| STM32MP1 |
| ======== |
| |
| STM32MP1 is a microprocessor designed by STMicroelectronics |
| based on Arm Cortex-A7. |
| It is an Armv7-A platform, using dedicated code from TF-A. |
| More information can be found on `STM32MP1 Series`_ page. |
| |
| For TF-A common configuration of STM32 MPUs, please check |
| :ref:`STM32 MPUs` page. |
| |
| STM32MP1 Versions |
| ----------------- |
| |
| There are 2 variants for STM32MP1: STM32MP13 and STM32MP15 |
| |
| STM32MP13 Versions |
| ~~~~~~~~~~~~~~~~~~ |
| The STM32MP13 series is available in 3 different lines which are pin-to-pin compatible: |
| |
| - STM32MP131: Single Cortex-A7 core |
| - STM32MP133: STM32MP131 + 2*CAN, ETH2(GMAC), ADC1 |
| - STM32MP135: STM32MP133 + DCMIPP, LTDC |
| |
| Each line comes with a security option (cryptography & secure boot) and a Cortex-A frequency option: |
| |
| - A Cortex-A7 @ 650 MHz |
| - C Secure Boot + HW Crypto + Cortex-A7 @ 650 MHz |
| - D Cortex-A7 @ 900 MHz |
| - F Secure Boot + HW Crypto + Cortex-A7 @ 900 MHz |
| |
| STM32MP15 Versions |
| ~~~~~~~~~~~~~~~~~~ |
| The STM32MP15 series is available in 3 different lines which are pin-to-pin compatible: |
| |
| - STM32MP157: Dual Cortex-A7 cores, Cortex-M4 core @ 209 MHz, 3D GPU, DSI display interface and CAN FD |
| - STM32MP153: Dual Cortex-A7 cores, Cortex-M4 core @ 209 MHz and CAN FD |
| - STM32MP151: Single Cortex-A7 core, Cortex-M4 core @ 209 MHz |
| |
| Each line comes with a security option (cryptography & secure boot) and a Cortex-A frequency option: |
| |
| - A Basic + Cortex-A7 @ 650 MHz |
| - C Secure Boot + HW Crypto + Cortex-A7 @ 650 MHz |
| - D Basic + Cortex-A7 @ 800 MHz |
| - F Secure Boot + HW Crypto + Cortex-A7 @ 800 MHz |
| |
| The `STM32MP1 part number codification`_ page gives more information about part numbers. |
| |
| Memory mapping |
| -------------- |
| |
| :: |
| |
| 0x00000000 +-----------------+ |
| | | ROM |
| 0x00020000 +-----------------+ |
| | | |
| | ... | |
| | | |
| 0x2FFC0000 +-----------------+ \ |
| | BL32 DTB | | |
| 0x2FFC5000 +-----------------+ | |
| | BL32 | | |
| 0x2FFDF000 +-----------------+ | |
| | ... | | |
| 0x2FFE3000 +-----------------+ | |
| | BL2 DTB | | Embedded SRAM |
| 0x2FFEA000 +-----------------+ | |
| | BL2 | | |
| 0x2FFFF000 +-----------------+ | |
| | SCMI mailbox | | |
| 0x30000000 +-----------------+ / |
| | | |
| | ... | |
| | | |
| 0x40000000 +-----------------+ |
| | | |
| | | Devices |
| | | |
| 0xC0000000 +-----------------+ \ |
| | | | |
| 0xC0100000 +-----------------+ | |
| | BL33 | | Non-secure RAM (DDR) |
| | ... | | |
| | | | |
| 0xFFFFFFFF +-----------------+ / |
| |
| |
| Build Instructions |
| ------------------ |
| |
| STM32MP1x specific flags |
| ~~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| Dedicated STM32MP1 flags: |
| |
| - | ``STM32_TF_VERSION``: to manage BL2 monotonic counter. |
| | Default: 0 |
| - | ``STM32MP13``: to select STM32MP13 variant configuration. |
| | Default: 0 |
| - | ``STM32MP15``: to select STM32MP15 variant configuration. |
| | Default: 1 |
| |
| |
| Boot with FIP |
| ~~~~~~~~~~~~~ |
| You need to build BL2, BL32 (SP_min or OP-TEE) and BL33 (U-Boot) before building FIP binary. |
| |
| U-Boot |
| ______ |
| |
| .. code:: bash |
| |
| cd <u-boot_directory> |
| make stm32mp15_trusted_defconfig |
| make DEVICE_TREE=stm32mp157c-ev1 all |
| |
| OP-TEE (optional) |
| _________________ |
| |
| .. code:: bash |
| |
| cd <optee_directory> |
| make CROSS_COMPILE=arm-linux-gnueabihf- ARCH=arm PLATFORM=stm32mp1 \ |
| CFG_EMBED_DTB_SOURCE_FILE=stm32mp157c-ev1.dts |
| |
| |
