Jorge Ramirez-Ortiz | 6919d70 | 2018-09-23 09:39:48 +0200 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (c) 2015-2018, Renesas Electronics Corporation. All rights reserved. |
| 3 | * |
| 4 | * SPDX-License-Identifier: BSD-3-Clause |
| 5 | */ |
| 6 | |
| 7 | #include <stdint.h> |
Jorge Ramirez-Ortiz | 6919d70 | 2018-09-23 09:39:48 +0200 | [diff] [blame] | 8 | #include <string.h> |
Antonio Nino Diaz | e0f9063 | 2018-12-14 00:18:21 +0000 | [diff] [blame] | 9 | |
| 10 | #include <arch_helpers.h> |
| 11 | #include <common/debug.h> |
| 12 | #include <lib/mmio.h> |
| 13 | |
Jorge Ramirez-Ortiz | 6919d70 | 2018-09-23 09:39:48 +0200 | [diff] [blame] | 14 | #include "rcar_def.h" |
| 15 | #include "cpg_registers.h" |
Jorge Ramirez-Ortiz | 6919d70 | 2018-09-23 09:39:48 +0200 | [diff] [blame] | 16 | #include "rcar_private.h" |
| 17 | |
| 18 | /* DMA CHANNEL setting (0/16/32) */ |
| 19 | #define DMA_CH 0 |
| 20 | |
| 21 | #if (DMA_CH == 0) |
| 22 | #define SYS_DMAC_BIT ((uint32_t)1U << 19U) |
| 23 | #define DMA_BASE (0xE6700000U) |
| 24 | #elif (DMA_CH == 16) |
| 25 | #define SYS_DMAC_BIT ((uint32_t)1U << 18U) |
| 26 | #define DMA_BASE (0xE7300000U) |
| 27 | #elif (DMA_CH == 32) |
| 28 | #define SYS_DMAC_BIT ((uint32_t)1U << 17U) |
| 29 | #define DMA_BASE (0xE7320000U) |
| 30 | #else |
| 31 | #define SYS_DMAC_BIT ((uint32_t)1U << 19U) |
| 32 | #define DMA_BASE (0xE6700000U) |
| 33 | #endif |
| 34 | |
| 35 | /* DMA operation */ |
| 36 | #define DMA_DMAOR (DMA_BASE + 0x0060U) |
| 37 | /* DMA secure control */ |
| 38 | #define DMA_DMASEC (DMA_BASE + 0x0030U) |
| 39 | /* DMA channel clear */ |
| 40 | #define DMA_DMACHCLR (DMA_BASE + 0x0080U) |
| 41 | /* DMA source address */ |
| 42 | #define DMA_DMASAR (DMA_BASE + 0x8000U) |
| 43 | /* DMA destination address */ |
| 44 | #define DMA_DMADAR (DMA_BASE + 0x8004U) |
| 45 | /* DMA transfer count */ |
| 46 | #define DMA_DMATCR (DMA_BASE + 0x8008U) |
| 47 | /* DMA channel control */ |
| 48 | #define DMA_DMACHCR (DMA_BASE + 0x800CU) |
| 49 | /* DMA fixed destination address */ |
| 50 | #define DMA_DMAFIXDAR (DMA_BASE + 0x8014U) |
| 51 | |
| 52 | #define DMA_USE_CHANNEL (0x00000001U) |
| 53 | #define DMAOR_INITIAL (0x0301U) |
| 54 | #define DMACHCLR_CH_ALL (0x0000FFFFU) |
| 55 | #define DMAFIXDAR_32BIT_SHIFT (32U) |
| 56 | #define DMAFIXDAR_DAR_MASK (0x000000FFU) |
| 57 | #define DMADAR_BOUNDARY_ADDR (0x100000000ULL) |
| 58 | #define DMATCR_CNT_SHIFT (6U) |
| 59 | #define DMATCR_MAX (0x00FFFFFFU) |
| 60 | #define DMACHCR_TRN_MODE (0x00105409U) |
| 61 | #define DMACHCR_DE_BIT (0x00000001U) |
| 62 | #define DMACHCR_TE_BIT (0x00000002U) |
| 63 | #define DMACHCR_CHE_BIT (0x80000000U) |
| 64 | |
| 65 | #define DMA_SIZE_UNIT FLASH_TRANS_SIZE_UNIT |
| 66 | #define DMA_FRACTION_MASK (0xFFU) |
