blob: 46f7ae0e5e1432499cbbbca3667806a64952265a [file] [log] [blame]
/*
* Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <arch.h>
#include <arch_helpers.h>
#include <arm_def.h>
#include <assert.h>
#include <bl_common.h>
#include <console.h>
#include <debug.h>
#include <mmio.h>
#include <plat_arm.h>
#include <platform.h>
#include <ras.h>
#define BL31_END (uintptr_t)(&__BL31_END__)
/*
* Placeholder variables for copying the arguments that have been passed to
* BL31 from BL2.
*/
static entry_point_info_t bl32_image_ep_info;
static entry_point_info_t bl33_image_ep_info;
/*
* Check that BL31_BASE is above ARM_TB_FW_CONFIG_LIMIT. The reserved page
* is required for SOC_FW_CONFIG/TOS_FW_CONFIG passed from BL2.
*/
CASSERT(BL31_BASE >= ARM_TB_FW_CONFIG_LIMIT, assert_bl31_base_overflows);
/* Weak definitions may be overridden in specific ARM standard platform */
#pragma weak bl31_early_platform_setup2
#pragma weak bl31_platform_setup
#pragma weak bl31_plat_arch_setup
#pragma weak bl31_plat_get_next_image_ep_info
/*******************************************************************************
* Return a pointer to the 'entry_point_info' structure of the next image for the
* security state specified. BL33 corresponds to the non-secure image type
* while BL32 corresponds to the secure image type. A NULL pointer is returned
* if the image does not exist.
******************************************************************************/
entry_point_info_t *bl31_plat_get_next_image_ep_info(uint32_t type)
{
entry_point_info_t *next_image_info;
assert(sec_state_is_valid(type));
next_image_info = (type == NON_SECURE)
? &bl33_image_ep_info : &bl32_image_ep_info;
/*
* None of the images on the ARM development platforms can have 0x0
* as the entrypoint
*/
if (next_image_info->pc)
return next_image_info;
else
return NULL;
}
/*******************************************************************************
* Perform any BL31 early platform setup common to ARM standard platforms.
* Here is an opportunity to copy parameters passed by the calling EL (S-EL1
* in BL2 & S-EL3 in BL1) before they are lost (potentially). This needs to be
* done before the MMU is initialized so that the memory layout can be used
* while creating page tables. BL2 has flushed this information to memory, so
* we are guaranteed to pick up good data.
******************************************************************************/
#if LOAD_IMAGE_V2
void arm_bl31_early_platform_setup(void *from_bl2, uintptr_t soc_fw_config,
uintptr_t hw_config, void *plat_params_from_bl2)
#else
void arm_bl31_early_platform_setup(bl31_params_t *from_bl2, uintptr_t soc_fw_config,
uintptr_t hw_config, void *plat_params_from_bl2)
#endif
{
/* Initialize the console to provide early debug support */
console_init(PLAT_ARM_BOOT_UART_BASE, PLAT_ARM_BOOT_UART_CLK_IN_HZ,
ARM_CONSOLE_BAUDRATE);
#if RESET_TO_BL31
/* There are no parameters from BL2 if BL31 is a reset vector */
assert(from_bl2 == NULL);
assert(plat_params_from_bl2 == NULL);
# ifdef BL32_BASE
/* Populate entry point information for BL32 */
SET_PARAM_HEAD(&bl32_image_ep_info,
PARAM_EP,
VERSION_1,
0);
SET_SECURITY_STATE(bl32_image_ep_info.h.attr, SECURE);
bl32_image_ep_info.pc = BL32_BASE;
bl32_image_ep_info.spsr = arm_get_spsr_for_bl32_entry();
# endif /* BL32_BASE */
/* Populate entry point information for BL33 */
SET_PARAM_HEAD(&bl33_image_ep_info,
PARAM_EP,
VERSION_1,
0);
/*
* Tell BL31 where the non-trusted software image
* is located and the entry state information
*/
bl33_image_ep_info.pc = plat_get_ns_image_entrypoint();
bl33_image_ep_info.spsr = arm_get_spsr_for_bl33_entry();
SET_SECURITY_STATE(bl33_image_ep_info.h.attr, NON_SECURE);
# if ARM_LINUX_KERNEL_AS_BL33
/*
* According to the file ``Documentation/arm64/booting.txt`` of the
* Linux kernel tree, Linux expects the physical address of the device
* tree blob (DTB) in x0, while x1-x3 are reserved for future use and
* must be 0.
*/
bl33_image_ep_info.args.arg0 = (u_register_t)ARM_PRELOADED_DTB_BASE;
bl33_image_ep_info.args.arg1 = 0U;
bl33_image_ep_info.args.arg2 = 0U;
bl33_image_ep_info.args.arg3 = 0U;
# endif
#else /* RESET_TO_BL31 */
/*
* In debug builds, we pass a special value in 'plat_params_from_bl2'
* to verify platform parameters from BL2 to BL31.
* In release builds, it's not used.
