blob: 8e1c1cf99d56e5c8e99be60fc750c7aff0f2b8ee [file] [log] [blame]
Yann Gautier9d135e42018-07-16 19:36:06 +02001/*
Yann Gautier2bbf1712019-08-06 17:28:23 +02002 * Copyright (c) 2015-2023, ARM Limited and Contributors. All rights reserved.
Yann Gautier9d135e42018-07-16 19:36:06 +02003 *
4 * SPDX-License-Identifier: BSD-3-Clause
5 */
6
Yann Gautier9d135e42018-07-16 19:36:06 +02007#include <assert.h>
Yann Gautier9d135e42018-07-16 19:36:06 +02008#include <errno.h>
Antonio Nino Diaze0f90632018-12-14 00:18:21 +00009
Antonio Nino Diaze0f90632018-12-14 00:18:21 +000010#include <arch_helpers.h>
Etienne Carriere5a0f82f2020-06-08 20:25:08 +020011#include <bl32/sp_min/platform_sp_min.h>
Antonio Nino Diaze0f90632018-12-14 00:18:21 +000012#include <common/debug.h>
13#include <drivers/arm/gic_common.h>
14#include <drivers/arm/gicv2.h>
Yann Gautiera205a5c2021-08-30 15:06:54 +020015#include <drivers/clk.h>
Antonio Nino Diaze0f90632018-12-14 00:18:21 +000016#include <dt-bindings/clock/stm32mp1-clks.h>
17#include <lib/mmio.h>
18#include <lib/psci/psci.h>
19#include <plat/common/platform.h>
20
Nicolas Toromanoffbb82b1b2022-02-09 12:26:31 +010021#include <platform_def.h>
22
Yann Gautierf9d40d52019-01-17 14:41:46 +010023static uintptr_t stm32_sec_entrypoint;
Yann Gautier9d135e42018-07-16 19:36:06 +020024static uint32_t cntfrq_core0;
25
Yann Gautier9d135e42018-07-16 19:36:06 +020026/*******************************************************************************
27 * STM32MP1 handler called when a CPU is about to enter standby.
28 * call by core 1 to enter in wfi
29 ******************************************************************************/
30static void stm32_cpu_standby(plat_local_state_t cpu_state)
31{
32 uint32_t interrupt = GIC_SPURIOUS_INTERRUPT;
33
34 assert(cpu_state == ARM_LOCAL_STATE_RET);
35
36 /*
37 * Enter standby state
38 * dsb is good practice before using wfi to enter low power states
39 */
Yann Gautierf9d40d52019-01-17 14:41:46 +010040 isb();
Yann Gautier9d135e42018-07-16 19:36:06 +020041 dsb();
42 while (interrupt == GIC_SPURIOUS_INTERRUPT) {
43 wfi();
44
Elyes Haouas2be03c02023-02-13 09:14:48 +010045 /* Acknowledge IT */
Yann Gautier9d135e42018-07-16 19:36:06 +020046 interrupt = gicv2_acknowledge_interrupt();
47 /* If Interrupt == 1022 it will be acknowledged by non secure */
48 if ((interrupt != PENDING_G1_INTID) &&
49 (interrupt != GIC_SPURIOUS_INTERRUPT)) {
50 gicv2_end_of_interrupt(interrupt);
51 }
52 }
53}
54
55/*******************************************************************************
56 * STM32MP1 handler called when a power domain is about to be turned on. The
57 * mpidr determines the CPU to be turned on.
