Pankaj Gupta | e55f6c4 | 2020-12-09 14:02:39 +0530 | [diff] [blame] | 1 | /* |
| 2 | * Copyright 2021 NXP |
| 3 | * |
| 4 | * SPDX-License-Identifier: BSD-3-Clause |
| 5 | * |
| 6 | */ |
| 7 | |
| 8 | #include <stdbool.h> |
| 9 | #include <stdint.h> |
| 10 | #include <stdio.h> |
| 11 | #include <stdlib.h> |
| 12 | #include <string.h> |
| 13 | |
| 14 | #include <getopt.h> |
| 15 | #include <unistd.h> |
| 16 | |
| 17 | #define NUM_MEM_BLOCK 1 |
| 18 | #define FOUR_BYTE_ALIGN 4 |
| 19 | #define EIGHT_BYTE_ALIGN 8 |
| 20 | #define SIZE_TWO_PBL_CMD 24 |
| 21 | |
| 22 | /* Define for add_boot_ptr_cmd() */ |
| 23 | #define BOOTPTR_ADDR 0x09570604 |
| 24 | #define CSF_ADDR_SB 0x09ee0200 |
| 25 | /* CCSR write command to address 0x1e00400 i.e BOOTLOCPTR */ |
| 26 | #define BOOTPTR_ADDR_CH3 0x31e00400 |
| 27 | /* Load CSF header command */ |
| 28 | #define CSF_ADDR_SB_CH3 0x80220000 |
| 29 | |
| 30 | #define MAND_ARG_MASK 0xFFF3 |
| 31 | #define ARG_INIT_MASK 0xFF00 |
| 32 | #define RCW_FILE_NAME_ARG_MASK 0x0080 |
| 33 | #define IN_FILE_NAME_ARG_MASK 0x0040 |
| 34 | #define CHASSIS_ARG_MASK 0x0020 |
| 35 | #define BOOT_SRC_ARG_MASK 0x0010 |
| 36 | #define ENTRY_POINT_ADDR_ARG_MASK 0x0008 |
| 37 | #define BL2_BIN_STRG_LOC_BOOT_SRC_ARG_MASK 0x0004 |
| 38 | #define BL2_BIN_CPY_DEST_ADDR_ARG_MASK 0x0002 |
| 39 | #define OP_FILE_NAME_ARG_MASK 0x0001 |
| 40 | |
| 41 | /* Define for add_cpy_cmd() */ |
| 42 | #define OFFSET_MASK 0x00ffffff |
| 43 | #define WRITE_CMD_BASE 0x81000000 |
| 44 | #define MAX_PBI_DATA_LEN_BYTE 64 |
| 45 | |
| 46 | /* 140 Bytes = Preamble + LOAD RCW command + RCW (128 bytes) + Checksum */ |
| 47 | #define CHS3_CRC_PAYLOAD_START_OFFSET 140 |
| 48 | |
| 49 | #define PBI_CRC_POLYNOMIAL 0x04c11db7 |
| 50 | |
| 51 | typedef enum { |
| 52 | CHASSIS_UNKNOWN, |
| 53 | CHASSIS_2, |
| 54 | CHASSIS_3, |
| 55 | CHASSIS_3_2, |
| 56 | CHASSIS_MAX /* must be last item in list */ |
| 57 | } chassis_t; |
| 58 | |
| 59 | typedef enum { |
| 60 | UNKNOWN_BOOT = 0, |
| 61 | IFC_NOR_BOOT, |
| 62 | IFC_NAND_BOOT, |
| 63 | QSPI_BOOT, |
| 64 | SD_BOOT, |
| 65 | EMMC_BOOT, |
| 66 | FLXSPI_NOR_BOOT, |
| 67 | FLXSPI_NAND_BOOT, |
| 68 | FLXSPI_NAND4K_BOOT, |
| 69 | MAX_BOOT /* must be last item in list */ |
| 70 | } boot_src_t; |
| 71 | |
| 72 | /* Base Addresses where PBL image is copied depending on the boot source. |
| 73 | * Boot address map varies as per Chassis architecture. |
| 74 | */ |
| 75 | #define BASE_ADDR_UNDEFINED 0xFFFFFFFF |
| 76 | #define BASE_ADDR_QSPI 0x20000000 |
| 77 | #define BASE_ADDR_SD 0x00001000 |
| 78 | #define BASE_ADDR_IFC_NOR 0x30000000 |
| 79 | #define BASE_ADDR_EMMC 0x00001000 |
| 80 | #define BASE_ADDR_FLX_NOR 0x20000000 |
| 81 | #define BASE_ADDR_NAND 0x20000000 |
| 82 | |
| 83 | uint32_t base_addr_ch3[MAX_BOOT] = { |
| 84 | BASE_ADDR_UNDEFINED, |
| 85 | BASE_ADDR_IFC_NOR, |
| 86 | BASE_ADDR_UNDEFINED, /*IFC NAND */ |
| 87 | BASE_ADDR_QSPI, |
| 88 | BASE_ADDR_SD, |
| 89 | BASE_ADDR_EMMC, |
| 90 | BASE_ADDR_UNDEFINED, /*FLXSPI NOR */ |
| 91 | BASE_ADDR_UNDEFINED, /*FLXSPI NAND 2K */ |
| 92 | BASE_ADDR_UNDEFINED /*FLXSPI NAND 4K */ |
| 93 | }; |
| 94 | |
| 95 | uint32_t base_addr_ch32[MAX_BOOT] = { |
| 96 | BASE_ADDR_UNDEFINED, |
| 97 | BASE_ADDR_UNDEFINED, /* IFC NOR */ |
| 98 | BASE_ADDR_UNDEFINED, /* IFC NAND */ |
| 99 | BASE_ADDR_UNDEFINED, /* QSPI */ |
| 100 | BASE_ADDR_SD, |
| 101 | BASE_ADDR_EMMC, |
| 102 | BASE_ADDR_FLX_NOR, |
| 103 | BASE_ADDR_UNDEFINED, /*FLXSPI NAND 2K */ |
| 104 | BASE_ADDR_UNDEFINED /*FLXSPI NAND 4K */ |
| 105 | }; |
| 106 | |
| 107 | /* for Chassis 3 */ |
| 108 | uint32_t blk_cpy_hdr_map_ch3[] = { |
| 109 | |
| 110 | 0, /* Unknown Boot Source */ |
| 111 | 0x80000020, /* NOR_BOOT */ |
| 112 | 0x0, /* NAND_BOOT */ |
| 113 | 0x80000062, /* QSPI_BOOT */ |
| 114 | 0x80000040, /* SD_BOOT */ |
| 115 | 0x80000041, /* EMMC_BOOT */ |
| 116 | 0x0, /* FLEXSPI NOR_BOOT */ |
| 117 | 0x0, /* FLEX SPI NAND2K BOOT */ |
| 118 | 0x0, /* CHASIS3_2_NAND4K_BOOT */ |
| 119 | }; |
| 120 | |
| 121 | uint32_t blk_cpy_hdr_map_ch32[] = { |
| 122 | 0, /* Unknown Boot Source */ |
| 123 | 0x0, /* NOR_BOOT */ |
| 124 | 0x0, /* NAND_BOOT */ |
| 125 | 0x0, /* QSPI_BOOT */ |
| 126 | 0x80000008, /* SD_BOOT */ |
| 127 | 0x80000009, /* EMMC_BOOT */ |
| 128 | 0x8000000F, /* FLEXSPI NOR_BOOT */ |
| 129 | 0x8000000C, /* FLEX SPI NAND2K BOOT */ |
| 130 | 0x8000000D, /* CHASIS3_2_NAND4K_BOOT */ |
| 131 | }; |
| 132 | |
| 133 | char *boot_src_string[] = { |
| 134 | "UNKNOWN_BOOT", |
| 135 | "IFC_NOR_BOOT", |
| 136 | "IFC_NAND_BOOT", |
