blob: e64947ddc76f5674044613077b1b5c336ad6cafb [file] [log] [blame]
Jorge Ramirez-Ortiz766263c2018-09-23 09:39:56 +02001/*
2 * Copyright (c) 2015-2017, Renesas Electronics Corporation. All rights reserved.
3 *
4 * SPDX-License-Identifier: BSD-3-Clause
5 */
6
7#include <debug.h>
8#include "emmc_config.h"
9#include "emmc_hal.h"
10#include "emmc_std.h"
11#include "emmc_registers.h"
12#include "emmc_def.h"
13
14static const uint32_t cmd_reg_hw[EMMC_CMD_MAX + 1] = {
15 0x00000000, /* CMD0 */
16 0x00000701, /* CMD1 */
17 0x00000002, /* CMD2 */
18 0x00000003, /* CMD3 */
19 0x00000004, /* CMD4 */
20 0x00000505, /* CMD5 */
21 0x00000406, /* CMD6 */
22 0x00000007, /* CMD7 */
23 0x00001C08, /* CMD8 */
24 0x00000009, /* CMD9 */
25 0x0000000A, /* CMD10 */
26 0x00000000, /* reserved */
27 0x0000000C, /* CMD12 */
28 0x0000000D, /* CMD13 */
29 0x00001C0E, /* CMD14 */
30 0x0000000F, /* CMD15 */
31 0x00000010, /* CMD16 */
32 0x00000011, /* CMD17 */
33 0x00007C12, /* CMD18 */
34 0x00000C13, /* CMD19 */
35 0x00000000,
36 0x00001C15, /* CMD21 */
37 0x00000000,
38 0x00000017, /* CMD23 */
39 0x00000018, /* CMD24 */
40 0x00006C19, /* CMD25 */
41 0x00000C1A, /* CMD26 */
42 0x0000001B, /* CMD27 */
43 0x0000001C, /* CMD28 */
44 0x0000001D, /* CMD29 */
45 0x0000001E, /* CMD30 */
46 0x00001C1F, /* CMD31 */
47 0x00000000,
48 0x00000000,
49 0x00000000,
50 0x00000423, /* CMD35 */
51 0x00000424, /* CMD36 */
52 0x00000000,
53 0x00000026, /* CMD38 */
54 0x00000427, /* CMD39 */
55 0x00000428, /* CMD40(send cmd) */
56 0x00000000,
57 0x0000002A, /* CMD42 */
58 0x00000000,
59 0x00000000,
60 0x00000000,
61 0x00000000,
62 0x00000000,
63 0x00000000,
64 0x00000C31,
65 0x00000000,
66 0x00000000,
67 0x00000000,
68 0x00007C35,
69 0x00006C36,
70 0x00000037, /* CMD55 */
71 0x00000038, /* CMD56(Read) */
72 0x00000000,
73 0x00000000,
74 0x00000000,
75 0x00000000
76};
77
78uint32_t emmc_bit_field(uint8_t *data, uint32_t top, uint32_t bottom)
79{
80 uint32_t value;
81
82 uint32_t index_top = (uint32_t) (15 - (top >> 3));
83 uint32_t index_bottom = (uint32_t) (15 - (bottom >> 3));
84
85 if (index_top == index_bottom) {
86 value = data[index_top];
87 } else if ((index_top + 1) == index_bottom) {
88 value =
89 (uint32_t) ((data[index_top] << 8) | data[index_bottom]);
90 } else if ((index_top + 2) == index_bottom) {
91 value =
92 (uint32_t) ((data[index_top] << 16) |
93 (data[index_top + 1] << 8) | data[index_top +
94 2]);
95 } else {
96 value =
97 (uint32_t) ((data[index_top] << 24) |
98 (data[index_top + 1] << 16) |
99 (data[index_top + 2] << 8) | data[index_top +
100 3]);
101 }
102
103 value = ((value >> (bottom & 0x07)) & ((1 << (top - bottom + 1)) - 1));
104
105 return value;
106}
107
108void emmc_write_error_info(uint16_t func_no, EMMC_ERROR_CODE error_code)
109{
110
111 mmc_drv_obj.error_info.num = func_no;
112 mmc_drv_obj.error_info.code = (uint16_t) error_code;
113
114 ERROR("BL2: emmc err:func_no=0x%x code=0x%x\n", func_no, error_code);
115}
116
117void emmc_write_error_info_func_no(uint16_t func_no)
118{
119
120 mmc_drv_obj.error_info.num = func_no;
121
122 ERROR("BL2: emmc err:func_no=0x%x\n", func_no);
123}
124
125void emmc_make_nontrans_cmd(HAL_MEMCARD_COMMAND cmd, uint32_t arg)
126{
127 /* command information */
