recipes-wifi/wpa-supplicant/files/patches-2.10.3/mtk-0041-mtk-hostapd-refactor-the-flow-to-create-Wide-Bandwid.patch

From 5daee94e29d5d7a3db5b8c8f03b15aa4a914f85f Mon Sep 17 00:00:00 2001
From: Michael-CY Lee <michael-cy.lee@mediatek.com>
Date: Thu, 24 Aug 2023 10:04:15 +0800
Subject: [PATCH 41/54] mtk: hostapd: refactor the flow to create Wide
 Bandwidth Channel Switch IE

This patch changes the flow to create Wide Bandwidth Channel Switch IE:
1. 2 GHz: Wide Bandwidth Channel Switch IE should not present.
2. 5 GHz: fill the subfields according to VHT operation.
3. 6 GHz: fill the subfields according to VHT operation and HE operation
   in HE mode and EHT mode, respectively.
   This is because the definition of the subfields of Wide Bandwidth
   Channel Switch IE is ambiguous:
   1. 802.11ac: the definition of subfields follows VHT operation
      (IEEE80211-2020 9.4.2.160)
   2. 802.11ax: the definition of subfields is not specified
   3. 802.11be: the definition of subfields follows VHT operation in 5
      GHz and HE operation in 6 GHz (IEEE P802.11be D3.2 9.4.2.159)

To support 320 MHz
   channel switch, set width to 4

Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
---
 src/ap/ieee802_11.c | 99 ++++++++++++++++++++++++++++++++++-----------
 1 file changed, 76 insertions(+), 23 deletions(-)

diff --git a/src/ap/ieee802_11.c b/src/ap/ieee802_11.c
index 38fce3e82..d46c5a42b 100644
--- a/src/ap/ieee802_11.c
+++ b/src/ap/ieee802_11.c
@@ -7083,57 +7083,110 @@ u8 * hostapd_eid_txpower_envelope(struct hostapd_data *hapd, u8 *eid)
 
 u8 * hostapd_eid_wb_chsw_wrapper(struct hostapd_data *hapd, u8 *eid)
 {
-	u8 bw, chan1, chan2 = 0;
-	int freq1;
+	u8 new_bw_field, ccfs0_chan, ccfs1_chan = 0;
+	int ccfs0_freq = 0, ccfs1_freq = 0;
+	int control_freq, center_freq1, center_freq2, bandwidth;
+	int base_freq, offset;
+	bool is_6ghz, use_he_oper;
 
 	if (!hapd->cs_freq_params.channel ||
+	    hapd->cs_freq_params.bandwidth == 20 ||
 	    (!hapd->cs_freq_params.vht_enabled &&
 	     !hapd->cs_freq_params.he_enabled &&
 	     !hapd->cs_freq_params.eht_enabled))
 		return eid;
 