| 137 | "QSPI_BOOT", |
| 138 | "SD_BOOT", |
| 139 | "EMMC_BOOT", |
| 140 | "FLXSPI_NOR_BOOT", |
| 141 | "FLXSPI_NAND_BOOT", |
| 142 | "FLXSPI_NAND4K_BOOT", |
| 143 | }; |
| 144 | |
| 145 | enum stop_command { |
| 146 | STOP_COMMAND = 0, |
| 147 | CRC_STOP_COMMAND |
| 148 | }; |
| 149 | |
| 150 | /* Structure will get populated in the main function |
| 151 | * as part of parsing the command line arguments. |
| 152 | * All member parameters are mandatory except: |
| 153 | * -ep |
| 154 | * -src_addr |
| 155 | */ |
| 156 | struct pbl_image { |
| 157 | char *rcw_nm; /* Input RCW File */ |
| 158 | char *sec_imgnm; /* Input BL2 binary */ |
| 159 | char *imagefile; /* Generated output file */ |
| 160 | boot_src_t boot_src; /* Boot Source - QSPI, SD, NOR, NAND etc */ |
| 161 | uint32_t src_addr; /* Source Address */ |
| 162 | uint32_t addr; /* Load address */ |
| 163 | uint32_t ep; /* Entry point <opt> default is load address */ |
| 164 | chassis_t chassis; /* Chassis type */ |
| 165 | } pblimg; |
| 166 | |
| 167 | #define SUCCESS 0 |
| 168 | #define FAILURE -1 |
| 169 | #define CRC_STOP_CMD_ARM 0x08610040 |
| 170 | #define CRC_STOP_CMD_ARM_CH3 0x808f0000 |
| 171 | #define STOP_CMD_ARM_CH3 0x80ff0000 |
| 172 | #define BYTE_SWAP_32(word) ((((word) & 0xff000000) >> 24)| \ |
| 173 | (((word) & 0x00ff0000) >> 8) | \ |
| 174 | (((word) & 0x0000ff00) << 8) | \ |
| 175 | (((word) & 0x000000ff) << 24)) |
| 176 | |
| 177 | #define PBI_LEN_MASK 0xFFF00000 |
| 178 | #define PBI_LEN_SHIFT 20 |
| 179 | #define NUM_RCW_WORD 35 |
| 180 | #define PBI_LEN_ADD 6 |
| 181 | |
| 182 | #define MAX_CRC_ENTRIES 256 |
| 183 | |
| 184 | /* SoC numeric identifier */ |
| 185 | #define SOC_LS1012 1012 |
| 186 | #define SOC_LS1023 1023 |
| 187 | #define SOC_LS1026 1026 |
| 188 | #define SOC_LS1028 1028 |
| 189 | #define SOC_LS1043 1043 |
| 190 | #define SOC_LS1046 1046 |
| 191 | #define SOC_LS1088 1088 |
| 192 | #define SOC_LS2080 2080 |
| 193 | #define SOC_LS2088 2088 |
| 194 | #define SOC_LX2160 2160 |
| 195 | |
| 196 | static uint32_t pbl_size; |
| 197 | bool sb_flag; |
| 198 | |
| 199 | /*************************************************************************** |
| 200 | * Description : CRC32 Lookup Table |
| 201 | ***************************************************************************/ |
| 202 | static uint32_t crc32_lookup[] = { |
| 203 | 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA, |
| 204 | 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3, |
| 205 | 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988, |
| 206 | 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91, |
| 207 | 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE, |
| 208 | 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7, |
| 209 | 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC, |
| 210 | 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5, |
| 211 | 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172, |
| 212 | 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B, |
| 213 | 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940, |
| 214 | 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59, |
| 215 | 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116, |
| 216 | 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F, |
| 217 | 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924, |
| 218 | 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D, |
| 219 | 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A, |
| 220 | 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433, |
| 221 | 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818, |
| 222 | 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01, |
| 223 | 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E, |
| 224 | 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457, |
| 225 | 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C, |
| 226 | 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65, |
| 227 | 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2, |
| 228 | 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB, |
| 229 | 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0, |
| 230 | 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9, |
| 231 | 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086, |
| 232 | 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F, |
| 233 | 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4, |
| 234 | 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD, |
| 235 | 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A, |
