| /* |
| * switch_fun.c: switch function sets |
| */ |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <unistd.h> |
| #include <string.h> |
| #include <stdbool.h> |
| #include <sys/ioctl.h> |
| #include <sys/socket.h> |
| #include <linux/if.h> |
| #include <stdbool.h> |
| #include <time.h> |
| #include <errno.h> |
| |
| #include "switch_extend.h" |
| #include "switch_netlink.h" |
| #include "switch_ioctl.h" |
| #include "switch_fun.h" |
| |
| #define leaky_bucket 0 |
| |
| struct switch_func_s mt753x_switch_func = { |
| .pf_table_dump = table_dump, |
| .pf_table_clear = table_clear, |
| .pf_switch_reset = switch_reset, |
| .pf_doArlAging = doArlAging, |
| .pf_read_mib_counters = read_mib_counters, |
| .pf_clear_mib_counters = clear_mib_counters, |
| .pf_read_output_queue_counters = read_output_queue_counters, |
| .pf_read_free_page_counters = read_free_page_counters, |
| .pf_rate_control = rate_control, |
| .pf_igress_rate_set = ingress_rate_set, |
| .pf_egress_rate_set = egress_rate_set, |
| .pf_table_add = table_add, |
| .pf_table_del_fid = table_del_fid, |
| .pf_table_del_vid = table_del_vid, |
| .pf_table_search_mac_fid = table_search_mac_fid, |
| .pf_table_search_mac_vid = table_search_mac_vid, |
| .pf_global_set_mac_fc = global_set_mac_fc, |
| .pf_set_mac_pfc = set_mac_pfc, |
| .pf_qos_sch_select = qos_sch_select, |
| .pf_qos_set_base = qos_set_base, |
| .pf_qos_wfq_set_weight = qos_wfq_set_weight, |
| .pf_qos_set_portpri = qos_set_portpri, |
| .pf_qos_set_dscppri = qos_set_dscppri, |
| .pf_qos_pri_mapping_queue = qos_pri_mapping_queue, |
| .pf_doStp = doStp, |
| .pf_sip_dump = sip_dump, |
| .pf_sip_add = sip_add, |
| .pf_sip_del = sip_del, |
| .pf_sip_clear = sip_clear, |
| .pf_dip_dump = dip_dump, |
| .pf_dip_add = dip_add, |
| .pf_dip_del = dip_del, |
| .pf_dip_clear = dip_clear, |
| .pf_set_mirror_to = set_mirror_to, |
| .pf_set_mirror_from = set_mirror_from, |
| .pf_doMirrorEn = doMirrorEn, |
| .pf_doMirrorPortBased = doMirrorPortBased, |
| .pf_acl_dip_add = acl_dip_add, |
| .pf_acl_dip_modify = acl_dip_modify, |
| .pf_acl_dip_pppoe = acl_dip_pppoe, |
| .pf_acl_dip_trtcm = acl_dip_trtcm, |
| .pf_acl_dip_meter = acl_dip_meter, |
| .pf_acl_mac_add = acl_mac_add, |
| .pf_acl_ethertype = acl_ethertype, |
| .pf_acl_sp_add = acl_sp_add, |
| .pf_acl_l4_add = acl_l4_add, |
| .pf_acl_port_enable = acl_port_enable, |
| .pf_acl_table_add = acl_table_add, |
| .pf_acl_mask_table_add = acl_mask_table_add, |
| .pf_acl_rule_table_add = acl_rule_table_add, |
| .pf_acl_rate_table_add = acl_rate_table_add, |
| .pf_vlan_dump = vlan_dump, |
| .pf_vlan_set = vlan_set, |
| .pf_vlan_clear = vlan_clear, |
| .pf_doVlanSetVid = doVlanSetVid, |
| .pf_doVlanSetPvid = doVlanSetPvid, |
| .pf_doVlanSetAccFrm = doVlanSetAccFrm, |
| .pf_doVlanSetPortAttr = doVlanSetPortAttr, |
| .pf_doVlanSetPortMode = doVlanSetPortMode, |
| .pf_doVlanSetEgressTagPCR = doVlanSetEgressTagPCR, |
| .pf_doVlanSetEgressTagPVC = doVlanSetEgressTagPVC, |
| .pf_igmp_on = igmp_on, |
| .pf_igmp_off = igmp_off, |
| .pf_igmp_enable = igmp_enable, |
| .pf_igmp_disable = igmp_disable, |
| .pf_collision_pool_enable = collision_pool_enable, |
| .pf_collision_pool_mac_dump = collision_pool_mac_dump, |
| .pf_collision_pool_dip_dump = collision_pool_dip_dump, |
| .pf_collision_pool_sip_dump = collision_pool_sip_dump, |
| .pf_pfc_get_rx_counter = pfc_get_rx_counter, |
| .pf_pfc_get_tx_counter = pfc_get_tx_counter, |
| .pf_eee_enable = eee_enable, |
| .pf_eee_dump = eee_dump, |
| }; |
| |
| static int getnext(char *src, int separator, char *dest) |
| { |
| char *c; |
| int len; |
| |
| if ((src == NULL) || (dest == NULL)) |
| return -1; |
| |
| c = strchr(src, separator); |
| if (c == NULL) |
| return -1; |
| |
| len = c - src; |
| strncpy(dest, src, len); |
| dest[len] = '\0'; |
| return len + 1; |
| } |
| |
| static int str_to_ip(unsigned int *ip, char *str) |
| { |
| int i; |
| int len; |
| char *ptr = str; |
| char buf[128]; |
| unsigned char c[4]; |
| |
| for (i = 0; i < 3; ++i) { |
| if ((len = getnext(ptr, '.', buf)) == -1) |
| return 1; |
| c[i] = atoi(buf); |
| ptr += len; |
| } |
| c[3] = atoi(ptr); |
| *ip = (c[0] << 24) + (c[1] << 16) + (c[2] << 8) + c[3]; |
| return 0; |
| } |
| |
| /*convert IP address from number to string */ |
| static void ip_to_str(char *str, unsigned int ip) |
| { |
| unsigned char *ptr = (unsigned char *)&ip; |
| unsigned char c[4]; |
| |
| c[0] = *(ptr); |
| c[1] = *(ptr + 1); |
| c[2] = *(ptr + 2); |
| c[3] = *(ptr + 3); |
| /*sprintf(str, "%d.%d.%d.%d", c[0], c[1], c[2], c[3]); */ |
| sprintf(str, "%d.%d.%d.%d", c[3], c[2], c[1], c[0]); |
| } |
| |
| int reg_read(unsigned int offset, unsigned int *value) |
| { |
| int ret = -1; |
| |
| if (nl_init_flag == true) { |
| ret = reg_read_netlink(attres, offset, value); |
| } else { |
| if (attres->dev_id == -1) |
| ret = reg_read_ioctl(offset, value); |
| } |
| if (ret < 0) { |
| printf("Read fail\n"); |
| *value = 0; |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| int reg_write(unsigned int offset, unsigned int value) |
| { |
| int ret = -1; |
| |
| if (nl_init_flag == true) { |
| ret = reg_write_netlink(attres, offset, value); |
| } else { |
| if (attres->dev_id == -1) |
| ret = reg_write_ioctl(offset, value); |
| } |
| if (ret < 0) { |
| printf("Write fail\n"); |
| exit_free(); |
| exit(0); |
| } |
| return 0; |
| } |
| |
| int mii_mgr_read(unsigned int port_num, unsigned int reg, unsigned int *value) |
| { |
| int ret; |
| |
| if (port_num > 31) { |
| printf("Invalid Port or PHY addr \n"); |
| return -1; |
| } |
| |
| if (nl_init_flag == true) |
| ret = phy_cl22_read_netlink(attres, port_num, reg, value); |
| else |
| ret = mii_mgr_cl22_read_ioctl(port_num, reg, value); |
| |
| if (ret < 0) { |
| printf("Phy cl22 read fail\n"); |
| exit_free(); |
| exit(0); |
| } |
| |
| return 0; |
| } |
| |
| int mii_mgr_write(unsigned int port_num, unsigned int reg, unsigned int value) |
| { |
| int ret; |
| |
| if (port_num > 31) { |
| printf("Invalid Port or PHY addr \n"); |
| return -1; |
| } |
| |
| if (nl_init_flag == true) |
| ret = phy_cl22_write_netlink(attres, port_num, reg, value); |
| else |
| ret = mii_mgr_cl22_write_ioctl(port_num, reg, value); |
| |
| if (ret < 0) { |
| printf("Phy cl22 write fail\n"); |
| exit_free(); |
| exit(0); |
| } |
| |
| return 0; |
| } |
| |
| int mii_mgr_c45_read(unsigned int port_num, unsigned int dev, unsigned int reg, |
| unsigned int *value) |
| { |
| int ret; |
| |
| if (port_num > 31) { |
| printf("Invalid Port or PHY addr \n"); |
| return -1; |
| } |
| |
| if (nl_init_flag == true) |
| ret = phy_cl45_read_netlink(attres, port_num, dev, reg, value); |
| else |
| ret = mii_mgr_cl45_read_ioctl(port_num, dev, reg, value); |
| |
| if (ret < 0) { |
| printf("Phy cl45 read fail\n"); |
| exit_free(); |
| exit(0); |
| } |
| |
| return 0; |
| } |
| |
| int mii_mgr_c45_write(unsigned int port_num, unsigned int dev, unsigned int reg, |
| unsigned int value) |
| { |
| int ret; |
| |
| if (port_num > 31) { |
| printf("Invalid Port or PHY addr \n"); |
| return -1; |
| } |
| |
| if (nl_init_flag == true) |
| ret = phy_cl45_write_netlink(attres, port_num, dev, reg, value); |
| else |
| ret = mii_mgr_cl45_write_ioctl(port_num, dev, reg, value); |
| |
| if (ret < 0) { |
| printf("Phy cl45 write fail\n"); |
| exit_free(); |
| exit(0); |
| } |
| |
| return 0; |
| } |
| |
| int phy_dump(int phy_addr) |
| { |
| int ret; |
| |
| if (nl_init_flag == true) |
| ret = phy_dump_netlink(attres, phy_addr); |
| else |
| ret = phy_dump_ioctl(phy_addr); |
| |
| if (ret < 0) { |
| printf("Phy dump fail\n"); |
| exit_free(); |
| exit(0); |
| } |
| |
| return 0; |
| } |
| |
| void phy_crossover(int argc, char *argv[]) |
| { |
| unsigned int port_num = strtoul(argv[2], NULL, 10); |
| unsigned int value = 0; |
| int ret; |
| |
| if (port_num > 4) { |
| printf("invaild value, port_name:0~4\n"); |
| return; |
| } |
| |
| if (nl_init_flag == true) |
| ret = |
| phy_cl45_read_netlink(attres, port_num, 0x1E, |
| MT7530_T10_TEST_CONTROL, &value); |
| else |
| ret = |
| mii_mgr_cl45_read_ioctl(port_num, 0x1E, |
| MT7530_T10_TEST_CONTROL, &value); |
| if (ret < 0) { |
| printf("phy_cl45 read fail\n"); |
| exit_free(); |
| exit(0); |
| } |
| |
| printf("mii_mgr_cl45:"); |
| printf("Read: port#=%d, device=0x%x, reg=0x%x, value=0x%x\n", port_num, |
| 0x1E, MT7530_T10_TEST_CONTROL, value); |
| |
| if (!strncmp(argv[3], "auto", 5)) { |
| value &= (~(0x3 << 3)); |
| } else if (!strncmp(argv[3], "mdi", 4)) { |
| value &= (~(0x3 << 3)); |
| value |= (0x2 << 3); |
| } else if (!strncmp(argv[3], "mdix", 5)) { |
| value |= (0x3 << 3); |
| } else { |
| printf("invaild parameter\n"); |
| return; |
| } |
| printf("Write: port#=%d, device=0x%x, reg=0x%x. value=0x%x\n", port_num, |
| 0x1E, MT7530_T10_TEST_CONTROL, value); |
| |
| if (nl_init_flag == true) |
| ret = |
| phy_cl45_write_netlink(attres, port_num, 0x1E, |
| MT7530_T10_TEST_CONTROL, value); |
| else |
| ret = |
| mii_mgr_cl45_write_ioctl(port_num, 0x1E, |
| MT7530_T10_TEST_CONTROL, value); |
| |
| if (ret < 0) { |
| printf("phy_cl45 write fail\n"); |
| exit_free(); |
| exit(0); |
| } |
| } |
| |
| int rw_phy_token_ring(int argc, char *argv[]) |
| { |
| int ch_addr, node_addr, data_addr; |
| unsigned int tr_reg_control; |
| unsigned int val_l = 0; |
| unsigned int val_h = 0; |
| unsigned int port_num; |
| |
| if (argc < 4) |
| return -1; |
| |
| if (argv[2][0] == 'r') { |
| if (argc != 7) |
| return -1; |
| mii_mgr_write(0, 0x1f, 0x52b5); // r31 = 0x52b5 |
| port_num = strtoul(argv[3], NULL, 0); |
| if (port_num > MAX_PORT) { |
| printf("Illegal port index and port:0~6\n"); |
| return -1; |
| } |
| ch_addr = strtoul(argv[4], NULL, 0); |
| node_addr = strtoul(argv[5], NULL, 0); |
| data_addr = strtoul(argv[6], NULL, 0); |
| printf("port = %x, ch_addr = %x, node_addr=%x, data_addr=%x\n", |
| port_num, ch_addr, node_addr, data_addr); |
| tr_reg_control = |
| (1 << 15) | (1 << 13) | (ch_addr << 11) | (node_addr << 7) | |
| (data_addr << 1); |
| mii_mgr_write(port_num, 16, tr_reg_control); // r16 = tr_reg_control |
| mii_mgr_read(port_num, 17, &val_l); |
| mii_mgr_read(port_num, 18, &val_h); |
| printf |
| ("switch trreg read tr_reg_control=%x, value_H=%x, value_L=%x\n", |
| tr_reg_control, val_h, val_l); |
| } else if (argv[2][0] == 'w') { |
| if (argc != 9) |
| return -1; |
| mii_mgr_write(0, 0x1f, 0x52b5); // r31 = 0x52b5 |
| port_num = strtoul(argv[3], NULL, 0); |
| if (port_num > MAX_PORT) { |
| printf("\n**Illegal port index and port:0~6\n"); |
| return -1; |
| } |
| ch_addr = strtoul(argv[4], NULL, 0); |
| node_addr = strtoul(argv[5], NULL, 0); |
| data_addr = strtoul(argv[6], NULL, 0); |
| val_h = strtoul(argv[7], NULL, 0); |
| val_l = strtoul(argv[8], NULL, 0); |
| printf("port = %x, ch_addr = %x, node_addr=%x, data_addr=%x\n", |
| port_num, ch_addr, node_addr, data_addr); |
| tr_reg_control = |
| (1 << 15) | (0 << 13) | (ch_addr << 11) | (node_addr << 7) | |
| (data_addr << 1); |
| mii_mgr_write(port_num, 17, val_l); |
| mii_mgr_write(port_num, 18, val_h); |
| mii_mgr_write(port_num, 16, tr_reg_control); // r16 = tr_reg_control |
| printf |
| ("switch trreg Write tr_reg_control=%x, value_H=%x, value_L=%x\n", |
| tr_reg_control, val_h, val_l); |
| } else |
| return -1; |
| return 0; |
| } |
| |
| void write_acl_table(unsigned char tbl_idx, unsigned int vawd1, |
| unsigned int vawd2) |
| { |
| unsigned int value = 0, reg = 0; |
| unsigned int max_index; |
| |
| if (chip_name == 0x7531 || chip_name == 0x7988) |
| max_index = 256; |
| else |
| max_index = 64; |
| |
| printf("Pattern_acl_tbl_idx:%d\n", tbl_idx); |
| |
| if (tbl_idx >= max_index) { |
| printf(HELP_ACL_ACL_TBL_ADD); |
| return; |
| } |
| |
| reg = REG_VTCR_ADDR; |
| while (1) { // wait until not busy |
| reg_read(reg, &value); |
| if ((value & REG_VTCR_BUSY_MASK) == 0) { |
| break; |
| } |
| } |
| reg_write(REG_VAWD1_ADDR, vawd1); |
| printf("write reg: %x, value: %x\n", REG_VAWD1_ADDR, vawd1); |
| reg_write(REG_VAWD2_ADDR, vawd2); |
| printf("write reg: %x, value: %x\n", REG_VAWD2_ADDR, vawd2); |
| reg = REG_VTCR_ADDR; |
| value = REG_VTCR_BUSY_MASK | (0x05 << REG_VTCR_FUNC_OFFT) | tbl_idx; |
| reg_write(reg, value); |
| printf("write reg: %x, value: %x\n", reg, value); |
| |
| while (1) { // wait until not busy |
| reg_read(reg, &value); |
| if ((value & REG_VTCR_BUSY_MASK) == 0) |
| break; |
| } |
| } |
| |
| void acl_table_add(int argc, char *argv[]) |
| { |
| unsigned int vawd1 = 0, vawd2 = 0; |
| unsigned char tbl_idx = 0; |
| |
| tbl_idx = atoi(argv[3]); |
| vawd1 = strtoul(argv[4], (char **)NULL, 16); |
| vawd2 = strtoul(argv[5], (char **)NULL, 16); |
| write_acl_table(tbl_idx, vawd1, vawd2); |
| } |
| |
| void write_acl_mask_table(unsigned char tbl_idx, unsigned int vawd1, |
| unsigned int vawd2) |
| { |
| unsigned int value = 0, reg = 0; |
| unsigned int max_index = 0; |
| |
| if (chip_name == 0x7531 || chip_name == 0x7988) |
| max_index = 128; |
| else |
| max_index = 32; |
| |
| printf("Rule_mask_tbl_idx:%d\n", tbl_idx); |
| |
| if (tbl_idx >= max_index) { |
| printf(HELP_ACL_MASK_TBL_ADD); |
| return; |
| } |
| reg = REG_VTCR_ADDR; |
| while (1) { // wait until not busy |
| reg_read(reg, &value); |
| if ((value & REG_VTCR_BUSY_MASK) == 0) |
| break; |
| } |
| reg_write(REG_VAWD1_ADDR, vawd1); |