Yann Gautierf9d40d52019-01-17 14:41:46 +010058 * call by core 0 to activate core 1
Yann Gautier9d135e42018-07-16 19:36:06 +020059 ******************************************************************************/
60static int stm32_pwr_domain_on(u_register_t mpidr)
61{
62 unsigned long current_cpu_mpidr = read_mpidr_el1();
Nicolas Toromanoffbb82b1b2022-02-09 12:26:31 +010063 uintptr_t bkpr_core1_addr =
Yann Gautier9d135e42018-07-16 19:36:06 +020064 tamp_bkpr(BOOT_API_CORE1_BRANCH_ADDRESS_TAMP_BCK_REG_IDX);
Nicolas Toromanoffbb82b1b2022-02-09 12:26:31 +010065 uintptr_t bkpr_core1_magic =
Yann Gautier9d135e42018-07-16 19:36:06 +020066 tamp_bkpr(BOOT_API_CORE1_MAGIC_NUMBER_TAMP_BCK_REG_IDX);
67
68 if (mpidr == current_cpu_mpidr) {
69 return PSCI_E_INVALID_PARAMS;
70 }
71
Etienne Carriere5a0f82f2020-06-08 20:25:08 +020072 /* Only one valid entry point */
73 if (stm32_sec_entrypoint != (uintptr_t)&sp_min_warm_entrypoint) {
Yann Gautier9d135e42018-07-16 19:36:06 +020074 return PSCI_E_INVALID_ADDRESS;
75 }
76
Yann Gautiera205a5c2021-08-30 15:06:54 +020077 clk_enable(RTCAPB);
Yann Gautier9d135e42018-07-16 19:36:06 +020078
79 cntfrq_core0 = read_cntfrq_el0();
80
81 /* Write entrypoint in backup RAM register */
82 mmio_write_32(bkpr_core1_addr, stm32_sec_entrypoint);
83
84 /* Write magic number in backup register */
85 mmio_write_32(bkpr_core1_magic, BOOT_API_A7_CORE1_MAGIC_NUMBER);
86
Yann Gautiera205a5c2021-08-30 15:06:54 +020087 clk_disable(RTCAPB);
Yann Gautier9d135e42018-07-16 19:36:06 +020088
89 /* Generate an IT to core 1 */
Florian Lugoud4e25032021-09-08 12:40:24 +020090 gicv2_raise_sgi(ARM_IRQ_SEC_SGI_0, false, STM32MP_SECONDARY_CPU);
Yann Gautier9d135e42018-07-16 19:36:06 +020091
92 return PSCI_E_SUCCESS;
93}
94
95/*******************************************************************************
96 * STM32MP1 handler called when a power domain is about to be turned off. The
97 * target_state encodes the power state that each level should transition to.
98 ******************************************************************************/
99static void stm32_pwr_domain_off(const psci_power_state_t *target_state)
100{
101 /* Nothing to do */
102}
103
104/*******************************************************************************
105 * STM32MP1 handler called when a power domain is about to be suspended. The
106 * target_state encodes the power state that each level should transition to.
107 ******************************************************************************/
108static void stm32_pwr_domain_suspend(const psci_power_state_t *target_state)
109{
110 /* Nothing to do, power domain is not disabled */
111}
112
113/*******************************************************************************
114 * STM32MP1 handler called when a power domain has just been powered on after
115 * being turned off earlier. The target_state encodes the low power state that
116 * each level has woken up from.
117 * call by core 1 just after wake up
118 ******************************************************************************/
119static void stm32_pwr_domain_on_finish(const psci_power_state_t *target_state)
120{
Yann Gautier2bbf1712019-08-06 17:28:23 +0200121 stm32mp_gic_pcpu_init();
Yann Gautier9d135e42018-07-16 19:36:06 +0200122
123 write_cntfrq_el0(cntfrq_core0);
124}
125
126/*******************************************************************************
127 * STM32MP1 handler called when a power domain has just been powered on after
128 * having been suspended earlier. The target_state encodes the low power state
129 * that each level has woken up from.