| 236 | 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683, |
| 237 | 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8, |
| 238 | 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1, |
| 239 | 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE, |
| 240 | 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7, |
| 241 | 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC, |
| 242 | 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5, |
| 243 | 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252, |
| 244 | 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B, |
| 245 | 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60, |
| 246 | 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79, |
| 247 | 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236, |
| 248 | 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F, |
| 249 | 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04, |
| 250 | 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D, |
| 251 | 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A, |
| 252 | 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713, |
| 253 | 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38, |
| 254 | 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21, |
| 255 | 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E, |
| 256 | 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777, |
| 257 | 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C, |
| 258 | 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45, |
| 259 | 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2, |
| 260 | 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB, |
| 261 | 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0, |
| 262 | 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9, |
| 263 | 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6, |
| 264 | 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF, |
| 265 | 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94, |
| 266 | 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D |
| 267 | }; |
| 268 | |
| 269 | |
| 270 | static void print_usage(void) |
| 271 | { |
| 272 | printf("\nCorrect Usage of Tool is:\n"); |
| 273 | printf("\n ./create_pbl [options] (mentioned below):\n\n"); |
| 274 | printf("\t-r <RCW file-name> - name of RCW binary file.\n"); |
| 275 | printf("\t-i <BL2 Bin file-name> - file to be added to rcw file.\n"); |
| 276 | printf("\t-c <Number> - Chassis Architecture (=2 or =3\n"); |
| 277 | printf("\t or =4 for 3.2).\n"); |
| 278 | printf("\t-b <qspi/nor/nand/sd> - Boot source.\n"); |
| 279 | printf("\t-d <Address> - Destination address where BL2\n"); |
| 280 | printf("\t image is to be copied\n"); |
| 281 | printf("\t-o <output filename> - Name of PBL image generated\n"); |
| 282 | printf("\t as an output of the tool.\n"); |
| 283 | printf("\t-f <Address> - BL2 image Src Offset\n"); |
| 284 | printf("\t on Boot Source for block copy.\n"); |
| 285 | printf("\t command for chassis >=3.)\n"); |
| 286 | printf("\t-e <Address> - [Optional] Entry Point Address\n"); |
| 287 | printf("\t of the BL2.bin\n"); |
| 288 | printf("\t-s Secure Boot.\n"); |
| 289 | printf("\t-h Help.\n"); |
| 290 | printf("\n\n"); |
| 291 | exit(0); |
| 292 | |
| 293 | } |
| 294 | |
| 295 | /*************************************************************************** |
| 296 | * Function : crypto_calculate_checksum() |
| 297 | * Arguments : data - Pointer to FILE |
| 298 | * num - Number of 32 bit words for checksum |
| 299 | * Return : Checksum Value |
| 300 | * Description : Calculate Checksum over the data |
| 301 | ***************************************************************************/ |
| 302 | uint32_t crypto_calculate_checksum(FILE *fp_rcw_pbi_op, uint32_t num) |
| 303 | { |
| 304 | uint32_t i; |
| 305 | uint64_t sum = 0; |
| 306 | uint32_t word; |
| 307 | |
| 308 | fseek(fp_rcw_pbi_op, 0L, SEEK_SET); |
| 309 | for (i = 0; i < num ; i++) { |
| 310 | if ((fread(&word, sizeof(word), NUM_MEM_BLOCK, fp_rcw_pbi_op)) |
| 311 | < NUM_MEM_BLOCK) { |
| 312 | printf("%s: Error reading word.\n", __func__); |
| 313 | return FAILURE; |
| 314 | } |
| 315 | sum = sum + word; |
| 316 | sum = sum & 0xFFFFFFFF; |
| 317 | } |
| 318 | return (uint32_t)sum; |
| 319 | } |
| 320 | |
| 321 | /*************************************************************************** |
| 322 | * Function : add_pbi_stop_cmd |
| 323 | * Arguments : fp_rcw_pbi_op - output rcw_pbi file pointer |
