/* FILE NAME: air_port.h | |
* PURPOSE: | |
* Define port function in AIR SDK. | |
* | |
* NOTES: | |
* None | |
*/ | |
#ifndef AIR_PORT_H | |
#define AIR_PORT_H | |
/* INCLUDE FILE DECLARATIONS | |
*/ | |
/* NAMING CONSTANT DECLARATIONS | |
*/ | |
#define AIR_MAX_NUM_OF_UNIT (1) | |
#define AIR_DST_DEFAULT_PORT (31) | |
#define AIR_PORT_TX (0x00) | |
#define AIR_PORT_RX (0x01) | |
#define AIR_MAX_NUM_OF_PORTS (7) | |
#define AIR_MAX_NUM_OF_GIGA_PORTS (5) | |
#define AIR_SGMII_PORT_OFFSET_BEGIN (5) | |
#define AIR_SGMII_PORT_OFFSET_END (6) | |
#define AIR_ALL_PORT_BITMAP (0x7F) | |
/* Definition of Power Saving mode */ | |
#define AIR_PORT_PS_LINKSTATUS (0x1 << 0) | |
#define AIR_PORT_PS_EEE (0x1 << 1) | |
#define AIR_PORT_PS_MASK (0x3) | |
/* MACRO FUNCTION DECLARATIONS | |
*/ | |
/* DATA TYPE DECLARATIONS | |
*/ | |
/* AIR_PORT_BITMAP_T is the data type for physical port bitmap. */ | |
#define AIR_BITMAP_SIZE(bit_num) ((((bit_num) - 1) / AIR_MAX_NUM_OF_PORTS) + 1) | |
#define AIR_PORT_BITMAP_SIZE AIR_BITMAP_SIZE(AIR_MAX_NUM_OF_PORTS) | |
typedef UI32_T AIR_PORT_BITMAP_T[AIR_PORT_BITMAP_SIZE]; | |
#define AIR_INVALID_ID (0xFFFFFFFF) | |
#define AIR_PORT_INVALID (AIR_INVALID_ID) | |
/* Definition of SGMII mode */ | |
typedef enum | |
{ | |
AIR_PORT_SGMII_MODE_AN, | |
AIR_PORT_SGMII_MODE_FORCE, | |
AIR_PORT_SGMII_MODE_LAST | |
}AIR_PORT_SGMII_MODE_T; | |
/* Definition of port speed */ | |
typedef enum | |
{ | |
AIR_PORT_SPEED_10M, | |
AIR_PORT_SPEED_100M, | |
AIR_PORT_SPEED_1000M, | |
AIR_PORT_SPEED_2500M, | |
AIR_PORT_SPEED_LAST | |
}AIR_PORT_SPEED_T; | |
typedef enum | |
{ | |
AIR_PORT_DUPLEX_HALF, | |
AIR_PORT_DUPLEX_FULL, | |
AIR_PORT_DUPLEX_LAST | |
}AIR_PORT_DUPLEX_T; | |
typedef enum | |
{ | |
AIR_PORT_LINK_DOWN, | |
AIR_PORT_LINK_UP, | |
AIR_PORT_LINK_LAST | |
}AIR_PORT_LINK_T; | |
/* Definition of Smart speed down will occur after AN failed how many times */ | |
typedef enum | |
{ | |
AIR_PORT_SSD_2T, | |
AIR_PORT_SSD_3T, | |
AIR_PORT_SSD_4T, | |
AIR_PORT_SSD_5T, | |
AIR_PORT_SSD_LAST | |
}AIR_PORT_SSD_T; | |
typedef enum | |
{ | |
AIR_PORT_VLAN_MODE_PORT_MATRIX = 0, /* Port matrix mode */ | |
AIR_PORT_VLAN_MODE_FALLBACK, /* Fallback mode */ | |
AIR_PORT_VLAN_MODE_CHECK, /* Check mode */ | |
AIR_PORT_VLAN_MODE_SECURITY, /* Security mode */ | |
AIR_PORT_VLAN_MODE_LAST | |
} AIR_PORT_VLAN_MODE_T; | |
/* Definition of AN Advertisement Register */ | |
typedef struct AIR_AN_ADV_S | |
{ | |
BOOL_T advCap10HDX; /* Advertises 10 BASE-T HDX */ | |
BOOL_T advCap10FDX; /* Advertises 10 BASE-T FDX */ | |
BOOL_T advCap100HDX; /* Advertises 100 BASE-T HDX */ | |
BOOL_T advCap100FDX; /* Advertises 100 BASE-T FDX */ | |
BOOL_T advCap1000FDX; /* Advertises 1000 BASE-T FDX */ | |
BOOL_T advPause; /* Advertieses Asynchronous Pause */ | |
}AIR_AN_ADV_T; | |
/* Definition of Link Status of a specific port */ | |
