| Haojian Zhuang | 602362d | 2017-06-01 12:15:14 +0800 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved. |
| 3 | * |
| 4 | * SPDX-License-Identifier: BSD-3-Clause |
| 5 | */ |
| Antonio Nino Diaz | 5eb8837 | 2018-11-08 10:20:19 +0000 | [diff] [blame] | 6 | #ifndef HI3660_H |
| 7 | #define HI3660_H |
| Haojian Zhuang | 602362d | 2017-06-01 12:15:14 +0800 | [diff] [blame] | 8 | |
| 9 | #include <hi3660_crg.h> |
| 10 | #include <hi3660_hkadc.h> |
| 11 | #include <hi3660_mem_map.h> |
| 12 | |
| 13 | #define ASP_CFG_REG_BASE 0xE804E000 |
| 14 | |
| 15 | #define ASP_CFG_MMBUF_CTRL_REG (ASP_CFG_REG_BASE + 0x148) |
| 16 | |
| 17 | #define LP_RAM_BASE 0xFFF50000 |
| 18 | |
| 19 | #define SCTRL_REG_BASE 0xFFF0A000 |
| 20 | |
| 21 | #define SCTRL_CONTROL_REG (SCTRL_REG_BASE + 0x000) |
| 22 | #define SCTRL_CONTROL_SYS_MODE(x) (((x) & 0xf) << 3) |
| 23 | #define SCTRL_CONTROL_SYS_MODE_NORMAL ((1 << 2) << 3) |
| 24 | #define SCTRL_CONTROL_SYS_MODE_SLOW ((1 << 1) << 3) |
| 25 | #define SCTRL_CONTROL_SYS_MODE_MASK (0xf << 3) |
| 26 | #define SCTRL_CONTROL_MODE_CTRL_NORMAL (1 << 2) |
| 27 | #define SCTRL_CONTROL_MODE_CTRL_SLOW (1 << 1) |
| 28 | #define SCTRL_CONTROL_MODE_CTRL_MASK 0x7 |
| 29 | |
| 30 | #define SCTRL_SCSYSSTAT_REG (SCTRL_REG_BASE + 0x004) |
| 31 | |
| 32 | #define SCTRL_DEEPSLEEPED_REG (SCTRL_REG_BASE + 0x008) |
| 33 | #define SCTRL_EFUSE_USB_MASK (1 << 30) |
| 34 | #define SCTRL_EFUSE_USB_PLL (1 << 30) |
| 35 | #define SCTRL_EFUSE_USB_ABB (0 << 30) |
| 36 | #define SCTRL_EFUSE_UFS_MASK (3 << 6) |
| 37 | #define SCTRL_EFUSE_UFS_PLL (1 << 6) |
| 38 | #define SCTRL_EFUSE_UFS_ABB (0 << 6) |
| 39 | |
| 40 | #define SCTRL_SCISOEN_REG (SCTRL_REG_BASE + 0x040) |
| 41 | #define SCTRL_SCISODIS_REG (SCTRL_REG_BASE + 0x044) |
| 42 | #define SCISO_MMBUFISO (1 << 3) |
| 43 | |
| 44 | #define SCTRL_SCPWREN_REG (SCTRL_REG_BASE + 0x060) |
| 45 | #define SCPWREN_MMBUFPWREN (1 << 3) |
| 46 | |
| 47 | #define SCTRL_PLL_CTRL0_REG (SCTRL_REG_BASE + 0x100) |
| 48 | #define SCTRL_PLL0_POSTDIV2(x) (((x) & 0x7) << 23) |
| 49 | #define SCTRL_PLL0_POSTDIV1(x) (((x) & 0x7) << 20) |
| 50 | #define SCTRL_PLL0_FBDIV(x) (((x) & 0xfff) << 8) |
| 51 | #define SCTRL_PLL0_REFDIV(x) (((x) & 0x3f) << 2) |