| printf("write reg: %x, value: %x\n", REG_VAWD1_ADDR, vawd1); |
| reg_write(REG_VAWD2_ADDR, vawd2); |
| printf("write reg: %x, value: %x\n", REG_VAWD2_ADDR, vawd2); |
| reg = REG_VTCR_ADDR; |
| value = REG_VTCR_BUSY_MASK | (0x09 << REG_VTCR_FUNC_OFFT) | tbl_idx; |
| reg_write(reg, value); |
| printf("write reg: %x, value: %x\n", reg, value); |
| while (1) { // wait until not busy |
| reg_read(reg, &value); |
| if ((value & REG_VTCR_BUSY_MASK) == 0) |
| break; |
| } |
| } |
| |
| void acl_mask_table_add(int argc, char *argv[]) |
| { |
| unsigned int vawd1 = 0, vawd2 = 0; |
| unsigned char tbl_idx = 0; |
| |
| tbl_idx = atoi(argv[3]); |
| vawd1 = strtoul(argv[4], (char **)NULL, 16); |
| vawd2 = strtoul(argv[5], (char **)NULL, 16); |
| write_acl_mask_table(tbl_idx, vawd1, vawd2); |
| } |
| |
| void write_acl_rule_table(unsigned char tbl_idx, unsigned int vawd1, |
| unsigned int vawd2) |
| { |
| unsigned int value = 0, reg = 0; |
| unsigned int max_index = 0; |
| |
| if (chip_name == 0x7531 || chip_name == 0x7988) |
| max_index = 128; |
| else |
| max_index = 32; |
| |
| printf("Rule_control_tbl_idx:%d\n", tbl_idx); |
| |
| if (tbl_idx >= max_index) { /* Check the input parameters is right or not. */ |
| printf(HELP_ACL_RULE_TBL_ADD); |
| return; |
| } |
| reg = REG_VTCR_ADDR; |
| |
| while (1) { // wait until not busy |
| reg_read(reg, &value); |
| if ((value & REG_VTCR_BUSY_MASK) == 0) { |
| break; |
| } |
| } |
| reg_write(REG_VAWD1_ADDR, vawd1); |
| printf("write reg: %x, value: %x\n", REG_VAWD1_ADDR, vawd1); |
| reg_write(REG_VAWD2_ADDR, vawd2); |
| printf("write reg: %x, value: %x\n", REG_VAWD2_ADDR, vawd2); |
| reg = REG_VTCR_ADDR; |
| value = REG_VTCR_BUSY_MASK | (0x0B << REG_VTCR_FUNC_OFFT) | tbl_idx; |
| reg_write(reg, value); |
| printf("write reg: %x, value: %x\n", reg, value); |
| |
| while (1) { // wait until not busy |
| reg_read(reg, &value); |
| if ((value & REG_VTCR_BUSY_MASK) == 0) { |
| break; |
| } |
| } |
| } |
| |
| void acl_rule_table_add(int argc, char *argv[]) |
| { |
| unsigned int vawd1 = 0, vawd2 = 0; |
| unsigned char tbl_idx = 0; |
| |
| tbl_idx = atoi(argv[3]); |
| vawd1 = strtoul(argv[4], (char **)NULL, 16); |
| vawd2 = strtoul(argv[5], (char **)NULL, 16); |
| write_acl_rule_table(tbl_idx, vawd1, vawd2); |
| } |
| |
| void write_rate_table(unsigned char tbl_idx, unsigned int vawd1, |
| unsigned int vawd2) |
| { |
| unsigned int value = 0, reg = 0; |
| unsigned int max_index = 32; |
| |
| printf("Rule_action_tbl_idx:%d\n", tbl_idx); |
| |
| if (tbl_idx >= max_index) { |
| printf(HELP_ACL_RATE_TBL_ADD); |
| return; |
| } |
| |
| reg = REG_VTCR_ADDR; |
| while (1) { // wait until not busy |
| reg_read(reg, &value); |
| if ((value & REG_VTCR_BUSY_MASK) == 0) |
| break; |
| } |
| |
| reg_write(REG_VAWD1_ADDR, vawd1); |
| printf("write reg: %x, value: %x\n", REG_VAWD1_ADDR, vawd1); |
| reg_write(REG_VAWD2_ADDR, vawd2); |
| printf("write reg: %x, value: %x\n", REG_VAWD2_ADDR, vawd2); |
| reg = REG_VTCR_ADDR; |
| value = REG_VTCR_BUSY_MASK | (0x0D << REG_VTCR_FUNC_OFFT) | tbl_idx; |
| reg_write(reg, value); |
| printf("write reg: %x, value: %x\n", reg, value); |
| |
| while (1) { // wait until not busy |
| reg_read(reg, &value); |
| if ((value & REG_VTCR_BUSY_MASK) == 0) |
| break; |
| } |
| } |
| |
| void acl_rate_table_add(int argc, char *argv[]) |
| { |
| unsigned int vawd1 = 0, vawd2 = 0; |
| unsigned char tbl_idx = 0; |
| |
| tbl_idx = atoi(argv[3]); |
| vawd1 = strtoul(argv[4], (char **)NULL, 16); |
| vawd2 = strtoul(argv[5], (char **)NULL, 16); |
| |
| write_rate_table(tbl_idx, vawd1, vawd2); |
| } |
| |
| void write_trTCM_table(unsigned char tbl_idx, unsigned int vawd1, |
| unsigned int vawd2) |
| { |
| unsigned int value = 0, reg = 0; |
| unsigned int max_index = 32; |
| |
| printf("trTCM_tbl_idx:%d\n", tbl_idx); |
| |
| if (tbl_idx >= max_index) { |
| printf(HELP_ACL_TRTCM_TBL_ADD); |
| return; |
| } |
| |
| reg = REG_VTCR_ADDR; |
| while (1) { // wait until not busy |
| reg_read(reg, &value); |
| if ((value & REG_VTCR_BUSY_MASK) == 0) |
| break; |
| } |
| |
| reg_write(REG_VAWD1_ADDR, vawd1); |
| printf("write reg: %x, value: %x\n", REG_VAWD1_ADDR, vawd1); |
| reg_write(REG_VAWD2_ADDR, vawd2); |
| printf("write reg: %x, value: %x\n", REG_VAWD2_ADDR, vawd2); |
| reg = REG_VTCR_ADDR; |
| value = REG_VTCR_BUSY_MASK | (0x07 << REG_VTCR_FUNC_OFFT) | tbl_idx; |
| reg_write(reg, value); |
| printf("write reg: %x, value: %x\n", reg, value); |
| |
| while (1) { // wait until not busy |
| reg_read(reg, &value); |
| if ((value & REG_VTCR_BUSY_MASK) == 0) |
| break; |
| } |
| } |
| |
| int acl_parameters_pre_del(int len1, int len2, int argc, char *argv[], |
| int *port) |
| { |
| int i = 0; |
| |
| *port = 0; |
| if (argc < len1) { |
| printf("insufficient arguments!\n"); |
| return -1; |
| } |
| |
| if (len2 == 12) { |
| if (!argv[4] || strlen(argv[4]) != len2) { |
| printf |
| ("The [%s] format error, should be of length %d\n", |
| argv[4], len2); |
| return -1; |
| } |
| } |
| |
| if (!argv[5] || strlen(argv[5]) != 8) { |
| printf("portsmap format error, should be of length 7\n"); |
| return -1; |
| } |
| |
| for (i = 0; i < 7; i++) { |
| if (argv[5][i] != '0' && argv[5][i] != '1') { |
| printf |
| ("portmap format error, should be of combination of 0 or 1\n"); |
| return -1; |
| } |
| *port += (argv[5][i] - '0') * (1 << i); |
| } |
| return 0; |
| } |
| |
| void acl_compare_pattern(int ports, int comparion, int base, int word, |
| unsigned char table_index) |
| { |
| unsigned int value = 0; |
| |
| comparion |= 0xffff0000; //compare mask |
| |
| value = ports << 8; //w_port_map |
| value |= 0x1 << 19; //enable |
| value |= base << 16; //mac header |
| value |= word << 1; //word offset |
| |
| write_acl_table(table_index, comparion, value); |
| } |
| |
| void acl_mac_add(int argc, char *argv[]) |
| { |
| unsigned int value = 0; |
| int ports = 0; |
| char tmpstr[5]; |
| int ret; |
| |
| ret = acl_parameters_pre_del(6, 12, argc, argv, &ports); |
| if (ret < 0) |
| return; |
| /* Set pattern */ |
| strncpy(tmpstr, argv[4], 4); |
| tmpstr[4] = '\0'; |
| value = strtoul(tmpstr, NULL, 16); |
| acl_compare_pattern(ports, value, 0x0, 0, 0); |
| |
| strncpy(tmpstr, argv[4] + 4, 4); |
| tmpstr[4] = '\0'; |
| value = strtoul(tmpstr, NULL, 16); |
| acl_compare_pattern(ports, value, 0x0, 1, 1); |
| |
| strncpy(tmpstr, argv[4] + 8, 4); |
| tmpstr[4] = '\0'; |
| value = strtoul(tmpstr, NULL, 16); |
| acl_compare_pattern(ports, value, 0x0, 2, 2); |
| |
| //set mask |
| write_acl_mask_table(0, 0x7, 0); |
| |
| //set action |
| value = 0x7; //drop |
| value |= 1 << 28; //acl intterupt enable |
| value |= 1 << 27; //acl hit count |
| value |= 2 << 24; //acl hit count group index (0~3) |
| write_acl_rule_table(0, value, 0); |
| } |
| |
| void acl_dip_meter(int argc, char *argv[]) |
| { |
| unsigned int value = 0, ip_value = 0, meter = 0; |
| int ports = 0; |
| int ret; |
| |
| ip_value = 0; |
| ret = acl_parameters_pre_del(7, -1, argc, argv, &ports); |
| if (ret < 0) |
| return; |
| |
| str_to_ip(&ip_value, argv[4]); |
| //set pattern |
| value = (ip_value >> 16); |
| acl_compare_pattern(ports, value, 0x2, 0x8, 0); |
| |
| //set pattern |
| value = (ip_value & 0xffff); |
| acl_compare_pattern(ports, value, 0x2, 0x9, 1); |
| |
| //set mask |
| write_acl_mask_table(0, 0x3, 0); |
| |
| //set action |
| meter = strtoul(argv[6], NULL, 0); |
| if (((chip_name == 0x7530) && (meter > 1000000)) || |
| ((chip_name == 0x7531) && (meter > 2500000)) || |
| ((chip_name == 0x7988) && (meter > 4000000))) { |
| printf("\n**Illegal meter input, and 7530: 0~1000000Kpbs, 7531: 0~2500000Kpbs, 7988: 0~4000000Kpbs**\n"); |
| return; |
| } |
| if (((chip_name == 0x7531 || chip_name == 0x7988) && (meter > 1000000))) { |
| reg_read(0xc, &value); |
| value |= 0x1 << 30; |
| reg_write(0xC, value); |
| printf("AGC: 0x%x\n", value); |
| value = meter / 1000; //uint is 1Mbps |
| } else { |
| reg_read(0xc, &value); |
| value &= ~(0x1 << 30); |
| reg_write(0xC, value); |
| printf("AGC: 0x%x\n", value); |
| value = meter >> 6; //uint is 64Kbps |
| } |
| value |= 0x1 << 15; //enable rate control |
| printf("Acl rate control:0x%x\n", value); |
| write_rate_table(0, value, 0); |
| } |
| |
| void acl_dip_trtcm(int argc, char *argv[]) |
| { |
| unsigned int value, value2, ip_value; |
| unsigned int CIR, CBS, PIR, PBS; |
| int ports; |
| int ret; |
| |
| ip_value = 0; |
| ret = acl_parameters_pre_del(10, -1, argc, argv, &ports); |
| if (ret < 0) |
| return; |
| |
| str_to_ip(&ip_value, argv[4]); |
| //set pattern |
| value = (ip_value >> 16); |
| acl_compare_pattern(ports, value, 0x2, 0x8, 0); |
| |
| //set pattern |
| value = (ip_value & 0xffff); |
| acl_compare_pattern(ports, value, 0x2, 0x9, 1); |
| |
| //set CBS PBS |
| CIR = strtoul(argv[6], NULL, 0); |
| CBS = strtoul(argv[7], NULL, 0); |
| PIR = strtoul(argv[8], NULL, 0); |
| PBS = strtoul(argv[9], NULL, 0); |
| |
| if (CIR > 65535 * 64 || CBS > 65535 || PIR > 65535 * 64 || PBS > 65535) { |
| printf("\n**Illegal input parameters**\n"); |
| return; |
| } |
| |
| value = CBS << 16; //bit16~31 |
| value |= PBS; //bit0~15 |
| //value |= 1;//valid |
| CIR = CIR >> 6; |
| PIR = PIR >> 6; |
| |
| value2 = CIR << 16; //bit16~31 |
| value2 |= PIR; //bit0~15 |
| write_trTCM_table(0, value, value2); |
| |
| //set pattern |
| write_acl_mask_table(0, 0x3, 0); |
| |
| //set action |
| value = 0x1 << (11 + 1); //TrTCM green meter#0 Low drop |
| value |= 0x2 << (8 + 1); //TrTCM yellow meter#0 Med drop |
| value |= 0x3 << (5 + 1); //TrTCM red meter#0 Hig drop |
| value |= 0x1 << 0; //TrTCM drop pcd select |
| write_acl_rule_table(0, 0, value); |
| } |
| |
| void acl_ethertype(int argc, char *argv[]) |
| { |
| unsigned int value, ethertype; |
| int ports; |
| int ret; |
| |
| ret = acl_parameters_pre_del(6, -1, argc, argv, &ports); |
| if (ret < 0) |
| return; |
| printf("ports:0x%x\n", ports); |
| ethertype = strtoul(argv[4], NULL, 16); |
| //set pattern |
| value = ethertype; |
| acl_compare_pattern(ports, value, 0x0, 0x6, 0); |
| |
| //set pattern |
| write_acl_mask_table(0, 0x1, 0); |
| |
| //set action(drop) |
| value = 0x7; //default. Nodrop |
| value |= 1 << 28; //acl intterupt enable |
| value |= 1 << 27; //acl hit count |
| |
| write_acl_rule_table(0, value, 0); |
| } |
| |
| void acl_dip_modify(int argc, char *argv[]) |
| { |
| unsigned int value, ip_value; |
| int ports; |
| int priority; |
| int ret; |
| |
| ip_value = 0; |
| priority = strtoul(argv[6], NULL, 16); |
| if (priority < 0 || priority > 7) { |
| printf("\n**Illegal priority value!**\n"); |
| return; |
| } |
| |
| ret = acl_parameters_pre_del(6, -1, argc, argv, &ports); |
| if (ret < 0) |
| return; |
| |
| str_to_ip(&ip_value, argv[4]); |
| //set pattern |
| value = (ip_value >> 16); |
| acl_compare_pattern(ports, value, 0x2, 0x8, 0); |
| |
| //set pattern |
| value = (ip_value & 0xffff); |
| acl_compare_pattern(ports, value, 0x2, 0x9, 1); |
| |
| //set pattern |
| write_acl_mask_table(0, 0x3, 0); |
| |
| //set action |
| value = 0x0; //default. Nodrop |
| value |= 1 << 28; //acl intterupt enable |
| value |= 1 << 27; //acl hit count |
| value |= priority << 4; //acl UP |
| write_acl_rule_table(0, value, 0); |
| } |
| |
| void acl_dip_pppoe(int argc, char *argv[]) |
| { |
| unsigned int value, ip_value; |
| int ports; |
| int ret; |
| |
| ip_value = 0; |
| ret = acl_parameters_pre_del(6, -1, argc, argv, &ports); |
| if (ret < 0) |
| return; |
| |
| str_to_ip(&ip_value, argv[4]); |
| //set pattern |
| value = (ip_value >> 16); |
| acl_compare_pattern(ports, value, 0x2, 0x8, 0); |
| |
| //set pattern |
| value = (ip_value & 0xffff); |
| acl_compare_pattern(ports, value, 0x2, 0x9, 1); |
| |
| //set pattern |
| write_acl_mask_table(0, 0x3, 0); |
| |
| //set action |
| value = 0x0; //default. Nodrop |
| value |= 1 << 28; //acl intterupt enable |
| value |= 1 << 27; //acl hit count |
| value |= 1 << 20; //pppoe header remove |
| value |= 1 << 21; //SA MAC SWAP |
| value |= 1 << 22; //DA MAC SWAP |
| write_acl_rule_table(0, value, 7); |
| } |
| |
| void acl_dip_add(int argc, char *argv[]) |
| { |
| unsigned int value, ip_value; |
| int ports; |
| int ret; |
| |
| ip_value = 0; |
| ret = acl_parameters_pre_del(6, -1, argc, argv, &ports); |
| if (ret < 0) |
| return; |
| |
| str_to_ip(&ip_value, argv[4]); |
| //set pattern |
| value = (ip_value >> 16); |
| acl_compare_pattern(ports, value, 0x2, 0x8, 0); |
| |
| //set pattern |
| value = (ip_value & 0xffff); |
| acl_compare_pattern(ports, value, 0x2, 0x9, 1); |
| |
| //set pattern |
| write_acl_mask_table(0, 0x3, 0); |
| |
| //set action |
| //value = 0x0; //default |
| value = 0x7; //drop |
| value |= 1 << 28; //acl intterupt enable |
| value |= 1 << 27; //acl hit count |
| value |= 2 << 24; //acl hit count group index (0~3) |
| write_acl_rule_table(0, value, 0); |
| } |
| |
| void acl_l4_add(int argc, char *argv[]) |
| { |
| unsigned int value = 0; |
| int ports; |
| int ret; |
| |
| ret = acl_parameters_pre_del(6, -1, argc, argv, &ports); |
| if (ret < 0) |
| return; |
| |
| //set pattern |
| value = strtoul(argv[4], NULL, 16); |
| acl_compare_pattern(ports, value, 0x5, 0x0, 0); |
| |
| //set rue mask |
| write_acl_mask_table(0, 0x1, 0); |
| //set action |
| value = 0x7; //drop |
| //value |= 1;//valid |