-	/* bandwidth: 0: 40, 1: 80, 2: 160, 3: 80+80, 4: 320 */
-	switch (hapd->cs_freq_params.bandwidth) {
+	control_freq = hapd->cs_freq_params.freq;
+	center_freq1 = hapd->cs_freq_params.center_freq1;
+	center_freq2 = hapd->cs_freq_params.center_freq2;
+	bandwidth = hapd->cs_freq_params.bandwidth;
+
+	/* center_freq2 is used if and only if bandwidth is
+	 * 80+80 MHz and phy mode is not EHT
+	 */
+	if (center_freq2 &&
+	    (bandwidth != 80 || hapd->cs_freq_params.eht_enabled))
+		return eid;
+
+	is_6ghz = is_6ghz_freq(control_freq);
+	use_he_oper = is_6ghz && hapd->cs_freq_params.eht_enabled;
+	base_freq = is_6ghz ? 5955 : 5180;
+
+	/* About the subfields of the Wide Bandwidth Channel Switch IE,
+	 * IEEE802.11-2020 9.4.2.160 specifies that the subfields New
+	 * Channel Width, New Channel Center Frequency Segment 0 and New
+	 * Channel Center Frequency Segment 1 have the same definition as
+	 * they are in the VHT operation information field.
+	 * However, the standard does not specify the definition of these
+	 * subfields when it comes to HE phy-mode in 6 GHz.
+	 * And in IEEE P802.11be D3.2 9.4.2.159, it specifies that the
+	 * defition should follow VHT operation in 5 GHz, and follow HE
+	 * oepration in 6 GHz.
+	 * Problem happens here for some HE STAs in 6 GHz, they might still
+	 * use VHT operation to parse these subfields.
+	 *
+	 * Here we follow the new Standard to build the IE, meanwhile we have
+	 * a workaround for HE mode in 6 GHz.
+	 *
+	 * 5 GHz: VHT operation
+	 * HE mode in 6 GHz: VHT operation
+	 * EHT mode in 6 GHz: HE operation
+	 */
+	ccfs0_freq = center_freq1;
+	ccfs1_freq = center_freq2;
+	switch (bandwidth) {
 	case 40:
-		bw = 0;
+		new_bw_field = use_he_oper ? 1 : 0;
 		break;
 	case 80:
-		/* check if it's 80+80 */
-		if (!hapd->cs_freq_params.center_freq2)
-			bw = 1;
+		if (ccfs1_freq)
+			new_bw_field = use_he_oper ? 3 : 1;
 		else
-			bw = 3;
+			new_bw_field = use_he_oper ? 2 : 1;
 		break;
 	case 160:
-		bw = 2;
+		new_bw_field = use_he_oper ? 3 : 1;
+
+		/* ccfs0 is primary 80 MHz
+		 * ccfs1 is center frequency
+		 */
+		offset = (control_freq - base_freq) / 20;
+		ccfs0_freq = control_freq + 30 - (offset & 3) * 20;
+		ccfs1_freq = center_freq1;
 		break;
 	case 320:
-		bw = 4;
+		/* TODO switch to bandwidth 320 MHz should be
+		 * indicated by Bandwidth indication IE.
+		 */
+		new_bw_field = 4;
+
+		/* ccfs0 is primary 160 MHz
+		 * ccfs1 is center frequency
+		 */
+		offset = (control_freq - base_freq) / 20;
+		ccfs0_freq = control_freq + 70 - (offset & 7) * 20;
+		ccfs1_freq = center_freq1;
 		break;
 	default:
-		/* not valid VHT bandwidth or not in CSA */
+		/* not a valid VHT/HE bandwidth or not in CSA */
 		return eid;
 	}
 
-	freq1 = hapd->cs_freq_params.center_freq1 ?
-		hapd->cs_freq_params.center_freq1 :
-		hapd->cs_freq_params.freq;
-	if (ieee80211_freq_to_chan(freq1, &chan1) !=
-	    HOSTAPD_MODE_IEEE80211A)
+	if (ieee80211_freq_to_chan(ccfs0_freq, &ccfs0_chan) !=
+			HOSTAPD_MODE_IEEE80211A)
 		return eid;
 
-	if (hapd->cs_freq_params.center_freq2 &&
-	    ieee80211_freq_to_chan(hapd->cs_freq_params.center_freq2,
-				   &chan2) != HOSTAPD_MODE_IEEE80211A)
+	if (ccfs1_freq && ieee80211_freq_to_chan(ccfs1_freq, &ccfs1_chan) !=
+			HOSTAPD_MODE_IEEE80211A)
 		return eid;
 
 	*eid++ = WLAN_EID_CHANNEL_SWITCH_WRAPPER;
 	*eid++ = 5; /* Length of Channel Switch Wrapper */
 	*eid++ = WLAN_EID_WIDE_BW_CHSWITCH;
 	*eid++ = 3; /* Length of Wide Bandwidth Channel Switch element */
-	*eid++ = bw; /* New Channel Width */
-	*eid++ = chan1; /* New Channel Center Frequency Segment 0 */
-	*eid++ = chan2; /* New Channel Center Frequency Segment 1 */
+	*eid++ = new_bw_field; /* New Channel Width */
+	*eid++ = ccfs0_chan; /* New Channel Center Frequency Segment 0 */
+	*eid++ = ccfs1_chan; /* New Channel Center Frequency Segment 1 */
 
 	return eid;
 }
-- 
2.18.0