*/
assert(((unsigned long long)plat_params_from_bl2) ==
ARM_BL31_PLAT_PARAM_VAL);
# if LOAD_IMAGE_V2
/*
* Check params passed from BL2 should not be NULL,
*/
bl_params_t *params_from_bl2 = (bl_params_t *)from_bl2;
assert(params_from_bl2 != NULL);
assert(params_from_bl2->h.type == PARAM_BL_PARAMS);
assert(params_from_bl2->h.version >= VERSION_2);
bl_params_node_t *bl_params = params_from_bl2->head;
/*
* Copy BL33 and BL32 (if present), entry point information.
* They are stored in Secure RAM, in BL2's address space.
*/
while (bl_params) {
if (bl_params->image_id == BL32_IMAGE_ID)
bl32_image_ep_info = *bl_params->ep_info;
if (bl_params->image_id == BL33_IMAGE_ID)
bl33_image_ep_info = *bl_params->ep_info;
bl_params = bl_params->next_params_info;
}
if (bl33_image_ep_info.pc == 0)
panic();
# else /* LOAD_IMAGE_V2 */
/*
* Check params passed from BL2 should not be NULL,
*/
assert(from_bl2 != NULL);
assert(from_bl2->h.type == PARAM_BL31);
assert(from_bl2->h.version >= VERSION_1);
/* Dynamic Config is not supported for LOAD_IMAGE_V1 */
assert(soc_fw_config == 0);
assert(hw_config == 0);
/*
* Copy BL32 (if populated by BL2) and BL33 entry point information.
* They are stored in Secure RAM, in BL2's address space.
*/
if (from_bl2->bl32_ep_info)
bl32_image_ep_info = *from_bl2->bl32_ep_info;
bl33_image_ep_info = *from_bl2->bl33_ep_info;
# endif /* LOAD_IMAGE_V2 */
#endif /* RESET_TO_BL31 */
}
void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
u_register_t arg2, u_register_t arg3)
{
arm_bl31_early_platform_setup((void *)arg0, arg1, arg2, (void *)arg3);
/*
* Initialize Interconnect for this cluster during cold boot.
* No need for locks as no other CPU is active.
*/
plat_arm_interconnect_init();
/*
* Enable Interconnect coherency for the primary CPU's cluster.
* Earlier bootloader stages might already do this (e.g. Trusted
* Firmware's BL1 does it) but we can't assume so. There is no harm in
* executing this code twice anyway.
* Platform specific PSCI code will enable coherency for other
* clusters.
*/
plat_arm_interconnect_enter_coherency();
}
/*******************************************************************************
* Perform any BL31 platform setup common to ARM standard platforms
******************************************************************************/
void arm_bl31_platform_setup(void)
{
/* Initialize the GIC driver, cpu and distributor interfaces */
plat_arm_gic_driver_init();
plat_arm_gic_init();
#if RESET_TO_BL31
/*
* Do initial security configuration to allow DRAM/device access
* (if earlier BL has not already done so).
*/
plat_arm_security_setup();
#if defined(PLAT_ARM_MEM_PROT_ADDR)
arm_nor_psci_do_dyn_mem_protect();
#endif /* PLAT_ARM_MEM_PROT_ADDR */
#endif /* RESET_TO_BL31 */
/* Enable and initialize the System level generic timer */
mmio_write_32(ARM_SYS_CNTCTL_BASE + CNTCR_OFF,
CNTCR_FCREQ(0) | CNTCR_EN);
/* Allow access to the System counter timer module */
arm_configure_sys_timer();
/* Initialize power controller before setting up topology */
plat_arm_pwrc_setup();
#if RAS_EXTENSION
ras_init();
#endif
}
/*******************************************************************************
* Perform any BL31 platform runtime setup prior to BL31 exit common to ARM
* standard platforms
******************************************************************************/
void arm_bl31_plat_runtime_setup(void)
{
/* Initialize the runtime console */
console_init(PLAT_ARM_BL31_RUN_UART_BASE, PLAT_ARM_BL31_RUN_UART_CLK_IN_HZ,
ARM_CONSOLE_BAUDRATE);
}
void bl31_platform_setup(void)
{
arm_bl31_platform_setup();
}
void bl31_plat_runtime_setup(void)
{
arm_bl31_plat_runtime_setup();
}
/*******************************************************************************
* Perform the very early platform specific architectural setup shared between
* ARM standard platforms. This only does basic initialization. Later
* architectural setup (bl31_arch_setup()) does not do anything platform
* specific.
******************************************************************************/
void arm_bl31_plat_arch_setup(void)
{
arm_setup_page_tables(BL31_BASE,
BL31_END - BL31_BASE,
BL_CODE_BASE,
BL_CODE_END,
BL_RO_DATA_BASE,
BL_RO_DATA_END
#if USE_COHERENT_MEM
, BL_COHERENT_RAM_BASE,
BL_COHERENT_RAM_END
#endif
);
enable_mmu_el3(0);
}
void bl31_plat_arch_setup(void)
{
arm_bl31_plat_arch_setup();
}