| write_acl_rule_table(0, value, 0); |
| } |
| |
| void acl_sp_add(int argc, char *argv[]) |
| { |
| unsigned int value = 0; |
| int ports; |
| int ret; |
| |
| ret = acl_parameters_pre_del(6, -1, argc, argv, &ports); |
| if (ret < 0) |
| return; |
| //set pattern |
| value = strtoul(argv[4], NULL, 0); |
| acl_compare_pattern(ports, value, 0x4, 0x0, 0); |
| |
| //set rue mask |
| write_acl_mask_table(0, 0x1, 0); |
| |
| //set action |
| value = 0x7; //drop |
| //value |= 1;//valid |
| write_acl_rule_table(0, value, 0); |
| } |
| |
| void acl_port_enable(int argc, char *argv[]) |
| { |
| unsigned int value = 0, reg = 0; |
| unsigned char acl_port = 0, acl_en = 0; |
| |
| acl_port = atoi(argv[3]); |
| acl_en = atoi(argv[4]); |
| |
| printf("acl_port:%d, acl_en:%d\n", acl_port, acl_en); |
| |
| /*Check the input parameters is right or not. */ |
| if ((acl_port > SWITCH_MAX_PORT) || (acl_en > 1)) { |
| printf(HELP_ACL_SETPORTEN); |
| return; |
| } |
| |
| reg = REG_PCR_P0_ADDR + (0x100 * acl_port); // 0x2004[10] |
| reg_read(reg, &value); |
| value &= (~REG_PORT_ACL_EN_MASK); |
| value |= (acl_en << REG_PORT_ACL_EN_OFFT); |
| |
| printf("write reg: %x, value: %x\n", reg, value); |
| reg_write(reg, value); |
| } |
| |
| static void dip_dump_internal(int type) |
| { |
| unsigned int i, j, value, mac, mac2, value2; |
| char tmpstr[16] = { 0 }; |
| int table_size = 0; |
| int hit_value1 = 0; |
| int hit_value2 = 0; |
| |
| if (type == GENERAL_TABLE) { |
| table_size = 0x800; |
| reg_write(REG_ATC_ADDR, 0x8104); //dip search command |
| } else { |
| table_size = 0x40; |
| reg_write(REG_ATC_ADDR, 0x811c); //dip search command |
| } |
| printf |
| ("hash port(0:6) rsp_cnt flag timer dip-address ATRD\n"); |
| for (i = 0; i < table_size; i++) { |
| while (1) { |
| reg_read(REG_ATC_ADDR, &value); |
| if (type == GENERAL_TABLE) { |
| hit_value1 = value & (0x1 << 13); |
| hit_value2 = 1; |
| } else { |
| hit_value1 = value & (0x1 << 13); |
| hit_value2 = value & (0x1 << 28); |
| } |
| |
| if (hit_value1 && hit_value2) { //search_rdy |
| reg_read(REG_ATRD_ADDR, &value2); |
| //printf("REG_ATRD_ADDR=0x%x\n\r",value2); |
| |
| printf("%03x: ", (value >> 16) & 0xfff); //hash_addr_lu |
| j = (value2 >> 4) & 0xff; //r_port_map |
| printf("%c", (j & 0x01) ? '1' : '-'); |
| printf("%c", (j & 0x02) ? '1' : '-'); |
| printf("%c", (j & 0x04) ? '1' : '-'); |
| printf("%c ", (j & 0x08) ? '1' : '-'); |
| printf("%c", (j & 0x10) ? '1' : '-'); |
| printf("%c", (j & 0x20) ? '1' : '-'); |
| printf("%c", (j & 0x40) ? '1' : '-'); |
| |
| reg_read(REG_TSRA2_ADDR, &mac2); |
| |
| printf(" 0x%4x", (mac2 & 0xffff)); //RESP_CNT |
| printf(" 0x%2x", ((mac2 >> 16) & 0xff)); //RESP_FLAG |
| printf(" %3d", ((mac2 >> 24) & 0xff)); //RESP_TIMER |
| //printf(" %4d", (value2 >> 24) & 0xff); //r_age_field |
| reg_read(REG_TSRA1_ADDR, &mac); |
| ip_to_str(tmpstr, mac); |
| printf(" %s", tmpstr); |
| printf(" 0x%8x\n", value2); //ATRD |
| //printf("%04x", ((mac2 >> 16) & 0xffff)); |
| //printf(" %c\n", (((value2 >> 20) & 0x03)== 0x03)? 'y':'-'); |
| if (value & 0x4000) { |
| printf("end of table %d\n", i); |
| return; |
| } |
| break; |
| } else if (value & 0x4000) { //at_table_end |
| printf("found the last entry %d (not ready)\n", |
| i); |
| return; |
| } |
| usleep(5000); |
| } |
| |
| if (type == GENERAL_TABLE) |
| reg_write(REG_ATC_ADDR, 0x8105); //search for next dip address |
| else |
| reg_write(REG_ATC_ADDR, 0x811d); //search for next dip address |
| usleep(5000); |
| } |
| } |
| |
| void dip_dump(int argc, char *argv[]) |
| { |
| dip_dump_internal(GENERAL_TABLE); |
| |
| } |
| |
| void dip_add(int argc, char *argv[]) |
| { |
| unsigned int value = 0; |
| unsigned int i = 0, j = 0; |
| |
| value = 0; |
| |
| str_to_ip(&value, argv[3]); |
| |
| reg_write(REG_ATA1_ADDR, value); |
| printf("REG_ATA1_ADDR is 0x%x\n\r", value); |
| |
| #if 0 |
| reg_write(REG_ATA2_ADDR, value); |
| printf("REG_ATA2_ADDR is 0x%x\n\r", value); |
| #endif |
| if (!argv[4] || strlen(argv[4]) != 8) { |
| printf("portmap format error, should be of length 7\n"); |
| return; |
| } |
| j = 0; |
| for (i = 0; i < 7; i++) { |
| if (argv[4][i] != '0' && argv[4][i] != '1') { |
| printf |
| ("portmap format error, should be of combination of 0 or 1\n"); |
| return; |
| } |
| j += (argv[4][i] - '0') * (1 << i); |
| } |
| value = j << 4; //w_port_map |
| value |= (0x3 << 2); //static |
| |
| reg_write(REG_ATWD_ADDR, value); |
| |
| usleep(5000); |
| reg_read(REG_ATWD_ADDR, &value); |
| printf("REG_ATWD_ADDR is 0x%x\n\r", value); |
| |
| value = 0x8011; //single w_dip_cmd |
| reg_write(REG_ATC_ADDR, value); |
| |
| usleep(1000); |
| |
| for (i = 0; i < 20; i++) { |
| reg_read(REG_ATC_ADDR, &value); |
| if ((value & 0x8000) == 0) { //mac address busy |
| printf("done.\n"); |
| return; |
| } |
| usleep(1000); |
| } |
| if (i == 20) |
| printf("timeout.\n"); |
| } |
| |
| void dip_del(int argc, char *argv[]) |
| { |
| unsigned int i, value; |
| |
| value = 0; |
| str_to_ip(&value, argv[3]); |
| |
| reg_write(REG_ATA1_ADDR, value); |
| |
| value = 0; |
| reg_write(REG_ATA2_ADDR, value); |
| |
| value = 0; //STATUS=0, delete dip |
| reg_write(REG_ATWD_ADDR, value); |
| |
| value = 0x8011; //w_dip_cmd |
| reg_write(REG_ATC_ADDR, value); |
| |
| for (i = 0; i < 20; i++) { |
| reg_read(REG_ATC_ADDR, &value); |
| if ((value & 0x8000) == 0) { //mac address busy |
| if (argv[1] != NULL) |
| printf("done.\n"); |
| return; |
| } |
| usleep(1000); |
| } |
| if (i == 20) |
| printf("timeout.\n"); |
| } |
| |
| void dip_clear(int argc, char *argv[]) |
| { |
| |
| unsigned int value = 0; |
| |
| reg_write(REG_ATC_ADDR, 0x8102); //clear all dip |
| usleep(5000); |
| reg_read(REG_ATC_ADDR, &value); |
| printf("REG_ATC_ADDR is 0x%x\n\r", value); |
| } |
| |
| static void sip_dump_internal(int type) |
| { |
| unsigned int i = 0, j = 0, value = 0, mac = 0, mac2 = 0, value2 = 0; |
| int table_size = 0; |
| int hit_value1 = 0; |
| int hit_value2 = 0; |
| char tmpstr[16] = { 0 }; |
| |
| if (type == GENERAL_TABLE) { |
| table_size = 0x800; |
| reg_write(REG_ATC_ADDR, 0x8204); //sip search command |
| } else { |
| table_size = 0x40; |
| reg_write(REG_ATC_ADDR, 0x822c); //sip search command |
| } |
| printf("hash port(0:6) dip-address sip-address ATRD\n"); |
| for (i = 0; i < table_size; i++) { |
| while (1) { |
| reg_read(REG_ATC_ADDR, &value); |
| if (type == GENERAL_TABLE) { |
| hit_value1 = value & (0x1 << 13); |
| hit_value2 = 1; |
| } else { |
| hit_value1 = value & (0x1 << 13); |
| hit_value2 = value & (0x1 << 28); |
| } |
| |
| if (hit_value1 && hit_value2) { //search_rdy |
| reg_read(REG_ATRD_ADDR, &value2); |
| //printf("REG_ATRD_ADDR=0x%x\n\r",value2); |
| |
| printf("%03x: ", (value >> 16) & 0xfff); //hash_addr_lu |
| j = (value2 >> 4) & 0xff; //r_port_map |
| printf("%c", (j & 0x01) ? '1' : '-'); |
| printf("%c", (j & 0x02) ? '1' : '-'); |
| printf("%c", (j & 0x04) ? '1' : '-'); |
| printf("%c", (j & 0x08) ? '1' : '-'); |
| printf(" %c", (j & 0x10) ? '1' : '-'); |
| printf("%c", (j & 0x20) ? '1' : '-'); |
| printf("%c", (j & 0x40) ? '1' : '-'); |
| |
| reg_read(REG_TSRA2_ADDR, &mac2); |
| |
| ip_to_str(tmpstr, mac2); |
| printf(" %s", tmpstr); |
| |
| //printf(" %4d", (value2 >> 24) & 0xff); //r_age_field |
| reg_read(REG_TSRA1_ADDR, &mac); |
| ip_to_str(tmpstr, mac); |
| printf(" %s", tmpstr); |
| printf(" 0x%x\n", value2); |
| //printf("%04x", ((mac2 >> 16) & 0xffff)); |
| //printf(" %c\n", (((value2 >> 20) & 0x03)== 0x03)? 'y':'-'); |
| if (value & 0x4000) { |
| printf("end of table %d\n", i); |
| return; |
| } |
| break; |
| } else if (value & 0x4000) { //at_table_end |
| printf("found the last entry %d (not ready)\n", |
| i); |
| return; |
| } |
| usleep(5000); |
| } |
| |
| if (type == GENERAL_TABLE) |
| reg_write(REG_ATC_ADDR, 0x8205); //search for next sip address |
| else |
| reg_write(REG_ATC_ADDR, 0x822d); //search for next sip address |
| usleep(5000); |
| } |
| } |
| |
| void sip_dump(int argc, char *argv[]) |
| { |
| |
| sip_dump_internal(GENERAL_TABLE); |
| |
| } |
| |
| void sip_add(int argc, char *argv[]) |
| { |
| unsigned int i = 0, j = 0, value = 0; |
| |
| value = 0; |
| str_to_ip(&value, argv[3]); //SIP |
| |
| reg_write(REG_ATA2_ADDR, value); |
| printf("REG_ATA2_ADDR is 0x%x\n\r", value); |
| |
| value = 0; |
| |
| str_to_ip(&value, argv[4]); //DIP |
| reg_write(REG_ATA1_ADDR, value); |
| printf("REG_ATA1_ADDR is 0x%x\n\r", value); |
| |
| if (!argv[5] || strlen(argv[5]) != 8) { |
| printf("portmap format error, should be of length 7\n"); |
| return; |
| } |
| j = 0; |
| for (i = 0; i < 7; i++) { |
| if (argv[5][i] != '0' && argv[5][i] != '1') { |
| printf |
| ("portmap format error, should be of combination of 0 or 1\n"); |
| return; |
| } |
| j += (argv[5][i] - '0') * (1 << i); |
| } |
| value = j << 4; //w_port_map |
| value |= (0x3 << 2); //static |
| |
| reg_write(REG_ATWD_ADDR, value); |
| |
| usleep(5000); |
| reg_read(REG_ATWD_ADDR, &value); |
| printf("REG_ATWD_ADDR is 0x%x\n\r", value); |
| |
| value = 0x8021; //single w_sip_cmd |
| reg_write(REG_ATC_ADDR, value); |
| |
| usleep(1000); |
| |
| for (i = 0; i < 20; i++) { |
| reg_read(REG_ATC_ADDR, &value); |
| if ((value & 0x8000) == 0) { //mac address busy |
| printf("done.\n"); |
| return; |
| } |
| usleep(1000); |
| } |
| if (i == 20) |
| printf("timeout.\n"); |
| } |
| |
| void sip_del(int argc, char *argv[]) |
| { |
| unsigned int i = 0, value = 0; |
| |
| value = 0; |
| str_to_ip(&value, argv[3]); |
| |
| reg_write(REG_ATA2_ADDR, value); //SIP |
| |
| str_to_ip(&value, argv[4]); |
| reg_write(REG_ATA1_ADDR, value); //DIP |
| |
| value = 0; //STATUS=0, delete sip |
| reg_write(REG_ATWD_ADDR, value); |
| |
| value = 0x8021; //w_sip_cmd |
| reg_write(REG_ATC_ADDR, value); |
| |
| for (i = 0; i < 20; i++) { |
| reg_read(REG_ATC_ADDR, &value); |
| if ((value & 0x8000) == 0) { //mac address busy |
| if (argv[1] != NULL) |
| printf("done.\n"); |
| return; |
| } |
| usleep(1000); |
| } |
| if (i == 20) |
| printf("timeout.\n"); |
| } |
| |
| void sip_clear(int argc, char *argv[]) |
| { |
| unsigned int value = 0; |
| |
| reg_write(REG_ATC_ADDR, 0x8202); //clear all sip |
| usleep(5000); |
| reg_read(REG_ATC_ADDR, &value); |
| printf("REG_ATC_ADDR is 0x%x\n\r", value); |
| } |
| |
| static void table_dump_internal(int type) |
| { |
| unsigned int i = 0, j = 0, value = 0, mac = 0, mac2 = 0, value2 = 0; |
| int table_size = 0; |
| int table_end = 0; |
| int hit_value1 = 0; |
| int hit_value2 = 0; |
| |
| if (type == GENERAL_TABLE) { |
| table_size = 0x800; |
| table_end = 0x7FF; |
| reg_write(REG_ATC_ADDR, 0x8004); |
| } else { |
| table_size = 0x40; |
| table_end = 0x3F; |
| reg_write(REG_ATC_ADDR, 0x800C); |
| } |
| printf |
| ("hash port(0:6) fid vid age(s) mac-address filter my_mac\n"); |
| for (i = 0; i < table_size; i++) { |
| while (1) { |
| reg_read(REG_ATC_ADDR, &value); |
| //printf("ATC = 0x%x\n", value); |
| if (type == GENERAL_TABLE) { |
| hit_value1 = value & (0x1 << 13); |
| hit_value2 = 1; |
| } else { |
| hit_value1 = value & (0x1 << 13); |
| hit_value2 = value & (0x1 << 28); |
| } |
| |
| if (hit_value1 && hit_value2 |
| && (((value >> 15) & 0x1) == 0)) { |
| printf("%03x: ", (value >> 16) & 0xfff); |
| reg_read(REG_ATRD_ADDR, &value2); |
| j = (value2 >> 4) & 0xff; //r_port_map |
| printf("%c", (j & 0x01) ? '1' : '-'); |
| printf("%c", (j & 0x02) ? '1' : '-'); |
| printf("%c", (j & 0x04) ? '1' : '-'); |
| printf("%c", (j & 0x08) ? '1' : '-'); |
| printf("%c", (j & 0x10) ? '1' : '-'); |
| printf("%c", (j & 0x20) ? '1' : '-'); |
| printf("%c", (j & 0x40) ? '1' : '-'); |
| printf("%c", (j & 0x80) ? '1' : '-'); |
| |
| reg_read(REG_TSRA2_ADDR, &mac2); |
| |
| printf(" %2d", (mac2 >> 12) & 0x7); //FID |
| printf(" %4d", (mac2 & 0xfff)); |
| if (((value2 >> 24) & 0xff) == 0xFF) |
| printf(" --- "); //r_age_field:static |
| else |
| printf(" %5d ", (((value2 >> 24) & 0xff) + 1) * 2); //r_age_field |
| reg_read(REG_TSRA1_ADDR, &mac); |
| printf(" %08x", mac); |
| printf("%04x", ((mac2 >> 16) & 0xffff)); |
| printf(" %c", |
| (((value2 >> 20) & 0x03) == |
| 0x03) ? 'y' : '-'); |
| printf(" %c\n", |
| (((value2 >> 23) & 0x01) == |
| 0x01) ? 'y' : '-'); |
| if ((value & 0x4000) |
| && (((value >> 16) & 0xfff) == table_end)) { |
| printf("end of table %d\n", i); |
| return; |
| } |
| break; |
| } else if ((value & 0x4000) && (((value >> 15) & 0x1) == 0) && (((value >> 16) & 0xfff) == table_end)) { //at_table_end |
| printf("found the last entry %d (not ready)\n", |
| i); |
| return; |
| } else |
| usleep(5); |
| } |
| |
| if (type == GENERAL_TABLE) |
| reg_write(REG_ATC_ADDR, 0x8005); //search for next address |
| else |
| reg_write(REG_ATC_ADDR, 0x800d); //search for next address |
| usleep(5); |
| } |
| } |
| |
| void table_dump(int argc, char *argv[]) |
| { |
| table_dump_internal(GENERAL_TABLE); |
| |
| } |
| |
| void table_add(int argc, char *argv[]) |
| { |
| unsigned int i = 0, j = 0, value = 0, is_filter = 0, is_mymac = 0; |
| char tmpstr[9]; |
| |
| is_filter = (argv[1][0] == 'f') ? 1 : 0; |
| is_mymac = (argv[1][0] == 'm') ? 1 : 0; |
| if (!argv[2] || strlen(argv[2]) != 12) { |
| printf("MAC address format error, should be of length 12\n"); |
| return; |
| } |
| strncpy(tmpstr, argv[2], 8); |
| tmpstr[8] = '\0'; |
