| /* |
| * Copyright (c) 2021-2023, Arm Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <stdbool.h> |
| |
| #include <arch.h> |
| #include <arch_features.h> |
| #include <arch_helpers.h> |
| #include <common/debug.h> |
| #include <lib/el3_runtime/context_mgmt.h> |
| #include <lib/extensions/sme.h> |
| #include <lib/extensions/sve.h> |
| |
| void sme_enable(cpu_context_t *context) |
| { |
| u_register_t reg; |
| el3_state_t *state; |
| |
| /* Get the context state. */ |
| state = get_el3state_ctx(context); |
| |
| /* Set the ENTP2 bit in SCR_EL3 to enable access to TPIDR2_EL0. */ |
| reg = read_ctx_reg(state, CTX_SCR_EL3); |
| reg |= SCR_ENTP2_BIT; |
| write_ctx_reg(state, CTX_SCR_EL3, reg); |
| } |
| |
| void sme_enable_per_world(per_world_context_t *per_world_ctx) |
| { |
| u_register_t reg; |
| |
| /* Enable SME in CPTR_EL3. */ |
| reg = per_world_ctx->ctx_cptr_el3; |
| reg |= ESM_BIT; |
| per_world_ctx->ctx_cptr_el3 = reg; |
| } |
| |
| void sme_init_el3(void) |
| { |
| u_register_t cptr_el3 = read_cptr_el3(); |
| u_register_t smcr_el3; |
| |
| /* Set CPTR_EL3.ESM bit so we can access SMCR_EL3 without trapping. */ |
| write_cptr_el3(cptr_el3 | ESM_BIT); |
| isb(); |
| |
| /* |
| * Set the max LEN value and FA64 bit. This register is set up per_world |
| * to be the least restrictive, then lower ELs can restrict as needed |
| * using SMCR_EL2 and SMCR_EL1. |
| */ |
| smcr_el3 = SMCR_ELX_LEN_MAX; |
| if (read_feat_sme_fa64_id_field() != 0U) { |
| VERBOSE("[SME] FA64 enabled\n"); |
| smcr_el3 |= SMCR_ELX_FA64_BIT; |
| } |
| |
| /* |
| * Enable access to ZT0 register. |
| * Make sure FEAT_SME2 is supported by the hardware before continuing. |
| * If supported, Set the EZT0 bit in SMCR_EL3 to allow instructions to |
| * access ZT0 register without trapping. |
| */ |
| if (is_feat_sme2_supported()) { |
| VERBOSE("SME2 enabled\n"); |
| smcr_el3 |= SMCR_ELX_EZT0_BIT; |
| } |
| write_smcr_el3(smcr_el3); |
| |
| /* Reset CPTR_EL3 value. */ |
| write_cptr_el3(cptr_el3); |
| isb(); |
| } |
| |
| void sme_init_el2_unused(void) |
| { |
| /* |
| * CPTR_EL2.TCPAC: Set to zero so that Non-secure EL1 accesses to the |
| * CPACR_EL1 or CPACR from both Execution states do not trap to EL2. |
| */ |
| write_cptr_el2(read_cptr_el2() & ~CPTR_EL2_TCPAC_BIT); |
| } |
| |
| void sme_disable(cpu_context_t *context) |
| { |
| u_register_t reg; |
| el3_state_t *state; |
| |
| /* Get the context state. */ |
| state = get_el3state_ctx(context); |
| |
| /* Disable access to TPIDR2_EL0. */ |
| reg = read_ctx_reg(state, CTX_SCR_EL3); |
| reg &= ~SCR_ENTP2_BIT; |
| write_ctx_reg(state, CTX_SCR_EL3, reg); |
| } |
| |
| void sme_disable_per_world(per_world_context_t *per_world_ctx) |
| { |
| u_register_t reg; |
| |
| /* Disable SME, SVE, and FPU since they all share registers. */ |
| reg = per_world_ctx->ctx_cptr_el3; |
| reg &= ~ESM_BIT; /* Trap SME */ |
| reg &= ~CPTR_EZ_BIT; /* Trap SVE */ |
| reg |= TFP_BIT; /* Trap FPU/SIMD */ |
| per_world_ctx->ctx_cptr_el3 = reg; |
| } |