blob: 2a8daa6527bea63f2b1d00ecbbaf04d0b6d9aa09 [file] [log] [blame]
Sieu Mun Tang8881ad02022-03-07 12:04:59 +08001/*
2 * Copyright (c) 2020-2022, Intel Corporation. All rights reserved.
3 *
4 * SPDX-License-Identifier: BSD-3-Clause
5 */
6
7#include <assert.h>
8#include <arch.h>
9#include <arch_helpers.h>
10#include <common/bl_common.h>
11#include <drivers/arm/gicv2.h>
12#include <drivers/ti/uart/uart_16550.h>
13#include <lib/mmio.h>
14#include <lib/xlat_tables/xlat_tables.h>
15
Boon Khai Ng1e5550b2021-05-21 22:56:37 +080016#include "ccu/ncore_ccu.h"
Sieu Mun Tang8881ad02022-03-07 12:04:59 +080017#include "socfpga_mailbox.h"
18#include "socfpga_private.h"
19
20static entry_point_info_t bl32_image_ep_info;
21static entry_point_info_t bl33_image_ep_info;
22
23entry_point_info_t *bl31_plat_get_next_image_ep_info(uint32_t type)
24{
25 entry_point_info_t *next_image_info;
26
27 next_image_info = (type == NON_SECURE) ?
28 &bl33_image_ep_info : &bl32_image_ep_info;
29
30 /* None of the images on this platform can have 0x0 as the entrypoint */
31 if (next_image_info->pc) {
32 return next_image_info;
33 } else {
34 return NULL;
35 }
36}
37
38void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
39 u_register_t arg2, u_register_t arg3)
40{
41 static console_t console;
42
43 mmio_write_64(PLAT_SEC_ENTRY, 0);
44
45 console_16550_register(PLAT_UART0_BASE, PLAT_UART_CLOCK, PLAT_BAUDRATE,
46 &console);
47 /*
48 * Check params passed from BL31 should not be NULL,
49 */
50 void *from_bl2 = (void *) arg0;
51
52 bl_params_t *params_from_bl2 = (bl_params_t *)from_bl2;
53
54 assert(params_from_bl2 != NULL);
55
56 /*
57 * Copy BL32 (if populated by BL31) and BL33 entry point information.
58 * They are stored in Secure RAM, in BL31's address space.
59 */
60
61 if (params_from_bl2->h.type == PARAM_BL_PARAMS &&
62 params_from_bl2->h.version >= VERSION_2) {
63
64 bl_params_node_t *bl_params = params_from_bl2->head;
65
66 while (bl_params != NULL) {
67 if (bl_params->image_id == BL33_IMAGE_ID)
68 bl33_image_ep_info = *bl_params->ep_info;
69
70 bl_params = bl_params->next_params_info;
71 }
72 } else {
73 struct socfpga_bl31_params *arg_from_bl2 =
74 (struct socfpga_bl31_params *) from_bl2;
75
76 assert(arg_from_bl2->h.type == PARAM_BL31);
77 assert(arg_from_bl2->h.version >= VERSION_1);
78
79 bl32_image_ep_info = *arg_from_bl2->bl32_ep_info;
80 bl33_image_ep_info = *arg_from_bl2->bl33_ep_info;
81 }
82 SET_SECURITY_STATE(bl33_image_ep_info.h.attr, NON_SECURE);
83}
84
85static const interrupt_prop_t s10_interrupt_props[] = {
86 PLAT_INTEL_SOCFPGA_G1S_IRQ_PROPS(GICV2_INTR_GROUP0),
87 PLAT_INTEL_SOCFPGA_G0_IRQ_PROPS(GICV2_INTR_GROUP0)
88};
89
90static unsigned int target_mask_array[PLATFORM_CORE_COUNT];
91
92static const gicv2_driver_data_t plat_gicv2_gic_data = {
93 .gicd_base = PLAT_INTEL_SOCFPGA_GICD_BASE,
94 .gicc_base = PLAT_INTEL_SOCFPGA_GICC_BASE,
95 .interrupt_props = s10_interrupt_props,
96 .interrupt_props_num = ARRAY_SIZE(s10_interrupt_props),
97 .target_masks = target_mask_array,
98 .target_masks_num = ARRAY_SIZE(target_mask_array),
99};
100
101/*******************************************************************************
102 * Perform any BL3-1 platform setup code
103 ******************************************************************************/
104void bl31_platform_setup(void)
105{
106 socfpga_delay_timer_init();
107
108 /* Initialize the gic cpu and distributor interfaces */
109 gicv2_driver_init(&plat_gicv2_gic_data);
110 gicv2_distif_init();
111 gicv2_pcpu_distif_init();
112 gicv2_cpuif_enable();
113
114 /* Signal secondary CPUs to jump to BL31 (BL2 = U-boot SPL) */
115 mmio_write_64(PLAT_CPU_RELEASE_ADDR,
116 (uint64_t)plat_secondary_cpus_bl31_entry);
117
118 mailbox_hps_stage_notify(HPS_EXECUTION_STATE_SSBL);
Boon Khai Ng1e5550b2021-05-21 22:56:37 +0800119
120 ncore_enable_ocram_firewall();
Sieu Mun Tang8881ad02022-03-07 12:04:59 +0800121}
122
123const mmap_region_t plat_dm_mmap[] = {
124 MAP_REGION_FLAT(DRAM_BASE, DRAM_SIZE,
125 MT_MEMORY | MT_RW | MT_NS),
126 MAP_REGION_FLAT(DEVICE1_BASE, DEVICE1_SIZE,
127 MT_DEVICE | MT_RW | MT_NS),
128 MAP_REGION_FLAT(DEVICE2_BASE, DEVICE2_SIZE,
129 MT_DEVICE | MT_RW | MT_SECURE),
130 MAP_REGION_FLAT(OCRAM_BASE, OCRAM_SIZE,
131 MT_NON_CACHEABLE | MT_RW | MT_SECURE),
132 MAP_REGION_FLAT(DEVICE3_BASE, DEVICE3_SIZE,
133 MT_DEVICE | MT_RW | MT_SECURE),
134 MAP_REGION_FLAT(MEM64_BASE, MEM64_SIZE,
135 MT_DEVICE | MT_RW | MT_NS),
136 MAP_REGION_FLAT(DEVICE4_BASE, DEVICE4_SIZE,
137 MT_DEVICE | MT_RW | MT_NS),
138 {0}
139};
140
141/*******************************************************************************
142 * Perform the very early platform specific architectural setup here. At the
143 * moment this is only intializes the mmu in a quick and dirty way.
144 ******************************************************************************/
145void bl31_plat_arch_setup(void)
146{
147 const mmap_region_t bl_regions[] = {
148 MAP_REGION_FLAT(BL31_BASE, BL31_END - BL31_BASE,
149 MT_MEMORY | MT_RW | MT_SECURE),
150 MAP_REGION_FLAT(BL_CODE_BASE, BL_CODE_END - BL_CODE_BASE,
151 MT_CODE | MT_SECURE),
152 MAP_REGION_FLAT(BL_RO_DATA_BASE,
153 BL_RO_DATA_END - BL_RO_DATA_BASE,
154 MT_RO_DATA | MT_SECURE),
155#if USE_COHERENT_MEM
156 MAP_REGION_FLAT(BL_COHERENT_RAM_BASE,
157 BL_COHERENT_RAM_END - BL_COHERENT_RAM_BASE,
158 MT_DEVICE | MT_RW | MT_SECURE),
159#endif
160 {0}
161 };
162
163 setup_page_tables(bl_regions, plat_dm_mmap);
164 enable_mmu_el3(0);
165}