blob: ce6cdcf56935b3a3a30f997ae4b84b778f909522 [file] [log] [blame]
Achin Gupta4f6ad662013-10-25 09:08:21 +01001/*
Dan Handleye83b0ca2014-01-14 18:17:09 +00002 * Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
Achin Gupta4f6ad662013-10-25 09:08:21 +01003 *
4 * Redistribution and use in source and binary forms, with or without
5 * modification, are permitted provided that the following conditions are met:
6 *
7 * Redistributions of source code must retain the above copyright notice, this
8 * list of conditions and the following disclaimer.
9 *
10 * Redistributions in binary form must reproduce the above copyright notice,
11 * this list of conditions and the following disclaimer in the documentation
12 * and/or other materials provided with the distribution.
13 *
14 * Neither the name of ARM nor the names of its contributors may be used
15 * to endorse or promote products derived from this software without specific
16 * prior written permission.
17 *
18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
19 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
22 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
23 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
24 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
25 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
26 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
27 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
28 * POSSIBILITY OF SUCH DAMAGE.
29 */
30
31#ifndef __PL011_H__
32#define __PL011_H__
33
34/* PL011 Registers */
35#define UARTDR 0x000
36#define UARTRSR 0x004
37#define UARTECR 0x004
38#define UARTFR 0x018
Juan Castillo7ac4b112015-11-16 16:53:38 +000039#define UARTIMSC 0x038
40#define UARTRIS 0x03C
41#define UARTICR 0x044
42
43/* PL011 registers (out of the SBSA specification) */
44#if !PL011_GENERIC_UART
Achin Gupta4f6ad662013-10-25 09:08:21 +010045#define UARTILPR 0x020
46#define UARTIBRD 0x024
47#define UARTFBRD 0x028
48#define UARTLCR_H 0x02C
49#define UARTCR 0x030
50#define UARTIFLS 0x034
Achin Gupta4f6ad662013-10-25 09:08:21 +010051#define UARTMIS 0x040
Achin Gupta4f6ad662013-10-25 09:08:21 +010052#define UARTDMACR 0x048
Juan Castillo7ac4b112015-11-16 16:53:38 +000053#endif /* !PL011_GENERIC_UART */
Achin Gupta4f6ad662013-10-25 09:08:21 +010054
55/* Data status bits */
56#define UART_DATA_ERROR_MASK 0x0F00
57
58/* Status reg bits */
59#define UART_STATUS_ERROR_MASK 0x0F
60
61/* Flag reg bits */
62#define PL011_UARTFR_RI (1 << 8) /* Ring indicator */
63#define PL011_UARTFR_TXFE (1 << 7) /* Transmit FIFO empty */
64#define PL011_UARTFR_RXFF (1 << 6) /* Receive FIFO full */
65#define PL011_UARTFR_TXFF (1 << 5) /* Transmit FIFO full */
66#define PL011_UARTFR_RXFE (1 << 4) /* Receive FIFO empty */
67#define PL011_UARTFR_BUSY (1 << 3) /* UART busy */
68#define PL011_UARTFR_DCD (1 << 2) /* Data carrier detect */
69#define PL011_UARTFR_DSR (1 << 1) /* Data set ready */
70#define PL011_UARTFR_CTS (1 << 0) /* Clear to send */
71
Soby Mathewc389d772014-06-24 12:28:41 +010072#define PL011_UARTFR_TXFF_BIT 5 /* Transmit FIFO full bit in UARTFR register */
73#define PL011_UARTFR_RXFE_BIT 4 /* Receive FIFO empty bit in UARTFR register */
Juan Castilloe7ae6db2015-11-26 14:52:15 +000074#define PL011_UARTFR_BUSY_BIT 3 /* UART busy bit in UARTFR register */
Soby Mathewc389d772014-06-24 12:28:41 +010075
Achin Gupta4f6ad662013-10-25 09:08:21 +010076/* Control reg bits */
Juan Castillo7ac4b112015-11-16 16:53:38 +000077#if !PL011_GENERIC_UART
Achin Gupta4f6ad662013-10-25 09:08:21 +010078#define PL011_UARTCR_CTSEN (1 << 15) /* CTS hardware flow control enable */
79#define PL011_UARTCR_RTSEN (1 << 14) /* RTS hardware flow control enable */
80#define PL011_UARTCR_RTS (1 << 11) /* Request to send */
81#define PL011_UARTCR_DTR (1 << 10) /* Data transmit ready. */
82#define PL011_UARTCR_RXE (1 << 9) /* Receive enable */
83#define PL011_UARTCR_TXE (1 << 8) /* Transmit enable */
84#define PL011_UARTCR_LBE (1 << 7) /* Loopback enable */
85#define PL011_UARTCR_UARTEN (1 << 0) /* UART Enable */
86
Achin Gupta4f6ad662013-10-25 09:08:21 +010087#if !defined(PL011_LINE_CONTROL)
88/* FIFO Enabled / No Parity / 8 Data bit / One Stop Bit */
89#define PL011_LINE_CONTROL (PL011_UARTLCR_H_FEN | PL011_UARTLCR_H_WLEN_8)
90#endif
91
92/* Line Control Register Bits */
93#define PL011_UARTLCR_H_SPS (1 << 7) /* Stick parity select */
94#define PL011_UARTLCR_H_WLEN_8 (3 << 5)
95#define PL011_UARTLCR_H_WLEN_7 (2 << 5)
96#define PL011_UARTLCR_H_WLEN_6 (1 << 5)
97#define PL011_UARTLCR_H_WLEN_5 (0 << 5)
98#define PL011_UARTLCR_H_FEN (1 << 4) /* FIFOs Enable */
99#define PL011_UARTLCR_H_STP2 (1 << 3) /* Two stop bits select */
100#define PL011_UARTLCR_H_EPS (1 << 2) /* Even parity select */
101#define PL011_UARTLCR_H_PEN (1 << 1) /* Parity Enable */
102#define PL011_UARTLCR_H_BRK (1 << 0) /* Send break */
103
Juan Castillo7ac4b112015-11-16 16:53:38 +0000104#endif /* !PL011_GENERIC_UART */
105
Achin Gupta4f6ad662013-10-25 09:08:21 +0100106#endif /* __PL011_H__ */