plat/renesas/rcar/bl2_secure_setting.c

/*
 * Copyright (c) 2015-2020, Renesas Electronics Corporation. All rights reserved.
 *
 * SPDX-License-Identifier: BSD-3-Clause
 */

#include <lib/mmio.h>
#include <lib/utils_def.h>

#include "axi_registers.h"
#include "lifec_registers.h"
#include "micro_delay.h"

static void lifec_security_setting(void);
static void axi_security_setting(void);

static const struct {
	uint32_t reg;
	uint32_t val;
} lifec[] = {
	/*
	 * LIFEC0 (SECURITY) settings
	 * Security attribute setting for master ports
	 * Bit 0: ARM realtime core (Cortex-R7) master port
	 *        0: Non-Secure
	 */
	{ SEC_SRC, 0x0000001EU },
	/*
	 * Security attribute setting for slave ports 0 to 15
	 *      {SEC_SEL0,              0xFFFFFFFFU},
	 *      {SEC_SEL1,              0xFFFFFFFFU},
	 *	{SEC_SEL2,              0xFFFFFFFFU},
	 * Bit19: AXI-Bus (Main Memory domain AXI) slave ports
	 *        0: registers accessed from secure resource only
	 * Bit 9: DBSC4 register access slave ports.
	 *        0: registers accessed from secure resource only.
	 */
#if (LIFEC_DBSC_PROTECT_ENABLE == 1)
	{ SEC_SEL3, 0xFFF7FDFFU },
#else /* LIFEC_DBSC_PROTECT_ENABLE == 1 */
	{ SEC_SEL3, 0xFFFFFFFFU },
#endif /* LIFEC_DBSC_PROTECT_ENABLE == 1 */
	/*
	 *	{SEC_SEL4,              0xFFFFFFFFU},
	 * Bit 6: Boot ROM slave ports.
	 *        0: registers accessed from secure resource only
	 */
	{ SEC_SEL5, 0xFFFFFFBFU },
	/*
	 * Bit13: SCEG PKA (secure APB) slave ports
	 *        0: registers accessed from secure resource only
	 *        1: Reserved[R-Car E3]
	 * Bit12: SCEG PKA (public APB) slave ports
	 *	  0: registers accessed from secure resource only
	 *	  1: Reserved[R-Car E3]
	 * Bit10: SCEG Secure Core slave ports
	 *	  0: registers accessed from secure resource only
	 */
#if (RCAR_LSI == RCAR_E3) || (RCAR_LSI == RCAR_D3)
	{ SEC_SEL6, 0xFFFFFBFFU },
#else /*  (RCAR_LSI == RCAR_E3) || (RCAR_LSI == RCAR_D3) */
	{ SEC_SEL6, 0xFFFFCBFFU },
#endif /*  (RCAR_LSI == RCAR_E3) || (RCAR_LSI == RCAR_D3) */
	/*
	 *	{SEC_SEL7,              0xFFFFFFFFU},
	 *	{SEC_SEL8,              0xFFFFFFFFU},
	 *	{SEC_SEL9,              0xFFFFFFFFU},
	 *	{SEC_SEL10,             0xFFFFFFFFU},
	 *	{SEC_SEL11,             0xFFFFFFFFU},
	 *	{SEC_SEL12,             0xFFFFFFFFU},
	 * Bit22: RPC slave ports.
	 *	  0: registers accessed from secure resource only.
	 */
#if (RCAR_RPC_HYPERFLASH_LOCKED == 1)
	{ SEC_SEL13, 0xFFBFFFFFU },
#endif /* (RCAR_RPC_HYPERFLASH_LOCKED == 1) */
	/*
	 * Bit27: System Timer (SCMT) slave ports
	 *	  0: registers accessed from secure resource only
	 * Bit26: System Watchdog Timer (SWDT) slave ports
	 *	  0: registers accessed from secure resource only
	 */
	{ SEC_SEL14, 0xF3FFFFFFU },
	/*
	 * Bit13: RST slave ports.
	 *	  0: registers accessed from secure resource only
	 * Bit 7: Life Cycle 0 slave ports
	 *	  0: registers accessed from secure resource only
	 */
	{ SEC_SEL15, 0xFFFFFF3FU },
	/*
	 * Security group 0 attribute setting for master ports 0
	 * Security group 1 attribute setting for master ports 0
	 *	{SEC_GRP0CR0,           0x00000000U},
	 *	{SEC_GRP1CR0,           0x00000000U},
	 * Security group 0 attribute setting for master ports 1
	 * Security group 1 attribute setting for master ports 1
	 *	{SEC_GRP0CR1,           0x00000000U},
