	ext_feat_case(FILS_CRYPTO_OFFLOAD, "FILS crypto offload");
 	ext_feat_case(RADAR_BACKGROUND, "Radar background support");
 	}
 }
--- a/interface.c
+++ b/interface.c
@@ -362,8 +362,6 @@ char *channel_width_name(enum nl80211_ch
 		return "5 MHz";
 	case NL80211_CHAN_WIDTH_10:
 		return "10 MHz";
-	case NL80211_CHAN_WIDTH_320:
-		return "320 MHz";
 	default:
 		return "unknown";
 	}
--- a/util.c
+++ b/util.c
@@ -508,7 +508,6 @@ static int parse_freqs(struct chandef *c
 	case NL80211_CHAN_WIDTH_40:
 	case NL80211_CHAN_WIDTH_80:
 	case NL80211_CHAN_WIDTH_160:
-	case NL80211_CHAN_WIDTH_320:
 		need_cf1 = true;
 		break;
 	case NL80211_CHAN_WIDTH_1:
@@ -626,10 +625,6 @@ int parse_freqchan(struct chandef *chand
 		  .width = NL80211_CHAN_WIDTH_160,
 		  .freq1_diff = 0,
 		  .chantype = -1 },
-		{ .name = "320MHz",
-		  .width = NL80211_CHAN_WIDTH_320,
-		  .freq1_diff = 0,
-		  .chantype = -1 },
 	};
 	const struct chanmode *chanmode_selected = NULL;
 	unsigned int freq;
@@ -1599,48 +1594,6 @@ void print_eht_info(struct nlattr *nl_if
 	print_iftype_line(tb[NL80211_BAND_IFTYPE_ATTR_IFTYPES]);
 	printf("\n");
 
-	if (tb[NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MAC]) {
-		len = nla_len(tb[NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MAC]);
-		if (len > sizeof(mac_cap))
-			len = sizeof(mac_cap);
-		memcpy(mac_cap,
-		       nla_data(tb[NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MAC]),
-		       len);
-	}
-
-	if (tb[NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PHY]) {
-		len = nla_len(tb[NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PHY]);
-
-		if (len > sizeof(phy_cap))
-			len = sizeof(phy_cap);
-
-		memcpy(phy_cap,
-		       nla_data(tb[NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PHY]),
-		       len);
-	}
-
-	if (tb[NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MCS_SET]) {
-		len = nla_len(tb[NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MCS_SET]);
-		if (len > sizeof(mcs_set))
-			len = sizeof(mcs_set);
-		memcpy(mcs_set,
-		       nla_data(tb[NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MCS_SET]),
-		       len);
-
-		// Assume that all parts of the MCS set are present
-		mcs_len = sizeof(mcs_set);
-	}
-
-	if (tb[NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE]) {
-		len = nla_len(tb[NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE]);
-		if (len > sizeof(ppet))
-			len = sizeof(ppet);
-		memcpy(ppet,
-		       nla_data(tb[NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE]),
-		       len);
-		ppet_len = len;
-	}
-
 	if (tb[NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY]) {
 		len = nla_len(tb[NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY]);
 
--- a/reg.c
+++ b/reg.c
@@ -210,7 +210,6 @@ static int print_reg_handler(struct nl_m
 		PARSE_FLAG(NL80211_RRF_NO_80MHZ, "NO-80MHZ");
 		PARSE_FLAG(NL80211_RRF_NO_160MHZ, "NO-160MHZ");
 		PARSE_FLAG(NL80211_RRF_NO_HE, "NO-HE");
-		PARSE_FLAG(NL80211_RRF_NO_320MHZ, "NO-320MHZ");
 
 		/* Kernels that support NO_IR always turn on both flags */
 		if ((flags & NL80211_RRF_NO_IR) && (flags & __NL80211_RRF_NO_IBSS)) {
--- a/station.c
+++ b/station.c
@@ -239,8 +239,6 @@ void parse_bitrate(struct nlattr *bitrat
 		pos += snprintf(pos, buflen - (pos - buf), " 80P80MHz");
 	if (rinfo[NL80211_RATE_INFO_160_MHZ_WIDTH])
 		pos += snprintf(pos, buflen - (pos - buf), " 160MHz");
-	if (rinfo[NL80211_RATE_INFO_320_MHZ_WIDTH])
-		pos += snprintf(pos, buflen - (pos - buf), " 320MHz");
 	if (rinfo[NL80211_RATE_INFO_SHORT_GI])
 		pos += snprintf(pos, buflen - (pos - buf), " short GI");
 	if (rinfo[NL80211_RATE_INFO_VHT_NSS])
@@ -261,18 +259,6 @@ void parse_bitrate(struct nlattr *bitrat
 	if (rinfo[NL80211_RATE_INFO_HE_RU_ALLOC])
 		pos += snprintf(pos, buflen - (pos - buf),
 				" HE-RU-ALLOC %d", nla_get_u8(rinfo[NL80211_RATE_INFO_HE_RU_ALLOC]));
-	if (rinfo[NL80211_RATE_INFO_EHT_MCS])
-		pos += snprintf(pos, buflen - (pos - buf),
-				" EHT-MCS %d", nla_get_u8(rinfo[NL80211_RATE_INFO_EHT_MCS]));
-	if (rinfo[NL80211_RATE_INFO_EHT_NSS])
-		pos += snprintf(pos, buflen - (pos - buf),
-				" EHT-NSS %d", nla_get_u8(rinfo[NL80211_RATE_INFO_EHT_NSS]));
-	if (rinfo[NL80211_RATE_INFO_EHT_GI])
-		pos += snprintf(pos, buflen - (pos - buf),
-				" EHT-GI %d", nla_get_u8(rinfo[NL80211_RATE_INFO_EHT_GI]));
-	if (rinfo[NL80211_RATE_INFO_EHT_RU_ALLOC])
-		pos += snprintf(pos, buflen - (pos - buf),
-				" EHT-RU-ALLOC %d", nla_get_u8(rinfo[NL80211_RATE_INFO_EHT_RU_ALLOC]));
 }
 
 static char *get_chain_signal(struct nlattr *attr_list)