| value = strtoul(tmpstr, NULL, 16); |
| reg_write(REG_ATA1_ADDR, value); |
| printf("REG_ATA1_ADDR is 0x%x\n\r", value); |
| |
| strncpy(tmpstr, argv[2] + 8, 4); |
| tmpstr[4] = '\0'; |
| |
| value = strtoul(tmpstr, NULL, 16); |
| value = (value << 16); |
| value |= (1 << 15); //IVL=1 |
| |
| if (argc > 4) { |
| j = strtoul(argv[4], NULL, 0); |
| if (4095 < j) { |
| printf("wrong vid range, should be within 0~4095\n"); |
| return; |
| } |
| value |= j; //vid |
| } |
| |
| reg_write(REG_ATA2_ADDR, value); |
| printf("REG_ATA2_ADDR is 0x%x\n\r", value); |
| |
| if (!argv[3] || strlen(argv[3]) != 8) { |
| if (is_filter) |
| argv[3] = "11111111"; |
| else { |
| printf("portmap format error, should be of length 8\n"); |
| return; |
| } |
| } |
| j = 0; |
| for (i = 0; i < 7; i++) { |
| if (argv[3][i] != '0' && argv[3][i] != '1') { |
| printf |
| ("portmap format error, should be of combination of 0 or 1\n"); |
| return; |
| } |
| j += (argv[3][i] - '0') * (1 << i); |
| } |
| value = j << 4; //w_port_map |
| |
| if (argc > 5) { |
| j = strtoul(argv[5], NULL, 0); |
| if (j < 1 || 255 < j) { |
| printf("wrong age range, should be within 1~255\n"); |
| return; |
| } |
| value |= (j << 24); //w_age_field |
| value |= (0x1 << 2); //dynamic |
| } else { |
| value |= (0xff << 24); //w_age_field |
| value |= (0x3 << 2); //static |
| } |
| |
| if (argc > 6) { |
| j = strtoul(argv[6], NULL, 0); |
| if (7 < j) { |
| printf("wrong eg-tag range, should be within 0~7\n"); |
| return; |
| } |
| value |= (j << 13); //EG_TAG |
| } |
| |
| if (is_filter) |
| value |= (7 << 20); //sa_filter |
| |
| if (is_mymac) |
| value |= (1 << 23); |
| |
| reg_write(REG_ATWD_ADDR, value); |
| |
| usleep(5000); |
| reg_read(REG_ATWD_ADDR, &value); |
| printf("REG_ATWD_ADDR is 0x%x\n\r", value); |
| |
| value = 0x8001; //w_mac_cmd |
| reg_write(REG_ATC_ADDR, value); |
| |
| usleep(1000); |
| |
| for (i = 0; i < 20; i++) { |
| reg_read(REG_ATC_ADDR, &value); |
| if ((value & 0x8000) == 0) { //mac address busy |
| printf("done.\n"); |
| return; |
| } |
| usleep(1000); |
| } |
| if (i == 20) |
| printf("timeout.\n"); |
| } |
| |
| void table_search_mac_vid(int argc, char *argv[]) |
| { |
| unsigned int i = 0, j = 0, value = 0, mac = 0, mac2 = 0, value2 = 0; |
| char tmpstr[9]; |
| |
| if (!argv[3] || strlen(argv[3]) != 12) { |
| printf("MAC address format error, should be of length 12\n"); |
| return; |
| } |
| strncpy(tmpstr, argv[3], 8); |
| tmpstr[8] = '\0'; |
| value = strtoul(tmpstr, NULL, 16); |
| reg_write(REG_ATA1_ADDR, value); |
| //printf("REG_ATA1_ADDR is 0x%x\n\r",value); |
| |
| strncpy(tmpstr, argv[3] + 8, 4); |
| tmpstr[4] = '\0'; |
| |
| value = strtoul(tmpstr, NULL, 16); |
| value = (value << 16); |
| value |= (1 << 15); //IVL=1 |
| |
| j = strtoul(argv[5], NULL, 0); |
| if (4095 < j) { |
| printf("wrong vid range, should be within 0~4095\n"); |
| return; |
| } |
| value |= j; //vid |
| |
| reg_write(REG_ATA2_ADDR, value); |
| //printf("REG_ATA2_ADDR is 0x%x\n\r",value); |
| |
| value = 0x8000; //w_mac_cmd |
| reg_write(REG_ATC_ADDR, value); |
| |
| usleep(1000); |
| |
| for (i = 0; i < 20; i++) { |
| reg_read(REG_ATC_ADDR, &value); |
| if ((value & 0x8000) == 0) { //mac address busy |
| break; |
| } |
| usleep(1000); |
| } |
| if (i == 20) { |
| printf("search timeout.\n"); |
| return; |
| } |
| |
| if (value & 0x1000) { |
| printf("search no entry.\n"); |
| return; |
| } |
| |
| printf("search done.\n"); |
| printf |
| ("hash port(0:6) fid vid age mac-address filter my_mac\n"); |
| |
| printf("%03x: ", (value >> 16) & 0xfff); //hash_addr_lu |
| reg_read(REG_ATRD_ADDR, &value2); |
| j = (value2 >> 4) & 0xff; //r_port_map |
| printf("%c", (j & 0x01) ? '1' : '-'); |
| printf("%c", (j & 0x02) ? '1' : '-'); |
| printf("%c", (j & 0x04) ? '1' : '-'); |
| printf("%c ", (j & 0x08) ? '1' : '-'); |
| printf("%c", (j & 0x10) ? '1' : '-'); |
| printf("%c", (j & 0x20) ? '1' : '-'); |
| printf("%c", (j & 0x40) ? '1' : '-'); |
| printf("%c", (j & 0x80) ? '1' : '-'); |
| |
| reg_read(REG_TSRA2_ADDR, &mac2); |
| |
| printf(" %2d", (mac2 >> 12) & 0x7); //FID |
| printf(" %4d", (mac2 & 0xfff)); |
| printf(" %4d", (value2 >> 24) & 0xff); //r_age_field |
| reg_read(REG_TSRA1_ADDR, &mac); |
| printf(" %08x", mac); |
| printf("%04x", ((mac2 >> 16) & 0xffff)); |
| printf(" %c", (((value2 >> 20) & 0x03) == 0x03) ? 'y' : '-'); |
| printf(" %c\n", (((value2 >> 23) & 0x01) == 0x01) ? 'y' : '-'); |
| } |
| |
| void table_search_mac_fid(int argc, char *argv[]) |
| { |
| unsigned int i = 0, j = 0, value = 0, mac = 0, mac2 = 0, value2 = 0; |
| char tmpstr[9]; |
| |
| if (!argv[3] || strlen(argv[3]) != 12) { |
| printf("MAC address format error, should be of length 12\n"); |
| return; |
| } |
| strncpy(tmpstr, argv[3], 8); |
| tmpstr[8] = '\0'; |
| value = strtoul(tmpstr, NULL, 16); |
| reg_write(REG_ATA1_ADDR, value); |
| //printf("REG_ATA1_ADDR is 0x%x\n\r",value); |
| |
| strncpy(tmpstr, argv[3] + 8, 4); |
| tmpstr[4] = '\0'; |
| |
| value = strtoul(tmpstr, NULL, 16); |
| value = (value << 16); |
| value &= ~(1 << 15); //IVL=0 |
| |
| j = strtoul(argv[5], NULL, 0); |
| if (7 < j) { |
| printf("wrong fid range, should be within 0~7\n"); |
| return; |
| } |
| value |= (j << 12); //vid |
| |
| reg_write(REG_ATA2_ADDR, value); |
| //printf("REG_ATA2_ADDR is 0x%x\n\r",value); |
| |
| value = 0x8000; //w_mac_cmd |
| reg_write(REG_ATC_ADDR, value); |
| |
| usleep(1000); |
| |
| for (i = 0; i < 20; i++) { |
| reg_read(REG_ATC_ADDR, &value); |
| if ((value & 0x8000) == 0) { //mac address busy |
| break; |
| } |
| usleep(1000); |
| } |
| if (i == 20) { |
| printf("search timeout.\n"); |
| return; |
| } |
| |
| if (value & 0x1000) { |
| printf("search no entry.\n"); |
| return; |
| } |
| |
| printf("search done.\n"); |
| printf |
| ("hash port(0:6) fid vid age mac-address filter my_mac\n"); |
| |
| printf("%03x: ", (value >> 16) & 0xfff); //hash_addr_lu |
| reg_read(REG_ATRD_ADDR, &value2); |
| j = (value2 >> 4) & 0xff; //r_port_map |
| printf("%c", (j & 0x01) ? '1' : '-'); |
| printf("%c", (j & 0x02) ? '1' : '-'); |
| printf("%c", (j & 0x04) ? '1' : '-'); |
| printf("%c ", (j & 0x08) ? '1' : '-'); |
| printf("%c", (j & 0x10) ? '1' : '-'); |
| printf("%c", (j & 0x20) ? '1' : '-'); |
| printf("%c", (j & 0x40) ? '1' : '-'); |
| printf("%c", (j & 0x80) ? '1' : '-'); |
| |
| reg_read(REG_TSRA2_ADDR, &mac2); |
| |
| printf(" %2d", (mac2 >> 12) & 0x7); //FID |
| printf(" %4d", (mac2 & 0xfff)); |
| printf(" %4d", (value2 >> 24) & 0xff); //r_age_field |
| reg_read(REG_TSRA1_ADDR, &mac); |
| printf(" %08x", mac); |
| printf("%04x", ((mac2 >> 16) & 0xffff)); |
| printf(" %c", (((value2 >> 20) & 0x03) == 0x03) ? 'y' : '-'); |
| printf(" %c\n", (((value2 >> 23) & 0x01) == 0x01) ? 'y' : '-'); |
| } |
| |
| void table_del_fid(int argc, char *argv[]) |
| { |
| unsigned int i = 0, j = 0, value = 0; |
| char tmpstr[9]; |
| |
| if (!argv[3] || strlen(argv[3]) != 12) { |
| printf("MAC address format error, should be of length 12\n"); |
| return; |
| } |
| strncpy(tmpstr, argv[3], 8); |
| tmpstr[8] = '\0'; |
| value = strtoul(tmpstr, NULL, 16); |
| reg_write(REG_ATA1_ADDR, value); |
| strncpy(tmpstr, argv[3] + 8, 4); |
| tmpstr[4] = '\0'; |
| value = strtoul(tmpstr, NULL, 16); |
| value = (value << 16); |
| |
| if (argc > 5) { |
| j = strtoul(argv[5], NULL, 0); |
| if (j > 7) { |
| printf("wrong fid range, should be within 0~7\n"); |
| return; |
| } |
| value |= (j << 12); /* fid */ |
| } |
| |
| reg_write(REG_ATA2_ADDR, value); |
| |
| value = 0; /* STATUS=0, delete mac */ |
| reg_write(REG_ATWD_ADDR, value); |
| |
| value = 0x8001; //w_mac_cmd |
| reg_write(REG_ATC_ADDR, value); |
| |
| for (i = 0; i < 20; i++) { |
| reg_read(REG_ATC_ADDR, &value); |
| if ((value & 0x8000) == 0) { /* mac address busy */ |
| if (argv[1] != NULL) |
| printf("done.\n"); |
| return; |
| } |
| usleep(1000); |
| } |
| if (i == 20) |
| printf("timeout.\n"); |
| } |
| |
| void table_del_vid(int argc, char *argv[]) |
| { |
| unsigned int i = 0, j = 0, value = 0; |
| char tmpstr[9]; |
| |
| if (!argv[3] || strlen(argv[3]) != 12) { |
| printf("MAC address format error, should be of length 12\n"); |
| return; |
| } |
| strncpy(tmpstr, argv[3], 8); |
| tmpstr[8] = '\0'; |
| value = strtoul(tmpstr, NULL, 16); |
| reg_write(REG_ATA1_ADDR, value); |
| |
| strncpy(tmpstr, argv[3] + 8, 4); |
| tmpstr[4] = '\0'; |
| value = strtoul(tmpstr, NULL, 16); |
| value = (value << 16); |
| |
| j = strtoul(argv[5], NULL, 0); |
| if (j > 4095) { |
| printf("wrong fid range, should be within 0~4095\n"); |
| return; |
| } |
| value |= j; //vid |
| value |= 1 << 15; |
| reg_write(REG_ATA2_ADDR, value); |
| |
| value = 0; //STATUS=0, delete mac |
| reg_write(REG_ATWD_ADDR, value); |
| |
| value = 0x8001; //w_mac_cmd |
| reg_write(REG_ATC_ADDR, value); |
| |
| for (i = 0; i < 20; i++) { |
| reg_read(REG_ATC_ADDR, &value); |
| if ((value & 0x8000) == 0) { //mac address busy |
| if (argv[1] != NULL) |
| printf("done.\n"); |
| return; |
| } |
| usleep(1000); |
| } |
| if (i == 20) |
| printf("timeout.\n"); |
| } |
| |
| void table_clear(int argc, char *argv[]) |
| { |
| unsigned int value = 0; |
| |
| reg_write(REG_ATC_ADDR, 0x8002); |
| usleep(5000); |
| reg_read(REG_ATC_ADDR, &value); |
| |
| printf("REG_ATC_ADDR is 0x%x\n\r", value); |
| } |
| |
| void set_mirror_to(int argc, char *argv[]) |
| { |
| unsigned int value = 0; |
| int idx = 0; |
| |
| idx = strtoul(argv[3], NULL, 0); |
| if (idx < 0 || MAX_PORT < idx) { |
| printf("wrong port member, should be within 0~%d\n", MAX_PORT); |
| return; |
| } |
| if (chip_name == 0x7530) { |
| |
| reg_read(REG_MFC_ADDR, &value); |
| value |= 0x1 << 3; |
| value &= 0xfffffff8; |
| value |= idx << 0; |
| |
| reg_write(REG_MFC_ADDR, value); |
| } else { |
| |
| reg_read(REG_CFC_ADDR, &value); |
| value &= (~REG_CFC_MIRROR_EN_MASK); |
| value |= (1 << REG_CFC_MIRROR_EN_OFFT); |
| value &= (~REG_CFC_MIRROR_PORT_MASK); |
| value |= (idx << REG_CFC_MIRROR_PORT_OFFT); |
| reg_write(REG_CFC_ADDR, value); |
| } |
| } |
| |
| void set_mirror_from(int argc, char *argv[]) |
| { |
| unsigned int offset = 0, value = 0; |
| int idx = 0, mirror = 0; |
| |
| idx = strtoul(argv[3], NULL, 0); |
| mirror = strtoul(argv[4], NULL, 0); |
| |
| if (idx < 0 || MAX_PORT < idx) { |
| printf("wrong port member, should be within 0~%d\n", MAX_PORT); |
| return; |
| } |
| |
| if (mirror < 0 || 3 < mirror) { |
| printf("wrong mirror setting, should be within 0~3\n"); |
| return; |
| } |
| |
| offset = (0x2004 | (idx << 8)); |
| reg_read(offset, &value); |
| |
| value &= 0xfffffcff; |
| value |= mirror << 8; |
| |
| reg_write(offset, value); |
| } |
| |
| void vlan_dump(int argc, char *argv[]) |
| { |
| unsigned int i = 0, j = 0, value = 0, value2 = 0; |
| int eg_tag = 0; |
| |
| if (argc == 4) { |
| if (!strncmp(argv[3], "egtag", 6)) |
| eg_tag = 1; |
| } |
| |
| if (eg_tag) |
| printf |
| (" vid fid portmap s-tag\teg_tag(0:untagged 2:tagged)\n"); |
| else |
| printf(" vid fid portmap s-tag\n"); |
| |
| for (i = 1; i < 4095; i++) { |
| value = (0x80000000 + i); //r_vid_cmd |
| reg_write(REG_VTCR_ADDR, value); |
| |
| for (j = 0; j < 20; j++) { |
| reg_read(REG_VTCR_ADDR, &value); |
| if ((value & 0x80000000) == 0) { //mac address busy |
| break; |
| } |
| usleep(1000); |
| } |
| if (j == 20) |
| printf("timeout.\n"); |
| |
| reg_read(REG_VAWD1_ADDR, &value); |
| reg_read(REG_VAWD2_ADDR, &value2); |
| //printf("REG_VAWD1_ADDR value%d is 0x%x\n\r", i, value); |
| //printf("REG_VAWD2_ADDR value%d is 0x%x\n\r", i, value2); |
| |
| if ((value & 0x01) != 0) { |
| printf(" %4d ", i); |
| printf(" %2d ", ((value & 0xe) >> 1)); |
| printf(" %c", (value & 0x00010000) ? '1' : '-'); |
| printf("%c", (value & 0x00020000) ? '1' : '-'); |
| printf("%c", (value & 0x00040000) ? '1' : '-'); |
| printf("%c", (value & 0x00080000) ? '1' : '-'); |
| printf("%c", (value & 0x00100000) ? '1' : '-'); |
| printf("%c", (value & 0x00200000) ? '1' : '-'); |
| printf("%c", (value & 0x00400000) ? '1' : '-'); |
| printf("%c", (value & 0x00800000) ? '1' : '-'); |
| printf(" %4d", ((value & 0xfff0) >> 4)); |
| if (eg_tag) { |
| printf("\t"); |
| if ((value & (0x3 << 28)) == (0x3 << 28)) { |
| /* VTAG_EN=1 and EG_CON=1 */ |
| printf("CONSISTENT"); |
| } else if (value & (0x1 << 28)) { |
| /* VTAG_EN=1 */ |
| printf("%d", (value2 & 0x0003) >> 0); |
| printf("%d", (value2 & 0x000c) >> 2); |
| printf("%d", (value2 & 0x0030) >> 4); |
| printf("%d", (value2 & 0x00c0) >> 6); |
| printf("%d", (value2 & 0x0300) >> 8); |
| printf("%d", (value2 & 0x0c00) >> 10); |
| printf("%d", (value2 & 0x3000) >> 12); |
| printf("%d", (value2 & 0xc000) >> 14); |
| } else { |
| /* VTAG_EN=0 */ |
| printf("DISABLED"); |
| } |
| } |
| printf("\n"); |
| } else { |
| /*print 16 vid for reference information */ |
| if (i <= 16) { |
| printf(" %4d ", i); |
| printf(" %2d ", ((value & 0xe) >> 1)); |
| printf(" invalid\n"); |
| } |
| } |
| } |
| } |
| |
| static long timespec_diff_us(struct timespec start, struct timespec end) |
| { |
| struct timespec temp; |
| unsigned long duration = 0; |
| |
| if ((end.tv_nsec - start.tv_nsec) < 0) { |
| temp.tv_sec = end.tv_sec - start.tv_sec - 1; |
| temp.tv_nsec = 1000000000 + end.tv_nsec - start.tv_nsec; |
| } else { |
| temp.tv_sec = end.tv_sec - start.tv_sec; |
| temp.tv_nsec = end.tv_nsec - start.tv_nsec; |