	 *	{SEC_GRP1CR1,           0x00000000U},
	 * Security group 0 attribute setting for master ports 2
	 * Security group 1 attribute setting for master ports 2
	 * Bit17: SCEG Secure Core master ports.
	 *	  SecurityGroup3
	 */
	{ SEC_GRP0CR2, 0x00020000U },
	{ SEC_GRP1CR2, 0x00020000U },
	/*
	 * Security group 0 attribute setting for master ports 3
	 * Security group 1 attribute setting for master ports 3
	 *	{SEC_GRP0CR3,           0x00000000U},
	 *	{SEC_GRP1CR3,           0x00000000U},
	 * Security group 0 attribute setting for slave ports 0
	 * Security group 1 attribute setting for slave ports 0
	 *	{SEC_GRP0COND0,         0x00000000U},
	 *	{SEC_GRP1COND0,         0x00000000U},
	 * Security group 0 attribute setting for slave ports 1
	 * Security group 1 attribute setting for slave ports 1
	 *	{SEC_GRP0COND1,         0x00000000U},
	 *	{SEC_GRP1COND1,         0x00000000U},
	 * Security group 0 attribute setting for slave ports 2
	 * Security group 1 attribute setting for slave ports 2
	 *	{SEC_GRP0COND2,         0x00000000U},
	 *	{SEC_GRP1COND2,         0x00000000U},
	 * Security group 0 attribute setting for slave ports 3
	 * Security group 1 attribute setting for slave ports 3
	 * Bit19: AXI-Bus (Main Memory domain AXI) slave ports.
	 *	  SecurityGroup3
	 * Bit 9: DBSC4 register access slave ports.
	 *        SecurityGroup3
	 */
#if (LIFEC_DBSC_PROTECT_ENABLE == 1)
	{ SEC_GRP0COND3, 0x00080200U },
	{ SEC_GRP1COND3, 0x00080200U },
#else /* (LIFEC_DBSC_PROTECT_ENABLE == 1) */
	{ SEC_GRP0COND3, 0x00000000U },
	{ SEC_GRP1COND3, 0x00000000U },
#endif /* (LIFEC_DBSC_PROTECT_ENABLE == 1) */
	/*
	 * Security group 0 attribute setting for slave ports 4
	 * Security group 1 attribute setting for slave ports 4
	 *	{SEC_GRP0COND4,         0x00000000U},
	 *	{SEC_GRP1COND4,         0x00000000U},
	 * Security group 0 attribute setting for slave ports 5
	 * Security group 1 attribute setting for slave ports 5
	 * Bit 6: Boot ROM slave ports
	 *	  SecurityGroup3
	 */
	{ SEC_GRP0COND5, 0x00000040U },
	{ SEC_GRP1COND5, 0x00000040U },
	/*
	 * Security group 0 attribute setting for slave ports 6
	 * Security group 1 attribute setting for slave ports 6
	 * Bit13: SCEG PKA (secure APB) slave ports
	 *	  SecurityGroup3
	 *	  Reserved[R-Car E3]
	 * Bit12: SCEG PKA (public APB) slave ports
	 *	  SecurityGroup3
	 *	  Reserved[R-Car E3]
	 * Bit10: SCEG Secure Core slave ports
	 *	  SecurityGroup3
	 */
#if RCAR_LSI == RCAR_E3
	{ SEC_GRP0COND6, 0x00000400U },
	{ SEC_GRP1COND6, 0x00000400U },
#else /* RCAR_LSI == RCAR_E3 */
	{ SEC_GRP0COND6, 0x00003400U },
	{ SEC_GRP1COND6, 0x00003400U },
#endif /* RCAR_LSI == RCAR_E3 */
	/*
	 * Security group 0 attribute setting for slave ports 7
	 * Security group 1 attribute setting for slave ports 7
	 *	{SEC_GRP0COND7,         0x00000000U},
	 *	{SEC_GRP1COND7,         0x00000000U},
	 * Security group 0 attribute setting for slave ports 8
	 * Security group 1 attribute setting for slave ports 8
	 *	{SEC_GRP0COND8,         0x00000000U},
	 *	{SEC_GRP1COND8,         0x00000000U},
	 * Security group 0 attribute setting for slave ports 9
	 * Security group 1 attribute setting for slave ports 9
	 *	{SEC_GRP0COND9,         0x00000000U},
	 *	{SEC_GRP1COND9,         0x00000000U},