| 324 | * Return : SUCCESS or FAILURE |
| 325 | * Description : This function insert pbi stop command. |
| 326 | ***************************************************************************/ |
| 327 | int add_pbi_stop_cmd(FILE *fp_rcw_pbi_op, enum stop_command flag) |
| 328 | { |
| 329 | int ret = FAILURE; |
| 330 | int32_t pbi_stop_cmd; |
| 331 | uint32_t pbi_crc = 0xffffffff, i, j, c; |
| 332 | uint32_t crc_table[MAX_CRC_ENTRIES]; |
| 333 | uint8_t data; |
| 334 | |
| 335 | switch (pblimg.chassis) { |
| 336 | case CHASSIS_2: |
| 337 | pbi_stop_cmd = BYTE_SWAP_32(CRC_STOP_CMD_ARM); |
| 338 | break; |
| 339 | case CHASSIS_3: |
| 340 | case CHASSIS_3_2: |
| 341 | /* Based on flag add the corresponsding cmd |
| 342 | * -- stop cmd or stop with CRC cmd |
| 343 | */ |
| 344 | if (flag == CRC_STOP_COMMAND) { |
| 345 | pbi_stop_cmd = CRC_STOP_CMD_ARM_CH3; |
| 346 | } else { |
| 347 | pbi_stop_cmd = STOP_CMD_ARM_CH3; |
| 348 | } |
| 349 | break; |
| 350 | case CHASSIS_UNKNOWN: |
| 351 | case CHASSIS_MAX: |
| 352 | default: |
| 353 | printf("Internal Error: Invalid Chassis val = %d.\n", |
| 354 | pblimg.chassis); |
| 355 | goto pbi_stop_err; |
| 356 | } |
| 357 | |
| 358 | if (fwrite(&pbi_stop_cmd, sizeof(pbi_stop_cmd), NUM_MEM_BLOCK, |
| 359 | fp_rcw_pbi_op) != NUM_MEM_BLOCK) { |
| 360 | printf("%s: Error in Writing PBI STOP CMD\n", __func__); |
| 361 | goto pbi_stop_err; |
| 362 | } |
| 363 | |
| 364 | if (flag == CRC_STOP_COMMAND) { |
| 365 | for (i = 0; i < MAX_CRC_ENTRIES; i++) { |
| 366 | c = i << 24; |
| 367 | for (j = 0; j < 8; j++) { |
| 368 | c = (c & 0x80000000) ? |
| 369 | PBI_CRC_POLYNOMIAL ^ (c << 1) : c << 1; |
| 370 | } |
| 371 | |
| 372 | crc_table[i] = c; |
| 373 | } |
| 374 | } |
| 375 | |
| 376 | switch (pblimg.chassis) { |
| 377 | case CHASSIS_2: |
| 378 | /* Chassis 2: CRC is calculated on RCW + PBL cmd.*/ |
| 379 | fseek(fp_rcw_pbi_op, 0L, SEEK_SET); |
| 380 | break; |
| 381 | case CHASSIS_3: |
| 382 | case CHASSIS_3_2: |
| 383 | /* Chassis 3: CRC is calculated on PBL cmd only. */ |
| 384 | fseek(fp_rcw_pbi_op, CHS3_CRC_PAYLOAD_START_OFFSET, SEEK_SET); |
| 385 | break; |
| 386 | case CHASSIS_UNKNOWN: |
| 387 | case CHASSIS_MAX: |
| 388 | printf("%s: Unknown Chassis.\n", __func__); |
| 389 | goto pbi_stop_err; |
| 390 | } |
| 391 | |
| 392 | while ((fread(&data, sizeof(data), NUM_MEM_BLOCK, fp_rcw_pbi_op)) |
| 393 | == NUM_MEM_BLOCK) { |
| 394 | if (flag == CRC_STOP_COMMAND) { |
| 395 | if (pblimg.chassis == CHASSIS_2) { |
| 396 | pbi_crc = crc_table |
| 397 | [((pbi_crc >> 24) ^ (data)) & 0xff] ^ |
| 398 | (pbi_crc << 8); |
| 399 | } else { |
| 400 | pbi_crc = (pbi_crc >> 8) ^ |
| 401 | crc32_lookup[((pbi_crc) ^ |
| 402 | (data)) & 0xff]; |
| 403 | } |
| 404 | } |
| 405 | } |
| 406 | |
| 407 | switch (pblimg.chassis) { |
| 408 | case CHASSIS_2: |
| 409 | pbi_crc = BYTE_SWAP_32(pbi_crc); |
| 410 | break; |
| 411 | case CHASSIS_3: |
| 412 | case CHASSIS_3_2: |
| 413 | if (flag == CRC_STOP_COMMAND) { |
| 414 | pbi_crc = pbi_crc ^ 0xFFFFFFFF; |
| 415 | } else { |
| 416 | pbi_crc = 0x00000000; |
| 417 | } |
| 418 | break; |
| 419 | case CHASSIS_UNKNOWN: |
| 420 | case CHASSIS_MAX: |
| 421 | printf("%s: Unknown Chassis.\n", __func__); |
| 422 | goto pbi_stop_err; |
| 423 | } |
| 424 | |
| 425 | if (fwrite(&pbi_crc, sizeof(pbi_crc), NUM_MEM_BLOCK, fp_rcw_pbi_op) |
| 426 | != NUM_MEM_BLOCK) { |
| 427 | printf("%s: Error in Writing PBI PBI CRC\n", __func__); |
| 428 | goto pbi_stop_err; |
| 429 | } |
| 430 | ret = SUCCESS; |
| 431 | |
| 432 | pbi_stop_err: |
| 433 | return ret; |
| 434 | } |
| 435 | |
| 436 | /* |
| 437 | * Returns: |
| 438 | * File size in bytes, on Success. |
| 439 | * FAILURE, on failure. |
| 440 | */ |
| 441 | int get_filesize(const char *c) |
| 442 | { |
| 443 | FILE *fp; |
| 444 | int ret = FAILURE; |
| 445 | |
| 446 | fp = fopen(c, "rb"); |
| 447 | if (fp == NULL) { |
| 448 | fprintf(stderr, "%s: Error in opening the file: %s\n", |
| 449 | __func__, c); |
| 450 | goto filesize_err; |
| 451 | } |
| 452 | |
| 453 | fseek(fp, 0L, SEEK_END); |
| 454 | ret = ftell(fp); |
| 455 | fclose(fp); |
| 456 | |
| 457 | filesize_err: |
| 458 | return ret; |
| 459 | } |
| 460 | |
| 461 | /*************************************************************************** |
| 462 | * Function : get_bootptr |
| 463 | * Arguments : fp_rcw_pbi_op - Pointer to output file |
| 464 | * Return : SUCCESS or FAILURE |
| 465 | * Description : Add bootptr pbi command to output file |
| 466 | ***************************************************************************/ |