| 67 | #define DMA_DST_LIMIT (0x10000000000ULL) |
| 68 | |
| 69 | /* transfer length limit */ |
| 70 | #define DMA_LENGTH_LIMIT ((DMATCR_MAX * (1U << DMATCR_CNT_SHIFT)) \ |
| 71 | & ~DMA_FRACTION_MASK) |
| 72 | |
| 73 | static void dma_enable(void) |
| 74 | { |
| 75 | mstpcr_write(CPG_SMSTPCR2, CPG_MSTPSR2, SYS_DMAC_BIT); |
| 76 | } |
| 77 | |
| 78 | static void dma_setup(void) |
| 79 | { |
| 80 | mmio_write_16(DMA_DMAOR, 0); |
| 81 | mmio_write_32(DMA_DMACHCLR, DMACHCLR_CH_ALL); |
| 82 | } |
| 83 | |
| 84 | static void dma_start(uintptr_t dst, uint32_t src, uint32_t len) |
| 85 | { |
| 86 | mmio_write_16(DMA_DMAOR, DMAOR_INITIAL); |
| 87 | mmio_write_32(DMA_DMAFIXDAR, (dst >> DMAFIXDAR_32BIT_SHIFT) & |
| 88 | DMAFIXDAR_DAR_MASK); |
| 89 | mmio_write_32(DMA_DMADAR, dst & UINT32_MAX); |
| 90 | mmio_write_32(DMA_DMASAR, src); |
| 91 | mmio_write_32(DMA_DMATCR, len >> DMATCR_CNT_SHIFT); |
| 92 | mmio_write_32(DMA_DMASEC, DMA_USE_CHANNEL); |
| 93 | mmio_write_32(DMA_DMACHCR, DMACHCR_TRN_MODE); |
| 94 | } |
| 95 | |
| 96 | static void dma_end(void) |
| 97 | { |
| 98 | while ((mmio_read_32(DMA_DMACHCR) & DMACHCR_TE_BIT) == 0) { |
| 99 | if ((mmio_read_32(DMA_DMACHCR) & DMACHCR_CHE_BIT) != 0U) { |
| 100 | ERROR("BL2: DMA - Channel Address Error\n"); |
| 101 | panic(); |
| 102 | break; |
| 103 | } |
| 104 | } |
| 105 | /* DMA transfer Disable */ |
| 106 | mmio_clrbits_32(DMA_DMACHCR, DMACHCR_DE_BIT); |
| 107 | while ((mmio_read_32(DMA_DMACHCR) & DMACHCR_DE_BIT) != 0) |
| 108 | ; |
| 109 | |
| 110 | mmio_write_32(DMA_DMASEC, 0); |
| 111 | mmio_write_16(DMA_DMAOR, 0); |
| 112 | mmio_write_32(DMA_DMACHCLR, DMA_USE_CHANNEL); |
| 113 | } |
| 114 | |
| 115 | void rcar_dma_exec(uintptr_t dst, uint32_t src, uint32_t len) |
| 116 | { |
| 117 | uint32_t dma_len = len; |
| 118 | |
| 119 | if (len & DMA_FRACTION_MASK) |
| 120 | dma_len = (len + DMA_SIZE_UNIT) & ~DMA_FRACTION_MASK; |
| 121 | |
| 122 | if (!dma_len || dma_len > DMA_LENGTH_LIMIT) { |
| 123 | ERROR("BL2: DMA - size invalid, length (0x%x)\n", dma_len); |
| 124 | panic(); |
| 125 | } |
| 126 | |
| 127 | if (src & DMA_FRACTION_MASK) { |
| 128 | ERROR("BL2: DMA - source address invalid (0x%x), " |
| 129 | "length (0x%x)\n", src, dma_len); |
| 130 | panic(); |
| 131 | } |
| 132 | |
| 133 | if ((dst & UINT32_MAX) + dma_len > DMADAR_BOUNDARY_ADDR || |
| 134 | (dst + dma_len > DMA_DST_LIMIT) || |
| 135 | (dst & DMA_FRACTION_MASK)) { |
| 136 | ERROR("BL2: DMA - destination address invalid (0x%lx), " |
| 137 | "length (0x%x)\n", dst, dma_len); |
| 138 | panic(); |
| 139 | } |
| 140 | |
| 141 | dma_start(dst, src, dma_len); |
| 142 | dma_end(); |
| 143 | } |
| 144 | |
| 145 | void rcar_dma_init(void) |
| 146 | { |
| 147 | dma_enable(); |
| 148 | dma_setup(); |
| 149 | } |