| } |
| /* calculate second part */ |
| duration += temp.tv_sec * 1000000; |
| /* calculate ns part */ |
| duration += temp.tv_nsec >> 10; |
| |
| return duration; |
| } |
| |
| void vlan_clear(int argc, char *argv[]) |
| { |
| unsigned int value = 0; |
| int vid = 0; |
| unsigned long duration_us = 0; |
| struct timespec start, end; |
| |
| for (vid = 0; vid < 4096; vid++) { |
| clock_gettime(CLOCK_REALTIME, &start); |
| value = 0; //invalid |
| reg_write(REG_VAWD1_ADDR, value); |
| |
| value = (0x80001000 + vid); //w_vid_cmd |
| reg_write(REG_VTCR_ADDR, value); |
| while (duration_us <= 1000) { |
| reg_read(REG_VTCR_ADDR, &value); |
| if ((value & 0x80000000) == 0) { //table busy |
| break; |
| } |
| clock_gettime(CLOCK_REALTIME, &end); |
| duration_us = timespec_diff_us(start, end); |
| } |
| if (duration_us > 1000) |
| printf("config vlan timeout: %ld.\n", duration_us); |
| } |
| } |
| |
| void vlan_set(int argc, char *argv[]) |
| { |
| unsigned int vlan_mem = 0; |
| unsigned int value = 0; |
| unsigned int value2 = 0; |
| int i = 0, vid = 0, fid = 0; |
| int stag = 0; |
| unsigned long eg_con = 0; |
| unsigned int eg_tag = 0; |
| |
| if (argc < 5) { |
| printf("insufficient arguments!\n"); |
| return; |
| } |
| |
| fid = strtoul(argv[3], NULL, 0); |
| if (fid < 0 || fid > 7) { |
| printf("wrong filtering db id range, should be within 0~7\n"); |
| return; |
| } |
| value |= (fid << 1); |
| |
| vid = strtoul(argv[4], NULL, 0); |
| if (vid < 0 || 0xfff < vid) { |
| printf("wrong vlan id range, should be within 0~4095\n"); |
| return; |
| } |
| |
| if (strlen(argv[5]) != 8) { |
| printf("portmap format error, should be of length 7\n"); |
| return; |
| } |
| |
| vlan_mem = 0; |
| for (i = 0; i < 8; i++) { |
| if (argv[5][i] != '0' && argv[5][i] != '1') { |
| printf |
| ("portmap format error, should be of combination of 0 or 1\n"); |
| return; |
| } |
| vlan_mem += (argv[5][i] - '0') * (1 << i); |
| } |
| |
| /* VLAN stag */ |
| if (argc > 6) { |
| stag = strtoul(argv[6], NULL, 16); |
| if (stag < 0 || 0xfff < stag) { |
| printf |
| ("wrong stag id range, should be within 0~4095\n"); |
| return; |
| } |
| //printf("STAG is 0x%x\n", stag); |
| } |
| |
| /* set vlan member */ |
| value |= (vlan_mem << 16); |
| value |= (1 << 30); //IVL=1 |
| value |= ((stag & 0xfff) << 4); //stag |
| value |= 1; //valid |
| |
| if (argc > 7) { |
| eg_con = strtoul(argv[7], NULL, 2); |
| eg_con = !!eg_con; |
| value |= (eg_con << 29); //eg_con |
| value |= (1 << 28); //eg tag control enable |
| } |
| |
| if (argc > 8 && !eg_con) { |
| if (strlen(argv[8]) != 8) { |
| printf |
| ("egtag portmap format error, should be of length 7\n"); |
| return; |
| } |
| |
| for (i = 0; i < 8; i++) { |
| if (argv[8][i] < '0' || argv[8][i] > '3') { |
| printf |
| ("egtag portmap format error, should be of combination of 0 or 3\n"); |
| return; |
| } |
| //eg_tag += (argv[8][i] - '0') * (1 << i * 2); |
| eg_tag |= (argv[8][i] - '0') << (i * 2); |
| } |
| |
| value |= (1 << 28); //eg tag control enable |
| value2 &= ~(0xffff); |
| value2 |= eg_tag; |
| } |
| reg_write(REG_VAWD1_ADDR, value); |
| reg_write(REG_VAWD2_ADDR, value2); |
| //printf("VAWD1=0x%08x VAWD2=0x%08x ", value, value2); |
| |
| value = (0x80001000 + vid); //w_vid_cmd |
| reg_write(REG_VTCR_ADDR, value); |
| //printf("VTCR=0x%08x\n", value); |
| |
| for (i = 0; i < 300; i++) { |
| usleep(1000); |
| reg_read(REG_VTCR_ADDR, &value); |
| if ((value & 0x80000000) == 0) //table busy |
| break; |
| } |
| |
| if (i == 300) |
| printf("config vlan timeout.\n"); |
| } |
| |
| void igmp_on(int argc, char *argv[]) |
| { |
| unsigned int leaky_en = 0; |
| unsigned int wan_num = 4; |
| unsigned int port = 0, offset = 0, value = 0; |
| char cmd[80]; |
| int ret; |
| |
| if (argc > 3) |
| leaky_en = strtoul(argv[3], NULL, 10); |
| if (argc > 4) |
| wan_num = strtoul(argv[4], NULL, 10); |
| |
| if (leaky_en == 1) { |
| if (wan_num == 4) { |
| /* reg_write(0x2410, 0x810000c8); */ |
| reg_read(0x2410, &value); |
| reg_write(0x2410, value | (1 << 3)); |
| /* reg_write(0x2010, 0x810000c0); */ |
| reg_read(0x2010, &value); |
| reg_write(0x2010, value & (~(1 << 3))); |
| reg_write(REG_ISC_ADDR, 0x10027d10); |
| } else { |
| /* reg_write(0x2010, 0x810000c8); */ |
| reg_read(0x2010, &value); |
| reg_write(0x2010, value | (1 << 3)); |
| /* reg_write(0x2410, 0x810000c0); */ |
| reg_read(0x2410, &value); |
| reg_write(0x2410, value & (~(1 << 3))); |
| reg_write(REG_ISC_ADDR, 0x01027d01); |
| } |
| } else |
| reg_write(REG_ISC_ADDR, 0x10027d60); |
| |
| reg_write(0x1c, 0x08100810); |
| reg_write(0x2008, 0xb3ff); |
| reg_write(0x2108, 0xb3ff); |
| reg_write(0x2208, 0xb3ff); |
| reg_write(0x2308, 0xb3ff); |
| reg_write(0x2408, 0xb3ff); |
| reg_write(0x2608, 0xb3ff); |
| /* Enable Port ACL |
| * reg_write(0x2P04, 0xff0403); |
| */ |
| for (port = 0; port <= 6; port++) { |
| offset = 0x2004 + port * 0x100; |
| reg_read(offset, &value); |
| reg_write(offset, value | (1 << 10)); |
| } |
| |
| /*IGMP query only p4 -> p5 */ |
| reg_write(0x94, 0x00ff0002); |
| if (wan_num == 4) |
| reg_write(0x98, 0x000a1008); |
| else |
| reg_write(0x98, 0x000a0108); |
| reg_write(0x90, 0x80005000); |
| reg_write(0x94, 0xff001100); |
| if (wan_num == 4) |
| reg_write(0x98, 0x000B1000); |
| else |
| reg_write(0x98, 0x000B0100); |
| reg_write(0x90, 0x80005001); |
| reg_write(0x94, 0x3); |
| reg_write(0x98, 0x0); |
| reg_write(0x90, 0x80009000); |
| reg_write(0x94, 0x1a002080); |
| reg_write(0x98, 0x0); |
| reg_write(0x90, 0x8000b000); |
| |
| /*IGMP p5 -> p4 */ |
| reg_write(0x94, 0x00ff0002); |
| reg_write(0x98, 0x000a2008); |
| reg_write(0x90, 0x80005002); |
| reg_write(0x94, 0x4); |
| reg_write(0x98, 0x0); |
| reg_write(0x90, 0x80009001); |
| if (wan_num == 4) |
| reg_write(0x94, 0x1a001080); |
| else |
| reg_write(0x94, 0x1a000180); |
| reg_write(0x98, 0x0); |
| reg_write(0x90, 0x8000b001); |
| |
| /*IGMP p0~p3 -> p6 */ |
| reg_write(0x94, 0x00ff0002); |
| if (wan_num == 4) |
| reg_write(0x98, 0x000a0f08); |
| else |
| reg_write(0x98, 0x000a1e08); |
| reg_write(0x90, 0x80005003); |
| reg_write(0x94, 0x8); |
| reg_write(0x98, 0x0); |
| reg_write(0x90, 0x80009002); |
| reg_write(0x94, 0x1a004080); |
| reg_write(0x98, 0x0); |
| reg_write(0x90, 0x8000b002); |
| |
| /*IGMP query only p6 -> p0~p3 */ |
| reg_write(0x94, 0x00ff0002); |
| reg_write(0x98, 0x000a4008); |
| reg_write(0x90, 0x80005004); |
| reg_write(0x94, 0xff001100); |
| reg_write(0x98, 0x000B4000); |
| reg_write(0x90, 0x80005005); |
| reg_write(0x94, 0x30); |
| reg_write(0x98, 0x0); |
| reg_write(0x90, 0x80009003); |
| if (wan_num == 4) |
| reg_write(0x94, 0x1a000f80); |
| else |
| reg_write(0x94, 0x1a001e80); |
| reg_write(0x98, 0x0); |
| reg_write(0x90, 0x8000b003); |
| |
| /*Force eth2 to receive all igmp packets */ |
| snprintf(cmd, sizeof(cmd), |
| "echo 2 > /sys/devices/virtual/net/%s/brif/%s/multicast_router", |
| BR_DEVNAME, ETH_DEVNAME); |
| ret = system(cmd); |
| if (ret) |
| printf |
| ("Failed to set /sys/devices/virtual/net/%s/brif/%s/multicast_router\n", |
| BR_DEVNAME, ETH_DEVNAME); |
| } |
| |
| void igmp_disable(int argc, char *argv[]) |
| { |
| unsigned int reg_offset = 0, value = 0; |
| int port_num = 0; |
| |
| if (argc < 4) { |
| printf("insufficient arguments!\n"); |
| return; |
| } |
| port_num = strtoul(argv[3], NULL, 0); |
| if (port_num < 0 || 6 < port_num) { |
| printf("wrong port range, should be within 0~6\n"); |
| return; |
| } |
| //set ISC: IGMP Snooping Control Register (offset: 0x0018) |
| reg_offset = 0x2008; |
| reg_offset |= (port_num << 8); |
| value = 0x8000; |
| |
| reg_write(reg_offset, value); |
| } |
| |
| void igmp_enable(int argc, char *argv[]) |
| { |
| unsigned int reg_offset = 0, value = 0; |
| int port_num; |
| |
| if (argc < 4) { |
| printf("insufficient arguments!\n"); |
| return; |
| } |
| port_num = strtoul(argv[3], NULL, 0); |
| if (port_num < 0 || 6 < port_num) { |
| printf("wrong port range, should be within 0~6\n"); |
| return; |
| } |
| //set ISC: IGMP Snooping Control Register (offset: 0x0018) |
| reg_offset = 0x2008; |
| reg_offset |= (port_num << 8); |
| value = 0x9755; |
| reg_write(reg_offset, value); |
| } |
| |
| void igmp_off(int argc, char *argv[]) |
| { |
| unsigned int value = 0; |
| //set ISC: IGMP Snooping Control Register (offset: 0x0018) |
| reg_read(REG_ISC_ADDR, &value); |
| value &= ~(1 << 18); //disable |
| reg_write(REG_ISC_ADDR, value); |
| |
| /*restore wan port multicast leaky vlan function: default disabled */ |
| reg_read(0x2010, &value); |
| reg_write(0x2010, value & (~(1 << 3))); |
| reg_read(0x2410, &value); |
| reg_write(0x2410, value & (~(1 << 3))); |
| |
| printf("config igmpsnoop off.\n"); |
| } |
| |
| void switch_reset(int argc, char *argv[]) |
| { |
| if (chip_name == 0x7988) |
| return; |
| |
| unsigned int value = 0; |
| /*Software Register Reset and Software System Reset */ |
| reg_write(0x7000, 0x3); |
| reg_read(0x7000, &value); |
| printf("SYS_CTRL(0x7000) register value =0x%x \n", value); |
| if (chip_name == 0x7531) { |
| reg_write(0x7c0c, 0x11111111); |
| reg_read(0x7c0c, &value); |
| printf("GPIO Mode (0x7c0c) select value =0x%x \n", value); |
| } |
| printf("Switch Software Reset !!! \n"); |
| } |
| |
| void phy_set_fc(int argc, char *argv[]) |
| { |
| unsigned int port = 0, pause_capable = 0; |
| unsigned int phy_value = 0; |
| |
| port = atoi(argv[3]); |
| pause_capable = atoi(argv[4]); |
| |
| /*Check the input parameters is right or not. */ |
| if (port > MAX_PORT - 2 || pause_capable > 1) { |
| printf |
| ("Illegal parameter (port:0~4, full_duplex_pause_capable:0|1)\n"); |
| return; |
| } |
| printf("port=%d, full_duplex_pause_capable:%d\n", port, pause_capable); |
| |
| mii_mgr_read(port, 4, &phy_value); |
| printf("read phy_value:0x%x\r\n", phy_value); |
| phy_value &= (~(0x1 << 10)); |
| phy_value &= (~(0x1 << 11)); |
| if (pause_capable == 1) { |
| phy_value |= (0x1 << 10); |
| phy_value |= (0x1 << 11); |
| } |
| mii_mgr_write(port, 4, phy_value); |
| printf("write phy_value:0x%x\r\n", phy_value); |
| return; |
| } /*end phy_set_fc */ |
| |
| void phy_set_an(int argc, char *argv[]) |
| { |
| unsigned int port = 0, auto_negotiation_en = 0; |
| unsigned int phy_value = 0; |
| |
| port = atoi(argv[3]); |
| auto_negotiation_en = atoi(argv[4]); |
| |
| /*Check the input parameters is right or not. */ |
| if (port > MAX_PORT - 2 || auto_negotiation_en > 1) { |
| printf |
| ("Illegal parameter (port:0~4, auto_negotiation_en:0|1)\n"); |
| return; |
| } |
| printf("port=%d, auto_negotiation_en:%d\n", port, auto_negotiation_en); |
| |
| mii_mgr_read(port, 0, &phy_value); |
| printf("read phy_value:0x%x\r\n", phy_value); |
| phy_value &= (~(1 << 12)); |
| phy_value |= (auto_negotiation_en << 12); |
| mii_mgr_write(port, 0, phy_value); |
| printf("write phy_value:0x%x\r\n", phy_value); |
| } /*end phy_set_an */ |
| |
| void set_mac_pfc(int argc, char *argv[]) |
| { |
| unsigned int value = 0; |
| int port, enable = 0; |
| |
| port = atoi(argv[3]); |
| enable = atoi(argv[4]); |
| printf("enable: %d\n", enable); |
| if (port < 0 || port > 6 || enable < 0 || enable > 1) { |
| printf("Illegal parameter (port:0~6, enable|diable:0|1) \n"); |
| return; |
| } |
| if (chip_name == 0x7531 || chip_name == 0x7988) { |
| reg_read(REG_PFC_CTRL_ADDR, &value); |
| value &= ~(1 << port); |
| value |= (enable << port); |
| printf("write reg: %x, value: %x\n", REG_PFC_CTRL_ADDR, value); |
| reg_write(REG_PFC_CTRL_ADDR, value); |
| } else |
| printf("\nCommand not support by this chip.\n"); |
| } |
| |
| void global_set_mac_fc(int argc, char *argv[]) |
| { |
| unsigned char enable = 0; |
| unsigned int value = 0, reg = 0; |
| |
| if (chip_name == 0x7530) { |
| enable = atoi(argv[3]); |
| printf("enable: %d\n", enable); |
| |
| /*Check the input parameters is right or not. */ |
| if (enable > 1) { |
| printf(HELP_MACCTL_FC); |
| return; |
| } |
| reg_write(0x7000, 0x3); |
| reg = REG_GFCCR0_ADDR; |
| reg_read(REG_GFCCR0_ADDR, &value); |
| value &= (~REG_FC_EN_MASK); |
| value |= (enable << REG_FC_EN_OFFT); |
| printf("write reg: %x, value: %x\n", reg, value); |
| reg_write(REG_GFCCR0_ADDR, value); |
| } else |
| printf("\r\nCommand not support by this chip.\n"); |
| } /*end mac_set_fc */ |
| |
| void qos_sch_select(int argc, char *argv[]) |
| { |
| unsigned char port = 0, queue = 0; |
| unsigned char type = 0; |
| unsigned int value = 0, reg = 0; |
| |
| if (argc < 7) |
| return; |
| |
| port = atoi(argv[3]); |
| queue = atoi(argv[4]); |
| type = atoi(argv[6]); |
| |
| if (port > 6 || queue > 7) { |
| printf("\n Illegal input parameters\n"); |
| return; |
| } |
| |
| if ((type != 0 && type != 1 && type != 2)) { |
| printf(HELP_QOS_TYPE); |
| return; |
| } |
| |
| printf("\r\nswitch qos type: %d.\n", type); |
| |
| if (!strncmp(argv[5], "min", 4)) { |
| |
| if (type == 0) { |
| /*min sharper-->round roubin, disable min sharper rate limit */ |
| reg = GSW_MMSCR0_Q(queue) + 0x100 * port; |
| reg_read(reg, &value); |
| value = 0x0; |
| reg_write(reg, value); |
| } else if (type == 1) { |
| /*min sharper-->sp, disable min sharper rate limit */ |
| reg = GSW_MMSCR0_Q(queue) + 0x100 * port; |
| reg_read(reg, &value); |
| value = 0x0; |
| value |= (1 << 31); |
| reg_write(reg, value); |
| } else { |
