| sah01 | 6ec01e8 | 2021-06-06 14:38:01 +0530 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (c) 2022, Arm Limited. All rights reserved. |
| 3 | * |
| 4 | * SPDX-License-Identifier: BSD-3-Clause |
| 5 | */ |
| 6 | |
| 7 | #include <common/debug.h> |
| 8 | #include <drivers/arm/css/sds.h> |
| 9 | #include <lib/mmio.h> |
| 10 | #include <lib/utils.h> |
| 11 | |
| 12 | #include "n1sdp_def.h" |
| 13 | #include <plat/arm/common/plat_arm.h> |
| 14 | |
| 15 | struct n1sdp_plat_info { |
| 16 | bool multichip_mode; |
| 17 | uint8_t secondary_count; |
| 18 | uint8_t local_ddr_size; |
| 19 | uint8_t remote_ddr_size; |
| 20 | } __packed; |
| 21 | |
| 22 | /* |
| 23 | * N1SDP platform supports RDIMMs with ECC capability. To use the ECC |
| 24 | * capability, the entire DDR memory space has to be zeroed out before |
| 25 | * enabling the ECC bits in DMC620. Zeroing out several gigabytes of |
| 26 | * memory from SCP is quite time consuming so the following function |
| 27 | * is added to zero out the DDR memory from application processor which is |
| 28 | * much faster compared to SCP. |
| 29 | */ |
| 30 | |
| 31 | void dmc_ecc_setup(uint8_t ddr_size_gb) |
| 32 | { |
| 33 | uint64_t dram2_size; |
| 34 | |
| 35 | dram2_size = (ddr_size_gb * 1024UL * 1024UL * 1024UL) - |
| 36 | ARM_DRAM1_SIZE; |
| 37 | |
| 38 | INFO("Zeroing DDR memories\n"); |
| 39 | zero_normalmem((void *)ARM_DRAM1_BASE, ARM_DRAM1_SIZE); |
| 40 | flush_dcache_range(ARM_DRAM1_BASE, ARM_DRAM1_SIZE); |
| 41 | zero_normalmem((void *)ARM_DRAM2_BASE, dram2_size); |
| 42 | flush_dcache_range(ARM_DRAM2_BASE, dram2_size); |
| 43 | |
| 44 | INFO("Enabling ECC on DMCs\n"); |
| 45 | /* Set DMCs to CONFIG state before writing ERR0CTLR0 register */ |
| 46 | mmio_write_32(N1SDP_DMC0_MEMC_CMD_REG, N1SDP_DMC_MEMC_CMD_CONFIG); |
| 47 | mmio_write_32(N1SDP_DMC1_MEMC_CMD_REG, N1SDP_DMC_MEMC_CMD_CONFIG); |
| 48 | |
| 49 | /* Enable ECC in DMCs */ |
| 50 | mmio_setbits_32(N1SDP_DMC0_ERR0CTLR0_REG, N1SDP_DMC_ERR0CTLR0_ECC_EN); |
| 51 | mmio_setbits_32(N1SDP_DMC1_ERR0CTLR0_REG, N1SDP_DMC_ERR0CTLR0_ECC_EN); |
| 52 | |
| 53 | /* Set DMCs to READY state */ |
| 54 | mmio_write_32(N1SDP_DMC0_MEMC_CMD_REG, N1SDP_DMC_MEMC_CMD_READY); |
| 55 | mmio_write_32(N1SDP_DMC1_MEMC_CMD_REG, N1SDP_DMC_MEMC_CMD_READY); |
| 56 | } |
| 57 | |
| 58 | void bl2_platform_setup(void) |
| 59 | { |
| 60 | int ret; |
| 61 | struct n1sdp_plat_info plat_info; |
| 62 | |
| 63 | ret = sds_init(); |
| 64 | if (ret != SDS_OK) { |
| 65 | ERROR("SDS initialization failed\n"); |
| 66 | panic(); |
| 67 | } |
| 68 | |
| 69 | ret = sds_struct_read(N1SDP_SDS_PLATFORM_INFO_STRUCT_ID, |
| 70 | N1SDP_SDS_PLATFORM_INFO_OFFSET, |
| 71 | &plat_info, |
| 72 | N1SDP_SDS_PLATFORM_INFO_SIZE, |
| 73 | SDS_ACCESS_MODE_NON_CACHED); |
| 74 | if (ret != SDS_OK) { |
| 75 | ERROR("Error getting platform info from SDS\n"); |
| 76 | panic(); |
| 77 | } |
| 78 | /* Validate plat_info SDS */ |
| 79 | if ((plat_info.local_ddr_size == 0) |
| 80 | || (plat_info.local_ddr_size > N1SDP_MAX_DDR_CAPACITY_GB) |
| 81 | || (plat_info.remote_ddr_size > N1SDP_MAX_DDR_CAPACITY_GB) |
| 82 | || (plat_info.secondary_count > N1SDP_MAX_SECONDARY_COUNT)) { |
| 83 | ERROR("platform info SDS is corrupted\n"); |
| 84 | panic(); |
| 85 | } |
| 86 | |
| 87 | dmc_ecc_setup(plat_info.local_ddr_size); |
| 88 | arm_bl2_platform_setup(); |
| 89 | } |