Gitiles
Code Review Sign In
git01.mediatek.com / filogic / atf / bfff4d9d532fb4fa07be9f325d774e5b23ae30f0 / . / include / drivers / st / stm32_uart.h
blob: 866e1589072e4c10871edf7db9f72448ded572dc [file] [log] [blame]
Nicolas Le Bayondc08ebe2019-09-11 11:46:40 +0200[diff] [blame]1/*
Patrick Delaunay98b4fb82022-03-02 15:29:08 +0100[diff] [blame]2 * Copyright (c) 2021-2022, STMicroelectronics - All Rights Reserved
Nicolas Le Bayondc08ebe2019-09-11 11:46:40 +0200[diff] [blame]3 *
4 * SPDX-License-Identifier: BSD-3-Clause
5 */
6
7#ifndef STM32_UART_H
8#define STM32_UART_H
9
10/* UART word length */
11#define STM32_UART_WORDLENGTH_7B USART_CR1_M1
12#define STM32_UART_WORDLENGTH_8B 0x00000000U
13#define STM32_UART_WORDLENGTH_9B USART_CR1_M0
14
15/* UART number of stop bits */
16#define STM32_UART_STOPBITS_0_5 USART_CR2_STOP_0
17#define STM32_UART_STOPBITS_1 0x00000000U
18#define STM32_UART_STOPBITS_1_5 (USART_CR2_STOP_0 | USART_CR2_STOP_1)
19#define STM32_UART_STOPBITS_2 USART_CR2_STOP_1
20
21/* UART parity */
22#define STM32_UART_PARITY_NONE 0x00000000U
23#define STM32_UART_PARITY_EVEN USART_CR1_PCE
24#define STM32_UART_PARITY_ODD (USART_CR1_PCE | USART_CR1_PS)
25
26/* UART transfer mode */
27#define STM32_UART_MODE_RX USART_CR1_RE
28#define STM32_UART_MODE_TX USART_CR1_TE
29#define STM32_UART_MODE_TX_RX (USART_CR1_TE | USART_CR1_RE)
30
31/* UART hardware flow control */
32#define STM32_UART_HWCONTROL_NONE 0x00000000U
33#define STM32_UART_HWCONTROL_RTS USART_CR3_RTSE
34#define STM32_UART_HWCONTROL_CTS USART_CR3_CTSE
35#define STM32_UART_HWCONTROL_RTS_CTS (USART_CR3_RTSE | USART_CR3_CTSE)
36
Nicolas Le Bayondc08ebe2019-09-11 11:46:40 +0200[diff] [blame]37/* UART prescaler */
38#define STM32_UART_PRESCALER_DIV1 0x00000000U
39#define STM32_UART_PRESCALER_DIV2 0x00000001U
40#define STM32_UART_PRESCALER_DIV4 0x00000002U
41#define STM32_UART_PRESCALER_DIV6 0x00000003U
42#define STM32_UART_PRESCALER_DIV8 0x00000004U
43#define STM32_UART_PRESCALER_DIV10 0x00000005U
44#define STM32_UART_PRESCALER_DIV12 0x00000006U
45#define STM32_UART_PRESCALER_DIV16 0x00000007U
46#define STM32_UART_PRESCALER_DIV32 0x00000008U
47#define STM32_UART_PRESCALER_DIV64 0x00000009U
48#define STM32_UART_PRESCALER_DIV128 0x0000000AU
49#define STM32_UART_PRESCALER_DIV256 0x0000000BU
50#define STM32_UART_PRESCALER_NB 0x0000000CU
51
52/* UART fifo mode */
53#define STM32_UART_FIFOMODE_EN USART_CR1_FIFOEN
54#define STM32_UART_FIFOMODE_DIS 0x00000000U
55
56/* UART TXFIFO threshold level */
57#define STM32_UART_TXFIFO_THRESHOLD_1EIGHTHFULL 0x00000000U
58#define STM32_UART_TXFIFO_THRESHOLD_1QUARTERFUL USART_CR3_TXFTCFG_0
59#define STM32_UART_TXFIFO_THRESHOLD_HALFFULL USART_CR3_TXFTCFG_1
60#define STM32_UART_TXFIFO_THRESHOLD_3QUARTERSFULL (USART_CR3_TXFTCFG_0 | USART_CR3_TXFTCFG_1)
61#define STM32_UART_TXFIFO_THRESHOLD_7EIGHTHFULL USART_CR3_TXFTCFG_2
62#define STM32_UART_TXFIFO_THRESHOLD_EMPTY (USART_CR3_TXFTCFG_2 | USART_CR3_TXFTCFG_0)
