blob: 3d561c76eeebf03fb0dea0030133d86d9402d55f [file] [log] [blame]
Jiafei Pan10357d92022-01-20 17:42:39 +08001/*
2 * Copyright 2018-2022 NXP
3 *
4 * SPDX-License-Identifier: BSD-3-Clause
5 */
6
7#include <assert.h>
8#include <errno.h>
9#include <string.h>
10
11#include <common/debug.h>
12#include <ddr.h>
13#include <lib/utils.h>
14
15#include <errata.h>
16#include <platform_def.h>
17
18#ifdef CONFIG_STATIC_DDR
19const struct ddr_cfg_regs static_1600 = {
20 .cs[0].config = U(0x80010412),
21 .cs[0].bnds = U(0x7F),
22 .sdram_cfg[0] = U(0xE50C0008),
23 .sdram_cfg[1] = U(0x00401010),
24 .sdram_cfg[2] = U(0x1),
25 .timing_cfg[0] = U(0xFA550018),
26 .timing_cfg[1] = U(0xBAB40C52),
27 .timing_cfg[2] = U(0x0048C11C),
28 .timing_cfg[3] = U(0x01111000),
29 .timing_cfg[4] = U(0x00000002),
30 .timing_cfg[5] = U(0x03401400),
31 .timing_cfg[6] = U(0x0),
32 .timing_cfg[7] = U(0x23300000),
33 .timing_cfg[8] = U(0x02116600),
34 .timing_cfg[9] = U(0x0),
35 .dq_map[0] = U(0x0),
36 .dq_map[1] = U(0x0),
37 .dq_map[2] = U(0x0),
38 .dq_map[3] = U(0x0),
39 .sdram_mode[0] = U(0x01010210),
40 .sdram_mode[1] = U(0x0),
41 .sdram_mode[8] = U(0x00000500),
42 .sdram_mode[9] = U(0x04000000),
43 .interval = U(0x18600618),
44 .zq_cntl = U(0x8A090705),
45 .ddr_sr_cntr = U(0x0),
46 .clk_cntl = U(0x2000000),
47 .cdr[0] = U(0x80040000),
48 .cdr[1] = U(0xC1),
49 .wrlvl_cntl[0] = U(0x86550607),
50 .wrlvl_cntl[1] = U(0x07070708),
51 .wrlvl_cntl[2] = U(0x0808088),
52};
53
54long long board_static_ddr(struct ddr_info *priv)
55{
56 memcpy(&priv->ddr_reg, &static_1600, sizeof(static_1600));
57
58 return 0x80000000ULL;
59}
60#else /* ifndef CONFIG_STATIC_DDR */
61static const struct rc_timing rcz[] = {
62 {U(1600), U(8), U(7)},
63 {U(2100), U(8), U(7)},
64 {}
65};
66
67static const struct board_timing ram[] = {
68 {U(0x1f), rcz, U(0x01010101), U(0x01010101)},
69};
70
71int ddr_board_options(struct ddr_info *priv)
72{
73 int ret;
74 struct memctl_opt *popts = &priv->opt;
75
76 ret = cal_board_params(priv, ram, ARRAY_SIZE(ram));
77 if (ret != 0) {
78 return ret;
79 }
80
81 popts->bstopre = 0;
82 popts->half_strength_drive_en = 1;
83 popts->cpo_sample = U(0x46);
84 popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_50ohm);
85 popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_50ohm) |
86 DDR_CDR2_VREF_TRAIN_EN;
87 popts->output_driver_impedance = 1;
88
89 return 0;
90}
91
92/* DDR model number: MT40A512M16JY-083E:B */
93struct dimm_params ddr_raw_timing = {
94 .n_ranks = U(1),
95 .rank_density = ULL(4294967296),
96 .capacity = ULL(4294967296),
97 .primary_sdram_width = U(64),
98 .ec_sdram_width = U(8),
99 .rdimm = U(0),
100 .mirrored_dimm = U(0),
101 .n_row_addr = U(16),
102 .n_col_addr = U(10),
103 .bank_group_bits = U(1),
104 .edc_config = U(2),
105 .burst_lengths_bitmask = U(0x0c),
106 .tckmin_x_ps = 750,
107 .tckmax_ps = 1900,
108 .caslat_x = U(0x0001FFE00),
109 .taa_ps = 13500,
110 .trcd_ps = 13500,
111 .trp_ps = 13500,
112 .tras_ps = 33000,
113 .trc_ps = 46500,
114 .twr_ps = 15000,
115 .trfc1_ps = 350000,
116 .trfc2_ps = 260000,
117 .trfc4_ps = 160000,
118 .tfaw_ps = 30000,
119 .trrds_ps = 5300,
120 .trrdl_ps = 6400,
121 .tccdl_ps = 5355,
122 .refresh_rate_ps = U(7800000),
123 .dq_mapping[0] = U(0x0),
124 .dq_mapping[1] = U(0x0),
125 .dq_mapping[2] = U(0x0),
126 .dq_mapping[3] = U(0x0),
127 .dq_mapping[4] = U(0x0),
128 .dq_mapping_ors = U(0),
129 .rc = U(0x1f),
130};
131
132int ddr_get_ddr_params(struct dimm_params *pdimm, struct ddr_conf *conf)
133{
134 static const char dimm_model[] = "Fixed DDR on board";
135
136 conf->dimm_in_use[0] = 1;
137 memcpy(pdimm, &ddr_raw_timing, sizeof(struct dimm_params));
138 memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1);
139
140 return 1;
141}
142#endif /* ifdef CONFIG_STATIC_DDR */
143
144long long init_ddr(void)
145{
146 int spd_addr[] = {NXP_SPD_EEPROM0};
147 struct ddr_info info;
148 struct sysinfo sys;
149 long long dram_size;
150
151 zeromem(&sys, sizeof(sys));
152 if (get_clocks(&sys)) {
153 ERROR("System clocks are not set\n");
154 assert(0);
155 }
156 debug("platform clock %lu\n", sys.freq_platform);
157 debug("DDR PLL1 %lu\n", sys.freq_ddr_pll0);
158 debug("DDR PLL2 %lu\n", sys.freq_ddr_pll1);
159
160 zeromem(&info, sizeof(struct ddr_info));
161 info.num_ctlrs = 1;
162 info.dimm_on_ctlr = 1;
163 info.clk = get_ddr_freq(&sys, 0);
164 info.spd_addr = spd_addr;
165 info.ddr[0] = (void *)NXP_DDR_ADDR;
166
167 dram_size = dram_init(&info);
168 if (dram_size < 0) {
169 ERROR("DDR init failed.\n");
170 }
171
172#ifdef ERRATA_SOC_A008850
173 erratum_a008850_post();
174#endif
175
176 return dram_size;
177}