typedef struct AIR_PORT_STATUS_S | |
{ | |
BOOL_T link; | |
BOOL_T duplex; | |
UI32_T speed; | |
}AIR_PORT_STATUS_T; | |
/* EXPORTED SUBPROGRAM SPECIFICATIONS | |
*/ | |
/* FUNCTION NAME: air_port_setPortMatrix | |
* PURPOSE: | |
* Set port matrix from the specified device. | |
* | |
* INPUT: | |
* unit -- Unit id | |
* port -- Port id | |
* port_bitmap -- Matrix port bitmap | |
* | |
* OUTPUT: | |
* None | |
* | |
* RETURN: | |
* AIR_E_OK | |
* AIR_E_OTHERS | |
* AIR_E_BAD_PARAMETER | |
* | |
* NOTES: | |
* none | |
*/ | |
AIR_ERROR_NO_T | |
air_port_setPortMatrix( | |
const UI32_T unit, | |
const UI32_T port, | |
const UI32_T port_bitmap); | |
/* FUNCTION NAME: air_port_getPortMatrix | |
* PURPOSE: | |
* Get port matrix from the specified device. | |
* | |
* INPUT: | |
* unit -- Unit id | |
* port -- Port id | |
* | |
* OUTPUT: | |
* p_port_bitmap -- Matrix port bitmap | |
* | |
* RETURN: | |
* AIR_E_OK | |
* AIR_E_OTHERS | |
* AIR_E_BAD_PARAMETER | |
* | |
* NOTES: | |
* none | |
*/ | |
AIR_ERROR_NO_T | |
air_port_getPortMatrix( | |
const UI32_T unit, | |
const UI32_T port, | |
UI32_T *p_port_bitmap); | |
/* FUNCTION NAME: air_port_setVlanMode | |
* PURPOSE: | |
* Set port-based vlan mechanism from the specified device. | |
* | |
* INPUT: | |
* unit -- Unit id | |
* port -- Port id | |
* mode -- Port vlan mode | |
* | |
* OUTPUT: | |
* None | |
* | |
* RETURN: | |
* AIR_E_OK | |
* AIR_E_OTHERS | |
* AIR_E_BAD_PARAMETER | |
* | |
* NOTES: | |
* none | |
*/ | |
AIR_ERROR_NO_T | |
air_port_setVlanMode( | |
const UI32_T unit, | |
const UI32_T port, | |
const AIR_PORT_VLAN_MODE_T mode); | |
/* FUNCTION NAME: air_port_getVlanMode | |
* PURPOSE: | |
* Get port-based vlan mechanism from the specified device. | |
* | |
* INPUT: | |
* unit -- Unit id | |
* port -- Port id | |
* | |
* OUTPUT: | |
* p_mode -- Port vlan mode | |
* | |
* RETURN: | |
* AIR_E_OK | |
* AIR_E_OTHERS | |
* AIR_E_BAD_PARAMETER | |
* | |
* NOTES: | |
* none | |
*/ | |
AIR_ERROR_NO_T | |
air_port_getVlanMode( | |
const UI32_T unit, | |
const UI32_T port, | |
AIR_PORT_VLAN_MODE_T *p_mode); | |
/* FUNCTION NAME: air_port_setAnMode | |
* PURPOSE: | |
* Set the auto-negotiation mode for a specific port.(Auto or Forced) | |
* | |
* INPUT: | |
* unit -- Device ID | |
* port -- Index of port number | |
* state -- FALSE:Disable | |
* TRUE: Enable | |
* OUTPUT: | |
* None | |
* | |
* RETURN: | |
* AIR_E_OK | |
* AIR_E_BAD_PARAMETER | |
* | |
* NOTES: | |
* None | |
*/ | |
AIR_ERROR_NO_T | |
air_port_setAnMode( | |
const UI32_T unit, | |
const UI32_T port, | |
const BOOL_T state); | |
/* FUNCTION NAME: air_port_getAnMode | |
* PURPOSE: | |
* Get the auto-negotiation mode for a specific port. | |
* | |
* INPUT: | |
* unit -- Device ID | |
* port -- Index of port number | |
* | |
* OUTPUT: | |
* state -- FALSE:Disable | |