| printf("min sharper only support: rr or sp\n"); |
| return; |
| } |
| } else if (!strncmp(argv[5], "max", 4)) { |
| if (type == 1) { |
| /*max sharper-->sp, disable max sharper rate limit */ |
| reg = GSW_MMSCR1_Q(queue) + 0x100 * port; |
| reg_read(reg, &value); |
| value = 0x0; |
| value |= (1 << 31); |
| reg_write(reg, value); |
| } else if (type == 2) { |
| /*max sharper-->wfq, disable max sharper rate limit */ |
| reg = GSW_MMSCR1_Q(queue) + 0x100 * port; |
| reg_read(reg, &value); |
| value = 0x0; |
| reg_write(reg, value); |
| } else { |
| printf("max sharper only support: wfq or sp\n"); |
| return; |
| } |
| } else { |
| printf("\r\nIllegal sharper:%s\n", argv[5]); |
| return; |
| } |
| printf("reg:0x%x--value:0x%x\n", reg, value); |
| } |
| |
| void get_upw(unsigned int *value, unsigned char base) |
| { |
| *value &= (~((0x7 << 0) | (0x7 << 4) | (0x7 << 8) | (0x7 << 12) | |
| (0x7 << 16) | (0x7 << 20))); |
| switch (base) { |
| case 0: /* port-based 0x2x40[18:16] */ |
| *value |= ((0x2 << 0) | (0x2 << 4) | (0x2 << 8) | |
| (0x2 << 12) | (0x7 << 16) | (0x2 << 20)); |
| break; |
| case 1: /* tagged-based 0x2x40[10:8] */ |
| *value |= ((0x2 << 0) | (0x2 << 4) | (0x7 << 8) | |
| (0x2 << 12) | (0x2 << 16) | (0x2 << 20)); |
| break; |
| case 2: /* DSCP-based 0x2x40[14:12] */ |
| *value |= ((0x2 << 0) | (0x2 << 4) | (0x2 << 8) | |
| (0x7 << 12) | (0x2 << 16) | (0x2 << 20)); |
| break; |
| case 3: /* acl-based 0x2x40[2:0] */ |
| *value |= ((0x7 << 0) | (0x2 << 4) | (0x2 << 8) | |
| (0x2 << 12) | (0x2 << 16) | (0x2 << 20)); |
| break; |
| case 4: /* arl-based 0x2x40[22:20] */ |
| *value |= ((0x2 << 0) | (0x2 << 4) | (0x2 << 8) | |
| (0x2 << 12) | (0x2 << 16) | (0x7 << 20)); |
| break; |
| case 5: /* stag-based 0x2x40[6:4] */ |
| *value |= ((0x2 << 0) | (0x7 << 4) | (0x2 << 8) | |
| (0x2 << 12) | (0x2 << 16) | (0x2 << 20)); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| void qos_set_base(int argc, char *argv[]) |
| { |
| unsigned char base = 0; |
| unsigned char port = 0; |
| unsigned int value = 0; |
| |
| if (argc < 5) |
| return; |
| |
| port = atoi(argv[3]); |
| base = atoi(argv[4]); |
| |
| if (base > 6) { |
| printf(HELP_QOS_BASE); |
| return; |
| } |
| |
| if (port > 6) { |
| printf("Illegal port index:%d\n", port); |
| return; |
| } |
| |
| printf("\r\nswitch qos base : %d. (port-based:0, tag-based:1,\ |
| dscp-based:2, acl-based:3, arl-based:4, stag-based:5)\n", base); |
| if (chip_name == 0x7530) { |
| |
| reg_read(0x44, &value); |
| get_upw(&value, base); |
| reg_write(0x44, value); |
| printf("reg: 0x44, value: 0x%x\n", value); |
| |
| } else if (chip_name == 0x7531 || chip_name == 0x7988) { |
| |
| reg_read(GSW_UPW(port), &value); |
| get_upw(&value, base); |
| reg_write(GSW_UPW(port), value); |
| printf("reg:0x%x, value: 0x%x\n", GSW_UPW(port), value); |
| |
| } else { |
| printf("unknown switch device"); |
| return; |
| } |
| } |
| |
| void qos_wfq_set_weight(int argc, char *argv[]) |
| { |
| int port = 0, weight[8], i = 0; |
| unsigned char queue = 0; |
| unsigned int reg = 0, value = 0; |
| |
| port = atoi(argv[3]); |
| |
| for (i = 0; i < 8; i++) { |
| weight[i] = atoi(argv[i + 4]); |
| } |
| |
| /* MT7530 total 7 port */ |
| if (port < 0 || port > 6) { |
| printf(HELP_QOS_PORT_WEIGHT); |
| return; |
| } |
| |
| for (i = 0; i < 8; i++) { |
| if (weight[i] < 1 || weight[i] > 16) { |
| printf(HELP_QOS_PORT_WEIGHT); |
| return; |
| } |
| } |
| printf("port: %x, q0: %x, q1: %x, q2: %x, q3: %x, \ |
| q4: %x, q5: %x, q6: %x, q7: %x\n", port, weight[0], weight[1], weight[2], weight[3], weight[4], weight[5], weight[6], weight[7]); |
| |
| for (queue = 0; queue < 8; queue++) { |
| reg = GSW_MMSCR1_Q(queue) + 0x100 * port; |
| reg_read(reg, &value); |
| value &= (~(0xf << 24)); //bit24~27 |
| value |= (((weight[queue] - 1) & 0xf) << 24); |
| printf("reg: %x, value: %x\n", reg, value); |
| reg_write(reg, value); |
| } |
| } |
| |
| void qos_set_portpri(int argc, char *argv[]) |
| { |
| unsigned char port = 0, prio = 0; |
| unsigned int value = 0; |
| |
| port = atoi(argv[3]); |
| prio = atoi(argv[4]); |
| |
| if (port >= 7 || prio > 7) { |
| printf(HELP_QOS_PORT_PRIO); |
| return; |
| } |
| |
| reg_read(GSW_PCR(port), &value); |
| value &= (~(0x7 << 24)); |
| value |= (prio << 24); |
| reg_write(GSW_PCR(port), value); |
| printf("write reg: %x, value: %x\n", GSW_PCR(port), value); |
| } |
| |
| void qos_set_dscppri(int argc, char *argv[]) |
| { |
| unsigned char prio = 0, dscp = 0, pim_n = 0, pim_offset = 0; |
| unsigned int value = 0, reg = 0; |
| |
| dscp = atoi(argv[3]); |
| prio = atoi(argv[4]); |
| |
| if (dscp > 63 || prio > 7) { |
| printf(HELP_QOS_DSCP_PRIO); |
| return; |
| } |
| |
| pim_n = dscp / 10; |
| pim_offset = (dscp - pim_n * 10) * 3; |
| reg = 0x0058 + pim_n * 4; |
| reg_read(reg, &value); |
| value &= (~(0x7 << pim_offset)); |
| value |= ((prio & 0x7) << pim_offset); |
| reg_write(reg, value); |
| printf("write reg: %x, value: %x\n", reg, value); |
| } |
| |
| void qos_pri_mapping_queue(int argc, char *argv[]) |
| { |
| unsigned char prio = 0, queue = 0, pem_n = 0, port = 0; |
| unsigned int value = 0, reg = 0; |
| |
| if (argc < 6) |
| return; |
| |
| port = atoi(argv[3]); |
| prio = atoi(argv[4]); |
| queue = atoi(argv[5]); |
| |
| if (prio > 7 || queue > 7) { |
| printf(HELP_QOS_PRIO_QMAP); |
| return; |
| } |
| |
| if (chip_name == 0x7530) { |
| pem_n = prio / 2; |
| reg = pem_n * 0x4 + 0x48; |
| reg_read(reg, &value); |
| if (prio % 2) { |
| value &= (~(0x7 << 24)); |
| value |= ((queue & 0x7) << 24); |
| } else { |
| value &= (~(0x7 << 8)); |
| value |= ((queue & 0x7) << 8); |
| } |
| reg_write(reg, value); |
| printf("write reg: %x, value: %x\n", reg, value); |
| } else if (chip_name == 0x7531 || chip_name == 0x7988) { |
| pem_n = prio / 2; |
| reg = GSW_PEM(pem_n) + 0x100 * port; |
| reg_read(reg, &value); |
| if (prio % 2) { // 1 1 |
| value &= (~(0x7 << 25)); |
| value |= ((queue & 0x7) << 25); |
| } else { // 0 0 |
| value &= (~(0x7 << 9)); |
| value |= ((queue & 0x7) << 9); |
| } |
| reg_write(reg, value); |
| printf("write reg: %x, value: %x\n", reg, value); |
| } else { |
| printf("unknown switch device"); |
| return; |
| } |
| } |
| |
| static int macMT753xVlanSetVid(unsigned char index, unsigned char active, |
| unsigned short vid, unsigned char portMap, |
| unsigned char tagPortMap, unsigned char ivl_en, |
| unsigned char fid, unsigned short stag) |
| { |
| unsigned int value = 0; |
| unsigned int value2 = 0; |
| unsigned int reg = 0; |
| int i = 0; |
| |
| printf("index: %x, active: %x, vid: %x, portMap: %x, \ |
| tagPortMap: %x, ivl_en: %x, fid: %x, stag: %x\n", index, active, vid, portMap, tagPortMap, ivl_en, fid, stag); |
| |
| value = (portMap << 16); |
| value |= (stag << 4); |
| value |= (ivl_en << 30); |
| value |= (fid << 1); |
| value |= (active ? 1 : 0); |
| |
| // total 7 ports |
| for (i = 0; i < 7; i++) { |
| if (tagPortMap & (1 << i)) |
| value2 |= 0x2 << (i * 2); |
| } |
| |
| if (value2) |
| value |= (1 << 28); // eg_tag |
| |
| reg = 0x98; // VAWD2 |
| reg_write(reg, value2); |
| |
| reg = 0x94; // VAWD1 |
| reg_write(reg, value); |
| |
| reg = 0x90; // VTCR |
| value = (0x80001000 + vid); |
| reg_write(reg, value); |
| |
| reg = 0x90; // VTCR |
| while (1) { |
| reg_read(reg, &value); |
| if ((value & 0x80000000) == 0) //table busy |
| break; |
| } |
| |
| /* switch clear */ |
| reg = 0x80; |
| reg_write(reg, 0x8002); |
| usleep(5000); |
| reg_read(reg, &value); |
| |
| printf("SetVid: index:%d active:%d vid:%d portMap:%x tagPortMap:%x\r\n", |
| index, active, vid, portMap, tagPortMap); |
| return 0; |
| |
| } /*end macMT753xVlanSetVid */ |
| |
| static int macMT753xVlanSetPvid(unsigned char port, unsigned short pvid) |
| { |
| unsigned int value = 0; |
| unsigned int reg = 0; |
| |
| /*Parameters is error */ |
| if (port > 6) |
| return -1; |
| |
| reg = 0x2014 + (port * 0x100); |
| reg_read(reg, &value); |
| value &= ~0xfff; |
| value |= pvid; |
| reg_write(reg, value); |
| |
| /* switch clear */ |
| reg = 0x80; |
| reg_write(reg, 0x8002); |
| usleep(5000); |
| reg_read(reg, &value); |
| |
| printf("SetPVID: port:%d pvid:%d\r\n", port, pvid); |
| return 0; |
| } |
| |
| void doVlanSetPvid(int argc, char *argv[]) |
| { |
| unsigned char port = 0; |
| unsigned short pvid = 0; |
| |
| port = atoi(argv[3]); |
| pvid = atoi(argv[4]); |
| /*Check the input parameters is right or not. */ |
| if ((port >= SWITCH_MAX_PORT) || (pvid > MAX_VID_VALUE)) { |
| printf(HELP_VLAN_PVID); |
| return; |
| } |
| |
| macMT753xVlanSetPvid(port, pvid); |
| |
| printf("port:%d pvid:%d,vlancap: max_port:%d maxvid:%d\r\n", |
| port, pvid, SWITCH_MAX_PORT, MAX_VID_VALUE); |
| } /*end doVlanSetPvid */ |
| |
| void doVlanSetVid(int argc, char *argv[]) |
| { |
| unsigned char index = 0; |
| unsigned char active = 0; |
| unsigned char portMap = 0; |
| unsigned char tagPortMap = 0; |
| unsigned short vid = 0; |
| |
| unsigned char ivl_en = 0; |
| unsigned char fid = 0; |
| unsigned short stag = 0; |
| |
| index = atoi(argv[3]); |
| active = atoi(argv[4]); |
| vid = atoi(argv[5]); |
| |
| /*Check the input parameters is right or not. */ |
| if ((index >= MAX_VLAN_RULE) || (vid >= 4096) || (active > ACTIVED)) { |
| printf(HELP_VLAN_VID); |
| return; |
| } |
| |
| /*CPU Port is always the membership */ |
| portMap = atoi(argv[6]); |
| tagPortMap = atoi(argv[7]); |
| |
| printf("subcmd parameter argc = %d\r\n", argc); |
| if (argc >= 9) { |
| ivl_en = atoi(argv[8]); |
| if (argc >= 10) { |
| fid = atoi(argv[9]); |
| if (argc >= 11) |
| stag = atoi(argv[10]); |
| } |
| } |
| macMT753xVlanSetVid(index, active, vid, portMap, tagPortMap, |
| ivl_en, fid, stag); |
| printf("index:%d active:%d vid:%d\r\n", index, active, vid); |
| } /*end doVlanSetVid */ |
| |
| void doVlanSetAccFrm(int argc, char *argv[]) |
| { |
| unsigned char port = 0; |
| unsigned char type = 0; |
| unsigned int value = 0; |
| unsigned int reg = 0; |
| |
| port = atoi(argv[3]); |
| type = atoi(argv[4]); |
| |
| printf("port: %d, type: %d\n", port, type); |
| |
| /*Check the input parameters is right or not. */ |
| if ((port > SWITCH_MAX_PORT) || (type > REG_PVC_ACC_FRM_RELMASK)) { |
| printf(HELP_VLAN_ACC_FRM); |
| return; |
| } |
| |
| reg = REG_PVC_P0_ADDR + port * 0x100; |
| reg_read(reg, &value); |
| value &= (~REG_PVC_ACC_FRM_MASK); |
| value |= ((unsigned int)type << REG_PVC_ACC_FRM_OFFT); |
| |
| printf("write reg: %x, value: %x\n", reg, value); |
| reg_write(reg, value); |
| } /*end doVlanSetAccFrm */ |
| |
| void doVlanSetPortAttr(int argc, char *argv[]) |
| { |
| unsigned char port = 0; |
| unsigned char attr = 0; |
| unsigned int value = 0; |
| unsigned int reg = 0; |
| |
| port = atoi(argv[3]); |
| attr = atoi(argv[4]); |
| |
| printf("port: %x, attr: %x\n", port, attr); |
| |
| /*Check the input parameters is right or not. */ |
| if (port > SWITCH_MAX_PORT || attr > 3) { |
| printf(HELP_VLAN_PORT_ATTR); |
| return; |
| } |
| |
| reg = 0x2010 + port * 0x100; |
| reg_read(reg, &value); |
| value &= (0xffffff3f); |
| value |= (attr << 6); |
| |
| printf("write reg: %x, value: %x\n", reg, value); |
| reg_write(reg, value); |
| } |
| |
| void doVlanSetPortMode(int argc, char *argv[]) |
| { |
| unsigned char port = 0; |
| unsigned char mode = 0; |
| unsigned int value = 0; |
| unsigned int reg = 0; |
| |
| port = atoi(argv[3]); |
| mode = atoi(argv[4]); |
| printf("port: %x, mode: %x\n", port, mode); |
| |
| /*Check the input parameters is right or not. */ |
| if (port > SWITCH_MAX_PORT || mode > 3) { |
| printf(HELP_VLAN_PORT_MODE); |
| return; |
| } |
| |
| reg = 0x2004 + port * 0x100; |
| reg_read(reg, &value); |
| value &= (~((1 << 0) | (1 << 1))); |
| value |= (mode & 0x3); |
| printf("write reg: %x, value: %x\n", reg, value); |
| reg_write(reg, value); |
| } |
| |
| void doVlanSetEgressTagPCR(int argc, char *argv[]) |
| { |
| unsigned char port = 0; |
| unsigned char eg_tag = 0; |
| unsigned int value = 0; |
| unsigned int reg = 0; |
| |
| port = atoi(argv[3]); |
| eg_tag = atoi(argv[4]); |
| |
| printf("port: %d, eg_tag: %d\n", port, eg_tag); |
| |
| /*Check the input parameters is right or not. */ |
| if ((port > SWITCH_MAX_PORT) || (eg_tag > REG_PCR_EG_TAG_RELMASK)) { |
| printf(HELP_VLAN_EGRESS_TAG_PCR); |
| return; |
| } |
| |
| reg = REG_PCR_P0_ADDR + port * 0x100; |
| reg_read(reg, &value); |
| value &= (~REG_PCR_EG_TAG_MASK); |
| value |= ((unsigned int)eg_tag << REG_PCR_EG_TAG_OFFT); |
| |
| printf("write reg: %x, value: %x\n", reg, value); |
| reg_write(reg, value); |
| |
| } /*end doVlanSetEgressTagPCR */ |
| |
| void doVlanSetEgressTagPVC(int argc, char *argv[]) |
| { |
| unsigned char port = 0; |
| unsigned char eg_tag = 0; |
| unsigned int value = 0; |
| unsigned int reg = 0; |
| |
| port = atoi(argv[3]); |
| eg_tag = atoi(argv[4]); |
| |
| printf("port: %d, eg_tag: %d\n", port, eg_tag); |
| |
| /*Check the input parameters is right or not. */ |
| if ((port > SWITCH_MAX_PORT) || (eg_tag > REG_PVC_EG_TAG_RELMASK)) { |
| printf(HELP_VLAN_EGRESS_TAG_PVC); |
| return; |
| } |
| |
| reg = REG_PVC_P0_ADDR + port * 0x100; |
| reg_read(reg, &value); |
| value &= (~REG_PVC_EG_TAG_MASK); |
| value |= ((unsigned int)eg_tag << REG_PVC_EG_TAG_OFFT); |
| |
| printf("write reg: %x, value: %x\n", reg, value); |
