| Yann Gautier | d0ca7f4 | 2018-07-13 21:33:09 +0200 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (c) 2016-2018, STMicroelectronics - All Rights Reserved |
| 3 | * |
| 4 | * SPDX-License-Identifier: BSD-3-Clause |
| 5 | */ |
| 6 | |
| Yann Gautier | d0ca7f4 | 2018-07-13 21:33:09 +0200 | [diff] [blame] | 7 | #include <stdbool.h> |
| Antonio Nino Diaz | e0f9063 | 2018-12-14 00:18:21 +0000 | [diff] [blame] | 8 | |
| 9 | #include <common/bl_common.h> |
| 10 | #include <common/debug.h> |
| 11 | #include <drivers/st/stm32_gpio.h> |
| 12 | #include <lib/mmio.h> |
| Yann Gautier | d0ca7f4 | 2018-07-13 21:33:09 +0200 | [diff] [blame] | 13 | |
| 14 | static bool check_gpio(uint32_t bank, uint32_t pin) |
| 15 | { |
| 16 | if (pin > GPIO_PIN_MAX) { |
| 17 | ERROR("%s: wrong pin number (%d)\n", __func__, pin); |
| 18 | return false; |
| 19 | } |
| 20 | |
| 21 | if ((bank > GPIO_BANK_K) && (bank != GPIO_BANK_Z)) { |
| 22 | ERROR("%s: wrong GPIO bank number (%d)\n", __func__, bank); |
| 23 | return false; |
| 24 | } |
| 25 | |
| 26 | return true; |
| 27 | } |
| 28 | |
| 29 | void set_gpio(uint32_t bank, uint32_t pin, uint32_t mode, uint32_t speed, |
| 30 | uint32_t pull, uint32_t alternate) |
| 31 | { |
| 32 | volatile uint32_t bank_address; |
| 33 | |
| 34 | if (!check_gpio(bank, pin)) { |
| 35 | return; |
| 36 | } |
| 37 | |
| 38 | if (bank == GPIO_BANK_Z) { |
| 39 | bank_address = STM32_GPIOZ_BANK; |
| 40 | } else { |
| 41 | bank_address = STM32_GPIOA_BANK + |
| 42 | (bank * STM32_GPIO_BANK_OFFSET); |
| 43 | } |
| 44 | |
| 45 | mmio_clrbits_32(bank_address + GPIO_MODE_OFFSET, |
| 46 | ((uint32_t)GPIO_MODE_MASK << (pin << 1))); |
| 47 | mmio_setbits_32(bank_address + GPIO_MODE_OFFSET, |
| 48 | (mode & ~GPIO_OPEN_DRAIN) << (pin << 1)); |
| 49 | |
| 50 | if ((mode & GPIO_OPEN_DRAIN) != 0U) { |
| 51 | mmio_setbits_32(bank_address + GPIO_TYPE_OFFSET, |
| 52 | BIT(pin)); |
| 53 | } |
| 54 | |
| 55 | mmio_clrbits_32(bank_address + GPIO_SPEED_OFFSET, |
| 56 | ((uint32_t)GPIO_SPEED_MASK << (pin << 1))); |
| 57 | mmio_setbits_32(bank_address + GPIO_SPEED_OFFSET, speed << (pin << 1)); |
| 58 | |
| 59 | mmio_clrbits_32(bank_address + GPIO_PUPD_OFFSET, |
| 60 | ((uint32_t)GPIO_PULL_MASK << (pin << 1))); |
| 61 | mmio_setbits_32(bank_address + GPIO_PUPD_OFFSET, pull << (pin << 1)); |
| 62 | |
| 63 | if (pin < GPIO_ALT_LOWER_LIMIT) { |
| 64 | mmio_clrbits_32(bank_address + GPIO_AFRL_OFFSET, |
| 65 | ((uint32_t)GPIO_ALTERNATE_MASK << (pin << 2))); |
| 66 | mmio_setbits_32(bank_address + GPIO_AFRL_OFFSET, |
| 67 | alternate << (pin << 2)); |
| 68 | } else { |
| 69 | mmio_clrbits_32(bank_address + GPIO_AFRH_OFFSET, |
| 70 | ((uint32_t)GPIO_ALTERNATE_MASK << |
| 71 | ((pin - GPIO_ALT_LOWER_LIMIT) << 2))); |
| 72 | mmio_setbits_32(bank_address + GPIO_AFRH_OFFSET, |
| 73 | alternate << ((pin - GPIO_ALT_LOWER_LIMIT) << |
| 74 | 2)); |
| 75 | } |
| 76 | |
| 77 | VERBOSE("GPIO %u mode set to 0x%x\n", bank, |
| 78 | mmio_read_32(bank_address + GPIO_MODE_OFFSET)); |
| 79 | VERBOSE("GPIO %u speed set to 0x%x\n", bank, |
| 80 | mmio_read_32(bank_address + GPIO_SPEED_OFFSET)); |
| 81 | VERBOSE("GPIO %u mode pull to 0x%x\n", bank, |
| 82 | mmio_read_32(bank_address + GPIO_PUPD_OFFSET)); |
| 83 | VERBOSE("GPIO %u mode alternate low to 0x%x\n", bank, |
| 84 | mmio_read_32(bank_address + GPIO_AFRL_OFFSET)); |
| 85 | VERBOSE("GPIO %u mode alternate high to 0x%x\n", bank, |
| 86 | mmio_read_32(bank_address + GPIO_AFRH_OFFSET)); |
| 87 | } |