blob: 491fd5cfcd27d8533b3555c3156cd921b7aa61fd [file] [log] [blame]
Achin Gupta4f6ad662013-10-25 09:08:21 +01001/*
Dan Handleye83b0ca2014-01-14 18:17:09 +00002 * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
Achin Gupta4f6ad662013-10-25 09:08:21 +01003 *
4 * Redistribution and use in source and binary forms, with or without
5 * modification, are permitted provided that the following conditions are met:
6 *
7 * Redistributions of source code must retain the above copyright notice, this
8 * list of conditions and the following disclaimer.
9 *
10 * Redistributions in binary form must reproduce the above copyright notice,
11 * this list of conditions and the following disclaimer in the documentation
12 * and/or other materials provided with the distribution.
13 *
14 * Neither the name of ARM nor the names of its contributors may be used
15 * to endorse or promote products derived from this software without specific
16 * prior written permission.
17 *
18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
19 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
22 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
23 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
24 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
25 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
26 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
27 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
28 * POSSIBILITY OF SUCH DAMAGE.
29 */
30
Dan Handley2bd4ef22014-04-09 13:14:54 +010031#include <arch.h>
Achin Gupta4f6ad662013-10-25 09:08:21 +010032#include <arch_helpers.h>
Dan Handley2bd4ef22014-04-09 13:14:54 +010033#include <assert.h>
Juan Castillod227d8b2015-01-07 13:49:59 +000034#include <auth.h>
Dan Handley2bd4ef22014-04-09 13:14:54 +010035#include <bl_common.h>
Vikram Kanigirida567432014-04-15 18:08:08 +010036#include <debug.h>
Dan Handley2bd4ef22014-04-09 13:14:54 +010037#include <platform.h>
Dan Handleyed6ff952014-05-14 17:44:19 +010038#include <platform_def.h>
Dan Handleybcd60ba2014-04-17 18:53:42 +010039#include "bl1_private.h"
Achin Gupta4f6ad662013-10-25 09:08:21 +010040
41/*******************************************************************************
Vikram Kanigiria3a5e4a2014-05-15 18:27:15 +010042 * Runs BL2 from the given entry point. It results in dropping the
43 * exception level
44 ******************************************************************************/
Vikram Kanigirida567432014-04-15 18:08:08 +010045static void __dead2 bl1_run_bl2(entry_point_info_t *bl2_ep)
Vikram Kanigiria3a5e4a2014-05-15 18:27:15 +010046{
47 bl1_arch_next_el_setup();
48
49 /* Tell next EL what we want done */
50 bl2_ep->args.arg0 = RUN_IMAGE;
51
Vikram Kanigirida567432014-04-15 18:08:08 +010052 if (GET_SECURITY_STATE(bl2_ep->h.attr) == NON_SECURE)
53 change_security_state(GET_SECURITY_STATE(bl2_ep->h.attr));
Vikram Kanigiria3a5e4a2014-05-15 18:27:15 +010054
55 write_spsr_el3(bl2_ep->spsr);
Vikram Kanigirida567432014-04-15 18:08:08 +010056 write_elr_el3(bl2_ep->pc);
Vikram Kanigiria3a5e4a2014-05-15 18:27:15 +010057
58 eret(bl2_ep->args.arg0,
59 bl2_ep->args.arg1,
60 bl2_ep->args.arg2,
61 bl2_ep->args.arg3,
62 bl2_ep->args.arg4,
63 bl2_ep->args.arg5,
64 bl2_ep->args.arg6,
65 bl2_ep->args.arg7);
66}
67
Sandrine Bailleux467d0572014-06-24 14:02:34 +010068/*******************************************************************************
69 * The next function has a weak definition. Platform specific code can override
70 * it if it wishes to.
71 ******************************************************************************/
72#pragma weak bl1_init_bl2_mem_layout
Vikram Kanigiria3a5e4a2014-05-15 18:27:15 +010073
74/*******************************************************************************
Sandrine Bailleux467d0572014-06-24 14:02:34 +010075 * Function that takes a memory layout into which BL2 has been loaded and
76 * populates a new memory layout for BL2 that ensures that BL1's data sections
77 * resident in secure RAM are not visible to BL2.