* TRUE: Enable | |
* RETURN: | |
* AIR_E_OK | |
* AIR_E_BAD_PARAMETER | |
* | |
* NOTES: | |
* None | |
*/ | |
AIR_ERROR_NO_T | |
air_port_getAnMode( | |
const UI32_T unit, | |
const UI32_T port, | |
BOOL_T *ptr_state); | |
/* FUNCTION NAME: air_port_setLocalAdvAbility | |
* PURPOSE: | |
* Set the auto-negotiation advertisement for a | |
* specific port. | |
* | |
* INPUT: | |
* unit -- Device ID | |
* port -- Index of port number | |
* adv -- AN advertisement setting | |
* | |
* OUTPUT: | |
* None | |
* | |
* RETURN: | |
* AIR_E_OK | |
* AIR_E_BAD_PARAMETER | |
* | |
* NOTES: | |
* None | |
*/ | |
AIR_ERROR_NO_T | |
air_port_setLocalAdvAbility( | |
const UI32_T unit, | |
const UI32_T port, | |
const AIR_AN_ADV_T adv); | |
/* FUNCTION NAME: air_port_getLocalAdvAbility | |
* PURPOSE: | |
* Get the auto-negotiation advertisement for a | |
* specific port. | |
* | |
* INPUT: | |
* unit -- Device ID | |
* port -- Index of port number | |
* | |
* OUTPUT: | |
* ptr_adv -- AN advertisement setting | |
* | |
* RETURN: | |
* AIR_E_OK | |
* AIR_E_BAD_PARAMETER | |
* | |
* NOTES: | |
* None | |
*/ | |
AIR_ERROR_NO_T | |
air_port_getLocalAdvAbility( | |
const UI32_T unit, | |
const UI32_T port, | |
AIR_AN_ADV_T *ptr_adv); | |
/* FUNCTION NAME: air_port_getRemoteAdvAbility | |
* PURPOSE: | |
* Get the auto-negotiation remote advertisement for a | |
* specific port. | |
* | |
* INPUT: | |
* unit -- Device ID | |
* port -- Index of port number | |
* | |
* OUTPUT: | |
* ptr_lp_adv -- AN advertisement of link partner | |
* | |
* RETURN: | |
* AIR_E_OK | |
* AIR_E_BAD_PARAMETER | |
* | |
* NOTES: | |
* None | |
*/ | |
AIR_ERROR_NO_T | |
air_port_getRemoteAdvAbility( | |
const UI32_T unit, | |
const UI32_T port, | |
AIR_AN_ADV_T *ptr_lp_adv); | |
/* FUNCTION NAME: air_port_setSpeed | |
* PURPOSE: | |
* Set the speed for a specific port. | |
* This setting is used on force mode only. | |
* | |
* INPUT: | |
* unit -- Device ID | |
* port -- Index of port number | |
* speed -- AIR_PORT_SPEED_10M: 10Mbps | |
* AIR_PORT_SPEED_100M: 100Mbps | |
* AIR_PORT_SPEED_1000M:1Gbps | |
* AIR_PORT_SPEED_2500M:2.5Gbps (Port5, Port6) | |
* OUTPUT: | |
* None | |
* | |
* RETURN: | |
* AIR_E_OK | |
* AIR_E_BAD_PARAMETER | |
* | |
* NOTES: | |
* None | |
*/ | |
AIR_ERROR_NO_T | |
air_port_setSpeed( | |
const UI32_T unit, | |
const UI32_T port, | |
const UI32_T speed); | |
/* FUNCTION NAME: air_port_getSpeed | |
* PURPOSE: | |
* Get the speed for a specific port. | |
* | |
* INPUT: | |
* unit -- Device ID | |
* port -- Index of port number | |
* | |
* OUTPUT: | |
* ptr_speed -- AIR_PORT_SPEED_10M: 10Mbps | |
* AIR_PORT_SPEED_100M: 100Mbps | |
* AIR_PORT_SPEED_1000M:1Gbps | |
* RETURN: | |
* AIR_E_OK | |
* AIR_E_BAD_PARAMETER | |
* | |
* NOTES: | |
* None | |
*/ | |
AIR_ERROR_NO_T | |
air_port_getSpeed( | |
const UI32_T unit, | |