| 467 | int add_boot_ptr_cmd(FILE *fp_rcw_pbi_op) |
| 468 | { |
| 469 | uint32_t bootptr_addr; |
| 470 | int ret = FAILURE; |
| 471 | |
| 472 | switch (pblimg.chassis) { |
| 473 | case CHASSIS_2: |
| 474 | if (sb_flag == true) |
| 475 | bootptr_addr = BYTE_SWAP_32(CSF_ADDR_SB); |
| 476 | else |
| 477 | bootptr_addr = BYTE_SWAP_32(BOOTPTR_ADDR); |
| 478 | pblimg.ep = BYTE_SWAP_32(pblimg.ep); |
| 479 | break; |
| 480 | case CHASSIS_3: |
| 481 | case CHASSIS_3_2: |
| 482 | if (sb_flag == true) |
| 483 | bootptr_addr = CSF_ADDR_SB_CH3; |
| 484 | else |
| 485 | bootptr_addr = BOOTPTR_ADDR_CH3; |
| 486 | break; |
| 487 | case CHASSIS_UNKNOWN: |
| 488 | case CHASSIS_MAX: |
| 489 | default: |
| 490 | printf("Internal Error: Invalid Chassis val = %d.\n", |
| 491 | pblimg.chassis); |
| 492 | goto bootptr_err; |
| 493 | } |
| 494 | |
| 495 | if (fwrite(&bootptr_addr, sizeof(bootptr_addr), NUM_MEM_BLOCK, |
| 496 | fp_rcw_pbi_op) != NUM_MEM_BLOCK) { |
| 497 | printf("%s: Error in Writing PBI Words:[%d].\n", |
| 498 | __func__, ret); |
| 499 | goto bootptr_err; |
| 500 | } |
| 501 | |
| 502 | if (pblimg.ep != 0) { |
| 503 | if (fwrite(&pblimg.ep, sizeof(pblimg.ep), NUM_MEM_BLOCK, |
| 504 | fp_rcw_pbi_op) != NUM_MEM_BLOCK) { |
| 505 | printf("%s: Error in Writing PBI Words\n", __func__); |
| 506 | goto bootptr_err; |
| 507 | } |
| 508 | } |
| 509 | |
| 510 | printf("\nBoot Location Pointer= %x\n", BYTE_SWAP_32(pblimg.ep)); |
| 511 | ret = SUCCESS; |
| 512 | |
| 513 | bootptr_err: |
| 514 | return ret; |
| 515 | } |
| 516 | |
| 517 | /*************************************************************************** |
| 518 | * Function : add_blk_cpy_cmd |
| 519 | * Arguments : pbi_word - pointer to pbi commands |
| 520 | * args - Command line args flag. |
| 521 | * Return : SUCCESS or FAILURE |
| 522 | * Description : Add pbi commands for block copy cmd in pbi_words |
| 523 | ***************************************************************************/ |
| 524 | int add_blk_cpy_cmd(FILE *fp_rcw_pbi_op, uint16_t args) |
| 525 | { |
| 526 | uint32_t blk_cpy_hdr; |
| 527 | uint32_t file_size, new_file_size; |
| 528 | uint32_t align = 4; |
| 529 | int ret = FAILURE; |
| 530 | int num_pad_bytes = 0; |
| 531 | |
| 532 | if ((args & BL2_BIN_STRG_LOC_BOOT_SRC_ARG_MASK) == 0) { |
| 533 | printf("ERROR: Offset not specified for Block Copy Cmd.\n"); |
| 534 | printf("\tSee Usage and use -f option\n"); |
| 535 | goto blk_copy_err; |
| 536 | } |
| 537 | |
| 538 | switch (pblimg.chassis) { |
| 539 | case CHASSIS_3: |
| 540 | /* Block copy command */ |
| 541 | blk_cpy_hdr = blk_cpy_hdr_map_ch3[pblimg.boot_src]; |
| 542 | pblimg.src_addr += base_addr_ch3[pblimg.boot_src]; |
| 543 | break; |
| 544 | case CHASSIS_3_2: |
| 545 | /* Block copy command */ |
| 546 | blk_cpy_hdr = blk_cpy_hdr_map_ch32[pblimg.boot_src]; |
| 547 | pblimg.src_addr += base_addr_ch32[pblimg.boot_src]; |
| 548 | break; |
| 549 | default: |
| 550 | printf("%s: Error invalid chassis type for this command.\n", |
| 551 | __func__); |
| 552 | goto blk_copy_err; |
| 553 | } |
| 554 | |
| 555 | file_size = get_filesize(pblimg.sec_imgnm); |
| 556 | if (file_size > 0) { |
| 557 | new_file_size = (file_size + (file_size % align)); |
| 558 | |
| 559 | /* Add Block copy command */ |
| 560 | if (fwrite(&blk_cpy_hdr, sizeof(blk_cpy_hdr), NUM_MEM_BLOCK, |
| 561 | fp_rcw_pbi_op) != NUM_MEM_BLOCK) { |
| 562 | printf("%s: Error writing blk_cpy_hdr to the file.\n", |
| 563 | __func__); |
| 564 | goto blk_copy_err; |
| 565 | } |
| 566 | |
| 567 | if ((args & BL2_BIN_STRG_LOC_BOOT_SRC_ARG_MASK) == 0) |
| 568 | num_pad_bytes = pblimg.src_addr % 4; |
| 569 | |
| 570 | /* Add Src address word */ |
| 571 | if (fwrite(&pblimg.src_addr + num_pad_bytes, |
| 572 | sizeof(pblimg.src_addr), NUM_MEM_BLOCK, |
| 573 | fp_rcw_pbi_op) != NUM_MEM_BLOCK) { |
| 574 | printf("%s: Error writing BLK SRC Addr to the file.\n", |
| 575 | __func__); |
| 576 | goto blk_copy_err; |
| 577 | } |
| 578 | |
| 579 | /* Add Dest address word */ |
| 580 | if (fwrite(&pblimg.addr, sizeof(pblimg.addr), |
| 581 | NUM_MEM_BLOCK, fp_rcw_pbi_op) != NUM_MEM_BLOCK) { |
| 582 | printf("%s: Error writing DST Addr to the file.\n", |
| 583 | __func__); |
| 584 | goto blk_copy_err; |
| 585 | } |
| 586 | |
| 587 | /* Add size */ |
| 588 | if (fwrite(&new_file_size, sizeof(new_file_size), |
| 589 | NUM_MEM_BLOCK, fp_rcw_pbi_op) != NUM_MEM_BLOCK) { |
| 590 | printf("%s: Error writing size to the file.\n", |
| 591 | __func__); |
| 592 | goto blk_copy_err; |
