blob: 778e91f51a2fb77f341c23b307c37c28ea0e268f [file] [log] [blame]
From 615fa2bf42b12776d01445f009f766d3c35dabf7 Mon Sep 17 00:00:00 2001
From: "fancy.liu" <fancy.liu@mediatek.com>
Date: Tue, 14 Nov 2023 10:13:24 +0800
Subject: [PATCH 015/116] mtk: wifi: mt76: mt7996: ACS channel time too long on
duty channel
Step and issue:
1. Set channel to 36 in hostapd config;
2. Bootup;
3. Enable ACS through UCI command and reload;
4. Check hostapd log, channel 36 channel_time is much longer than other channels.
Root cause:
The reset chan_stat condition missed duty channel.
Solution:
When scan start, need to reset chan_stat in each channel switch.
CR-Id: WCNCR00351054
Signed-off-by: fancy.liu <fancy.liu@mediatek.com>
Issue:
There's a chance that the channel time for duty channel is zero in ACS
scan.
Root cause:
The chan_stat may be reset when restore to duty channel.
Mac80211 will notify to hostapd when scan done and then restore to duty
channel.
And mt76 will clear scan flag after restore done.
If hostapd get the chan_stat before channel_restore, will get the
correct channel time;
If hostapd get the chan_stat after channel_restore, will get zero
channel time;
Solution:
When channel switch, will check the mac80211 scan state but not the mt76 scan flag.
Mac80211 scan state will be set in scanning, and will be reset after
scan done and before restore to duty channel.
CR-Id: WCNCR00357653
Signed-off-by: fancy.liu <fancy.liu@mediatek.com>
---
mac80211.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/mac80211.c b/mac80211.c
index 64307b967..993e155b9 100644
--- a/mac80211.c
+++ b/mac80211.c
@@ -927,6 +927,7 @@ void mt76_set_channel(struct mt76_phy *phy)
struct cfg80211_chan_def *chandef = &hw->conf.chandef;
bool offchannel = hw->conf.flags & IEEE80211_CONF_OFFCHANNEL;
int timeout = HZ / 5;
+ unsigned long was_scanning = ieee80211_get_scanning(hw);
wait_event_timeout(dev->tx_wait, !mt76_has_tx_pending(phy), timeout);
mt76_update_survey(phy);
@@ -941,7 +942,7 @@ void mt76_set_channel(struct mt76_phy *phy)
if (!offchannel)
phy->main_chan = chandef->chan;
- if (chandef->chan != phy->main_chan)
+ if (chandef->chan != phy->main_chan || was_scanning)
memset(phy->chan_state, 0, sizeof(*phy->chan_state));
}
EXPORT_SYMBOL_GPL(mt76_set_channel);
--
2.39.2