| TF-A BL32 (SP_min) |
| __________________ |
| If you choose not to use OP-TEE, you can use TF-A SP_min. |
| To build TF-A BL32, and its device tree file: |
| |
| .. code:: bash |
| |
| make CROSS_COMPILE=arm-none-eabi- PLAT=stm32mp1 ARCH=aarch32 ARM_ARCH_MAJOR=7 \ |
| AARCH32_SP=sp_min DTB_FILE_NAME=stm32mp157c-ev1.dtb bl32 dtbs |
| |
| TF-A BL2 |
| ________ |
| To build TF-A BL2 with its STM32 header for SD-card boot: |
| |
| .. code:: bash |
| |
| make CROSS_COMPILE=arm-none-eabi- PLAT=stm32mp1 ARCH=aarch32 ARM_ARCH_MAJOR=7 \ |
| DTB_FILE_NAME=stm32mp157c-ev1.dtb STM32MP_SDMMC=1 |
| |
| For other boot devices, you have to replace STM32MP_SDMMC in the previous command |
| with the desired device flag. |
| |
| This BL2 is independent of the BL32 used (SP_min or OP-TEE) |
| |
| |
| FIP |
| ___ |
| With BL32 SP_min: |
| |
| .. code:: bash |
| |
| make CROSS_COMPILE=arm-none-eabi- PLAT=stm32mp1 ARCH=aarch32 ARM_ARCH_MAJOR=7 \ |
| AARCH32_SP=sp_min \ |
| DTB_FILE_NAME=stm32mp157c-ev1.dtb \ |
| BL33=<u-boot_directory>/u-boot-nodtb.bin \ |
| BL33_CFG=<u-boot_directory>/u-boot.dtb \ |
| fip |
| |
| With OP-TEE: |
| |
| .. code:: bash |
| |
| make CROSS_COMPILE=arm-none-eabi- PLAT=stm32mp1 ARCH=aarch32 ARM_ARCH_MAJOR=7 \ |
| AARCH32_SP=optee \ |
| DTB_FILE_NAME=stm32mp157c-ev1.dtb \ |
| BL33=<u-boot_directory>/u-boot-nodtb.bin \ |
| BL33_CFG=<u-boot_directory>/u-boot.dtb \ |
| BL32=<optee_directory>/tee-header_v2.bin \ |
| BL32_EXTRA1=<optee_directory>/tee-pager_v2.bin |
| BL32_EXTRA2=<optee_directory>/tee-pageable_v2.bin |
| fip |
| |
| Trusted Boot Board |
| __________________ |
| |
| .. code:: shell |
| |
| tools/cert_create/cert_create -n --rot-key build/stm32mp1/release/rot_key.pem \ |
| --tfw-nvctr 0 \ |
| --ntfw-nvctr 0 \ |
| --key-alg ecdsa --hash-alg sha256 \ |
| --trusted-key-cert build/stm32mp1/release/trusted_key.crt \ |
| --tos-fw <optee_directory>/tee-header_v2.bin \ |
| --tos-fw-extra1 <optee_directory>/tee-pager_v2.bin \ |
| --tos-fw-extra2 <optee_directory>/tee-pageable_v2.bin \ |
| --tos-fw-cert build/stm32mp1/release/tos_fw_content.crt \ |
| --tos-fw-key-cert build/stm32mp1/release/tos_fw_key.crt \ |
| --nt-fw <u-boot_directory>/u-boot-nodtb.bin \ |
| --nt-fw-cert build/stm32mp1/release/nt_fw_content.crt \ |
| --nt-fw-key-cert build/stm32mp1/release/nt_fw_key.crt \ |
| --hw-config <u-boot_directory>/u-boot.dtb \ |
| --fw-config build/stm32mp1/release/fdts/fw-config.dtb \ |
| --stm32mp-cfg-cert build/stm32mp1/release/stm32mp_cfg_cert.crt |
| |
| tools/fiptool/fiptool create --tos-fw <optee_directory>/tee-header_v2.bin \ |
| --tos-fw-extra1 <optee_directory>/tee-pager_v2.bin \ |
| --tos-fw-extra2 <optee_directory>/tee-pageable_v2.bin \ |
| --nt-fw <u-boot_directory>/u-boot-nodtb.bin \ |
| --hw-config <u-boot_directory>/u-boot.dtb \ |
| --fw-config build/stm32mp1/release/fdts/fw-config.dtb \ |
| --trusted-key-cert build/stm32mp1/release/trusted_key.crt \ |
| --tos-fw-cert build/stm32mp1/release/tos_fw_content.crt \ |
| --tos-fw-key-cert build/stm32mp1/release/tos_fw_key.crt \ |
| --nt-fw-cert build/stm32mp1/release/nt_fw_content.crt \ |
| --nt-fw-key-cert build/stm32mp1/release/nt_fw_key.crt \ |
| --stm32mp-cfg-cert build/stm32mp1/release/stm32mp_cfg_cert.crt \ |
| build/stm32mp1/release/stm32mp1.fip |
| |
| |
| .. _STM32MP1 Series: https://www.st.com/en/microcontrollers-microprocessors/stm32mp1-series.html |
| .. _STM32MP1 part number codification: https://wiki.st.com/stm32mpu/wiki/STM32MP15_microprocessor#Part_number_codification |
| |
| *Copyright (c) 2023, STMicroelectronics - All Rights Reserved* |