| 593 | } |
| 594 | } |
| 595 | |
| 596 | ret = SUCCESS; |
| 597 | |
| 598 | blk_copy_err: |
| 599 | return ret; |
| 600 | } |
| 601 | |
| 602 | /*************************************************************************** |
| 603 | * Function : add_cpy_cmd |
| 604 | * Arguments : pbi_word - pointer to pbi commands |
| 605 | * Return : SUCCESS or FAILURE |
| 606 | * Description : Append pbi commands for copying BL2 image to the |
| 607 | * load address stored in pbl_image.addr |
| 608 | ***************************************************************************/ |
| 609 | int add_cpy_cmd(FILE *fp_rcw_pbi_op) |
| 610 | { |
| 611 | uint32_t ALTCBAR_ADDRESS = BYTE_SWAP_32(0x09570158); |
| 612 | uint32_t WAIT_CMD_WRITE_ADDRESS = BYTE_SWAP_32(0x096100c0); |
| 613 | uint32_t WAIT_CMD = BYTE_SWAP_32(0x000FFFFF); |
| 614 | int file_size; |
| 615 | uint32_t pbi_cmd, altcbar; |
| 616 | uint8_t pbi_data[MAX_PBI_DATA_LEN_BYTE]; |
| 617 | uint32_t dst_offset; |
| 618 | FILE *fp_img = NULL; |
| 619 | int ret = FAILURE; |
| 620 | |
| 621 | altcbar = pblimg.addr; |
| 622 | dst_offset = pblimg.addr; |
| 623 | fp_img = fopen(pblimg.sec_imgnm, "rb"); |
| 624 | if (fp_img == NULL) { |
| 625 | printf("%s: Error in opening the file: %s\n", __func__, |
| 626 | pblimg.sec_imgnm); |
| 627 | goto add_cpy_err; |
| 628 | } |
| 629 | file_size = get_filesize(pblimg.sec_imgnm); |
| 630 | altcbar = 0xfff00000 & altcbar; |
| 631 | altcbar = BYTE_SWAP_32(altcbar >> 16); |
| 632 | if (fwrite(&ALTCBAR_ADDRESS, sizeof(ALTCBAR_ADDRESS), NUM_MEM_BLOCK, |
| 633 | fp_rcw_pbi_op) != NUM_MEM_BLOCK) { |
| 634 | printf("%s: Error in writing address of ALTCFG CMD.\n", |
| 635 | __func__); |
| 636 | goto add_cpy_err; |
| 637 | } |
| 638 | if (fwrite(&altcbar, sizeof(altcbar), NUM_MEM_BLOCK, fp_rcw_pbi_op) |
| 639 | != NUM_MEM_BLOCK) { |
| 640 | printf("%s: Error in writing ALTCFG CMD.\n", __func__); |
| 641 | goto add_cpy_err; |
| 642 | } |
| 643 | if (fwrite(&WAIT_CMD_WRITE_ADDRESS, sizeof(WAIT_CMD_WRITE_ADDRESS), |
| 644 | NUM_MEM_BLOCK, fp_rcw_pbi_op) != NUM_MEM_BLOCK) { |
| 645 | printf("%s: Error in writing address of WAIT_CMD.\n", |
| 646 | __func__); |
| 647 | goto add_cpy_err; |
| 648 | } |
| 649 | if (fwrite(&WAIT_CMD, sizeof(WAIT_CMD), NUM_MEM_BLOCK, fp_rcw_pbi_op) |
| 650 | != NUM_MEM_BLOCK) { |
| 651 | printf("%s: Error in writing WAIT_CMD.\n", __func__); |
| 652 | goto add_cpy_err; |
| 653 | } |
| 654 | do { |
| 655 | memset(pbi_data, 0, MAX_PBI_DATA_LEN_BYTE); |
| 656 | |
| 657 | ret = fread(&pbi_data, MAX_PBI_DATA_LEN_BYTE, |
| 658 | NUM_MEM_BLOCK, fp_img); |
| 659 | if ((ret != NUM_MEM_BLOCK) && (!feof(fp_img))) { |
| 660 | printf("%s: Error writing ALTCFG Word: [%d].\n", |
| 661 | __func__, ret); |
| 662 | goto add_cpy_err; |
| 663 | } |
| 664 | |
| 665 | dst_offset &= OFFSET_MASK; |
| 666 | pbi_cmd = WRITE_CMD_BASE | dst_offset; |
| 667 | pbi_cmd = BYTE_SWAP_32(pbi_cmd); |
| 668 | if (fwrite(&pbi_cmd, sizeof(pbi_cmd), NUM_MEM_BLOCK, |
| 669 | fp_rcw_pbi_op) != NUM_MEM_BLOCK) { |
| 670 | printf("%s: Error writing ALTCFG Word write cmd.\n", |
| 671 | __func__); |
| 672 | goto add_cpy_err; |
| 673 | } |
| 674 | if (fwrite(&pbi_data, MAX_PBI_DATA_LEN_BYTE, NUM_MEM_BLOCK, |
| 675 | fp_rcw_pbi_op) != NUM_MEM_BLOCK) { |
| 676 | printf("%s: Error writing ALTCFG_Word.\n", __func__); |
| 677 | goto add_cpy_err; |
| 678 | } |
| 679 | dst_offset += MAX_PBI_DATA_LEN_BYTE; |
| 680 | file_size -= MAX_PBI_DATA_LEN_BYTE; |
| 681 | } while (!feof(fp_img)); |
| 682 | |
| 683 | ret = SUCCESS; |
| 684 | |
| 685 | add_cpy_err: |
| 686 | if (fp_img != NULL) { |
| 687 | fclose(fp_img); |
| 688 | } |
| 689 | return ret; |
| 690 | } |
| 691 | |
| 692 | int main(int argc, char **argv) |
| 693 | { |
| 694 | FILE *file = NULL; |
| 695 | char *ptr; |
| 696 | int opt; |
| 697 | int tmp; |
| 698 | uint16_t args = ARG_INIT_MASK; |
| 699 | FILE *fp_rcw_pbi_ip = NULL, *fp_rcw_pbi_op = NULL; |
| 700 | uint32_t word, word_1; |
| 701 | int ret = FAILURE; |
| 702 | bool bootptr_flag = false; |
| 703 | enum stop_command flag_stop_cmd = CRC_STOP_COMMAND; |
| 704 | |
| 705 | /* Initializing the global structure to zero. */ |
| 706 | memset(&pblimg, 0x0, sizeof(struct pbl_image)); |
| 707 | |
| 708 | while ((opt = getopt(argc, argv, |
| 709 | ":b:f:r:i:e:d:c:o:h:s")) != -1) { |
| 710 | switch (opt) { |
| 711 | case 'd': |
| 712 | pblimg.addr = strtoull(optarg, &ptr, 16); |
| 713 | if (*ptr != 0) { |
| 714 | fprintf(stderr, "CMD Error: invalid load or destination address %s\n", optarg); |
| 715 | goto exit_main; |