| 52 | #define SCTRL_PLL0_EN (1 << 0) |
| 53 | |
| 54 | #define SCTRL_PLL_CTRL1_REG (SCTRL_REG_BASE + 0x104) |
| 55 | #define SCTRL_PLL0_CLK_NO_GATE (1 << 26) |
| 56 | #define SCTRL_PLL0_CFG_VLD (1 << 25) |
| 57 | #define SCTRL_PLL0_FRACDIV(x) ((x) & 0xFFFFFF) |
| 58 | |
| 59 | #define SCTRL_PLL_STAT_REG (SCTRL_REG_BASE + 0x10C) |
| 60 | #define SCTRL_PLL0_STAT (1 << 0) |
| 61 | |
| 62 | #define SCTRL_SCPEREN0_REG (SCTRL_REG_BASE + 0x160) |
| 63 | #define SCTRL_SCPERDIS0_REG (SCTRL_REG_BASE + 0x164) |
| 64 | #define SCTRL_SCPERSTAT0_REG (SCTRL_REG_BASE + 0x168) |
| 65 | |
| 66 | #define SCTRL_SCPEREN1_REG (SCTRL_REG_BASE + 0x170) |
| 67 | #define SCTRL_SCPERDIS1_REG (SCTRL_REG_BASE + 0x174) |
| 68 | #define SCTRL_SCPEREN1_REG (SCTRL_REG_BASE + 0x170) |
| 69 | #define SCTRL_SCPERDIS1_REG (SCTRL_REG_BASE + 0x174) |
| 70 | #define SCPEREN1_WAIT_DDR_SELFREFRESH_DONE_BYPASS (1 << 31) |
| 71 | #define SCPEREN_GT_PCLK_MMBUFCFG (1 << 25) |
| 72 | #define SCPEREN_GT_PCLK_MMBUF (1 << 23) |
| 73 | #define SCPEREN_GT_ACLK_MMBUF (1 << 22) |
| 74 | #define SCPEREN_GT_CLK_NOC_AOBUS2MMBUF (1 << 6) |
| 75 | |
| 76 | #define SCTRL_SCPEREN2_REG (SCTRL_REG_BASE + 0x190) |
| 77 | #define SCTRL_SCPERDIS2_REG (SCTRL_REG_BASE + 0x194) |
| 78 | #define SCTRL_SCPERSTAT2_REG (SCTRL_REG_BASE + 0x198) |
| 79 | #define SCTRL_SCPERRSTEN0_REG (SCTRL_REG_BASE + 0x200) |
| 80 | #define SCTRL_SCPERRSTDIS0_REG (SCTRL_REG_BASE + 0x204) |
| 81 | #define SCTRL_SCPERRSTSTAT0_REG (SCTRL_REG_BASE + 0x208) |
| 82 | #define SCTRL_SCPERRSTEN1_REG (SCTRL_REG_BASE + 0x20C) |
| 83 | #define SCTRL_SCPERRSTDIS1_REG (SCTRL_REG_BASE + 0x210) |
| 84 | #define SCTRL_SCPERRSTSTAT1_REG (SCTRL_REG_BASE + 0x214) |
| 85 | #define IP_RST_MMBUFCFG (1 << 12) |
| 86 | #define IP_RST_MMBUF (1 << 11) |
| 87 | |
| 88 | #define SCTRL_SCPERRSTEN2_REG (SCTRL_REG_BASE + 0x218) |
| 89 | #define SCTRL_SCPERRSTDIS2_REG (SCTRL_REG_BASE + 0x21C) |
| 90 | #define SCTRL_SCPERRSTSTAT2_REG (SCTRL_REG_BASE + 0x220) |
| 91 | |
| 92 | #define SCTRL_SCCLKDIV2_REG (SCTRL_REG_BASE + 0x258) |
| 93 | #define SEL_CLK_MMBUF_MASK (0x3 << 8) |
| 94 | #define SEL_CLK_MMBUF_PLL0 (0x3 << 8) |
| 95 | #define SCCLKDIV2_GT_PCLK_MMBUF (1 << 7) |
| 96 | |