const UI32_T port, | |
UI32_T *ptr_speed); | |
/* FUNCTION NAME: air_port_setDuplex | |
* PURPOSE: | |
* Get the duplex for a specific port. | |
* This setting is used on force mode only. | |
* | |
* INPUT: | |
* unit -- Device ID | |
* port -- Index of port number | |
* duplex -- AIR_PORT_DUPLEX_HALF | |
* AIR_PORT_DUPLEX_FULL | |
* OUTPUT: | |
* None | |
* | |
* RETURN: | |
* AIR_E_OK | |
* AIR_E_BAD_PARAMETER | |
* | |
* NOTES: | |
* None | |
*/ | |
AIR_ERROR_NO_T | |
air_port_setDuplex( | |
const UI32_T unit, | |
const UI32_T port, | |
const BOOL_T duplex); | |
/* FUNCTION NAME: air_port_getDuplex | |
* PURPOSE: | |
* Get the duplex for a specific port. | |
* | |
* INPUT: | |
* unit -- Device ID | |
* port -- Index of port number | |
* | |
* OUTPUT: | |
* ptr_duplex -- AIR_PORT_DUPLEX_HALF | |
* AIR_PORT_DUPLEX_FULL | |
* RETURN: | |
* AIR_E_OK | |
* AIR_E_BAD_PARAMETER | |
* | |
* NOTES: | |
* None | |
*/ | |
AIR_ERROR_NO_T | |
air_port_getDuplex( | |
const UI32_T unit, | |
const UI32_T port, | |
BOOL_T *ptr_duplex); | |
/* FUNCTION NAME: air_port_getLink | |
* PURPOSE: | |
* Get the physical link status for a specific port. | |
* | |
* INPUT: | |
* unit -- Device ID | |
* port -- Index of port number | |
* | |
* OUTPUT: | |
* ptr_ps -- AIR_PORT_STATUS_T | |
* | |
* RETURN: | |
* AIR_E_OK | |
* AIR_E_BAD_PARAMETER | |
* | |
* NOTES: | |
* None | |
*/ | |
AIR_ERROR_NO_T | |
air_port_getLink( | |
const UI32_T unit, | |
const UI32_T port, | |
AIR_PORT_STATUS_T *ptr_ps); | |
/* FUNCTION NAME: air_port_setBckPres | |
* PURPOSE: | |
* Set the back pressure configuration for a specific port. | |
* | |
* INPUT: | |
* unit -- Device ID | |
* port -- Index of port number | |
* bckPres -- FALSE:Disable | |
* TRUE: Enable | |
* OUTPUT: | |
* None | |
* | |
* RETURN: | |
* AIR_E_OK | |
* AIR_E_BAD_PARAMETER | |
* | |
* NOTES: | |
* None | |
*/ | |
AIR_ERROR_NO_T | |
air_port_setBckPres( | |
const UI32_T unit, | |
const UI32_T port, | |
const BOOL_T bckPres); | |
/* FUNCTION NAME: air_port_getBckPres | |
* PURPOSE: | |
* Get the back pressure configuration for a specific port. | |
* | |
* INPUT: | |
* unit -- Device ID | |
* port -- Index of port number | |
* | |
* OUTPUT: | |
* ptr_bckPres -- FALSE:Disable | |
* TRUE: Enable | |
* RETURN: | |
* AIR_E_OK | |
* AIR_E_BAD_PARAMETER | |
* | |
* NOTES: | |
* None | |
*/ | |
AIR_ERROR_NO_T | |
air_port_getBckPres( | |
const UI32_T unit, | |
const UI32_T port, | |
BOOL_T *ptr_bckPres); | |
/* FUNCTION NAME: air_port_setFlowCtrl | |
* PURPOSE: | |
* Set the flow control configuration for specific port. | |
* | |
* INPUT: | |
* unit -- Select device ID | |
* port -- Select port number (0 - 6) | |
* dir -- Directions of AIR_PORT_TX or AIR_PORT_RX | |
* fc_en -- TRUE: Enable select port flow control | |
* FALSE:Disable select port flow control | |