78 ******************************************************************************/
79void bl1_init_bl2_mem_layout(const meminfo_t *bl1_mem_layout,
80 meminfo_t *bl2_mem_layout)
81{
82 const size_t bl1_size = BL1_RAM_LIMIT - BL1_RAM_BASE;
83
84 assert(bl1_mem_layout != NULL);
85 assert(bl2_mem_layout != NULL);
86
87 /* Check that BL1's memory is lying outside of the free memory */
88 assert((BL1_RAM_LIMIT <= bl1_mem_layout->free_base) ||
89 (BL1_RAM_BASE >= bl1_mem_layout->free_base + bl1_mem_layout->free_size));
90
91 /* Remove BL1 RW data from the scope of memory visible to BL2 */
92 *bl2_mem_layout = *bl1_mem_layout;
93 reserve_mem(&bl2_mem_layout->total_base,
94 &bl2_mem_layout->total_size,
95 BL1_RAM_BASE,
96 bl1_size);
97
98 flush_dcache_range((unsigned long)bl2_mem_layout, sizeof(meminfo_t));
99}
100
101/*******************************************************************************
Achin Gupta4f6ad662013-10-25 09:08:21 +0100102 * Function to perform late architectural and platform specific initialization.
103 * It also locates and loads the BL2 raw binary image in the trusted DRAM. Only
104 * called by the primary cpu after a cold boot.
105 * TODO: Add support for alternative image load mechanism e.g using virtio/elf
106 * loader etc.
107 ******************************************************************************/
108void bl1_main(void)
109{
Dan Handley91b624e2014-07-29 17:14:00 +0100110 /* Announce our arrival */
111 NOTICE(FIRMWARE_WELCOME_STR);
112 NOTICE("BL1: %s\n", version_string);
113 NOTICE("BL1: %s\n", build_message);
114
115 INFO("BL1: RAM 0x%lx - 0x%lx\n", BL1_RAM_BASE, BL1_RAM_LIMIT);
116
James Morrissey40a6f642014-02-10 14:24:36 +0000117#if DEBUG
Vikram Kanigiri78a6e0c2014-03-11 17:41:00 +0000118 unsigned long sctlr_el3 = read_sctlr_el3();
James Morrissey40a6f642014-02-10 14:24:36 +0000119#endif
Vikram Kanigirida567432014-04-15 18:08:08 +0100120 image_info_t bl2_image_info = { {0} };
121 entry_point_info_t bl2_ep = { {0} };
Dan Handleye2712bc2014-04-10 15:37:22 +0100122 meminfo_t *bl1_tzram_layout;
123 meminfo_t *bl2_tzram_layout = 0x0;
Vikram Kanigirida567432014-04-15 18:08:08 +0100124 int err;
Achin Gupta4f6ad662013-10-25 09:08:21 +0100125
126 /*
127 * Ensure that MMU/Caches and coherency are turned on
128 */
129 assert(sctlr_el3 | SCTLR_M_BIT);
130 assert(sctlr_el3 | SCTLR_C_BIT);
131 assert(sctlr_el3 | SCTLR_I_BIT);
132
133 /* Perform remaining generic architectural setup from EL3 */
134 bl1_arch_setup();
135
136 /* Perform platform setup in BL1. */
137 bl1_platform_setup();
138
Vikram Kanigirida567432014-04-15 18:08:08 +0100139 SET_PARAM_HEAD(&bl2_image_info, PARAM_IMAGE_BINARY, VERSION_1, 0);
140 SET_PARAM_HEAD(&bl2_ep, PARAM_EP, VERSION_1, 0);
141
Sandrine Bailleux467d0572014-06-24 14:02:34 +0100142 /* Find out how much free trusted ram remains after BL1 load */
Sandrine Bailleuxee12f6f2013-11-28 14:55:58 +0000143 bl1_tzram_layout = bl1_plat_sec_mem_layout();
Sandrine Bailleux467d0572014-06-24 14:02:34 +0100144
Juan Castillod227d8b2015-01-07 13:49:59 +0000145#if TRUSTED_BOARD_BOOT
146 /* Initialize authentication module */
147 auth_init();
148
149 /*
150 * Load the BL2 certificate into the BL2 region. This region will be
151 * overwritten by the image, so the authentication module is responsible
152 * for storing the relevant data from the certificate (keys, hashes,
153 * etc.) so it can be used later.