| 97 | #define SCTRL_SCCLKDIV4_REG (SCTRL_REG_BASE + 0x260) |
| 98 | #define GT_MMBUF_SYS (1 << 13) |
| 99 | #define GT_MMBUF_FLL (1 << 12) |
| 100 | #define GT_PLL_CLK_MMBUF (1 << 11) |
| 101 | |
| 102 | #define SCTRL_SCCLKDIV6_REG (SCTRL_REG_BASE + 0x268) |
| 103 | |
| 104 | #define SCTRL_SCPERCTRL7_REG (SCTRL_REG_BASE + 0x31C) |
| 105 | #define SCTRL_SCPERSTAT6_REG (SCTRL_REG_BASE + 0x378) |
| 106 | |
| 107 | #define SCTRL_SCINNERSTAT_REG (SCTRL_REG_BASE + 0x3A0) |
| 108 | #define EMMC_UFS_SEL (1 << 15) |
| 109 | |
| 110 | #define SCTRL_BAK_DATA0_REG (SCTRL_REG_BASE + 0x40C) |
| 111 | #define SCTRL_BAK_DATA4_REG (SCTRL_REG_BASE + 0x41C) |
| 112 | |
| 113 | #define SCTRL_LPMCU_CLKEN_REG (SCTRL_REG_BASE + 0x480) |
| 114 | #define SCTRL_LPMCU_CLKDIS_REG (SCTRL_REG_BASE + 0x484) |
| 115 | #define SCTRL_LPMCU_RSTEN_REG (SCTRL_REG_BASE + 0x500) |
| 116 | #define SCTRL_LPMCU_RSTDIS_REG (SCTRL_REG_BASE + 0x504) |
| 117 | #define DDRC_SOFT_BIT (1 << 6) |
| 118 | #define DDRC_CLK_BIT (1 << 5) |
| 119 | |
| 120 | #define SCTRL_SCPEREN0_SEC_REG (SCTRL_REG_BASE + 0x900) |
| 121 | #define SCTRL_SCPERDIS0_SEC_REG (SCTRL_REG_BASE + 0x904) |
| 122 | #define MMBUF_SEC_CTRL_MASK (0xfff << 20) |
| 123 | #define MMBUF_SEC_CTRL(x) (((x) & 0xfff) << 20) |
| 124 | |
| 125 | #define SCTRL_PERRSTEN1_SEC_REG (SCTRL_REG_BASE + 0xA50) |
| 126 | #define SCTRL_PERRSTDIS1_SEC_REG (SCTRL_REG_BASE + 0xA54) |
| 127 | #define SCTRL_PERRSTSTAT1_SEC_REG (SCTRL_REG_BASE + 0xA58) |
| 128 | #define RST_ASP_SUBSYS_BIT (1 << 0) |
| 129 | |
| 130 | #define SCTRL_PERRSTEN2_SEC_REG (SCTRL_REG_BASE + 0xB50) |
| 131 | #define SCTRL_PERRSTDIS2_SEC_REG (SCTRL_REG_BASE + 0xB54) |
| 132 | #define SCTRL_PERRSTSTAT2_SEC_REG (SCTRL_REG_BASE + 0xB58) |
| 133 | |
| 134 | #define SCTRL_HISEECLKDIV_REG (SCTRL_REG_BASE + 0xC28) |
| 135 | #define SC_SEL_HISEE_PLL_MASK (1 << 4) |
| 136 | #define SC_SEL_HISEE_PLL0 (1 << 4) |
| 137 | #define SC_SEL_HISEE_PLL2 (0 << 4) |
| 138 | #define SC_DIV_HISEE_PLL_MASK (7 << 16) |
| 139 | #define SC_DIV_HISEE_PLL(x) ((x) & 0x7) |
| 140 | |
| 141 | #define SCTRL_SCSOCID0_REG (SCTRL_REG_BASE + 0xE00) |
| 142 | |
| 143 | #define PMC_REG_BASE 0xFFF31000 |
| 144 | #define PMC_PPLL1_CTRL0_REG (PMC_REG_BASE + 0x038) |
