Julius Werner | 898a8df | 2019-06-05 12:40:35 -0700 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (c) 2020, Google LLC. All rights reserved. |
| 3 | * |
| 4 | * SPDX-License-Identifier: BSD-3-Clause |
| 5 | */ |
| 6 | |
| 7 | #include <common/debug.h> |
| 8 | #include <drivers/delay_timer.h> |
| 9 | #include <lib/mmio.h> |
| 10 | |
| 11 | #include <spmi_arb.h> |
| 12 | |
| 13 | #define REG_APID_MAP(apid) (0x0C440900 + 4 * i) |
| 14 | #define NUM_APID 0x80 |
| 15 | |
| 16 | #define PPID_MASK (0xfff << 8) |
| 17 | |
| 18 | #define REG_ARB_CMD(apid) (0x0C600000 + 0x10000 * apid) |
| 19 | /* These are opcodes specific to this SPMI arbitrator, *not* SPMI commands. */ |
| 20 | #define OPC_EXT_WRITEL 0 |
| 21 | #define OPC_EXT_READL 1 |
| 22 | |
| 23 | #define REG_ARB_STATUS(apid) (0x0C600008 + 0x10000 * apid) |
| 24 | #define ARB_STATUS_DONE BIT(0) |
| 25 | #define ARB_STATUS_FAILURE BIT(1) |
| 26 | #define ARB_STATUS_DENIED BIT(2) |
| 27 | #define ARB_STATUS_DROPPED BIT(3) |
| 28 | |
| 29 | /* Fake status to report driver errors. */ |
| 30 | #define ARB_FAKE_STATUS_TIMEOUT BIT(8) |
| 31 | |
| 32 | #define REG_ARB_RDATA0(apid) (0x0C600018 + 0x10000 * apid) |
| 33 | #define REG_ARB_WDATA0(apid) (0x0C600010 + 0x10000 * apid) |
| 34 | |
| 35 | static int addr_to_apid(uint32_t addr) |
| 36 | { |
| 37 | unsigned int i; |
| 38 | |
| 39 | for (i = 0U; i < NUM_APID; i++) { |
| 40 | uint32_t reg = mmio_read_32(REG_APID_MAP(i)); |
| 41 | if ((reg != 0U) && ((addr & PPID_MASK) == (reg & PPID_MASK))) { |
| 42 | return i; |
| 43 | } |
| 44 | } |
| 45 | |
| 46 | return -1; |
| 47 | } |
| 48 | |
| 49 | static int wait_for_done(uint16_t apid) |
| 50 | { |
| 51 | unsigned int timeout = 100; |
| 52 | |
| 53 | while (timeout-- != 0U) { |
| 54 | uint32_t status = mmio_read_32(REG_ARB_STATUS(apid)); |
| 55 | if ((status & ARB_STATUS_DONE) != 0U) { |
| 56 | if ((status & ARB_STATUS_FAILURE) != 0U || |
| 57 | (status & ARB_STATUS_DENIED) != 0U || |
| 58 | (status & ARB_STATUS_DROPPED) != 0U) { |
| 59 | return status & 0xff; |
| 60 | } |
| 61 | return 0; |
| 62 | } |
| 63 | mdelay(1); |
| 64 | } |
| 65 | ERROR("SPMI_ARB timeout!\n"); |
| 66 | return ARB_FAKE_STATUS_TIMEOUT; |
| 67 | } |
| 68 | |
| 69 | static void arb_command(uint16_t apid, uint8_t opcode, uint32_t addr, |
| 70 | uint8_t bytes) |
| 71 | { |
| 72 | mmio_write_32(REG_ARB_CMD(apid), (uint32_t)opcode << 27 | |
| 73 | (addr & 0xff) << 4 | (bytes - 1)); |
| 74 | } |
| 75 | |
| 76 | int spmi_arb_read8(uint32_t addr) |
| 77 | { |
| 78 | int apid = addr_to_apid(addr); |
| 79 | |
| 80 | if (apid < 0) { |
| 81 | return apid; |
| 82 | } |
| 83 | |
| 84 | arb_command(apid, OPC_EXT_READL, addr, 1); |
| 85 | |
| 86 | int ret = wait_for_done(apid); |
| 87 | if (ret != 0) { |
| 88 | ERROR("SPMI_ARB read error [0x%x]: 0x%x\n", addr, ret); |
| 89 | return ret; |
| 90 | } |
| 91 | |
| 92 | return mmio_read_32(REG_ARB_RDATA0(apid)) & 0xff; |
| 93 | } |
| 94 | |
| 95 | int spmi_arb_write8(uint32_t addr, uint8_t data) |
| 96 | { |
| 97 | int apid = addr_to_apid(addr); |
| 98 | |
| 99 | if (apid < 0) { |
| 100 | return apid; |
| 101 | } |
| 102 | |
| 103 | mmio_write_32(REG_ARB_WDATA0(apid), data); |
| 104 | arb_command(apid, OPC_EXT_WRITEL, addr, 1); |
| 105 | |
| 106 | int ret = wait_for_done(apid); |
| 107 | if (ret != 0) { |
| 108 | ERROR("SPMI_ARB write error [0x%x] = 0x%x: 0x%x\n", |
| 109 | addr, data, ret); |
| 110 | } |
| 111 | |
| 112 | return ret; |
| 113 | } |