| 716 | } |
| 717 | args |= BL2_BIN_CPY_DEST_ADDR_ARG_MASK; |
| 718 | break; |
| 719 | case 'r': |
| 720 | pblimg.rcw_nm = optarg; |
| 721 | file = fopen(pblimg.rcw_nm, "r"); |
| 722 | if (file == NULL) { |
| 723 | printf("CMD Error: Opening the RCW File.\n"); |
| 724 | goto exit_main; |
| 725 | } else { |
| 726 | args |= RCW_FILE_NAME_ARG_MASK; |
| 727 | fclose(file); |
| 728 | } |
| 729 | break; |
| 730 | case 'e': |
| 731 | bootptr_flag = true; |
| 732 | pblimg.ep = strtoull(optarg, &ptr, 16); |
| 733 | if (*ptr != 0) { |
| 734 | fprintf(stderr, |
| 735 | "CMD Error: Invalid entry point %s\n", optarg); |
| 736 | goto exit_main; |
| 737 | } |
| 738 | break; |
| 739 | case 'h': |
| 740 | print_usage(); |
| 741 | break; |
| 742 | case 'i': |
| 743 | pblimg.sec_imgnm = optarg; |
| 744 | file = fopen(pblimg.sec_imgnm, "r"); |
| 745 | if (file == NULL) { |
| 746 | printf("CMD Error: Opening Input file.\n"); |
| 747 | goto exit_main; |
| 748 | } else { |
| 749 | args |= IN_FILE_NAME_ARG_MASK; |
| 750 | fclose(file); |
| 751 | } |
| 752 | break; |
| 753 | case 'c': |
| 754 | tmp = atoi(optarg); |
| 755 | switch (tmp) { |
| 756 | case SOC_LS1012: |
| 757 | case SOC_LS1023: |
| 758 | case SOC_LS1026: |
| 759 | case SOC_LS1043: |
| 760 | case SOC_LS1046: |
| 761 | pblimg.chassis = CHASSIS_2; |
| 762 | break; |
| 763 | case SOC_LS1088: |
| 764 | case SOC_LS2080: |
| 765 | case SOC_LS2088: |
| 766 | pblimg.chassis = CHASSIS_3; |
| 767 | break; |
| 768 | case SOC_LS1028: |
| 769 | case SOC_LX2160: |
| 770 | pblimg.chassis = CHASSIS_3_2; |
| 771 | break; |
| 772 | default: |
| 773 | printf("CMD Error: Invalid SoC Val = %d.\n", tmp); |
| 774 | goto exit_main; |
| 775 | } |
| 776 | |
| 777 | args |= CHASSIS_ARG_MASK; |
| 778 | break; |
| 779 | case 'o': |
| 780 | pblimg.imagefile = optarg; |
| 781 | args |= OP_FILE_NAME_ARG_MASK; |
| 782 | break; |
| 783 | case 's': |
| 784 | sb_flag = true; |
| 785 | break; |
| 786 | case 'b': |
| 787 | if (strcmp(optarg, "qspi") == 0) { |
| 788 | pblimg.boot_src = QSPI_BOOT; |
| 789 | } else if (strcmp(optarg, "nor") == 0) { |
| 790 | pblimg.boot_src = IFC_NOR_BOOT; |
| 791 | } else if (strcmp(optarg, "nand") == 0) { |
| 792 | pblimg.boot_src = IFC_NAND_BOOT; |
| 793 | } else if (strcmp(optarg, "sd") == 0) { |
| 794 | pblimg.boot_src = SD_BOOT; |
| 795 | } else if (strcmp(optarg, "emmc") == 0) { |
| 796 | pblimg.boot_src = EMMC_BOOT; |
| 797 | } else if (strcmp(optarg, "flexspi_nor") == 0) { |
| 798 | pblimg.boot_src = FLXSPI_NOR_BOOT; |
| 799 | } else if (strcmp(optarg, "flexspi_nand") == 0) { |
| 800 | pblimg.boot_src = FLXSPI_NAND_BOOT; |
| 801 | } else if (strcmp(optarg, "flexspi_nand2k") == 0) { |
| 802 | pblimg.boot_src = FLXSPI_NAND4K_BOOT; |
| 803 | } else { |
| 804 | printf("CMD Error: Invalid boot source.\n"); |
| 805 | goto exit_main; |
| 806 | } |
| 807 | args |= BOOT_SRC_ARG_MASK; |
| 808 | break; |
| 809 | case 'f': |
| 810 | pblimg.src_addr = strtoull(optarg, &ptr, 16); |
| 811 | if (*ptr != 0) { |
| 812 | fprintf(stderr, |
| 813 | "CMD Error: Invalid src offset %s\n", optarg); |
| 814 | goto exit_main; |
| 815 | } |
| 816 | args |= BL2_BIN_STRG_LOC_BOOT_SRC_ARG_MASK; |
| 817 | break; |
| 818 | default: |
| 819 | /* issue a warning and skip the unknown arg */ |
| 820 | printf("Cmd Warning: Invalid Arg = %c.\n", opt); |
| 821 | } |
| 822 | } |
| 823 | |
| 824 | if ((args & MAND_ARG_MASK) != MAND_ARG_MASK) { |
| 825 | print_usage(); |
| 826 | } |
| 827 | |
| 828 | fp_rcw_pbi_ip = fopen(pblimg.rcw_nm, "rb"); |
| 829 | if (fp_rcw_pbi_ip == NULL) { |
| 830 | printf("%s: Error in opening the rcw file: %s\n", |
| 831 | __func__, pblimg.rcw_nm); |
| 832 | goto exit_main; |
| 833 | } |
| 834 | |
| 835 | fp_rcw_pbi_op = fopen(pblimg.imagefile, "wb+"); |
| 836 | if (fp_rcw_pbi_op == NULL) { |
| 837 | printf("%s: Error opening the input file: %s\n", |
| 838 | __func__, pblimg.imagefile); |
| 839 | goto exit_main; |
| 840 | } |
| 841 | |
| 842 | printf("\nInput Boot Source: %s\n", boot_src_string[pblimg.boot_src]); |
| 843 | printf("Input RCW File: %s\n", pblimg.rcw_nm); |
| 844 | printf("Input BL2 Binary File: %s\n", pblimg.sec_imgnm); |
| 845 | printf("Input load address for BL2 Binary File: 0x%x\n", pblimg.addr); |
| 846 | |
| 847 | printf("Chassis Type: %d\n", pblimg.chassis); |
| 848 | switch (pblimg.chassis) { |
| 849 | case CHASSIS_2: |
| 850 | if (fread(&word, sizeof(word), NUM_MEM_BLOCK, fp_rcw_pbi_ip) |
| 851 | != NUM_MEM_BLOCK) { |
| 852 | printf("%s: Error in reading word from the rcw file.\n", |