| 145 | #define PMC_PPLL1_CTRL1_REG (PMC_REG_BASE + 0x03C) |
| 146 | #define PMC_PPLL2_CTRL0_REG (PMC_REG_BASE + 0x040) |
| 147 | #define PMC_PPLL2_CTRL1_REG (PMC_REG_BASE + 0x044) |
| 148 | #define PMC_PPLL3_CTRL0_REG (PMC_REG_BASE + 0x048) |
| 149 | #define PMC_PPLL3_CTRL1_REG (PMC_REG_BASE + 0x04C) |
| 150 | #define PPLLx_LOCK (1 << 26) |
| 151 | #define PPLLx_WITHOUT_CLK_GATE (1 << 26) |
| 152 | #define PPLLx_CFG_VLD (1 << 25) |
| 153 | #define PPLLx_INT_MOD (1 << 24) |
| 154 | #define PPLLx_POSTDIV2_MASK (0x7 << 23) |
| 155 | #define PPLLx_POSTDIV2(x) (((x) & 0x7) << 23) |
| 156 | #define PPLLx_POSTDIV1_MASK (0x7 << 20) |
| 157 | #define PPLLx_POSTDIV1(x) (((x) & 0x7) << 20) |
| 158 | #define PPLLx_FRACDIV_MASK (0x00FFFFFF) |
| 159 | #define PPLLx_FRACDIV(x) ((x) & 0x00FFFFFF) |
| 160 | #define PPLLx_FBDIV_MASK (0xfff << 8) |
| 161 | #define PPLLx_FBDIV(x) (((x) & 0xfff) << 8) |
| 162 | #define PPLLx_REFDIV_MASK (0x3f << 2) |
| 163 | #define PPLLx_REFDIV(x) (((x) & 0x3f) << 2) |
| 164 | #define PPLLx_BP (1 << 1) |
| 165 | #define PPLLx_EN (1 << 0) |
| 166 | |
| 167 | #define PMC_DDRLP_CTRL_REG (PMC_REG_BASE + 0x30C) |
| 168 | #define DDRC_CSYSREQ_CFG(x) ((x) & 0xF) |
| 169 | |
| 170 | #define PMC_NOC_POWER_IDLEREQ_REG (PMC_REG_BASE + 0x380) |
| 171 | #define PMC_NOC_POWER_IDLEREQ_IVP (1 << 14) |
| 172 | #define PMC_NOC_POWER_IDLEREQ_DSS (1 << 13) |
| 173 | #define PMC_NOC_POWER_IDLEREQ_VENC (1 << 11) |
| 174 | #define PMC_NOC_POWER_IDLEREQ_VDEC (1 << 10) |
| 175 | #define PMC_NOC_POWER_IDLEREQ_ISP (1 << 5) |
| 176 | #define PMC_NOC_POWER_IDLEREQ_VCODEC (1 << 4) |
| 177 | #define DDRPHY_BYPASS_MODE (1 << 0) |
| 178 | |
| 179 | #define PMC_NOC_POWER_IDLEACK_REG (PMC_REG_BASE + 0x384) |
| 180 | #define PMC_NOC_POWER_IDLE_REG (PMC_REG_BASE + 0x388) |
| 181 | |
| 182 | #define PMU_SSI0_REG_BASE 0xFFF34000 |
| 183 | |
| 184 | #define PMU_SSI0_LDO8_CTRL0_REG (PMU_SSI0_REG_BASE + (0x68 << 2)) |
| 185 | #define LDO8_CTRL0_EN_1_8V 0x02 |
| 186 | |
| 187 | #define PMU_SSI0_CLK_TOP_CTRL7_REG (PMU_SSI0_REG_BASE + (0x10C << 2)) |
| 188 | #define NP_XO_ABB_DIG (1 << 1) |
| 189 | |
| 190 | #define LP_CONFIG_REG_BASE 0xFFF3F000 |
| 191 | |
| 192 | #define DMAC_BASE 0xFDF30000 |
| 193 | |