128 mmc_drv_obj.cmd_info.cmd = cmd;
129 mmc_drv_obj.cmd_info.arg = arg;
130 mmc_drv_obj.cmd_info.dir = HAL_MEMCARD_READ;
131 mmc_drv_obj.cmd_info.hw =
132 cmd_reg_hw[cmd & HAL_MEMCARD_COMMAND_INDEX_MASK];
133
134 /* clear data transfer information */
135 mmc_drv_obj.trans_size = 0;
136 mmc_drv_obj.remain_size = 0;
137 mmc_drv_obj.buff_address_virtual = NULL;
138 mmc_drv_obj.buff_address_physical = NULL;
139
140 /* response information */
141 mmc_drv_obj.response_length = 6;
142
143 switch (mmc_drv_obj.cmd_info.cmd & HAL_MEMCARD_RESPONSE_TYPE_MASK) {
144 case HAL_MEMCARD_RESPONSE_NONE:
145 mmc_drv_obj.response = (uint32_t *) mmc_drv_obj.response_data;
146 mmc_drv_obj.response_length = 0;
147 break;
148 case HAL_MEMCARD_RESPONSE_R1:
149 mmc_drv_obj.response = &mmc_drv_obj.r1_card_status;
150 break;
151 case HAL_MEMCARD_RESPONSE_R1b:
152 mmc_drv_obj.cmd_info.hw |= BIT10; /* bit10 = R1 busy bit */
153 mmc_drv_obj.response = &mmc_drv_obj.r1_card_status;
154 break;
155 case HAL_MEMCARD_RESPONSE_R2:
156 mmc_drv_obj.response = (uint32_t *) mmc_drv_obj.response_data;
157 mmc_drv_obj.response_length = 17;
158 break;
159 case HAL_MEMCARD_RESPONSE_R3:
160 mmc_drv_obj.response = &mmc_drv_obj.r3_ocr;
161 break;
162 case HAL_MEMCARD_RESPONSE_R4:
163 mmc_drv_obj.response = &mmc_drv_obj.r4_resp;
164 break;
165 case HAL_MEMCARD_RESPONSE_R5:
166 mmc_drv_obj.response = &mmc_drv_obj.r5_resp;
167 break;
168 default:
169 mmc_drv_obj.response = (uint32_t *) mmc_drv_obj.response_data;
170 break;
171 }
172}
173
174void emmc_make_trans_cmd(HAL_MEMCARD_COMMAND cmd, uint32_t arg,
175 uint32_t *buff_address_virtual,
176 uint32_t len,
177 HAL_MEMCARD_OPERATION dir,
178 HAL_MEMCARD_DATA_TRANSFER_MODE transfer_mode)
179{
180 emmc_make_nontrans_cmd(cmd, arg); /* update common information */
181
182 /* for data transfer command */
183 mmc_drv_obj.cmd_info.dir = dir;
184 mmc_drv_obj.buff_address_virtual = buff_address_virtual;
185 mmc_drv_obj.buff_address_physical = buff_address_virtual;
186 mmc_drv_obj.trans_size = len;
187 mmc_drv_obj.remain_size = len;
188 mmc_drv_obj.transfer_mode = transfer_mode;
189}
190
191EMMC_ERROR_CODE emmc_send_idle_cmd(uint32_t arg)
192{
193 EMMC_ERROR_CODE result;
194 uint32_t freq;
195
196 /* initialize state */
197 mmc_drv_obj.mount = FALSE;
198 mmc_drv_obj.selected = FALSE;
199 mmc_drv_obj.during_transfer = FALSE;
200 mmc_drv_obj.during_cmd_processing = FALSE;
201 mmc_drv_obj.during_dma_transfer = FALSE;
202 mmc_drv_obj.dma_error_flag = FALSE;
203 mmc_drv_obj.force_terminate = FALSE;
204 mmc_drv_obj.state_machine_blocking = FALSE;
205
206 mmc_drv_obj.bus_width = HAL_MEMCARD_DATA_WIDTH_1_BIT;
207 mmc_drv_obj.max_freq = MMC_20MHZ; /* 20MHz */
208 mmc_drv_obj.current_state = EMMC_R1_STATE_IDLE;
209
210 /* CMD0 (MMC clock is current frequency. if Data transfer mode, 20MHz or higher.) */
211 emmc_make_nontrans_cmd(CMD0_GO_IDLE_STATE, arg); /* CMD0 */
212 result = emmc_exec_cmd(EMMC_R1_ERROR_MASK, mmc_drv_obj.response);
213 if (result != EMMC_SUCCESS) {
214 return result;
215 }
216
217 /* change MMC clock(400KHz) */
218 freq = MMC_400KHZ;
219 result = emmc_set_request_mmc_clock(&freq);
220 if (result != EMMC_SUCCESS) {
221 return result;
222 }
223
224 return EMMC_SUCCESS;
225}