Gitiles
Code Review Sign In
git01.mediatek.com / filogic / atf / 86b38d44076b1627d39dc9ce037ba45917916da4 / . / docs / plat / intel-stratix10.rst
blob: 7f8d18e03b76e752c04e84045b5d0941d4efdc5e [file] [log] [blame]
Paul Beesleyf3653a62019-05-22 11:22:44 +0100[diff] [blame]1Intel Stratix 10 SoCFPGA
2========================
Tien Hock, Lohab34f742019-02-26 09:25:14 +0800[diff] [blame]3
4Stratix 10 SoCFPGA is a FPGA with integrated quad-core 64-bit Arm Cortex A53 processor.
5
6Upon boot, Boot ROM loads bl2 into OCRAM. Bl2 subsequently initializes
7the hardware, then loads bl31 and bl33 (UEFI) into DDR and boots to bl33.
8
9::
10
11 Boot ROM --> Trusted Firmware-A --> UEFI
12
13How to build
Paul Beesleyf3653a62019-05-22 11:22:44 +0100[diff] [blame]14------------
Tien Hock, Lohab34f742019-02-26 09:25:14 +0800[diff] [blame]15
16Code Locations
Paul Beesleyf3653a62019-05-22 11:22:44 +0100[diff] [blame]17~~~~~~~~~~~~~~
Tien Hock, Lohab34f742019-02-26 09:25:14 +0800[diff] [blame]18
19- Trusted Firmware-A:
20 `link <https://github.com/ARM-software/arm-trusted-firmware>`__
21
22- UEFI (to be updated with new upstreamed UEFI):
23 `link <https://github.com/altera-opensource/uefi-socfpga>`__
24
25Build Procedure
Paul Beesleyf3653a62019-05-22 11:22:44 +0100[diff] [blame]26~~~~~~~~~~~~~~~
Tien Hock, Lohab34f742019-02-26 09:25:14 +0800[diff] [blame]27
28- Fetch all the above 2 repositories into local host.
29 Make all the repositories in the same ${BUILD\_PATH}.
30
31- Prepare the AARCH64 toolchain.
32
33- Build UEFI using Stratix 10 platform as configuration
34 This will be updated to use an updated UEFI using the latest EDK2 source
35
36.. code:: bash
37
38 make CROSS_COMPILE=aarch64-linux-gnu- device=s10
39
40- Build atf providing the previously generated UEFI as the BL33 image
41
42.. code:: bash
43
Mark Dykesef3a4562020-01-08 20:37:18 +0000[diff] [blame]44 make CROSS_COMPILE=aarch64-linux-gnu- bl2 fip PLAT=stratix10
Tien Hock, Lohab34f742019-02-26 09:25:14 +0800[diff] [blame]45 BL33=PEI.ROM
46
47Install Procedure
Paul Beesleyf3653a62019-05-22 11:22:44 +0100[diff] [blame]48~~~~~~~~~~~~~~~~~
Tien Hock, Lohab34f742019-02-26 09:25:14 +0800[diff] [blame]49
50- dd fip.bin to a A2 partition on the MMC drive to be booted in Stratix 10
51 board.
52
53- Generate a SOF containing bl2
54
55.. code:: bash
Paul Beesleyf3653a62019-05-22 11:22:44 +0100[diff] [blame]56
Tien Hock, Lohab34f742019-02-26 09:25:14 +0800[diff] [blame]57 aarch64-linux-gnu-objcopy -I binary -O ihex --change-addresses 0xffe00000 bl2.bin bl2.hex
58 quartus_cpf --bootloader bl2.hex <quartus_generated_sof> <output_sof_with_bl2>
59
60- Configure SOF to board
61
62.. code:: bash
Paul Beesleyf3653a62019-05-22 11:22:44 +0100[diff] [blame]63
Tien Hock, Lohab34f742019-02-26 09:25:14 +0800[diff] [blame]64 nios2-configure-sof <output_sof_with_bl2>
65
66Boot trace
Paul Beesleyf3653a62019-05-22 11:22:44 +0100[diff] [blame]67----------
Tien Hock, Lohab34f742019-02-26 09:25:14 +0800[diff] [blame]68
69::
Paul Beesley743d0882019-09-25 12:58:36 +0000[diff] [blame]70
Tien Hock, Lohab34f742019-02-26 09:25:14 +0800[diff] [blame]71 INFO: DDR: DRAM calibration success.
72 INFO: ECC is disabled.
73 INFO: Init HPS NOC's DDR Scheduler.
74 NOTICE: BL2: v2.0(debug):v2.0-809-g7f8474a-dirty
75 NOTICE: BL2: Built : 17:38:19, Feb 18 2019
76 INFO: BL2: Doing platform setup
77 INFO: BL2: Loading image id 3
78 INFO: Loading image id=3 at address 0xffe1c000
79 INFO: Image id=3 loaded: 0xffe1c000 - 0xffe24034
80 INFO: BL2: Loading image id 5
81 INFO: Loading image id=5 at address 0x50000
82 INFO: Image id=5 loaded: 0x50000 - 0x550000
83 NOTICE: BL2: Booting BL31
84 INFO: Entry point address = 0xffe1c000
85 INFO: SPSR = 0x3cd
86 NOTICE: BL31: v2.0(debug):v2.0-810-g788c436-dirty
87 NOTICE: BL31: Built : 15:17:16, Feb 20 2019
88 INFO: ARM GICv2 driver initialized
89 INFO: BL31: Initializing runtime services
90 WARNING: BL31: cortex_a53: CPU workaround for 855873 was missing!
91 INFO: BL31: Preparing for EL3 exit to normal world
92 INFO: Entry point address = 0x50000
93 INFO: SPSR = 0x3c9
94 UEFI firmware (version 1.0 built at 11:26:18 on Nov 7 2018)