| 194 | #define CCI400_REG_BASE 0xE8100000 |
| 195 | #define CCI400_SL_IFACE3_CLUSTER_IX 0 |
| 196 | #define CCI400_SL_IFACE4_CLUSTER_IX 1 |
| 197 | |
| 198 | #define GICD_REG_BASE 0xE82B1000 |
| 199 | #define GICC_REG_BASE 0xE82B2000 |
| 200 | /* |
| 201 | * GIC400 interrupt handling related constants |
| 202 | */ |
| 203 | #define IRQ_SEC_PHY_TIMER 29 |
| 204 | #define IRQ_SEC_SGI_0 8 |
| 205 | #define IRQ_SEC_SGI_1 9 |
| 206 | #define IRQ_SEC_SGI_2 10 |
| 207 | #define IRQ_SEC_SGI_3 11 |
| 208 | #define IRQ_SEC_SGI_4 12 |
| 209 | #define IRQ_SEC_SGI_5 13 |
| 210 | #define IRQ_SEC_SGI_6 14 |
| 211 | #define IRQ_SEC_SGI_7 15 |
| 212 | #define IRQ_SEC_SGI_8 16 |
| 213 | |
| 214 | #define IPC_REG_BASE 0xE896A000 |
| 215 | #define IPC_BASE (IPC_REG_BASE) |
| 216 | |
| 217 | #define IOMG_REG_BASE 0xE896C000 |
| 218 | |
| 219 | /* GPIO46: HUB 3.3V enable. active low */ |
| 220 | #define IOMG_044_REG (IOMG_REG_BASE + 0x0B0) |
| 221 | #define IOMG_UART5_RX_REG (IOMG_REG_BASE + 0x0BC) |
| 222 | #define IOMG_UART5_TX_REG (IOMG_REG_BASE + 0x0C0) |
| 223 | |
| 224 | #define IOCG_REG_BASE 0xE896C800 |
| 225 | |
| 226 | /* GPIO005: PMIC SSI. (2 << 4) */ |
| 227 | #define IOCG_006_REG (IOCG_REG_BASE + 0x018) |
| 228 | |
| 229 | #define TIMER9_REG_BASE 0xE8A00000 |
| 230 | |
| 231 | #define WDT0_REG_BASE 0xE8A06000 |
| 232 | #define WDT1_REG_BASE 0xE8A07000 |
| 233 | #define WDT_CONTROL_OFFSET 0x008 |
| 234 | #define WDT_LOCK_OFFSET 0xC00 |
| 235 | |
| 236 | #define WDT_UNLOCK 0x1ACCE551 |
| 237 | #define WDT_LOCKED 1 |
| 238 | |
| 239 | #define PCTRL_REG_BASE 0xE8A09000 |
| 240 | #define PCTRL_PERI_CTRL3_REG (PCTRL_REG_BASE + 0x010) |
| 241 | #define PCTRL_PERI_CTRL24_REG (PCTRL_REG_BASE + 0x064) |
| 242 | |
| Kaihua Zhong | 39ff2ee | 2018-07-16 17:33:48 +0800 | [diff] [blame] | 243 | #define GPIO0_BASE UL(0xE8A0B000) |
| 244 | #define GPIO1_BASE UL(0xE8A0C000) |
| 245 | #define GPIO2_BASE UL(0xE8A0D000) |
| 246 | #define GPIO3_BASE UL(0xE8A0E000) |
| 247 | #define GPIO4_BASE UL(0xE8A0F000) |
| 248 | #define GPIO5_BASE UL(0xE8A10000) |
| 249 | #define GPIO6_BASE UL(0xE8A11000) |
| 250 | #define GPIO7_BASE UL(0xE8A12000) |
| 251 | #define GPIO8_BASE UL(0xE8A13000) |
| 252 | #define GPIO9_BASE UL(0xE8A14000) |
