blob: 6866bd65aa13efea2ffae97548409ae837cbcc6f [file] [log] [blame]
Andre Przywara452b2b62018-09-28 00:37:19 +01001#
2# Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved.
3#
4# SPDX-License-Identifier: BSD-3-Clause
5#
6
7include lib/xlat_tables_v2/xlat_tables.mk
8
9AW_PLAT := plat/allwinner
10
11PLAT_INCLUDES := -Iinclude/plat/arm/common \
12 -Iinclude/plat/arm/common/aarch64 \
13 -I${AW_PLAT}/common/include \
14 -I${AW_PLAT}/${PLAT}/include
15
Andre Przywaraea5fa472018-09-16 02:08:06 +010016include lib/libfdt/libfdt.mk
17
Julius Werner6b88b652018-11-27 17:50:28 -080018PLAT_BL_COMMON_SOURCES := drivers/ti/uart/${ARCH}/16550_console.S \
Andre Przywara452b2b62018-09-28 00:37:19 +010019 ${XLAT_TABLES_LIB_SRCS} \
20 ${AW_PLAT}/common/plat_helpers.S \
21 ${AW_PLAT}/common/sunxi_common.c
22
23BL31_SOURCES += drivers/arm/gic/common/gic_common.c \
24 drivers/arm/gic/v2/gicv2_helpers.c \
25 drivers/arm/gic/v2/gicv2_main.c \
26 drivers/delay_timer/delay_timer.c \
27 drivers/delay_timer/generic_delay_timer.c \
28 lib/cpus/${ARCH}/cortex_a53.S \
29 plat/common/plat_gicv2.c \
30 plat/common/plat_psci_common.c \
31 ${AW_PLAT}/common/sunxi_bl31_setup.c \
32 ${AW_PLAT}/common/sunxi_cpu_ops.c \
33 ${AW_PLAT}/common/sunxi_pm.c \
34 ${AW_PLAT}/${PLAT}/sunxi_power.c \
35 ${AW_PLAT}/common/sunxi_security.c \
36 ${AW_PLAT}/common/sunxi_topology.c
37
38# The bootloader is guaranteed to only run on CPU 0 by the boot ROM.
39COLD_BOOT_SINGLE_CPU := 1
40
Samuel Hollandc47f00e2019-06-08 16:03:32 -050041# Do not enable SPE (not supported on ARM v8.0).
42ENABLE_SPE_FOR_LOWER_ELS := 0
43
44# Do not enable SVE (not supported on ARM v8.0).
45ENABLE_SVE_FOR_NS := 0
46
Andre Przywara452b2b62018-09-28 00:37:19 +010047# Enable workarounds for Cortex-A53 errata. Allwinner uses at least r0p4.
48ERRATA_A53_835769 := 1
49ERRATA_A53_843419 := 1
50ERRATA_A53_855873 := 1
51
Andre Przywara452b2b62018-09-28 00:37:19 +010052# The reset vector can be changed for each CPU.
53PROGRAMMABLE_RESET_ADDRESS := 1
54
55# Allow mapping read-only data as execute-never.
56SEPARATE_CODE_AND_RODATA := 1
57
58# BL31 gets loaded alongside BL33 (U-Boot) by U-Boot's SPL
59RESET_TO_BL31 := 1
Andre Przywara647a2e12018-10-11 22:14:30 +010060
61# We are short on memory, so save 3.5KB by not having an extra coherent page.
62USE_COHERENT_MEM := 0
Samuel Hollandc47f00e2019-06-08 16:03:32 -050063
64# This platform is single-cluster and does not require coherency setup.
65WARMBOOT_ENABLE_DCACHE_EARLY := 1