plat/fvp/fvp_def.h

/*
 * Copyright (c) 2014, ARM Limited and Contributors. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * Redistributions of source code must retain the above copyright notice, this
 * list of conditions and the following disclaimer.
 *
 * Redistributions in binary form must reproduce the above copyright notice,
 * this list of conditions and the following disclaimer in the documentation
 * and/or other materials provided with the distribution.
 *
 * Neither the name of ARM nor the names of its contributors may be used
 * to endorse or promote products derived from this software without specific
 * prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

#ifndef __FVP_DEF_H__
#define __FVP_DEF_H__

/* Firmware Image Package */
#define FIP_IMAGE_NAME			"fip.bin"
#define FVP_PRIMARY_CPU			0x0

/* Memory location options for Shared data and TSP in FVP */
#define FVP_IN_TRUSTED_SRAM		0
#define FVP_IN_TRUSTED_DRAM		1

/*******************************************************************************
 * FVP memory map related constants
 ******************************************************************************/

#define FVP_TRUSTED_ROM_BASE	0x00000000
#define FVP_TRUSTED_ROM_SIZE	0x04000000	/* 64 MB */

#define FVP_TRUSTED_SRAM_BASE	0x04000000
#define FVP_TRUSTED_SRAM_SIZE	0x00040000	/* 256 KB */

#define FVP_TRUSTED_DRAM_BASE	0x06000000
#define FVP_TRUSTED_DRAM_SIZE	0x02000000	/* 32 MB */

#define FLASH0_BASE		0x08000000
#define FLASH0_SIZE		0x04000000

#define FLASH1_BASE		0x0c000000
#define FLASH1_SIZE		0x04000000

#define PSRAM_BASE		0x14000000
#define PSRAM_SIZE		0x04000000

#define VRAM_BASE		0x18000000
#define VRAM_SIZE		0x02000000

/* Aggregate of all devices in the first GB */
#define DEVICE0_BASE		0x1a000000
#define DEVICE0_SIZE		0x12200000

#define DEVICE1_BASE		0x2f000000
#define DEVICE1_SIZE		0x200000

#define NSRAM_BASE		0x2e000000
#define NSRAM_SIZE		0x10000

#define MBOX_OFF		0x1000

/* Base address where parameters to BL31 are stored */
#define PARAMS_BASE		FVP_TRUSTED_DRAM_BASE

#define DRAM1_BASE		0x80000000ull
#define DRAM1_SIZE		0x80000000ull
#define DRAM1_END		(DRAM1_BASE + DRAM1_SIZE - 1)
#define DRAM1_SEC_SIZE		0x01000000ull

#define DRAM_BASE		DRAM1_BASE
#define DRAM_SIZE		DRAM1_SIZE

#define DRAM2_BASE		0x880000000ull
#define DRAM2_SIZE		0x780000000ull
#define DRAM2_END		(DRAM2_BASE + DRAM2_SIZE - 1)

#define PCIE_EXP_BASE		0x40000000
#define TZRNG_BASE		0x7fe60000
#define TZNVCTR_BASE		0x7fe70000
#define TZROOTKEY_BASE		0x7fe80000

/* Memory mapped Generic timer interfaces  */
#define SYS_CNTCTL_BASE		0x2a430000
#define SYS_CNTREAD_BASE	0x2a800000
#define SYS_TIMCTL_BASE		0x2a810000

/* V2M motherboard system registers & offsets */
#define VE_SYSREGS_BASE		0x1c010000
#define V2M_SYS_ID			0x0
#define V2M_SYS_LED			0x8
#define V2M_SYS_CFGDATA		0xa0
#define V2M_SYS_CFGCTRL		0xa4

/* Load address of BL33 in the FVP port */
#define NS_IMAGE_OFFSET		(DRAM1_BASE + 0x8000000) /* DRAM + 128MB */

/* Special value used to verify platform parameters from BL2 to BL3-1 */
#define FVP_BL31_PLAT_PARAM_VAL	0x0f1e2d3c4b5a6978ULL

/*
 * V2M sysled bit definitions. The values written to this
 * register are defined in arch.h & runtime_svc.h. Only
 * used by the primary cpu to diagnose any cold boot issues.
 *
 * SYS_LED[0]   - Security state (S=0/NS=1)
 * SYS_LED[2:1] - Exception Level (EL3-EL0)
 * SYS_LED[7:3] - Exception Class (Sync/Async & origin)
 *
 */
#define SYS_LED_SS_SHIFT		0x0
#define SYS_LED_EL_SHIFT		0x1
#define SYS_LED_EC_SHIFT		0x3

