| /* |
| * Copyright (c) 2019-2023, ARM Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #ifndef PLAT_SOCFPGA_DEF_H |
| #define PLAT_SOCFPGA_DEF_H |
| |
| #include <platform_def.h> |
| #include "s10_system_manager.h" |
| |
| /* Platform Setting */ |
| #define PLATFORM_MODEL PLAT_SOCFPGA_STRATIX10 |
| #define BOOT_SOURCE BOOT_SOURCE_SDMMC |
| #define PLAT_PRIMARY_CPU 0 |
| #define PLAT_CLUSTER_ID_MPIDR_AFF_SHIFT MPIDR_AFF1_SHIFT |
| #define PLAT_CPU_ID_MPIDR_AFF_SHIFT MPIDR_AFF0_SHIFT |
| |
| /* FPGA config helpers */ |
| #define INTEL_SIP_SMC_FPGA_CONFIG_ADDR 0x400000 |
| #define INTEL_SIP_SMC_FPGA_CONFIG_SIZE 0x1000000 |
| |
| /* QSPI Setting */ |
| #define CAD_QSPIDATA_OFST 0xff900000 |
| #define CAD_QSPI_OFFSET 0xff8d2000 |
| |
| /* Register Mapping */ |
| #define SOCFPGA_CCU_NOC_REG_BASE 0xf7000000 |
| #define SOCFPGA_F2SDRAMMGR_REG_BASE U(0xf8024000) |
| |
| #define SOCFPGA_MMC_REG_BASE 0xff808000 |
| |
| #define SOCFPGA_RSTMGR_REG_BASE 0xffd11000 |
| #define SOCFPGA_SYSMGR_REG_BASE 0xffd12000 |
| |
| #define SOCFPGA_L4_PER_SCR_REG_BASE 0xffd21000 |
| #define SOCFPGA_L4_SYS_SCR_REG_BASE 0xffd21100 |
| #define SOCFPGA_SOC2FPGA_SCR_REG_BASE 0xffd21200 |
| #define SOCFPGA_LWSOC2FPGA_SCR_REG_BASE 0xffd21300 |
| |
| /******************************************************************************* |
| * Platform memory map related constants |
| ******************************************************************************/ |
| #define DRAM_BASE (0x0) |
| #define DRAM_SIZE (0x80000000) |
| |
| #define OCRAM_BASE (0xFFE00000) |
| #define OCRAM_SIZE (0x00040000) |
| |
| #define MEM64_BASE (0x0100000000) |
| #define MEM64_SIZE (0x1F00000000) |
| |
| #define DEVICE1_BASE (0x80000000) |
| #define DEVICE1_SIZE (0x60000000) |
| |
| #define DEVICE2_BASE (0xF7000000) |
| #define DEVICE2_SIZE (0x08E00000) |
| |
| #define DEVICE3_BASE (0xFFFC0000) |
| #define DEVICE3_SIZE (0x00008000) |
| |
| #define DEVICE4_BASE (0x2000000000) |
| #define DEVICE4_SIZE (0x0100000000) |
| |
| #define BL2_BASE (0xffe00000) |
| #define BL2_LIMIT (0xffe1b000) |
| |
| #define BL31_BASE (0x1000) |
| #define BL31_LIMIT (0x81000) |
| |
| /******************************************************************************* |
| * UART related constants |
| ******************************************************************************/ |
| #define PLAT_UART0_BASE (0xFFC02000) |
| #define PLAT_UART1_BASE (0xFFC02100) |
| |
| /******************************************************************************* |
| * GIC related constants |
| ******************************************************************************/ |
| #define PLAT_GIC_BASE (0xFFFC0000) |
| #define PLAT_GICC_BASE (PLAT_GIC_BASE + 0x2000) |
| #define PLAT_GICD_BASE (PLAT_GIC_BASE + 0x1000) |
| #define PLAT_GICR_BASE 0 |
| |
| #define PLAT_SYS_COUNTER_FREQ_IN_TICKS (get_mpu_periph_clk() * PLAT_HZ_CONVERT_TO_MHZ) |
| #define PLAT_HZ_CONVERT_TO_MHZ (1000000) |
| |
| /******************************************************************************* |
| * SDMMC related pointer function |
| ******************************************************************************/ |
| #define SDMMC_READ_BLOCKS mmc_read_blocks |
| #define SDMMC_WRITE_BLOCKS mmc_write_blocks |
| |
| /******************************************************************************* |
| * sysmgr.boot_scratch_cold6 & 7 (64bit) are used to indicate L2 reset |
| * is done and HPS should trigger warm reset via RMR_EL3. |
| ******************************************************************************/ |
| #define L2_RESET_DONE_REG 0xFFD12218 |
| |
| /* Platform specific system counter */ |
| #define PLAT_SYS_COUNTER_FREQ_IN_MHZ get_mpu_periph_clk() |
| |
| #endif /* PLATSOCFPGA_DEF_H */ |
| |