* OUTPUT: | |
* None | |
* | |
* RETURN: | |
* AIR_E_OK | |
* AIR_E_BAD_PARAMETER | |
* | |
* NOTES: | |
* None | |
*/ | |
AIR_ERROR_NO_T | |
air_port_setFlowCtrl( | |
const UI32_T unit, | |
const UI32_T port, | |
const BOOL_T dir, | |
const BOOL_T fc_en); | |
/* FUNCTION NAME: air_port_getFlowCtrl | |
* PURPOSE: | |
* Get the flow control configuration for specific port. | |
* | |
* INPUT: | |
* unit -- Select device ID | |
* port -- Select port number (0..6) | |
* dir -- AIR_PORT_TX | |
* AIR_PORT_RX | |
* OUTPUT: | |
* ptr_fc_en -- FALSE: Port flow control disable | |
* TRUE: Port flow control enable | |
* RETURN: | |
* AIR_E_OK | |
* AIR_E_BAD_PARAMETER | |
* | |
* NOTES: | |
* None | |
*/ | |
AIR_ERROR_NO_T | |
air_port_getFlowCtrl( | |
const UI32_T unit, | |
const UI32_T port, | |
const BOOL_T dir, | |
BOOL_T *ptr_fc_en); | |
/* FUNCTION NAME: air_port_setJumbo | |
* PURPOSE: | |
* Set accepting jumbo frmes with specificied size. | |
* | |
* INPUT: | |
* unit -- Select device ID | |
* pkt_len -- Select max packet length | |
* RX_PKT_LEN_1518 | |
* RX_PKT_LEN_1536 | |
* RX_PKT_LEN_1552 | |
* RX_PKT_LEN_MAX_JUMBO | |
* frame_len -- Select max lenght of jumbo frames | |
* Range : 2 - 15 | |
* Units : K Bytes | |
* OUTPUT: | |
* None | |
* | |
* RETURN: | |
* AIR_E_OK | |
* AIR_E_BAD_PARAMETER | |
* | |
* NOTES: | |
* None | |
*/ | |
AIR_ERROR_NO_T | |
air_port_setJumbo( | |
const UI32_T unit, | |
const UI32_T pkt_len, | |
const UI32_T frame_len); | |
/* FUNCTION NAME: air_port_getJumbo | |
* PURPOSE: | |
* Get accepting jumbo frmes with specificied size. | |
* | |
* INPUT: | |
* unit -- Select device ID | |
* | |
* OUTPUT: | |
* ptr_pkt_len -- Select max packet length | |
* RX_PKT_LEN_1518 | |
* RX_PKT_LEN_1536 | |
* RX_PKT_LEN_1552 | |
* RX_PKT_LEN_MAX_JUMBO | |
* ptr_frame_len -- Select max lenght of jumbo frames | |
* Range : 2 - 15 | |
* Units : K Bytes | |
* RETURN: | |
* AIR_E_OK | |
* AIR_E_BAD_PARAMETER | |
* | |
* NOTES: | |
* None | |
*/ | |
AIR_ERROR_NO_T | |
air_port_getJumbo( | |
const UI32_T unit, | |
UI32_T *ptr_pkt_len, | |
UI32_T *ptr_frame_len); | |
/* FUNCTION NAME: air_port_setPsMode | |
* PURPOSE: | |
* Set the power saving mode for a specific port. | |
* | |
* INPUT: | |
* unit -- Device ID | |
* port -- Index of port number | |
* mode -- Bit-map: | |
* AIR_PORT_PS_LINKSTATUS | |
* AIR_PORT_PS_EEE | |
* FALSE: Disable / TRUE: Enable | |
* OUTPUT: | |
* None | |
* | |
* RETURN: | |
* AIR_E_OK | |
* AIR_E_BAD_PARAMETER | |
* | |
* NOTES: | |
* None | |
*/ | |
AIR_ERROR_NO_T | |
air_port_setPsMode( | |
const UI32_T unit, | |
const UI32_T port, | |
const UI32_T mode); | |
/* FUNCTION NAME: air_port_getPsMode | |
* PURPOSE: | |
* Get the power saving mode for a specific port. | |
* | |
* INPUT: | |
* unit -- Device ID | |
* port -- Index of port number | |
* OUTPUT: | |