	 * Security group 0 attribute setting for slave ports 10
	 * Security group 1 attribute setting for slave ports 10
	 *	{SEC_GRP0COND10,        0x00000000U},
	 *	{SEC_GRP1COND10,        0x00000000U},
	 * Security group 0 attribute setting for slave ports 11
	 * Security group 1 attribute setting for slave ports 11
	 *	{SEC_GRP0COND11,        0x00000000U},
	 *	{SEC_GRP1COND11,        0x00000000U},
	 * Security group 0 attribute setting for slave ports 12
	 * Security group 1 attribute setting for slave ports 12
	 *	{SEC_GRP0COND12,        0x00000000U},
	 *	{SEC_GRP1COND12,        0x00000000U},
	 * Security group 0 attribute setting for slave ports 13
	 * Security group 1 attribute setting for slave ports 13
	 * Bit22: RPC slave ports.
	 *	  SecurityGroup3
	 */
#if (RCAR_RPC_HYPERFLASH_LOCKED == 1)
	    { SEC_GRP0COND13,     0x00400000U },
	    { SEC_GRP1COND13,     0x00400000U },
#endif /* (RCAR_RPC_HYPERFLASH_LOCKED == 1) */
	/*
	 * Security group 0 attribute setting for slave ports 14
	 * Security group 1 attribute setting for slave ports 14
	 * Bit26: System Timer (SCMT) slave ports
	 *	  SecurityGroup3
	 * Bit27: System Watchdog Timer (SWDT) slave ports
	 *	  SecurityGroup3
	 */
	{ SEC_GRP0COND14, 0x0C000000U },
	{ SEC_GRP1COND14, 0x0C000000U },
	/*
	 * Security group 0 attribute setting for slave ports 15
	 * Security group 1 attribute setting for slave ports 15
	 * Bit13: RST slave ports
	 *	  SecurityGroup3
	 * Bit 7: Life Cycle 0 slave ports
	 *	  SecurityGroup3
	 * Bit 6: TDBG slave ports
	 *	  SecurityGroup3
	 */
	{ SEC_GRP0COND15, 0x000000C0U },
	{ SEC_GRP1COND15, 0x000000C0U },
	/*
	 * Security write protection attribute setting slave ports 0
	 *	{SEC_READONLY0,         0x00000000U},
	 * Security write protection attribute setting slave ports 1
	 *	{SEC_READONLY1,         0x00000000U},
	 * Security write protection attribute setting slave ports 2
	 *	{SEC_READONLY2,         0x00000000U},
	 * Security write protection attribute setting slave ports 3
	 *	{SEC_READONLY3,         0x00000000U},
	 * Security write protection attribute setting slave ports 4
	 *	{SEC_READONLY4,         0x00000000U},
	 * Security write protection attribute setting slave ports 5
	 *	{SEC_READONLY5,         0x00000000U},
	 * Security write protection attribute setting slave ports 6
	 *	{SEC_READONLY6,         0x00000000U},
	 * Security write protection attribute setting slave ports 7
	 *	{SEC_READONLY7,         0x00000000U},
	 * Security write protection attribute setting slave ports 8
	 *	{SEC_READONLY8,         0x00000000U},
	 * Security write protection attribute setting slave ports 9
	 *	{SEC_READONLY9,         0x00000000U},
	 * Security write protection attribute setting slave ports 10
	 *	{SEC_READONLY10,        0x00000000U},
	 * Security write protection attribute setting slave ports 11
	 *	{SEC_READONLY11,        0x00000000U},
	 * Security write protection attribute setting slave ports 12
	 *	{SEC_READONLY12,        0x00000000U},
	 * Security write protection attribute setting slave ports 13
	 *	{SEC_READONLY13,        0x00000000U},
	 * Security write protection attribute setting slave ports 14
	 *	{SEC_READONLY14,        0x00000000U},
	 * Security write protection attribute setting slave ports 15
	 *	{SEC_READONLY15,        0x00000000U}
	 */
};