154 */
155 err = load_image(bl1_tzram_layout,
156 BL2_CERT_NAME,
157 BL2_BASE,
158 &bl2_image_info,
159 NULL);
160 if (err) {
161 ERROR("Failed to load BL2 certificate.\n");
162 panic();
163 }
164
165 err = auth_verify_obj(AUTH_BL2_IMG_CERT, bl2_image_info.image_base,
166 bl2_image_info.image_size);
167 if (err) {
168 ERROR("Failed to validate BL2 certificate.\n");
169 panic();
170 }
171#endif /* TRUSTED_BOARD_BOOT */
172
Sandrine Bailleux467d0572014-06-24 14:02:34 +0100173 /* Load the BL2 image */
Vikram Kanigirida567432014-04-15 18:08:08 +0100174 err = load_image(bl1_tzram_layout,
Sandrine Bailleux467d0572014-06-24 14:02:34 +0100175 BL2_IMAGE_NAME,
176 BL2_BASE,
177 &bl2_image_info,
178 &bl2_ep);
Vikram Kanigirida567432014-04-15 18:08:08 +0100179 if (err) {
180 /*
181 * TODO: print failure to load BL2 but also add a tzwdog timer
182 * which will reset the system eventually.
183 */
Dan Handley91b624e2014-07-29 17:14:00 +0100184 ERROR("Failed to load BL2 firmware.\n");
Vikram Kanigirida567432014-04-15 18:08:08 +0100185 panic();
186 }
Juan Castillod227d8b2015-01-07 13:49:59 +0000187
188#if TRUSTED_BOARD_BOOT
189 err = auth_verify_obj(AUTH_BL2_IMG, bl2_image_info.image_base,
190 bl2_image_info.image_size);
191 if (err) {
192 ERROR("Failed to validate BL2 image.\n");
193 panic();
194 }
195
196 /* After working with data, invalidate the data cache */
197 inv_dcache_range(bl2_image_info.image_base,
198 (size_t)bl2_image_info.image_size);
199#endif /* TRUSTED_BOARD_BOOT */
200
Achin Gupta4f6ad662013-10-25 09:08:21 +0100201 /*
202 * Create a new layout of memory for BL2 as seen by BL1 i.e.
203 * tell it the amount of total and free memory available.
204 * This layout is created at the first free address visible
205 * to BL2. BL2 will read the memory layout before using its
206 * memory for other purposes.
207 */
Dan Handleye2712bc2014-04-10 15:37:22 +0100208 bl2_tzram_layout = (meminfo_t *) bl1_tzram_layout->free_base;
Sandrine Bailleux467d0572014-06-24 14:02:34 +0100209 bl1_init_bl2_mem_layout(bl1_tzram_layout, bl2_tzram_layout);
Achin Gupta4f6ad662013-10-25 09:08:21 +0100210
Vikram Kanigirida567432014-04-15 18:08:08 +0100211 bl1_plat_set_bl2_ep_info(&bl2_image_info, &bl2_ep);
212 bl2_ep.args.arg1 = (unsigned long)bl2_tzram_layout;
Dan Handley91b624e2014-07-29 17:14:00 +0100213 NOTICE("BL1: Booting BL2\n");
214 INFO("BL1: BL2 address = 0x%llx\n",
Vikram Kanigirida567432014-04-15 18:08:08 +0100215 (unsigned long long) bl2_ep.pc);
Dan Handley91b624e2014-07-29 17:14:00 +0100216 INFO("BL1: BL2 spsr = 0x%x\n", bl2_ep.spsr);
217 VERBOSE("BL1: BL2 memory layout address = 0x%llx\n",
218 (unsigned long long) bl2_tzram_layout);
219
Vikram Kanigirida567432014-04-15 18:08:08 +0100220 bl1_run_bl2(&bl2_ep);
Achin Gupta4f6ad662013-10-25 09:08:21 +0100221
Achin Gupta4f6ad662013-10-25 09:08:21 +0100222 return;
223}
224
225/*******************************************************************************
226 * Temporary function to print the fact that BL2 has done its job and BL31 is
227 * about to be loaded. This is needed as long as printfs cannot be used
228 ******************************************************************************/
Vikram Kanigirida567432014-04-15 18:08:08 +0100229void display_boot_progress(entry_point_info_t *bl31_ep_info)
Achin Gupta4f6ad662013-10-25 09:08:21 +0100230{
Dan Handley91b624e2014-07-29 17:14:00 +0100231 NOTICE("BL1: Booting BL3-1\n");
232 INFO("BL1: BL3-1 address = 0x%llx\n",
233 (unsigned long long)bl31_ep_info->pc);
234 INFO("BL1: BL3-1 spsr = 0x%llx\n",
235 (unsigned long long)bl31_ep_info->spsr);
236 INFO("BL1: BL3-1 params address = 0x%llx\n",
237 (unsigned long long)bl31_ep_info->args.arg0);
238 INFO("BL1: BL3-1 plat params address = 0x%llx\n",
239 (unsigned long long)bl31_ep_info->args.arg1);
Achin Gupta4f6ad662013-10-25 09:08:21 +0100240}