* ptr_mode -- Bit-map: | |
* AIR_PORT_PS_LINKSTATUS | |
* AIR_PORT_PS_EEE | |
* FALSE: Disable / TRUE: Enable | |
* RETURN: | |
* AIR_E_OK | |
* AIR_E_BAD_PARAMETER | |
* | |
* NOTES: | |
* None | |
*/ | |
AIR_ERROR_NO_T | |
air_port_getPsMode( | |
const UI32_T unit, | |
const UI32_T port, | |
UI32_T *ptr_mode); | |
/* FUNCTION NAME: air_port_setSmtSpdDwn | |
* PURPOSE: | |
* Set Smart speed down feature for a specific port. | |
* | |
* INPUT: | |
* unit -- Device ID | |
* port -- Index of port number | |
* state -- FALSE:Disable | |
* TRUE: Enable | |
* time -- AIR_PORT_SSD_2T | |
* AIR_PORT_SSD_3T | |
* AIR_PORT_SSD_4T | |
* AIR_PORT_SSD_5T | |
* OUTPUT: | |
* None | |
* | |
* RETURN: | |
* AIR_E_OK | |
* AIR_E_BAD_PARAMETER | |
* | |
* NOTES: | |
* None | |
*/ | |
AIR_ERROR_NO_T | |
air_port_setSmtSpdDwn( | |
const UI32_T unit, | |
const UI32_T port, | |
const BOOL_T state, | |
const UI32_T time); | |
/* FUNCTION NAME: air_port_getSmtSpdDwn | |
* PURPOSE: | |
* Get Smart speed down feature for a specific port. | |
* | |
* INPUT: | |
* unit -- Device ID | |
* port -- Index of port number | |
* | |
* OUTPUT: | |
* ptr_state -- FALSE:Disable | |
* TRUE: Enable | |
* ptr_time -- AIR_PORT_SSD_2T | |
* AIR_PORT_SSD_3T | |
* AIR_PORT_SSD_4T | |
* AIR_PORT_SSD_5T | |
* RETURN: | |
* AIR_E_OK | |
* AIR_E_BAD_PARAMETER | |
* | |
* NOTES: | |
* None | |
*/ | |
AIR_ERROR_NO_T | |
air_port_getSmtSpdDwn( | |
const UI32_T unit, | |
const UI32_T port, | |
UI32_T *ptr_state, | |
UI32_T *ptr_time); | |
/* FUNCTION NAME: air_port_setEnable | |
* PURPOSE: | |
* Set powerdown state for a specific port. | |
* | |
* INPUT: | |
* unit -- Device ID | |
* port -- Index of port number | |
* state -- FALSE:Disable | |
* TRUE: Enable | |
* OUTPUT: | |
* None | |
* | |
* RETURN: | |
* AIR_E_OK | |
* AIR_E_BAD_PARAMETER | |
* | |
* NOTES: | |
* None | |
*/ | |
AIR_ERROR_NO_T | |
air_port_setEnable( | |
const UI32_T unit, | |
const UI32_T port, | |
const BOOL_T state); | |
/* FUNCTION NAME: air_port_getEnable | |
* PURPOSE: | |
* Get powerdown state for a specific port. | |
* | |
* INPUT: | |
* unit -- Device ID | |
* port -- Index of port number | |
* | |
* OUTPUT: | |
* ptr_state -- FALSE:Disable | |
* TRUE: Enable | |
* RETURN: | |
* AIR_E_OK | |
* AIR_E_BAD_PARAMETER | |
* | |
* NOTES: | |
* None | |
*/ | |
AIR_ERROR_NO_T | |
air_port_getEnable( | |
const UI32_T unit, | |
const UI32_T port, | |
UI32_T *ptr_state); | |
/* FUNCTION NAME: air_port_setSpTag | |
* PURPOSE: | |
* Set special tag state of a specific port. | |
* | |
* INPUT: | |
* unit -- Device ID | |
* port -- Index of port number | |
* sptag_en -- TRUE: Enable special tag | |
* FALSE: Disable special tag | |
* OUTPUT: | |
* None | |
* | |
* RETURN: | |
* AIR_E_OK | |
* AIR_E_BAD_PARAMETER | |
* | |
* NOTES: | |
* None | |
*/ | |
AIR_ERROR_NO_T | |
