| /* |
| * Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <arch.h> |
| #include <arch_helpers.h> |
| #include <assert.h> |
| #include <common_def.h> |
| #include <context.h> |
| #include <context_mgmt.h> |
| #include <debug.h> |
| #include <platform_def.h> |
| #include <platform.h> |
| #include <string.h> |
| #include <xlat_tables_v2.h> |
| |
| #include "spm_private.h" |
| #include "spm_shim_private.h" |
| |
| /* Setup context of the Secure Partition */ |
| void spm_sp_setup(sp_context_t *sp_ctx) |
| { |
| cpu_context_t *ctx = &(sp_ctx->cpu_ctx); |
| |
| /* |
| * Initialize CPU context |
| * ---------------------- |
| */ |
| |
| entry_point_info_t ep_info = {0}; |
| |
| SET_PARAM_HEAD(&ep_info, PARAM_EP, VERSION_1, SECURE | EP_ST_ENABLE); |
| |
| /* Setup entrypoint and SPSR */ |
| ep_info.pc = BL32_BASE; |
| ep_info.spsr = SPSR_64(MODE_EL0, MODE_SP_EL0, DISABLE_ALL_EXCEPTIONS); |
| |
| /* |
| * X0: Unused (MBZ). |
| * X1: Unused (MBZ). |
| * X2: cookie value (Implementation Defined) |
| * X3: cookie value (Implementation Defined) |
| * X4 to X7 = 0 |
| */ |
| ep_info.args.arg0 = 0; |
| ep_info.args.arg1 = 0; |
| ep_info.args.arg2 = PLAT_SPM_COOKIE_0; |
| ep_info.args.arg3 = PLAT_SPM_COOKIE_1; |
| |
| cm_setup_context(ctx, &ep_info); |
| |
| /* |
| * Setup translation tables |
| * ------------------------ |
| */ |
| |
| /* This region contains the exception vectors used at S-EL1. */ |
| const mmap_region_t sel1_exception_vectors = |
| MAP_REGION_FLAT(SPM_SHIM_EXCEPTIONS_START, |
| SPM_SHIM_EXCEPTIONS_SIZE, |
| MT_CODE | MT_SECURE | MT_PRIVILEGED); |
| mmap_add_region_ctx(sp_ctx->xlat_ctx_handle, |
| &sel1_exception_vectors); |
| |
| mmap_add_ctx(sp_ctx->xlat_ctx_handle, |
| plat_get_secure_partition_mmap(NULL)); |
| |
| init_xlat_tables_ctx(sp_ctx->xlat_ctx_handle); |
| |
| /* |
| * MMU-related registers |
| * --------------------- |
| */ |
| xlat_ctx_t *xlat_ctx = sp_ctx->xlat_ctx_handle; |
| |
| uint64_t mmu_cfg_params[MMU_CFG_PARAM_MAX]; |
| |
| setup_mmu_cfg((uint64_t *)&mmu_cfg_params, 0, xlat_ctx->base_table, |
| xlat_ctx->pa_max_address, xlat_ctx->va_max_address, |
| EL1_EL0_REGIME); |
| |
| write_ctx_reg(get_sysregs_ctx(ctx), CTX_MAIR_EL1, |
| mmu_cfg_params[MMU_CFG_MAIR]); |
| |
| write_ctx_reg(get_sysregs_ctx(ctx), CTX_TCR_EL1, |
| mmu_cfg_params[MMU_CFG_TCR]); |
| |
| write_ctx_reg(get_sysregs_ctx(ctx), CTX_TTBR0_EL1, |
| mmu_cfg_params[MMU_CFG_TTBR0]); |
| |
| /* Setup SCTLR_EL1 */ |
| u_register_t sctlr_el1 = read_ctx_reg(get_sysregs_ctx(ctx), CTX_SCTLR_EL1); |
| |
| sctlr_el1 |= |
| /*SCTLR_EL1_RES1 |*/ |
| /* Don't trap DC CVAU, DC CIVAC, DC CVAC, DC CVAP, or IC IVAU */ |
| SCTLR_UCI_BIT | |
| /* RW regions at xlat regime EL1&0 are forced to be XN. */ |
| SCTLR_WXN_BIT | |
| /* Don't trap to EL1 execution of WFI or WFE at EL0. */ |
| SCTLR_NTWI_BIT | SCTLR_NTWE_BIT | |
| /* Don't trap to EL1 accesses to CTR_EL0 from EL0. */ |
| SCTLR_UCT_BIT | |
| /* Don't trap to EL1 execution of DZ ZVA at EL0. */ |
| SCTLR_DZE_BIT | |
| /* Enable SP Alignment check for EL0 */ |
| SCTLR_SA0_BIT | |
| /* Allow cacheable data and instr. accesses to normal memory. */ |
| SCTLR_C_BIT | SCTLR_I_BIT | |
| /* Alignment fault checking enabled when at EL1 and EL0. */ |
| SCTLR_A_BIT | |
| /* Enable MMU. */ |
| SCTLR_M_BIT |
| ; |
| |
| sctlr_el1 &= ~( |
| /* Explicit data accesses at EL0 are little-endian. */ |
| SCTLR_E0E_BIT | |
| /* Accesses to DAIF from EL0 are trapped to EL1. */ |
| SCTLR_UMA_BIT |
| ); |
| |
| write_ctx_reg(get_sysregs_ctx(ctx), CTX_SCTLR_EL1, sctlr_el1); |
| |
| /* |
| * Setup other system registers |
| * ---------------------------- |
| */ |
| |
| /* Shim Exception Vector Base Address */ |
| write_ctx_reg(get_sysregs_ctx(ctx), CTX_VBAR_EL1, |
| SPM_SHIM_EXCEPTIONS_PTR); |
| |
| /* |
| * FPEN: Allow the Secure Partition to access FP/SIMD registers. |
| * Note that SPM will not do any saving/restoring of these registers on |
| * behalf of the SP. This falls under the SP's responsibility. |
| * TTA: Enable access to trace registers. |
| * ZEN (v8.2): Trap SVE instructions and access to SVE registers. |
| */ |
| write_ctx_reg(get_sysregs_ctx(ctx), CTX_CPACR_EL1, |
| CPACR_EL1_FPEN(CPACR_EL1_FP_TRAP_NONE)); |
| } |