/* AXI settings */
static const struct {
	uint32_t reg;
	uint32_t val;
} axi[] = {
	/*
	 * DRAM protection
	 * AXI dram protected area division
	 */
	{AXI_DPTDIVCR0,  0x0E0403F0U},
	{AXI_DPTDIVCR1,  0x0E0407E0U},
	{AXI_DPTDIVCR2,  0x0E080000U},
	{AXI_DPTDIVCR3,  0x0E080000U},
	{AXI_DPTDIVCR4,  0x0E080000U},
	{AXI_DPTDIVCR5,  0x0E080000U},
	{AXI_DPTDIVCR6,  0x0E080000U},
	{AXI_DPTDIVCR7,  0x0E080000U},
	{AXI_DPTDIVCR8,  0x0E080000U},
	{AXI_DPTDIVCR9,  0x0E080000U},
	{AXI_DPTDIVCR10, 0x0E080000U},
	{AXI_DPTDIVCR11, 0x0E080000U},
	{AXI_DPTDIVCR12, 0x0E080000U},
	{AXI_DPTDIVCR13, 0x0E080000U},
	{AXI_DPTDIVCR14, 0x0E080000U},
	/* AXI dram protected area setting */
	{AXI_DPTCR0,  0x0E000000U},
	{AXI_DPTCR1,  0x0E000E0EU},
	{AXI_DPTCR2,  0x0E000000U},
	{AXI_DPTCR3,  0x0E000000U},
	{AXI_DPTCR4,  0x0E000000U},
	{AXI_DPTCR5,  0x0E000000U},
	{AXI_DPTCR6,  0x0E000000U},
	{AXI_DPTCR7,  0x0E000000U},
	{AXI_DPTCR8,  0x0E000000U},
	{AXI_DPTCR9,  0x0E000000U},
	{AXI_DPTCR10, 0x0E000000U},
	{AXI_DPTCR11, 0x0E000000U},
	{AXI_DPTCR12, 0x0E000000U},
	{AXI_DPTCR13, 0x0E000000U},
	{AXI_DPTCR14, 0x0E000000U},
	{AXI_DPTCR15, 0x0E000000U},
	/*
	 * SRAM ptotection
	 * AXI sram protected area division
	 */
	{AXI_SPTDIVCR0,  0x0E0E6304U},
	{AXI_SPTDIVCR1,  0x0E0E6360U},
	{AXI_SPTDIVCR2,  0x0E0E6360U},
	{AXI_SPTDIVCR3,  0x0E0E6360U},
	{AXI_SPTDIVCR4,  0x0E0E6360U},
	{AXI_SPTDIVCR5,  0x0E0E6360U},
	{AXI_SPTDIVCR6,  0x0E0E6360U},
	{AXI_SPTDIVCR7,  0x0E0E6360U},
	{AXI_SPTDIVCR8,  0x0E0E6360U},
	{AXI_SPTDIVCR9,  0x0E0E6360U},
	{AXI_SPTDIVCR10, 0x0E0E6360U},
	{AXI_SPTDIVCR11, 0x0E0E6360U},
	{AXI_SPTDIVCR12, 0x0E0E6360U},
	{AXI_SPTDIVCR13, 0x0E0E6360U},
	{AXI_SPTDIVCR14, 0x0E0E6360U},
	/* AXI sram protected area setting */
	{AXI_SPTCR0,  0x0E000E0EU},
	{AXI_SPTCR1,  0x0E000000U},
	{AXI_SPTCR2,  0x0E000000U},
	{AXI_SPTCR3,  0x0E000000U},
	{AXI_SPTCR4,  0x0E000000U},
	{AXI_SPTCR5,  0x0E000000U},
	{AXI_SPTCR6,  0x0E000000U},
	{AXI_SPTCR7,  0x0E000000U},
	{AXI_SPTCR8,  0x0E000000U},
	{AXI_SPTCR9,  0x0E000000U},
	{AXI_SPTCR10, 0x0E000000U},
	{AXI_SPTCR11, 0x0E000000U},
	{AXI_SPTCR12, 0x0E000000U},
	{AXI_SPTCR13, 0x0E000000U},
	{AXI_SPTCR14, 0x0E000000U},
	{AXI_SPTCR15, 0x0E000000U}
};

static void lifec_security_setting(void)
{
	uint32_t i;

	for (i = 0; i < ARRAY_SIZE(lifec); i++)
		mmio_write_32(lifec[i].reg, lifec[i].val);
}

/* SRAM/DRAM protection setting */
static void axi_security_setting(void)
{
	uint32_t i;

	for (i = 0; i < ARRAY_SIZE(axi); i++)
		mmio_write_32(axi[i].reg, axi[i].val);
}

void bl2_secure_setting(void)
{
	lifec_security_setting();
	axi_security_setting();
	rcar_micro_delay(10U);
}