Gitiles
Code Review Sign In
git01.mediatek.com / filogic / atf / 77922caa78276c64bcc75324bafa2db172f87898 / . / plat / xilinx / versal / include / plat_macros.S
blob: 38f47f669b73bd331e521720e416b059015d76ab [file] [log] [blame]
Siva Durga Prasad Paladugufe4af662018-09-25 18:44:58 +0530[diff] [blame]1/*
Michal Simek2a47faa2023-04-14 08:43:51 +0200[diff] [blame]2 * Copyright (c) 2018, Arm Limited and Contributors. All rights reserved.
Jay Buddhabhatti6a44ad02023-02-28 01:23:04 -0800[diff] [blame]3 * Copyright (c) 2022-2023, Advanced Micro Devices, Inc. All rights reserved.
Siva Durga Prasad Paladugufe4af662018-09-25 18:44:58 +0530[diff] [blame]4 *
5 * SPDX-License-Identifier: BSD-3-Clause
6 */
7
8#ifndef PLAT_MACROS_S
9#define PLAT_MACROS_S
10
Antonio Nino Diaze0f90632018-12-14 00:18:21 +0000[diff] [blame]11#include <drivers/arm/gic_common.h>
12#include <drivers/arm/gicv2.h>
13#include <drivers/arm/gicv3.h>
14
Siva Durga Prasad Paladugufe4af662018-09-25 18:44:58 +0530[diff] [blame]15#include "../include/platform_def.h"
Siva Durga Prasad Paladugufe4af662018-09-25 18:44:58 +0530[diff] [blame]16
17.section .rodata.gic_reg_name, "aS"
18/* Applicable only to GICv2 and GICv3 with SRE disabled (legacy mode) */
19gicc_regs:
20 .asciz "gicc_hppir", "gicc_ahppir", "gicc_ctlr", ""
21
22/* Applicable only to GICv3 with SRE enabled */
23icc_regs:
24 .asciz "icc_hppir0_el1", "icc_hppir1_el1", "icc_ctlr_el3", ""
25
26/* Registers common to both GICv2 and GICv3 */
27gicd_pend_reg:
28 .asciz "gicd_ispendr regs (Offsets 0x200 - 0x278)\n Offset:\t\t\tvalue\n"
29newline:
30 .asciz "\n"
31spacer:
32 .asciz ":\t\t0x"
33
34 /* ---------------------------------------------
35 * The below utility macro prints out relevant GIC
36 * registers whenever an unhandled exception is
37 * taken in BL31 on Versal platform.
38 * Expects: GICD base in x16, GICC base in x17
39 * Clobbers: x0 - x10, sp
40 * ---------------------------------------------
41 */
42 .macro versal_print_gic_regs
43 /* Check for GICv3 system register access */
44 mrs x7, id_aa64pfr0_el1
45 ubfx x7, x7, #ID_AA64PFR0_GIC_SHIFT, #ID_AA64PFR0_GIC_WIDTH
46 cmp x7, #1
47 b.ne print_gicv2
48
49 /* Check for SRE enable */
50 mrs x8, ICC_SRE_EL3
51 tst x8, #ICC_SRE_SRE_BIT
52 b.eq print_gicv2
53
54 /* Load the icc reg list to x6 */
55 adr x6, icc_regs
56 /* Load the icc regs to gp regs used by str_in_crash_buf_print */
57 mrs x8, ICC_HPPIR0_EL1
58 mrs x9, ICC_HPPIR1_EL1
59 mrs x10, ICC_CTLR_EL3
60 /* Store to the crash buf and print to console */
61 bl str_in_crash_buf_print
62 b print_gic_common
63
64print_gicv2:
65 /* Load the gicc reg list to x6 */
66 adr x6, gicc_regs
67 /* Load the gicc regs to gp regs used by str_in_crash_buf_print */
68 ldr w8, [x17, #GICC_HPPIR]
69 ldr w9, [x17, #GICC_AHPPIR]
70 ldr w10, [x17, #GICC_CTLR]
71 /* Store to the crash buf and print to console */
72 bl str_in_crash_buf_print
73
74print_gic_common:
75 /* Print the GICD_ISPENDR regs */
76 add x7, x16, #GICD_ISPENDR
77 adr x4, gicd_pend_reg
78 bl asm_print_str
79gicd_ispendr_loop:
80 sub x4, x7, x16
81 cmp x4, #0x280
82 b.eq exit_print_gic_regs
83 bl asm_print_hex
84
85 adr x4, spacer
86 bl asm_print_str
87
88 ldr x4, [x7], #8
89 bl asm_print_hex
90
91 adr x4, newline
92 bl asm_print_str
93 b gicd_ispendr_loop
94exit_print_gic_regs:
95 .endm
96
97 /* ---------------------------------------------
98 * The below required platform porting macro
99 * prints out relevant GIC and CCI registers
100 * whenever an unhandled exception is taken in
101 * BL31.
102 * Clobbers: x0 - x10, x16, x17, sp
103 * ---------------------------------------------
104 */
105 .macro plat_crash_print_regs
Jay Buddhabhatti6da87942023-10-05 05:21:50 -0700[diff] [blame]106 mov_imm x17, PLAT_ARM_GICD_BASE
107 mov_imm x16, PLAT_ARM_GICR_BASE
Siva Durga Prasad Paladugufe4af662018-09-25 18:44:58 +0530[diff] [blame]108 versal_print_gic_regs
109 .endm
110
111#endif /* PLAT_MACROS_S */