#define SYS_LED_SS_MASK		0x1
#define SYS_LED_EL_MASK		0x3
#define SYS_LED_EC_MASK		0x1f

/* V2M sysid register bits */
#define SYS_ID_REV_SHIFT	28
#define SYS_ID_HBI_SHIFT	16
#define SYS_ID_BLD_SHIFT	12
#define SYS_ID_ARCH_SHIFT	8
#define SYS_ID_FPGA_SHIFT	0

#define SYS_ID_REV_MASK	0xf
#define SYS_ID_HBI_MASK	0xfff
#define SYS_ID_BLD_MASK	0xf
#define SYS_ID_ARCH_MASK	0xf
#define SYS_ID_FPGA_MASK	0xff

#define SYS_ID_BLD_LENGTH	4

#define HBI_FVP_BASE		0x020
#define REV_FVP_BASE_V0		0x0

#define HBI_FOUNDATION		0x010
#define REV_FOUNDATION_V2_0	0x0
#define REV_FOUNDATION_V2_1	0x1

#define BLD_GIC_VE_MMAP	0x0
#define BLD_GIC_A53A57_MMAP	0x1

#define ARCH_MODEL		0x1

/* FVP Power controller base address*/
#define PWRC_BASE		0x1c100000


/*******************************************************************************
 * CCI-400 related constants
 ******************************************************************************/
#define CCI400_BASE			0x2c090000
#define CCI400_SL_IFACE_CLUSTER0	3
#define CCI400_SL_IFACE_CLUSTER1	4
#define CCI400_SL_IFACE_INDEX(mpidr)	(mpidr & MPIDR_CLUSTER_MASK ? \
					 CCI400_SL_IFACE_CLUSTER1 :   \
					 CCI400_SL_IFACE_CLUSTER0)

/*******************************************************************************
 * GIC-400 & interrupt handling related constants
 ******************************************************************************/
/* VE compatible GIC memory map */
#define VE_GICD_BASE			0x2c001000
#define VE_GICC_BASE			0x2c002000
#define VE_GICH_BASE			0x2c004000
#define VE_GICV_BASE			0x2c006000

/* Base FVP compatible GIC memory map */
#define BASE_GICD_BASE			0x2f000000
#define BASE_GICR_BASE			0x2f100000
#define BASE_GICC_BASE			0x2c000000
#define BASE_GICH_BASE			0x2c010000
#define BASE_GICV_BASE			0x2c02f000

#define IRQ_TZ_WDOG			56
#define IRQ_SEC_PHY_TIMER		29
#define IRQ_SEC_SGI_0			8
#define IRQ_SEC_SGI_1			9
#define IRQ_SEC_SGI_2			10
#define IRQ_SEC_SGI_3			11
#define IRQ_SEC_SGI_4			12
#define IRQ_SEC_SGI_5			13
#define IRQ_SEC_SGI_6			14
#define IRQ_SEC_SGI_7			15
#define IRQ_SEC_SGI_8			16

/*******************************************************************************
 * PL011 related constants
 ******************************************************************************/
#define PL011_UART0_BASE		0x1c090000
#define PL011_UART1_BASE		0x1c0a0000
#define PL011_UART2_BASE		0x1c0b0000
#define PL011_UART3_BASE		0x1c0c0000

#define PL011_BAUDRATE  115200

#define PL011_UART0_CLK_IN_HZ 24000000
#define PL011_UART1_CLK_IN_HZ 24000000
#define PL011_UART2_CLK_IN_HZ 24000000
#define PL011_UART3_CLK_IN_HZ 24000000

/*******************************************************************************
 * TrustZone address space controller related constants
 ******************************************************************************/
#define TZC400_BASE			0x2a4a0000

/*
 * The NSAIDs for this platform as used to program the TZC400.
 */

/* The FVP has 4 bits of NSAIDs. Used with TZC FAIL_ID (ACE Lite ID width) */
#define FVP_AID_WIDTH			4

/* NSAIDs used by devices in TZC filter 0 on FVP */
#define FVP_NSAID_DEFAULT		0
#define FVP_NSAID_PCI			1
#define FVP_NSAID_VIRTIO		8  /* from FVP v5.6 onwards */
#define FVP_NSAID_AP			9  /* Application Processors */
#define FVP_NSAID_VIRTIO_OLD		15 /* until FVP v5.5 */

/* NSAIDs used by devices in TZC filter 2 on FVP */
#define FVP_NSAID_HDLCD0		2
#define FVP_NSAID_CLCD			7

#endif /* __FVP_DEF_H__ */