| reg_write(reg, value); |
| } /*end doVlanSetEgressTagPVC */ |
| |
| void doArlAging(int argc, char *argv[]) |
| { |
| unsigned char aging_en = 0; |
| unsigned int time = 0, aging_cnt = 0, aging_unit = 0, value = 0, reg = |
| 0; |
| |
| aging_en = atoi(argv[3]); |
| time = atoi(argv[4]); |
| printf("aging_en: %x, aging time: %x\n", aging_en, time); |
| |
| /*Check the input parameters is right or not. */ |
| if ((aging_en != 0 && aging_en != 1) || (time <= 0 || time > 65536)) { |
| printf(HELP_ARL_AGING); |
| return; |
| } |
| |
| reg = 0xa0; |
| reg_read(reg, &value); |
| value &= (~(1 << 20)); |
| if (!aging_en) { |
| value |= (1 << 20); |
| } |
| |
| aging_unit = (time / 0x100) + 1; |
| aging_cnt = (time / aging_unit); |
| aging_unit--; |
| aging_cnt--; |
| |
| value &= (0xfff00000); |
| value |= ((aging_cnt << 12) | aging_unit); |
| |
| printf("aging_unit: %x, aging_cnt: %x\n", aging_unit, aging_cnt); |
| printf("write reg: %x, value: %x\n", reg, value); |
| |
| reg_write(reg, value); |
| } |
| |
| void doMirrorEn(int argc, char *argv[]) |
| { |
| unsigned char mirror_en = 0; |
| unsigned char mirror_port = 0; |
| unsigned int value = 0, reg = 0; |
| |
| mirror_en = atoi(argv[3]); |
| mirror_port = atoi(argv[4]); |
| |
| printf("mirror_en: %d, mirror_port: %d\n", mirror_en, mirror_port); |
| |
| /*Check the input parameters is right or not. */ |
| if ((mirror_en > 1) || (mirror_port > REG_CFC_MIRROR_PORT_RELMASK)) { |
| printf(HELP_MIRROR_EN); |
| return; |
| } |
| |
| reg = REG_CFC_ADDR; |
| reg_read(reg, &value); |
| value &= (~REG_CFC_MIRROR_EN_MASK); |
| value |= (mirror_en << REG_CFC_MIRROR_EN_OFFT); |
| value &= (~REG_CFC_MIRROR_PORT_MASK); |
| value |= (mirror_port << REG_CFC_MIRROR_PORT_OFFT); |
| |
| printf("write reg: %x, value: %x\n", reg, value); |
| reg_write(reg, value); |
| |
| } /*end doMirrorEn */ |
| |
| void doMirrorPortBased(int argc, char *argv[]) |
| { |
| unsigned char port = 0, port_tx_mir = 0, port_rx_mir = 0, vlan_mis = |
| 0, acl_mir = 0, igmp_mir = 0; |
| unsigned int value = 0, reg = 0; |
| |
| port = atoi(argv[3]); |
| port_tx_mir = atoi(argv[4]); |
| port_rx_mir = atoi(argv[5]); |
| acl_mir = atoi(argv[6]); |
| vlan_mis = atoi(argv[7]); |
| igmp_mir = atoi(argv[8]); |
| |
| printf |
| ("port:%d, port_tx_mir:%d, port_rx_mir:%d, acl_mir:%d, vlan_mis:%d, igmp_mir:%d\n", |
| port, port_tx_mir, port_rx_mir, acl_mir, vlan_mis, igmp_mir); |
| |
| /*Check the input parameters is right or not. */ |
| //if((port >= vlanCap->max_port_no) || (port_tx_mir > 1) || (port_rx_mir > 1) || (acl_mir > 1) || (vlan_mis > 1)){ |
| if ((port >= 7) || (port_tx_mir > 1) || (port_rx_mir > 1) || (acl_mir > 1) || (vlan_mis > 1)) { // also allow CPU port (port6) |
| printf(HELP_MIRROR_PORTBASED); |
| return; |
| } |
| |
| reg = REG_PCR_P0_ADDR + port * 0x100; |
| reg_read(reg, &value); |
| value &= |
| ~(REG_PORT_TX_MIR_MASK | REG_PORT_RX_MIR_MASK | REG_PCR_ACL_MIR_MASK |
| | REG_PCR_VLAN_MIS_MASK); |
| value |= |
| (port_tx_mir << REG_PORT_TX_MIR_OFFT) + |
| (port_rx_mir << REG_PORT_RX_MIR_OFFT); |
| value |= |
| (acl_mir << REG_PCR_ACL_MIR_OFFT) + |
| (vlan_mis << REG_PCR_VLAN_MIS_OFFT); |
| |
| printf("write reg: %x, value: %x\n", reg, value); |
| reg_write(reg, value); |
| |
| reg = REG_PIC_P0_ADDR + port * 0x100; |
| reg_read(reg, &value); |
| value &= ~(REG_PIC_IGMP_MIR_MASK); |
| value |= (igmp_mir << REG_PIC_IGMP_MIR_OFFT); |
| |
| printf("write reg: %x, value: %x\n", reg, value); |
| reg_write(reg, value); |
| |
| } /*end doMirrorPortBased */ |
| |
| void doStp(int argc, char *argv[]) |
| { |
| unsigned char port = 0; |
| unsigned char fid = 0; |
| unsigned char state = 0; |
| unsigned int value = 0; |
| unsigned int reg = 0; |
| |
| port = atoi(argv[2]); |
| fid = atoi(argv[3]); |
| state = atoi(argv[4]); |
| |
| printf("port: %d, fid: %d, state: %d\n", port, fid, state); |
| |
| /*Check the input parameters is right or not. */ |
| if ((port > MAX_PORT + 1) || (fid > 7) || (state > 3)) { |
| printf(HELP_STP); |
| return; |
| } |
| |
| reg = REG_SSC_P0_ADDR + port * 0x100; |
| reg_read(reg, &value); |
| value &= (~(3 << (fid << 2))); |
| value |= ((unsigned int)state << (fid << 2)); |
| |
| printf("write reg: %x, value: %x\n", reg, value); |
| reg_write(reg, value); |
| } |
| |
| void _ingress_rate_set(int on_off, int port, int bw) |
| { |
| unsigned int reg = 0, value = 0; |
| |
| reg = 0x1800 + (0x100 * port); |
| value = 0; |
| /*token-bucket */ |
| if (on_off == 1) { |
| if (chip_name == 0x7530) { |
| if (bw > 1000000) { |
| printf |
| ("\n**Charge rate(%d) is larger than line rate(1000000kbps)**\n", |
| bw); |
| return; |
| } |
| value = |
| ((bw / 32) << 16) + (1 << 15) + (7 << 8) + |
| (1 << 7) + 0x0f; |
| } else if (chip_name == 0x7531 || chip_name == 0x7988) { |
| if ((chip_name == 0x7531) && (bw > 2500000)) { |
| printf |
| ("\n**Charge rate(%d) is larger than line rate(2500000kbps)**\n", |
| bw); |
| return; |
| } |
| |
| if ((chip_name == 0x7988) && (bw > 4000000)) { |
| printf |
| ("\n**Charge rate(%d) is larger than line rate(4000000kbps)**\n", |
| bw); |
| return; |
| } |
| |
| if (bw / 32 >= 65536) //supoort 2.5G case |
| value = |
| ((bw / 32) << 16) + (1 << 15) + (1 << 14) + |
| (1 << 12) + (7 << 8) + 0xf; |
| else |
| value = |
| ((bw / 32) << 16) + (1 << 15) + (1 << 14) + |
| (7 << 8) + 0xf; |
| } else |
| printf("unknow chip\n"); |
| } |
| #if leaky_bucket |
| reg_read(reg, &value); |
| value &= 0xffff0000; |
| if (on_off == 1) { |
| value |= on_off << 15; |
| //7530 same as 7531 |
| if (bw < 100) { |
| value |= (0x0 << 8); |
| value |= bw; |
| } else if (bw < 1000) { |
| value |= (0x1 << 8); |
| value |= bw / 10; |
| } else if (bw < 10000) { |
| value |= (0x2 << 8); |
| value |= bw / 100; |
| } else if (bw < 100000) { |
| value |= (0x3 << 8); |
| value |= bw / 1000; |
| } else { |
| value |= (0x4 << 8); |
| value |= bw / 10000; |
| } |
| } |
| #endif |
| reg_write(reg, value); |
| reg = 0x1FFC; |
| reg_read(reg, &value); |
| value = 0x110104; |
| reg_write(reg, value); |
| |
| if (on_off) |
| printf("switch port=%d, bw=%d\n", port, bw); |
| else |
| printf("switch port=%d ingress rate limit off\n", port); |
| } |
| |
| void ingress_rate_set(int argc, char *argv[]) |
| { |
| int on_off = 0, port = 0, bw = 0; |
| char *endptr; |
| |
| /* clear errno before conversion to detect overflow */ |
| errno = 0; |
| port = strtoul(argv[3], &endptr, 0); |
| |
| if (errno == ERANGE) { |
| printf("Conversion error, value out of range\n"); |
| return; |
| } |
| if (*endptr != '\0') { |
| printf("Conversion error, no digits were found\n"); |
| return; |
| } |
| |
| if (port < 0 || port > 6) { |
| printf("Wrong port range, should be within 0-6\n"); |
| return; |
| } |
| |
| if (argv[2][1] == 'n') { |
| errno = 0; |
| bw = strtoul(argv[4], &endptr, 0); |
| if (errno == ERANGE) { |
| printf("Conversion error, value out of range\n"); |
| return; |
| } |
| if (*endptr != '\0') { |
| printf("Conversion error, no digits were found\n"); |
| return; |
| } |
| on_off = 1; |
| } else if (argv[2][1] == 'f') { |
| if (argc != 4) |
| return; |
| on_off = 0; |
| } |
| |
| _ingress_rate_set(on_off, port, bw); |
| } |
| |
| void _egress_rate_set(int on_off, int port, int bw) |
| { |
| unsigned int value = 0, reg = 0; |
| |
| reg = 0x1040 + (0x100 * port); |
| value = 0; |
| /*token-bucket */ |
| if (on_off == 1) { |
| if (chip_name == 0x7530) { |
| if (bw < 0 || bw > 1000000) { |
| printf |
| ("\n**Charge rate(%d) is larger than line rate(1000000kbps)**\n", |
| bw); |
| return; |
| } |
| value = |
| ((bw / 32) << 16) + (1 << 15) + (7 << 8) + |
| (1 << 7) + 0xf; |
| } else if (chip_name == 0x7531 || chip_name == 0x7988) { |
| if ((chip_name == 0x7531) && (bw < 0 || bw > 2500000)) { |
| printf |
| ("\n**Charge rate(%d) is larger than line rate(2500000kbps)**\n", |
| bw); |
| return; |
| } |
| if ((chip_name == 0x7988) && (bw < 0 || bw > 4000000)) { |
| printf |
| ("\n**Charge rate(%d) is larger than line rate(4000000kbps)**\n", |
| bw); |
| return; |
| } |
| |
| if (bw / 32 >= 65536) //support 2.5G cases |
| value = |
| ((bw / 32) << 16) + (1 << 15) + (1 << 14) + |
| (1 << 12) + (7 << 8) + 0xf; |
| else |
| value = |
| ((bw / 32) << 16) + (1 << 15) + (1 << 14) + |
| (7 << 8) + 0xf; |
| } else |
| printf("unknow chip\n"); |
| } |
| reg_write(reg, value); |
| reg = 0x10E0; |
| reg_read(reg, &value); |
| value &= 0x18; |
| reg_write(reg, value); |
| |
| if (on_off) |
| printf("switch port=%d, bw=%d\n", port, bw); |
| else |
| printf("switch port=%d egress rate limit off\n", port); |
| } |
| |
| void egress_rate_set(int argc, char *argv[]) |
| { |
| unsigned int value = 0, reg = 0; |
| int on_off = 0, port = 0, bw = 0; |
| char *endptr; |
| |
| /* clear errno before conversion to detect overflow */ |
| errno = 0; |
| port = strtoul(argv[3], &endptr, 0); |
| if (errno == ERANGE) { |
| printf("Conversion error, value out of range\n"); |
| return; |
| } |
| if (*endptr != '\0') { |
| printf("Conversion error, no digits were found\n"); |
| return; |
| } |
| if (port < 0 || port > 6) { |
| printf("Wrong port range, should be within 0-6\n"); |
| return; |
| } |
| if (argv[2][1] == 'n') { |
| errno = 0; |
| bw = strtoul(argv[4], &endptr, 0); |
| if (errno == ERANGE) { |
| printf("Conversion error, value out of range\n"); |
| return; |
| } |
| if (*endptr != '\0') { |
| printf("Conversion error, no digits were found\n"); |
| return; |
| } |
| on_off = 1; |
| } else if (argv[2][1] == 'f') { |
| if (argc != 4) |
| return; |
| on_off = 0; |
| } |
| |
| _egress_rate_set(on_off, port, bw); |
| } |
| |
| void rate_control(int argc, char *argv[]) |
| { |
| unsigned char dir = 0; |
| unsigned char port = 0; |
| unsigned int rate = 0; |
| |
| dir = atoi(argv[2]); |
| port = atoi(argv[3]); |
| rate = atoi(argv[4]); |
| |
| if (port > 6) |
| return; |
| |
| if (dir == 1) //ingress |
| _ingress_rate_set(1, port, rate); |
| else if (dir == 0) //egress |
| _egress_rate_set(1, port, rate); |
| else |
| return; |
| } |
| |
| void collision_pool_enable(int argc, char *argv[]) |
| { |
| |
| unsigned char enable = 0; |
| unsigned int value = 0, reg = 0; |
| |
| enable = atoi(argv[3]); |
| |
| printf("collision pool enable: %d \n", enable); |
| |
| /*Check the input parameters is right or not. */ |
| if (enable > 1) { |
| printf(HELP_COLLISION_POOL_EN); |
| return; |
| } |
| |
| if (chip_name == 0x7531 || chip_name == 0x7988) { |
| reg = REG_CPGC_ADDR; |
| if (enable == 1) { |
| /* active reset */ |
| reg_read(reg, &value); |
| value &= (~REG_CPCG_COL_RST_N_MASK); |
| reg_write(reg, value); |
| |
| /* enanble clock */ |
| reg_read(reg, &value); |
| value &= (~REG_CPCG_COL_CLK_EN_MASK); |
| value |= (1 << REG_CPCG_COL_CLK_EN_OFFT); |
| reg_write(reg, value); |
| |
| /* inactive reset */ |
| reg_read(reg, &value); |
| value &= (~REG_CPCG_COL_RST_N_MASK); |
| value |= (1 << REG_CPCG_COL_RST_N_OFFT); |
| reg_write(reg, value); |
| |
| /* enable collision pool */ |
| reg_read(reg, &value); |
| value &= (~REG_CPCG_COL_EN_MASK); |
| value |= (1 << REG_CPCG_COL_EN_OFFT); |
| reg_write(reg, value); |
| |
| reg_read(reg, &value); |
| printf("write reg: %x, value: %x\n", reg, value); |
| } else { |
| |
| /* disable collision pool */ |
| reg_read(reg, &value); |
| value &= (~REG_CPCG_COL_EN_MASK); |
| reg_write(reg, value); |
| |
| /* active reset */ |
| reg_read(reg, &value); |
| value &= (~REG_CPCG_COL_RST_N_MASK); |
| reg_write(reg, value); |
| |
| /* inactive reset */ |
| reg_read(reg, &value); |
| value &= (~REG_CPCG_COL_RST_N_MASK); |
| value |= (1 << REG_CPCG_COL_RST_N_OFFT); |
| reg_write(reg, value); |
| |
| /* disable clock */ |
| reg_read(reg, &value); |
| value &= (~REG_CPCG_COL_CLK_EN_MASK); |
| reg_write(reg, value); |
| |
| reg_read(reg, &value); |
| printf("write reg: %x, value: %x\n", reg, value); |
| |
| } |
| } else { |
| printf("\nCommand not support by this chip.\n"); |
| } |
| } |
| |
| void collision_pool_mac_dump(int argc, char *argv[]) |
| { |
| unsigned int value = 0, reg = 0; |
| |
| if (chip_name == 0x7531 || chip_name == 0x7988) { |
| reg = REG_CPGC_ADDR; |
| reg_read(reg, &value); |
| if (value & REG_CPCG_COL_EN_MASK) |
| table_dump_internal(COLLISION_TABLE); |
| else |
| printf |
| ("\ncollision pool is disabled, please enable it before use this command.\n"); |
| } else { |
| printf("\nCommand not support by this chip.\n"); |
| } |
| } |
| |
| void collision_pool_dip_dump(int argc, char *argv[]) |
| { |
| unsigned int value = 0, reg = 0; |
| |
| if (chip_name == 0x7531 || chip_name == 0x7988) { |
| reg = REG_CPGC_ADDR; |
| reg_read(reg, &value); |
| if (value & REG_CPCG_COL_EN_MASK) |
| dip_dump_internal(COLLISION_TABLE); |
| else |
| printf |
| ("\ncollision pool is disabled, please enable it before use this command.\n"); |
| } else { |
| printf("\nCommand not support by this chip.\n"); |
| } |
| } |
| |
| void collision_pool_sip_dump(int argc, char *argv[]) |
| { |
| unsigned int value = 0, reg = 0; |
| |
| if (chip_name == 0x7531 || chip_name == 0x7988) { |
| reg = REG_CPGC_ADDR; |
| reg_read(reg, &value); |
| if (value & REG_CPCG_COL_EN_MASK) |
| sip_dump_internal(COLLISION_TABLE); |
| else |
| printf |
| ("\ncollision pool is disabled, please enable it before use this command.\n"); |
| } else { |
| printf("\nCommand not support by this chip.\n"); |