air_port_setSpTag( | |
const UI32_T unit, | |
const UI32_T port, | |
const BOOL_T sptag_en); | |
/* FUNCTION NAME: air_port_getSpTag | |
* PURPOSE: | |
* Get special tag state of a specific port. | |
* | |
* INPUT: | |
* unit -- Device ID | |
* port -- Index of port number | |
* OUTPUT: | |
* ptr_sptag_en -- TRUE: Special tag enable | |
* FALSE: Special tag disable | |
* | |
* RETURN: | |
* AIR_E_OK | |
* AIR_E_BAD_PARAMETER | |
* | |
* NOTES: | |
* None | |
*/ | |
AIR_ERROR_NO_T | |
air_port_getSpTag( | |
const UI32_T unit, | |
const UI32_T port, | |
BOOL_T *ptr_sptag_en); | |
/* FUNCTION NAME: air_port_set5GBaseRModeEnable | |
* PURPOSE: | |
* Set the port5 5GBase-R mode enable | |
* | |
* INPUT: | |
* unit -- Device ID | |
* | |
* OUTPUT: | |
* None | |
* | |
* RETURN: | |
* AIR_E_OK | |
* AIR_E_BAD_PARAMETER | |
* | |
* NOTES: | |
* None | |
*/ | |
AIR_ERROR_NO_T | |
air_port_set5GBaseRModeEn( | |
const UI32_T unit); | |
/* FUNCTION NAME: air_port_setHsgmiiModeEnable | |
* PURPOSE: | |
* Set the port5 HSGMII mode enable | |
* | |
* INPUT: | |
* unit -- Device ID | |
* | |
* OUTPUT: | |
* None | |
* | |
* RETURN: | |
* AIR_E_OK | |
* AIR_E_BAD_PARAMETER | |
* | |
* NOTES: | |
* None | |
*/ | |
AIR_ERROR_NO_T | |
air_port_setHsgmiiModeEn( | |
const UI32_T unit); | |
/* FUNCTION NAME: air_port_setSgmiiMode | |
* PURPOSE: | |
* Set the port5 SGMII mode for AN or force | |
* | |
* INPUT: | |
* unit -- Device ID | |
* mode -- AIR_PORT_SGMII_MODE_AN | |
* AIR_PORT_SGMII_MODE_FORCE | |
* speed -- AIR_PORT_SPEED_10M: 10Mbps | |
* AIR_PORT_SPEED_100M: 100Mbps | |
* AIR_PORT_SPEED_1000M: 1Gbps | |
* | |
* OUTPUT: | |
* None | |
* | |
* RETURN: | |
* AIR_E_OK | |
* AIR_E_BAD_PARAMETER | |
* | |
* NOTES: | |
* None | |
*/ | |
AIR_ERROR_NO_T | |
air_port_setSgmiiMode( | |
const UI32_T unit, | |
const UI32_T mode, | |
const UI32_T speed); | |
/* FUNCTION NAME: air_port_setRmiiMode | |
* PURPOSE: | |
* Set the port5 RMII mode for 100Mbps or 10Mbps | |
* | |
* INPUT: | |
* unit -- Device ID | |
* speed -- AIR_PORT_SPEED_10M: 10Mbps | |
* AIR_PORT_SPEED_100M: 100Mbps | |
* | |
* OUTPUT: | |
* None | |
* | |
* RETURN: | |
* AIR_E_OK | |
* AIR_E_BAD_PARAMETER | |
* | |
* NOTES: | |
* None | |
*/ | |
AIR_ERROR_NO_T | |
air_port_setRmiiMode( | |
const UI32_T unit, | |
const UI32_T speed); | |
/* FUNCTION NAME: air_port_setRgmiiMode | |
* PURPOSE: | |
* Set the port5 RGMII mode for 1Gbps or 100Mbps or 10Mbps | |
* | |
* INPUT: | |
* unit -- Device ID | |
* speed -- AIR_PORT_SPEED_10M: 10Mbps | |
* AIR_PORT_SPEED_100M: 100Mbps | |
* AIR_PORT_SPEED_1000M: 1Gbps | |
* | |
* OUTPUT: | |
* None | |
* | |
* RETURN: | |
* AIR_E_OK | |
* AIR_E_BAD_PARAMETER | |
* | |
* NOTES: | |
* None | |
*/ | |
AIR_ERROR_NO_T | |
air_port_setRgmiiMode( | |
const UI32_T unit, | |
const UI32_T speed); | |
#endif /* AIR_PORT_H */ | |