130 ******************************************************************************/
131static void stm32_pwr_domain_suspend_finish(const psci_power_state_t
132 *target_state)
133{
134 /* Nothing to do, power domain is not disabled */
135}
136
137static void __dead2 stm32_pwr_domain_pwr_down_wfi(const psci_power_state_t
138 *target_state)
139{
140 ERROR("stm32mpu1 Power Down WFI: operation not handled.\n");
141 panic();
142}
143
144static void __dead2 stm32_system_off(void)
145{
146 ERROR("stm32mpu1 System Off: operation not handled.\n");
147 panic();
148}
149
150static void __dead2 stm32_system_reset(void)
151{
Yann Gautier3d78a2e2019-02-14 11:01:20 +0100152 mmio_setbits_32(stm32mp_rcc_base() + RCC_MP_GRSTCSETR,
153 RCC_MP_GRSTCSETR_MPSYSRST);
Yann Gautier9d135e42018-07-16 19:36:06 +0200154
155 /* Loop in case system reset is not immediately caught */
156 for ( ; ; ) {
157 ;
158 }
159}
160
161static int stm32_validate_power_state(unsigned int power_state,
162 psci_power_state_t *req_state)
163{
164 int pstate = psci_get_pstate_type(power_state);
165
166 if (pstate != 0) {
167 return PSCI_E_INVALID_PARAMS;
168 }
169
170 if (psci_get_pstate_pwrlvl(power_state)) {
171 return PSCI_E_INVALID_PARAMS;
172 }
173
174 if (psci_get_pstate_id(power_state)) {
175 return PSCI_E_INVALID_PARAMS;
176 }
177
178 req_state->pwr_domain_state[0] = ARM_LOCAL_STATE_RET;
179 req_state->pwr_domain_state[1] = ARM_LOCAL_STATE_RUN;
180
181 return PSCI_E_SUCCESS;
182}
183
184static int stm32_validate_ns_entrypoint(uintptr_t entrypoint)
185{
186 /* The non-secure entry point must be in DDR */
Yann Gautiera2e2a302019-02-14 11:13:39 +0100187 if (entrypoint < STM32MP_DDR_BASE) {
Yann Gautier9d135e42018-07-16 19:36:06 +0200188 return PSCI_E_INVALID_ADDRESS;
189 }
190
191 return PSCI_E_SUCCESS;
192}
193
194static int stm32_node_hw_state(u_register_t target_cpu,
195 unsigned int power_level)
196{
197 /*
198 * The format of 'power_level' is implementation-defined, but 0 must
199 * mean a CPU. Only allow level 0.
200 */
201 if (power_level != MPIDR_AFFLVL0) {
202 return PSCI_E_INVALID_PARAMS;
203 }
204
205 /*
206 * From psci view the CPU 0 is always ON,
207 * CPU 1 can be SUSPEND or RUNNING.
208 * Therefore do not manage POWER OFF state and always return HW_ON.
209 */
210
211 return (int)HW_ON;
212}
213
214/*******************************************************************************
215 * Export the platform handlers. The ARM Standard platform layer will take care
216 * of registering the handlers with PSCI.
217 ******************************************************************************/
218static const plat_psci_ops_t stm32_psci_ops = {
219 .cpu_standby = stm32_cpu_standby,
220 .pwr_domain_on = stm32_pwr_domain_on,
221 .pwr_domain_off = stm32_pwr_domain_off,
222 .pwr_domain_suspend = stm32_pwr_domain_suspend,
223 .pwr_domain_on_finish = stm32_pwr_domain_on_finish,
224 .pwr_domain_suspend_finish = stm32_pwr_domain_suspend_finish,
225 .pwr_domain_pwr_down_wfi = stm32_pwr_domain_pwr_down_wfi,
226 .system_off = stm32_system_off,
227 .system_reset = stm32_system_reset,
228 .validate_power_state = stm32_validate_power_state,
229 .validate_ns_entrypoint = stm32_validate_ns_entrypoint,
230 .get_node_hw_state = stm32_node_hw_state
231};
232
233/*******************************************************************************
234 * Export the platform specific power ops.
235 ******************************************************************************/
236int plat_setup_psci_ops(uintptr_t sec_entrypoint,
237 const plat_psci_ops_t **psci_ops)
238{
239 stm32_sec_entrypoint = sec_entrypoint;
240 *psci_ops = &stm32_psci_ops;
241
242 return 0;
243}