| } |
| } |
| |
| void pfc_get_rx_counter(int argc, char *argv[]) |
| { |
| int port = 0; |
| unsigned int value = 0, reg = 0; |
| unsigned int user_pri = 0; |
| |
| port = strtoul(argv[3], NULL, 0); |
| if (port < 0 || 6 < port) { |
| printf("wrong port range, should be within 0~6\n"); |
| return; |
| } |
| |
| if (chip_name == 0x7531 || chip_name == 0x7988) { |
| reg = PFC_RX_COUNTER_L(port); |
| reg_read(reg, &value); |
| user_pri = value & 0xff; |
| printf("\n port %d rx pfc (up=0)pause on counter is %d.\n", |
| port, user_pri); |
| user_pri = (value & 0xff00) >> 8; |
| printf("\n port %d rx pfc (up=1)pause on counter is %d.\n", |
| port, user_pri); |
| user_pri = (value & 0xff0000) >> 16; |
| printf("\n port %d rx pfc (up=2)pause on counter is %d.\n", |
| port, user_pri); |
| user_pri = (value & 0xff000000) >> 24; |
| printf("\n port %d rx pfc (up=3)pause on counter is %d.\n", |
| port, user_pri); |
| |
| reg = PFC_RX_COUNTER_H(port); |
| reg_read(reg, &value); |
| user_pri = value & 0xff; |
| printf("\n port %d rx pfc (up=4)pause on counter is %d.\n", |
| port, user_pri); |
| user_pri = (value & 0xff00) >> 8; |
| printf("\n port %d rx pfc (up=5)pause on counter is %d.\n", |
| port, user_pri); |
| user_pri = (value & 0xff0000) >> 16; |
| printf("\n port %d rx pfc (up=6)pause on counter is %d.\n", |
| port, user_pri); |
| user_pri = (value & 0xff000000) >> 24; |
| printf("\n port %d rx pfc (up=7)pause on counter is %d.\n", |
| port, user_pri); |
| |
| /* for rx counter could be updated successfully */ |
| reg_read(PMSR_P(port), &value); |
| reg_read(PMSR_P(port), &value); |
| } else { |
| printf("\nCommand not support by this chip.\n"); |
| } |
| |
| } |
| |
| void pfc_get_tx_counter(int argc, char *argv[]) |
| { |
| int port = 0; |
| unsigned int value = 0, reg = 0; |
| unsigned int user_pri = 0; |
| |
| port = strtoul(argv[3], NULL, 0); |
| if (port < 0 || 6 < port) { |
| printf("wrong port range, should be within 0~6\n"); |
| return; |
| } |
| |
| if (chip_name == 0x7531 || chip_name == 0x7988) { |
| reg = PFC_TX_COUNTER_L(port); |
| reg_read(reg, &value); |
| user_pri = value & 0xff; |
| printf("\n port %d tx pfc (up=0)pause on counter is %d.\n", |
| port, user_pri); |
| user_pri = (value & 0xff00) >> 8; |
| printf("\n port %d tx pfc (up=1)pause on counter is %d.\n", |
| port, user_pri); |
| user_pri = (value & 0xff0000) >> 16; |
| printf("\n port %d tx pfc (up=2)pause on counter is %d.\n", |
| port, user_pri); |
| user_pri = (value & 0xff000000) >> 24; |
| printf("\n port %d tx pfc (up=3)pause on counter is %d.\n", |
| port, user_pri); |
| |
| reg = PFC_TX_COUNTER_H(port); |
| reg_read(reg, &value); |
| user_pri = value & 0xff; |
| printf("\n port %d tx pfc (up=4)pause on counter is %d.\n", |
| port, user_pri); |
| user_pri = (value & 0xff00) >> 8; |
| printf("\n port %d tx pfc (up=5)pause on counter is %d.\n", |
| port, user_pri); |
| user_pri = (value & 0xff0000) >> 16; |
| printf("\n port %d tx pfc (up=6)pause on counter is %d.\n", |
| port, user_pri); |
| user_pri = (value & 0xff000000) >> 24; |
| printf("\n port %d tx pfc (up=7)pause on counter is %d.\n", |
| port, user_pri); |
| |
| /* for tx counter could be updated successfully */ |
| reg_read(PMSR_P(port), &value); |
| reg_read(PMSR_P(port), &value); |
| } else { |
| printf("\nCommand not support by this chip.\n"); |
| } |
| } |
| |
| void read_output_queue_counters(int argc, char *argv[]) |
| { |
| unsigned int port = 0; |
| unsigned int value = 0, output_queue = 0; |
| unsigned int base = 0x220; |
| |
| for (port = 0; port < 7; port++) { |
| reg_write(0x7038, base + (port * 4)); |
| reg_read(0x7034, &value); |
| output_queue = value & 0xff; |
| printf("\n port %d output queue 0 counter is %d.\n", port, |
| output_queue); |
| output_queue = (value & 0xff00) >> 8; |
| printf("\n port %d output queue 1 counter is %d.\n", port, |
| output_queue); |
| |
| reg_write(0x7038, base + (port * 4) + 1); |
| reg_read(0x7034, &value); |
| output_queue = value & 0xff; |
| printf("\n port %d output queue 2 counter is %d.\n", port, |
| output_queue); |
| output_queue = (value & 0xff00) >> 8; |
| printf("\n port %d output queue 3 counter is %d.\n", port, |
| output_queue); |
| |
| reg_write(0x7038, base + (port * 4) + 2); |
| reg_read(0x7034, &value); |
| output_queue = value & 0xff; |
| printf("\n port %d output queue 4 counter is %d.\n", port, |
| output_queue); |
| output_queue = (value & 0xff00) >> 8; |
| printf("\n port %d output queue 5 counter is %d.\n", port, |
| output_queue); |
| |
| reg_write(0x7038, base + (port * 4) + 3); |
| reg_read(0x7034, &value); |
| output_queue = value & 0xff; |
| printf("\n port %d output queue 6 counter is %d.\n", port, |
| output_queue); |
| output_queue = (value & 0xff00) >> 8; |
| printf("\n port %d output queue 7 counter is %d.\n", port, |
| output_queue); |
| } |
| } |
| |
| void read_free_page_counters(int argc, char *argv[]) |
| { |
| unsigned int value = 0; |
| unsigned int free_page = 0, free_page_last_read = 0; |
| unsigned int fc_free_blk_lothd = 0, fc_free_blk_hithd = 0; |
| unsigned int fc_port_blk_thd = 0, fc_port_blk_hi_thd = 0; |
| unsigned int queue[8] = { 0 }; |
| |
| if (chip_name == 0x7531 || chip_name == 0x7988) { |
| /* get system free page link counter */ |
| reg_read(0x1fc0, &value); |
| free_page = value & 0xFFF; |
| free_page_last_read = (value & 0xFFF0000) >> 16; |
| |
| /* get system flow control waterwark */ |
| reg_read(0x1fe0, &value); |
| fc_free_blk_lothd = value & 0x3FF; |
| fc_free_blk_hithd = (value & 0x3FF0000) >> 16; |
| |
| /* get port flow control waterwark */ |
| reg_read(0x1fe4, &value); |
| fc_port_blk_thd = value & 0x3FF; |
| fc_port_blk_hi_thd = (value & 0x3FF0000) >> 16; |
| |
| /* get queue flow control waterwark */ |
| reg_read(0x1fe8, &value); |
| queue[0] = value & 0x3F; |
| queue[1] = (value & 0x3F00) >> 8; |
| queue[2] = (value & 0x3F0000) >> 16; |
| queue[3] = (value & 0x3F000000) >> 24; |
| reg_read(0x1fec, &value); |
| queue[4] = value & 0x3F; |
| queue[5] = (value & 0x3F00) >> 8; |
| queue[6] = (value & 0x3F0000) >> 16; |
| queue[7] = (value & 0x3F000000) >> 24; |
| } else { |
| /* get system free page link counter */ |
| reg_read(0x1fc0, &value); |
| free_page = value & 0x3FF; |
| free_page_last_read = (value & 0x3FF0000) >> 16; |
| |
| /* get system flow control waterwark */ |
| reg_read(0x1fe0, &value); |
| fc_free_blk_lothd = value & 0xFF; |
| fc_free_blk_hithd = (value & 0xFF00) >> 8; |
| |
| /* get port flow control waterwark */ |
| reg_read(0x1fe0, &value); |
| fc_port_blk_thd = (value & 0xFF0000) >> 16; |
| reg_read(0x1ff4, &value); |
| fc_port_blk_hi_thd = (value & 0xFF00) >> 8; |
| |
| /* get queue flow control waterwark */ |
| reg_read(0x1fe4, &value); |
| queue[0] = value & 0xF; |
| queue[1] = (value & 0xF0) >> 4; |
| queue[2] = (value & 0xF00) >> 8; |
| queue[3] = (value & 0xF000) >> 12; |
| queue[4] = (value & 0xF0000) >> 16; |
| queue[5] = (value & 0xF00000) >> 20; |
| queue[6] = (value & 0xF000000) >> 24; |
| queue[7] = (value & 0xF0000000) >> 28; |
| } |
| |
| printf("<===Free Page=======Current=======Last Read access=====>\n"); |
| printf("\n"); |
| printf(" page counter %u %u\n ", |
| free_page, free_page_last_read); |
| printf("\n "); |
| printf("=========================================================\n"); |
| printf("<===Type=======High threshold======Low threshold=========\n"); |
| printf("\n "); |
| printf(" system: %u %u\n", |
| fc_free_blk_hithd * 2, fc_free_blk_lothd * 2); |
| printf(" port: %u %u\n", |
| fc_port_blk_hi_thd * 2, fc_port_blk_thd * 2); |
| printf(" queue 0: %u NA\n", |
| queue[0]); |
| printf(" queue 1: %u NA\n", |
| queue[1]); |
| printf(" queue 2: %u NA\n", |
| queue[2]); |
| printf(" queue 3: %u NA\n", |
| queue[3]); |
| printf(" queue 4: %u NA\n", |
| queue[4]); |
| printf(" queue 5: %u NA\n", |
| queue[5]); |
| printf(" queue 6: %u NA\n", |
| queue[6]); |
| printf(" queue 7: %u NA\n", |
| queue[7]); |
| printf("=========================================================\n"); |
| } |
| |
| void eee_enable(int argc, char *argv[]) |
| { |
| unsigned long enable = 0; |
| unsigned int value = 0; |
| unsigned int eee_cap = 0; |
| unsigned int eee_en_bitmap = 0; |
| unsigned long port_map = 0; |
| long port_num = -1; |
| int p = 0; |
| |
| if (argc < 3) |
| goto error; |
| |
| /* Check the input parameters is right or not. */ |
| if (!strncmp(argv[2], "enable", 7)) |
| enable = 1; |
| else if (!strncmp(argv[2], "disable", 8)) |
| enable = 0; |
| else |
| goto error; |
| |
| if (argc > 3) { |
| if (strlen(argv[3]) == 1) { |
| port_num = strtol(argv[3], (char **)NULL, 10); |
| if (port_num < 0 || port_num > MAX_PHY_PORT - 1) { |
| printf("Illegal port index and port:0~4\n"); |
| goto error; |
| } |
| port_map = 1 << port_num; |
| } else if (strlen(argv[3]) == 5) { |
| port_map = 0; |
| for (p = 0; p < MAX_PHY_PORT; p++) { |
| if (argv[3][p] != '0' && argv[3][p] != '1') { |
| printf |
| ("portmap format error, should be combination of 0 or 1\n"); |
| goto error; |
| } |
| port_map |= ((argv[3][p] - '0') << p); |
| } |
| } else { |
| printf |
| ("port_no or portmap format error, should be length of 1 or 5\n"); |
| goto error; |
| } |
| } else { |
| port_map = 0x1f; |
| } |
| |
| eee_cap = (enable) ? 6 : 0; |
| for (p = 0; p < MAX_PHY_PORT; p++) { |
| /* port_map describe p0p1p2p3p4 from left to rignt */ |
| if (!!(port_map & (1 << p))) |
| mii_mgr_c45_write(p, 0x7, 0x3c, eee_cap); |
| |
| mii_mgr_c45_read(p, 0x7, 0x3c, &value); |
| /* mt7531: Always readback eee_cap = 0 when global EEE switch |
| * is turned off. |
| */ |
| if (value | eee_cap) |
| eee_en_bitmap |= (1 << (MAX_PHY_PORT - 1 - p)); |
| } |
| |
| /* Turn on/off global EEE switch */ |
| if (chip_name == 0x7531 || chip_name == 0x7988) { |
| mii_mgr_c45_read(0, 0x1f, 0x403, &value); |
| if (eee_en_bitmap) |
| value |= (1 << 6); |
| else |
| value &= ~(1 << 6); |
| mii_mgr_c45_write(0, 0x1f, 0x403, value); |
| } else { |
| printf("\nCommand not support by this chip.\n"); |
| } |
| |
| printf("EEE(802.3az) %s", (enable) ? "enable" : "disable"); |
| if (argc == 4) { |
| if (port_num >= 0) |
| printf(" port%ld", port_num); |
| else |
| printf(" port_map: %s", argv[3]); |
| } else { |
| printf(" all ports"); |
| } |
| printf("\n"); |
| |
| return; |
| error: |
| printf(HELP_EEE_EN); |
| return; |
| } |
| |
| void eee_dump(int argc, char *argv[]) |
| { |
| unsigned int cap = 0, lp_cap = 0; |
| long port = -1; |
| int p = 0; |
| |
| if (argc > 3) { |
| if (strlen(argv[3]) > 1) { |
| printf("port# format error, should be of length 1\n"); |
| return; |
| } |
| |
| port = strtol(argv[3], (char **)NULL, 0); |
| if (port < 0 || port > MAX_PHY_PORT) { |
| printf("port# format error, should be 0 to %d\n", |
| MAX_PHY_PORT); |
| return; |
| } |
| } |
| |
| for (p = 0; p < MAX_PHY_PORT; p++) { |
| if (port >= 0 && p != port) |
| continue; |
| |
| mii_mgr_c45_read(p, 0x7, 0x3c, &cap); |
| mii_mgr_c45_read(p, 0x7, 0x3d, &lp_cap); |
| printf("port%d EEE cap=0x%02x, link partner EEE cap=0x%02x", |
| p, cap, lp_cap); |
| |
| if (port >= 0 && p == port) { |
| mii_mgr_c45_read(p, 0x3, 0x1, &cap); |
| printf(", st=0x%03x", cap); |
| } |
| printf("\n"); |
| } |
| } |
| |
| void dump_each_port(unsigned int base) |
| { |
| unsigned int pkt_cnt = 0; |
| int i = 0; |
| |
| for (i = 0; i < 7; i++) { |
| if (chip_name == 0x7988) { |
| if ((base == 0x402C) && (i == 6)) |
| base = 0x408C; |
| else if ((base == 0x408C) && (i == 6)) |
| base = 0x402C; |
| else |
| ; |
| } |
| reg_read((base) + (i * 0x100), &pkt_cnt); |
| printf("%8u ", pkt_cnt); |
| } |
| printf("\n"); |
| } |
| |
| void read_mib_counters(int argc, char *argv[]) |
| { |
| printf("===================== %8s %8s %8s %8s %8s %8s %8s\n", |
| "Port0", "Port1", "Port2", "Port3", "Port4", "Port5", "Port6"); |
| printf("Tx Drop Packet :"); |
| dump_each_port(0x4000); |
| printf("Tx CRC Error :"); |
| dump_each_port(0x4004); |
| printf("Tx Unicast Packet :"); |
| dump_each_port(0x4008); |
| printf("Tx Multicast Packet :"); |
| dump_each_port(0x400C); |
| printf("Tx Broadcast Packet :"); |
| dump_each_port(0x4010); |
| printf("Tx Collision Event :"); |
| dump_each_port(0x4014); |
| printf("Tx Pause Packet :"); |
| dump_each_port(0x402C); |
| printf("Rx Drop Packet :"); |
| dump_each_port(0x4060); |
| printf("Rx Filtering Packet :"); |
| dump_each_port(0x4064); |
| printf("Rx Unicast Packet :"); |
| dump_each_port(0x4068); |
| printf("Rx Multicast Packet :"); |
| dump_each_port(0x406C); |
| printf("Rx Broadcast Packet :"); |
| dump_each_port(0x4070); |
| printf("Rx Alignment Error :"); |
| dump_each_port(0x4074); |
| printf("Rx CRC Error :"); |
| dump_each_port(0x4078); |
| printf("Rx Undersize Error :"); |
| dump_each_port(0x407C); |
| printf("Rx Fragment Error :"); |
| dump_each_port(0x4080); |
| printf("Rx Oversize Error :"); |
| dump_each_port(0x4084); |
| printf("Rx Jabber Error :"); |
| dump_each_port(0x4088); |
| printf("Rx Pause Packet :"); |
| dump_each_port(0x408C); |
| } |
| |
| void clear_mib_counters(int argc, char *argv[]) |
| { |
| reg_write(0x4fe0, 0xf0); |
| read_mib_counters(argc, argv); |
| reg_write(0x4fe0, 0x800000f0); |
| } |
| |
| void exit_free() |
| { |
| free(attres); |
| attres = NULL; |
| switch_ioctl_fini(); |
| mt753x_netlink_free(); |
| } |