| Antonio Nino Diaz | fe75b05 | 2018-10-10 23:52:39 +0100 | [diff] [blame] | 1 | Trusted Firmware-A for Amlogic Meson S905 (GXBB) |
| 2 | ================================================ |
| 3 | |
| 4 | The Amlogic Meson S905 is a SoC with a quad core Arm Cortex-A53 running at |
| 5 | 1.5Ghz. It also contains a Cortex-M3 used as SCP. |
| 6 | |
| 7 | This port is a minimal implementation of BL31 capable of booting mainline U-Boot |
| 8 | and Linux: |
| 9 | |
| 10 | - SCPI support. |
| 11 | - Basic PSCI support (CPU_ON, CPU_OFF, SYSTEM_RESET, SYSTEM_OFF). Note that CPU0 |
| 12 | can't be turned off, so there is a workaround to hide this from the caller. |
| 13 | - GICv2 driver set up. |
| 14 | - Basic SIP services (read efuse data, enable/disable JTAG). |
| 15 | |
| 16 | In order to build it: |
| 17 | |
| 18 | :: |
| 19 | |
| 20 | CROSS_COMPILE=aarch64-linux-gnu- make DEBUG=1 PLAT=gxbb bl31 |
| 21 | |
| 22 | This port has been tested in a ODROID-C2. After building it, follow the |
| 23 | instructions in the `U-Boot repository`_, replacing the mentioned **bl31.bin** |
| 24 | by the one built from this port. |
| 25 | |
| Paul Beesley | 2437ddc | 2019-02-08 16:43:05 +0000 | [diff] [blame] | 26 | .. _U-Boot repository: https://github.com/u-boot/u-boot/blob/master/board/amlogic/odroid-c2/README.odroid-c2 |