| # |
| # Copyright 2017-2021 NXP |
| # |
| # SPDX-License-Identifier: BSD-3-Clause |
| # |
| # |
| #------------------------------------------------------------------------------ |
| # |
| # This file contains the basic architecture definitions that drive the build |
| # |
| # ----------------------------------------------------------------------------- |
| |
| CORE_TYPE := a53 |
| |
| CACHE_LINE := 6 |
| |
| # set to GIC400 or GIC500 |
| GIC := GIC400 |
| |
| # set to CCI400 or CCN504 or CCN508 |
| INTERCONNECT := CCI400 |
| |
| # indicate layerscape chassis level - set to 3=LSCH3 or 2=LSCH2 |
| CHASSIS := 2 |
| |
| # TZC IP Details TZC used is TZC380 or TZC400 |
| TZC_ID := TZC380 |
| |
| # CONSOLE Details available is NS16550 or PL011 |
| CONSOLE := NS16550 |
| |
| # Select the DDR PHY generation to be used |
| PLAT_DDR_PHY := PHY_GEN1 |
| |
| PHYS_SYS := 64 |
| |
| # ddr controller - set to MMDC or NXP |
| DDRCNTLR := NXP |
| |
| # ddr phy - set to NXP or SNPS |
| DDRPHY := NXP |
| |
| # Area of OCRAM reserved by ROM code |
| NXP_ROM_RSVD := 0x5900 |
| |
| # Max Size of CSF header. Required to define BL2 TEXT LIMIT in soc.def |
| # Input to CST create_hdr_esbc tool |
| CSF_HDR_SZ := 0x3000 |
| |
| # In IMAGE_BL2, compile time flag for handling Cache coherency |
| # with CAAM for BL2 running from OCRAM |
| SEC_MEM_NON_COHERENT := yes |
| |
| # OCRAM MAP |
| OCRAM_START_ADDR := 0x10000000 |
| OCRAM_SIZE := 0x20000 |
| |
| # BL2 binary is placed at start of OCRAM. |
| # Also used by create_pbl.mk. |
| BL2_BASE := 0x10000000 |
| |
| # After BL2 bin, OCRAM is used by ROM Code: |
| # (OCRAM_START_ADDR + BL2_BIN_SIZE) -> (NXP_ROM_RSVD - 1) |
| |
| # After ROM Code, OCRAM is used by CSF header. |
| # (OCRAM_START_ADDR + BL2_TEXT_LIMIT + NXP_ROM_RSVD) -> (CSF_HDR_SZ - 1) |
| |
| # BL2_HDR_LOC has to be (OCRAM_START_ADDR + OCRAM_SIZE - NXP_ROM_RSVD - CSF_HDR_SZ) |
| # This value should be greater than BL2_TEXT_LIMIT |
| # Input to CST create_hdr_isbc tool |
| BL2_HDR_LOC_HDR ?= $(shell echo $$(( $(OCRAM_START_ADDR) + $(OCRAM_SIZE) - $(NXP_ROM_RSVD) - $(CSF_HDR_SZ)))) |
| # Covert to HEX to be used by create_pbl.mk |
| BL2_HDR_LOC := $$(echo "obase=16; ${BL2_HDR_LOC_HDR}" | bc) |
| |
| # Core Errata |
| ERRATA_A53_855873 := 1 |
| ERRATA_A53_1530924 := 1 |
| |
| # SoC ERRATAS to be enabled |
| ERRATA_SOC_A008850 := 1 |
| ERRATA_SOC_A010539 := 1 |
| ERRATA_SOC_A009660 := 1 |
| |
| # DDR Errata |
| ERRATA_DDR_A009663 := 1 |
| ERRATA_DDR_A009942 := 1 |
| |
| # enable dynamic memory mapping |
| PLAT_XLAT_TABLES_DYNAMIC := 1 |
| |
| # Define Endianness of each module |
| NXP_GUR_ENDIANNESS := BE |
| NXP_DDR_ENDIANNESS := BE |
| NXP_SEC_ENDIANNESS := BE |
| NXP_SFP_ENDIANNESS := BE |
| NXP_SNVS_ENDIANNESS := BE |
| NXP_ESDHC_ENDIANNESS := BE |
| NXP_QSPI_ENDIANNESS := BE |
| NXP_FSPI_ENDIANNESS := BE |
| NXP_SCFG_ENDIANNESS := BE |
| NXP_GPIO_ENDIANNESS := BE |
| NXP_IFC_ENDIANNESS := BE |
| |
| NXP_SFP_VER := 3_2 |
| |
| # OCRAM ECC Enabled |
| OCRAM_ECC_EN := yes |