| Jorge Ramirez-Ortiz | a29d9a6 | 2017-06-28 10:11:31 +0200 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved. |
| 3 | * |
| 4 | * SPDX-License-Identifier: BSD-3-Clause |
| 5 | */ |
| 6 | |
| 7 | #ifndef __HI3798cv200_H__ |
| 8 | #define __HI3798cv200_H__ |
| 9 | |
| 10 | /* PL011 */ |
| 11 | #define PL011_UART0_BASE (0xF8B00000) |
| 12 | #define PL011_BAUDRATE (115200) |
| 13 | #define PL011_UART0_CLK_IN_HZ (75000000) |
| 14 | |
| 15 | /* Sys Counter */ |
| 16 | #define SYS_COUNTER_FREQ_IN_TICKS (24000000) |
| 17 | #define SYS_COUNTER_FREQ_IN_MHZ (24) |
| 18 | |
| 19 | /* Timer */ |
| 20 | #define SEC_TIMER0_BASE (0xF8008000) |
| 21 | #define TIMER00_LOAD (SEC_TIMER0_BASE + 0x000) |
| 22 | #define TIMER00_VALUE (SEC_TIMER0_BASE + 0x004) |
| 23 | #define TIMER00_CONTROL (SEC_TIMER0_BASE + 0x008) |
| 24 | #define TIMER00_BGLOAD (SEC_TIMER0_BASE + 0x018) |
| 25 | |
| 26 | #define SEC_TIMER2_BASE (0xF8009000) |
| 27 | #define TIMER20_LOAD (SEC_TIMER2_BASE + 0x000) |
| 28 | #define TIMER20_VALUE (SEC_TIMER2_BASE + 0x004) |
| 29 | #define TIMER20_CONTROL (SEC_TIMER2_BASE + 0x008) |
| 30 | #define TIMER20_BGLOAD (SEC_TIMER2_BASE + 0x018) |
| 31 | |
| 32 | /* GPIO */ |
| Victor Chong | 90f1ba3 | 2017-10-19 16:49:52 +0900 | [diff] [blame] | 33 | #define GPIO_MAX (13) |
| Jorge Ramirez-Ortiz | a29d9a6 | 2017-06-28 10:11:31 +0200 | [diff] [blame] | 34 | #define GPIO_BASE(x) (x != 5 ? \ |
| 35 | 0xf820000 + x * 0x1000 : 0xf8004000) |
| 36 | |
| 37 | /* SCTL */ |
| 38 | #define REG_BASE_SCTL (0xF8000000) |
| 39 | #define REG_SC_GEN12 (0x00B0) |
| 40 | |
| 41 | /* CRG */ |
| 42 | #define REG_BASE_CRG (0xF8A22000) |
| 43 | #define REG_CPU_LP (0x48) |
| 44 | #define REG_CPU_RST (0x50) |
| 45 | #define REG_PERI_CRG39 (0x9C) |
| 46 | #define REG_PERI_CRG40 (0xA0) |
| 47 | |
| 48 | /* MCI */ |
| 49 | #define REG_BASE_MCI (0xF9830000) |
| 50 | #define MCI_CDETECT (0x50) |
| 51 | #define MCI_VERID (0x6C) |
| 52 | #define MCI_VERID_VALUE (0x5342250A) |
| 53 | #define MCI_VERID_VALUE2 (0x5342270A) |
| 54 | |
| 55 | /* EMMC */ |
| 56 | #define REG_EMMC_PERI_CRG REG_PERI_CRG40 |
| 57 | #define REG_SDCARD_PERI_CRG REG_PERI_CRG39 |
| 58 | #define EMMC_CLK_MASK (0x7 << 8) |
| 59 | #define EMMC_SRST_REQ (0x1 << 4) |
| 60 | #define EMMC_CKEN (0x1 << 1) |
| 61 | #define EMMC_BUS_CKEN (0x1 << 0) |
| 62 | #define EMMC_CLK_100M (0 << 8) |
| 63 | #define EMMC_CLK_50M (1 << 8) |
| 64 | #define EMMC_CLK_25M (2 << 8) |
| 65 | |
| 66 | #define EMMC_DESC_SIZE (0xF0000) |
| 67 | #define EMMC_INIT_PARAMS(base) \ |
| 68 | { .bus_width = EMMC_BUS_WIDTH_8, \ |
| 69 | .clk_rate = 25 * 1000 * 1000, \ |
| 70 | .desc_base = (base) - EMMC_DESC_SIZE, \ |
| 71 | .desc_size = EMMC_DESC_SIZE, \ |
| 72 | .flags = EMMC_FLAG_CMD23, \ |
| 73 | .reg_base = REG_BASE_MCI, \ |
| 74 | } |
| 75 | |
| 76 | /* GIC-400 */ |
| 77 | #define GICD_BASE (0xF1001000) |
| 78 | #define GICC_BASE (0xF1002000) |
| 79 | #define GICR_BASE (0xF1000000) |
| 80 | |
| 81 | /* FIQ platform related define */ |
| 82 | #define HISI_IRQ_SEC_SGI_0 8 |
| 83 | #define HISI_IRQ_SEC_SGI_1 9 |
| 84 | #define HISI_IRQ_SEC_SGI_2 10 |
| 85 | #define HISI_IRQ_SEC_SGI_3 11 |
| 86 | #define HISI_IRQ_SEC_SGI_4 12 |
| 87 | #define HISI_IRQ_SEC_SGI_5 13 |
| 88 | #define HISI_IRQ_SEC_SGI_6 14 |
| 89 | #define HISI_IRQ_SEC_SGI_7 15 |
| 90 | #define HISI_IRQ_SEC_PPI_0 29 |
| 91 | #define HISI_IRQ_SEC_TIMER0 60 |
| 92 | #define HISI_IRQ_SEC_TIMER1 50 |
| 93 | #define HISI_IRQ_SEC_TIMER2 52 |
| 94 | #define HISI_IRQ_SEC_TIMER3 88 |
| 95 | #define HISI_IRQ_SEC_AXI 110 |
| 96 | |
| 97 | /* Watchdog */ |
| 98 | #define HISI_WDG0_BASE (0xF8A2C000) |
| 99 | |
| Jiancheng Xue | b88b08a | 2017-08-28 18:55:43 +0800 | [diff] [blame] | 100 | #define HISI_TZPC_BASE (0xF8A80000) |
| 101 | #define HISI_TZPC_SEC_ATTR_CTRL (HISI_TZPC_BASE + 0x10) |
| 102 | |
| Jorge Ramirez-Ortiz | a29d9a6 | 2017-06-28 10:11:31 +0200 | [diff] [blame] | 103 | #endif /* __HI3798cv200_H__ */ |