| 253 | #define GPIO10_BASE UL(0xE8A15000) |
| 254 | #define GPIO11_BASE UL(0xE8A16000) |
| 255 | #define GPIO12_BASE UL(0xE8A17000) |
| 256 | #define GPIO13_BASE UL(0xE8A18000) |
| 257 | #define GPIO14_BASE UL(0xE8A19000) |
| 258 | #define GPIO15_BASE UL(0xE8A1A000) |
| 259 | #define GPIO16_BASE UL(0xE8A1B000) |
| 260 | #define GPIO17_BASE UL(0xE8A1C000) |
| 261 | #define GPIO20_BASE UL(0xE8A1F000) |
| 262 | #define GPIO21_BASE UL(0xE8A20000) |
| 263 | |
| Haojian Zhuang | 602362d | 2017-06-01 12:15:14 +0800 | [diff] [blame] | 264 | #define TZC_REG_BASE 0xE8A21000 |
| 265 | #define TZC_STAT0_REG (TZC_REG_BASE + 0x800) |
| 266 | #define TZC_EN0_REG (TZC_REG_BASE + 0x804) |
| 267 | #define TZC_DIS0_REG (TZC_REG_BASE + 0x808) |
| 268 | #define TZC_STAT1_REG (TZC_REG_BASE + 0x80C) |
| 269 | #define TZC_EN1_REG (TZC_REG_BASE + 0x810) |
| 270 | #define TZC_DIS1_REG (TZC_REG_BASE + 0x814) |
| 271 | #define TZC_STAT2_REG (TZC_REG_BASE + 0x818) |
| 272 | #define TZC_EN2_REG (TZC_REG_BASE + 0x81C) |
| 273 | #define TZC_DIS2_REG (TZC_REG_BASE + 0x820) |
| 274 | #define TZC_STAT3_REG (TZC_REG_BASE + 0x824) |
| 275 | #define TZC_EN3_REG (TZC_REG_BASE + 0x828) |
| 276 | #define TZC_DIS3_REG (TZC_REG_BASE + 0x82C) |
| 277 | #define TZC_STAT4_REG (TZC_REG_BASE + 0x830) |
| 278 | #define TZC_EN4_REG (TZC_REG_BASE + 0x834) |
| 279 | #define TZC_DIS4_REG (TZC_REG_BASE + 0x838) |
| 280 | #define TZC_STAT5_REG (TZC_REG_BASE + 0x83C) |
| 281 | #define TZC_EN5_REG (TZC_REG_BASE + 0x840) |
| 282 | #define TZC_DIS5_REG (TZC_REG_BASE + 0x844) |
| 283 | #define TZC_STAT6_REG (TZC_REG_BASE + 0x848) |
| 284 | #define TZC_EN6_REG (TZC_REG_BASE + 0x84C) |
| 285 | #define TZC_DIS6_REG (TZC_REG_BASE + 0x850) |
| 286 | #define TZC_STAT7_REG (TZC_REG_BASE + 0x854) |
| 287 | #define TZC_EN7_REG (TZC_REG_BASE + 0x858) |
| 288 | #define TZC_DIS7_REG (TZC_REG_BASE + 0x85C) |
| 289 | #define TZC_STAT8_REG (TZC_REG_BASE + 0x860) |
| 290 | #define TZC_EN8_REG (TZC_REG_BASE + 0x864) |
| 291 | #define TZC_DIS8_REG (TZC_REG_BASE + 0x868) |
| 292 | |
| 293 | #define MMBUF_BASE 0xEA800000 |
| 294 | |
| 295 | #define ACPU_DMCPACK0_BASE 0xEA900000 |
| 296 | |
| 297 | #define ACPU_DMCPACK1_BASE 0xEA920000 |
| 298 | |