63
64/* UART RXFIFO threshold level */
65#define STM32_UART_RXFIFO_THRESHOLD_1EIGHTHFULL 0x00000000U
66#define STM32_UART_RXFIFO_THRESHOLD_1QUARTERFULL USART_CR3_RXFTCFG_0
67#define STM32_UART_RXFIFO_THRESHOLD_HALFFULL USART_CR3_RXFTCFG_1
68#define STM32_UART_RXFIFO_THRESHOLD_3QUARTERSFULL (USART_CR3_RXFTCFG_0 | USART_CR3_RXFTCFG_1)
69#define STM32_UART_RXFIFO_THRESHOLD_7EIGHTHFULL USART_CR3_RXFTCFG_2
70#define STM32_UART_RXFIFO_THRESHOLD_FULL (USART_CR3_RXFTCFG_2 | USART_CR3_RXFTCFG_0)
71
72struct stm32_uart_init_s {
73 uint32_t baud_rate; /*
74 * Configures the UART communication
75 * baud rate.
76 */
77
78 uint32_t word_length; /*
79 * Specifies the number of data bits
80 * transmitted or received in a frame.
81 * This parameter can be a value of
82 * @ref STM32_UART_WORDLENGTH_*.
83 */
84
85 uint32_t stop_bits; /*
86 * Specifies the number of stop bits
87 * transmitted. This parameter can be
88 * a value of @ref STM32_UART_STOPBITS_*.
89 */
90
91 uint32_t parity; /*
92 * Specifies the parity mode.
93 * This parameter can be a value of
94 * @ref STM32_UART_PARITY_*.
95 */
96
97 uint32_t mode; /*
98 * Specifies whether the receive or
99 * transmit mode is enabled or
100 * disabled. This parameter can be a
101 * value of @ref @ref STM32_UART_MODE_*.
102 */
103
104 uint32_t hw_flow_control; /*
105 * Specifies whether the hardware flow
106 * control mode is enabled or
107 * disabled. This parameter can be a
108 * value of @ref STM32_UARTHWCONTROL_*.
109 */
110
Nicolas Le Bayondc08ebe2019-09-11 11:46:40 +0200[diff] [blame]111 uint32_t one_bit_sampling; /*
112 * Specifies whether a single sample
113 * or three samples' majority vote is
114 * selected. This parameter can be 0
115 * or USART_CR3_ONEBIT.
116 */
117
118 uint32_t prescaler; /*
119 * Specifies the prescaler value used
120 * to divide the UART clock source.
121 * This parameter can be a value of
122 * @ref STM32_UART_PRESCALER_*.
123 */
124
125 uint32_t fifo_mode; /*
126 * Specifies if the FIFO mode will be
127 * used. This parameter can be a value
128 * of @ref STM32_UART_FIFOMODE_*.
129 */
130
131 uint32_t tx_fifo_threshold; /*
132 * Specifies the TXFIFO threshold
133 * level. This parameter can be a
134 * value of @ref
135 * STM32_UART_TXFIFO_THRESHOLD_*.
136 */
137
138 uint32_t rx_fifo_threshold; /*
139 * Specifies the RXFIFO threshold
140 * level. This parameter can be a
141 * value of @ref
142 * STM32_UART_RXFIFO_THRESHOLD_*.
143 */
144};
145
146struct stm32_uart_handle_s {
147 uint32_t base;
148 uint32_t rdr_mask;
149};
150
151int stm32_uart_init(struct stm32_uart_handle_s *huart,
152 uintptr_t base_addr,
153 const struct stm32_uart_init_s *init);
154void stm32_uart_stop(uintptr_t base_addr);
155int stm32_uart_putc(struct stm32_uart_handle_s *huart, int c);
156int stm32_uart_flush(struct stm32_uart_handle_s *huart);
157int stm32_uart_getc(struct stm32_uart_handle_s *huart);
158
159#endif /* STM32_UART_H */