| 853 | __func__); |
| 854 | goto exit_main; |
| 855 | } |
| 856 | while (BYTE_SWAP_32(word) != 0x08610040) { |
| 857 | if (BYTE_SWAP_32(word) == 0x09550000 |
| 858 | || BYTE_SWAP_32(word) == 0x000f400c) { |
| 859 | break; |
| 860 | } |
| 861 | if (fwrite(&word, sizeof(word), NUM_MEM_BLOCK, |
| 862 | fp_rcw_pbi_op) != NUM_MEM_BLOCK) { |
| 863 | printf("%s: [CH2] Error in Writing PBI Words\n", |
| 864 | __func__); |
| 865 | goto exit_main; |
| 866 | } |
| 867 | if (fread(&word, sizeof(word), NUM_MEM_BLOCK, |
| 868 | fp_rcw_pbi_ip) != NUM_MEM_BLOCK) { |
| 869 | printf("%s: [CH2] Error in Reading PBI Words\n", |
| 870 | __func__); |
| 871 | goto exit_main; |
| 872 | } |
| 873 | } |
| 874 | |
| 875 | if (bootptr_flag == true) { |
| 876 | /* Add command to set boot_loc ptr */ |
| 877 | ret = add_boot_ptr_cmd(fp_rcw_pbi_op); |
| 878 | if (ret != SUCCESS) { |
| 879 | goto exit_main; |
| 880 | } |
| 881 | } |
| 882 | |
| 883 | /* Write acs write commands to output file */ |
| 884 | ret = add_cpy_cmd(fp_rcw_pbi_op); |
| 885 | if (ret != SUCCESS) { |
| 886 | goto exit_main; |
| 887 | } |
| 888 | |
| 889 | /* Add stop command after adding pbi commands |
| 890 | * For Chasis 2.0 platforms it is always CRC & |
| 891 | * Stop command |
| 892 | */ |
| 893 | flag_stop_cmd = CRC_STOP_COMMAND; |
| 894 | ret = add_pbi_stop_cmd(fp_rcw_pbi_op, flag_stop_cmd); |
| 895 | if (ret != SUCCESS) { |
| 896 | goto exit_main; |
| 897 | } |
| 898 | |
| 899 | break; |
| 900 | |
| 901 | case CHASSIS_3: |
| 902 | case CHASSIS_3_2: |
| 903 | if (fread(&word, sizeof(word), NUM_MEM_BLOCK, fp_rcw_pbi_ip) |
| 904 | != NUM_MEM_BLOCK) { |
| 905 | printf("%s: Error reading PBI Cmd.\n", __func__); |
| 906 | goto exit_main; |
| 907 | } |
| 908 | while (word != 0x808f0000 && word != 0x80ff0000) { |
| 909 | pbl_size++; |
| 910 | /* 11th words in RCW has PBL length. Update it |
| 911 | * with new length. 2 comamnds get added |
| 912 | * Block copy + CCSR Write/CSF header write |
| 913 | */ |
| 914 | if (pbl_size == 11) { |
| 915 | word_1 = (word & PBI_LEN_MASK) |
| 916 | + (PBI_LEN_ADD << 20); |
| 917 | word = word & ~PBI_LEN_MASK; |
| 918 | word = word | word_1; |
| 919 | } |
| 920 | /* Update the CRC command */ |
| 921 | /* Check load command.. |
| 922 | * add a check if command is Stop with CRC |
| 923 | * or stop without checksum |
| 924 | */ |
| 925 | if (pbl_size == 35) { |
| 926 | word = crypto_calculate_checksum(fp_rcw_pbi_op, |
| 927 | NUM_RCW_WORD - 1); |
| 928 | if (word == FAILURE) { |
| 929 | goto exit_main; |
| 930 | } |
| 931 | } |
| 932 | if (fwrite(&word, sizeof(word), NUM_MEM_BLOCK, |
| 933 | fp_rcw_pbi_op) != NUM_MEM_BLOCK) { |
| 934 | printf("%s: [CH3] Error in Writing PBI Words\n", |
| 935 | __func__); |
| 936 | goto exit_main; |
| 937 | } |
| 938 | if (fread(&word, sizeof(word), NUM_MEM_BLOCK, |
| 939 | fp_rcw_pbi_ip) != NUM_MEM_BLOCK) { |
| 940 | printf("%s: [CH3] Error in Reading PBI Words\n", |
| 941 | __func__); |
| 942 | goto exit_main; |
| 943 | } |
| 944 | |
| 945 | if (word == CRC_STOP_CMD_ARM_CH3) { |
| 946 | flag_stop_cmd = CRC_STOP_COMMAND; |
| 947 | } else if (word == STOP_CMD_ARM_CH3) { |
| 948 | flag_stop_cmd = STOP_COMMAND; |
| 949 | } |
| 950 | } |
| 951 | if (bootptr_flag == true) { |
| 952 | /* Add command to set boot_loc ptr */ |
| 953 | ret = add_boot_ptr_cmd(fp_rcw_pbi_op); |
| 954 | if (ret != SUCCESS) { |
| 955 | printf("%s: add_boot_ptr_cmd return failure.\n", |
| 956 | __func__); |
| 957 | goto exit_main; |
| 958 | } |
| 959 | } |
| 960 | |
| 961 | /* Write acs write commands to output file */ |
| 962 | ret = add_blk_cpy_cmd(fp_rcw_pbi_op, args); |
| 963 | if (ret != SUCCESS) { |
| 964 | printf("%s: Function add_blk_cpy_cmd return failure.\n", |
| 965 | __func__); |
| 966 | goto exit_main; |
| 967 | } |
| 968 | |
| 969 | /* Add stop command after adding pbi commands */ |
| 970 | ret = add_pbi_stop_cmd(fp_rcw_pbi_op, flag_stop_cmd); |
| 971 | if (ret != SUCCESS) { |
| 972 | goto exit_main; |
| 973 | } |
| 974 | |
| 975 | break; |
| 976 | |
| 977 | default: |
| 978 | printf("%s: Unknown chassis type.\n", |
| 979 | __func__); |
| 980 | } |
| 981 | |
| 982 | if (ret == SUCCESS) { |
| 983 | printf("Output file successfully created with name: %s\n\n", |
| 984 | pblimg.imagefile); |
| 985 | } |
| 986 | |
| 987 | exit_main: |
| 988 | if (fp_rcw_pbi_op != NULL) { |
| 989 | fclose(fp_rcw_pbi_op); |
| 990 | } |
| 991 | if (fp_rcw_pbi_ip != NULL) { |
| 992 | fclose(fp_rcw_pbi_ip); |
| 993 | } |
| 994 | |
| 995 | return ret; |
| 996 | } |