| 299 | #define ACPU_DMCPACK2_BASE 0xEA940000 |
| 300 | |
| 301 | #define ACPU_DMCPACK3_BASE 0xEA960000 |
| 302 | |
| 303 | #define UART5_REG_BASE 0xFDF05000 |
| 304 | |
| 305 | #define USB3OTG_REG_BASE 0xFF100000 |
| 306 | |
| 307 | #define UFS_REG_BASE 0xFF3B0000 |
| 308 | |
| 309 | #define UFS_SYS_REG_BASE 0xFF3B1000 |
| 310 | |
| 311 | #define UFS_SYS_PSW_POWER_CTRL_REG (UFS_SYS_REG_BASE + 0x004) |
| 312 | #define UFS_SYS_PHY_ISO_EN_REG (UFS_SYS_REG_BASE + 0x008) |
| 313 | #define UFS_SYS_HC_LP_CTRL_REG (UFS_SYS_REG_BASE + 0x00C) |
| 314 | #define UFS_SYS_PHY_CLK_CTRL_REG (UFS_SYS_REG_BASE + 0x010) |
| 315 | #define UFS_SYS_PSW_CLK_CTRL_REG (UFS_SYS_REG_BASE + 0x014) |
| 316 | #define UFS_SYS_CLOCK_GATE_BYPASS_REG (UFS_SYS_REG_BASE + 0x018) |
| 317 | #define UFS_SYS_RESET_CTRL_EN_REG (UFS_SYS_REG_BASE + 0x01C) |
| 318 | #define UFS_SYS_MONITOR_HH_REG (UFS_SYS_REG_BASE + 0x03C) |
| 319 | #define UFS_SYS_UFS_SYSCTRL_REG (UFS_SYS_REG_BASE + 0x05C) |
| 320 | #define UFS_SYS_UFS_DEVICE_RESET_CTRL_REG (UFS_SYS_REG_BASE + 0x060) |
| 321 | #define UFS_SYS_UFS_APB_ADDR_MASK_REG (UFS_SYS_REG_BASE + 0x064) |
| 322 | |
| 323 | #define BIT_UFS_PSW_ISO_CTRL (1 << 16) |
| 324 | #define BIT_UFS_PSW_MTCMOS_EN (1 << 0) |
| 325 | #define BIT_UFS_REFCLK_ISO_EN (1 << 16) |
| 326 | #define BIT_UFS_PHY_ISO_CTRL (1 << 0) |
| 327 | #define BIT_SYSCTRL_LP_ISOL_EN (1 << 16) |
| 328 | #define BIT_SYSCTRL_PWR_READY (1 << 8) |
| 329 | #define BIT_SYSCTRL_REF_CLOCK_EN (1 << 24) |
| 330 | #define MASK_SYSCTRL_REF_CLOCK_SEL (3 << 8) |
| 331 | #define MASK_SYSCTRL_CFG_CLOCK_FREQ (0xFF) |
| 332 | #define BIT_SYSCTRL_PSW_CLK_EN (1 << 4) |
| 333 | #define MASK_UFS_CLK_GATE_BYPASS (0x3F) |
| 334 | #define BIT_SYSCTRL_LP_RESET_N (1 << 0) |
| 335 | #define BIT_UFS_REFCLK_SRC_SE1 (1 << 0) |
| 336 | #define MASK_UFS_SYSCTRL_BYPASS (0x3F << 16) |
| 337 | #define MASK_UFS_DEVICE_RESET (1 << 16) |
| 338 | #define BIT_UFS_DEVICE_RESET (1 << 0) |
| 339 | |
| Kaihua Zhong | 39ff2ee | 2018-07-16 17:33:48 +0800 | [diff] [blame] | 340 | #define GPIO18_BASE UL(0xFF3B4000) |
| 341 | #define GPIO19_BASE UL(0xFF3B5000) |
| 342 | |
| Haojian Zhuang | 602362d | 2017-06-01 12:15:14 +0800 | [diff] [blame] | 343 | #define IOMG_FIX_REG_BASE 0xFF3B6000 |
| 344 | |
| 345 | /* GPIO150: LED */ |
| 346 | #define IOMG_FIX_006_REG (IOMG_FIX_REG_BASE + 0x018) |
| 347 | /* GPIO151: LED */ |
| 348 | #define IOMG_FIX_007_REG (IOMG_FIX_REG_BASE + 0x01C) |
| 349 | |
| 350 | #define IOMG_AO_REG_BASE 0xFFF11000 |
| 351 | |
| 352 | /* GPIO189: LED */ |
| 353 | #define IOMG_AO_011_REG (IOMG_AO_REG_BASE + 0x02C) |
| 354 | /* GPIO190: LED */ |
| 355 | #define IOMG_AO_012_REG (IOMG_AO_REG_BASE + 0x030) |
| 356 | /* GPIO202: type C enable. active low */ |
| 357 | #define IOMG_AO_023_REG (IOMG_AO_REG_BASE + 0x05C) |
| 358 | /* GPIO206: USB switch. active low */ |
| 359 | #define IOMG_AO_026_REG (IOMG_AO_REG_BASE + 0x068) |
| 360 | /* GPIO219: PD interrupt. pull up */ |
| 361 | #define IOMG_AO_039_REG (IOMG_AO_REG_BASE + 0x09C) |
| Kaihua Zhong | b3f611a | 2018-01-09 16:51:38 +0800 | [diff] [blame] | 362 | /* GPIO213: PCIE_CLKREQ_N */ |
| 363 | #define IOMG_AO_033_REG (IOMG_AO_REG_BASE + 0x084) |
| Haojian Zhuang | 602362d | 2017-06-01 12:15:14 +0800 | [diff] [blame] | 364 | |
| 365 | #define IOCG_AO_REG_BASE 0xFFF1187C |
| 366 | /* GPIO219: PD interrupt. pull up */ |
| 367 | #define IOCG_AO_043_REG (IOCG_AO_REG_BASE + 0x030) |
| 368 | |
| Ryan Grachek | 44f8d65 | 2018-11-29 12:45:55 -0600 | [diff] [blame] | 369 | #define EDMAC_BASE 0xfdf30000 |
| 370 | #define EDMAC_SEC_CTRL (EDMAC_BASE + 0x694) |
| 371 | #define EDMAC_AXI_CONF(x) (EDMAC_BASE + 0x820 + (x << 6)) |
| 372 | #define EDMAC_SEC_CTRL_INTR_SEC (1 << 1) |
| 373 | #define EDMAC_SEC_CTRL_GLOBAL_SEC (1 << 0) |
| 374 | #define EDMAC_CHANNEL_NUMS 16 |
| 375 | |
| Ryan Grachek | 62a84ed | 2019-02-11 10:22:24 -0600 | [diff] [blame] | 376 | #define IOMCU_DMAC_BASE 0xffd77000 |
| 377 | #define IOMCU_DMAC_SEC_CTRL (IOMCU_DMAC_BASE + 0x694) |
| 378 | #define IOMCU_DMAC_AXI_CONF(x) (IOMCU_DMAC_BASE + 0x820 + ((x) << 6)) |
| 379 | #define IOMCU_DMAC_AXI_CONF_ARPROT_NS (1 << 6) |
| 380 | #define IOMCU_DMAC_AXI_CONF_AWPROT_NS (1 << 18) |
| 381 | #define IOMCU_DMAC_SEC_CTRL_INTR_SEC (1 << 1) |
| 382 | #define IOMCU_DMAC_SEC_CTRL_GLOBAL_SEC (1 << 0) |
| 383 | #define IOMCU_DMAC_CHANNEL_NUMS 8 |
| 384 | |
| Antonio Nino Diaz | 5eb8837 | 2018-11-08 10:20:19 +0000 | [diff] [blame] | 385 | #endif /* HI3660_H */ |