| /* |
| * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| #ifndef __ARM_DEF_H__ |
| #define __ARM_DEF_H__ |
| |
| #include <arch.h> |
| #include <common_def.h> |
| #include <gic_common.h> |
| #include <interrupt_props.h> |
| #include <platform_def.h> |
| #include <tbbr_img_def.h> |
| #include <utils_def.h> |
| #include <xlat_tables_defs.h> |
| |
| |
| /****************************************************************************** |
| * Definitions common to all ARM standard platforms |
| *****************************************************************************/ |
| |
| /* Special value used to verify platform parameters from BL2 to BL31 */ |
| #define ARM_BL31_PLAT_PARAM_VAL 0x0f1e2d3c4b5a6978ULL |
| |
| #define ARM_SYSTEM_COUNT 1 |
| |
| #define ARM_CACHE_WRITEBACK_SHIFT 6 |
| |
| /* |
| * Macros mapping the MPIDR Affinity levels to ARM Platform Power levels. The |
| * power levels have a 1:1 mapping with the MPIDR affinity levels. |
| */ |
| #define ARM_PWR_LVL0 MPIDR_AFFLVL0 |
| #define ARM_PWR_LVL1 MPIDR_AFFLVL1 |
| #define ARM_PWR_LVL2 MPIDR_AFFLVL2 |
| |
| /* |
| * Macros for local power states in ARM platforms encoded by State-ID field |
| * within the power-state parameter. |
| */ |
| /* Local power state for power domains in Run state. */ |
| #define ARM_LOCAL_STATE_RUN 0 |
| /* Local power state for retention. Valid only for CPU power domains */ |
| #define ARM_LOCAL_STATE_RET 1 |
| /* Local power state for OFF/power-down. Valid for CPU and cluster power |
| domains */ |
| #define ARM_LOCAL_STATE_OFF 2 |
| |
| /* Memory location options for TSP */ |
| #define ARM_TRUSTED_SRAM_ID 0 |
| #define ARM_TRUSTED_DRAM_ID 1 |
| #define ARM_DRAM_ID 2 |
| |
| /* The first 4KB of Trusted SRAM are used as shared memory */ |
| #define ARM_TRUSTED_SRAM_BASE 0x04000000 |
| #define ARM_SHARED_RAM_BASE ARM_TRUSTED_SRAM_BASE |
| #define ARM_SHARED_RAM_SIZE 0x00001000 /* 4 KB */ |
| |
| /* The remaining Trusted SRAM is used to load the BL images */ |
| #define ARM_BL_RAM_BASE (ARM_SHARED_RAM_BASE + \ |
| ARM_SHARED_RAM_SIZE) |
| #define ARM_BL_RAM_SIZE (PLAT_ARM_TRUSTED_SRAM_SIZE - \ |
| ARM_SHARED_RAM_SIZE) |
| |
| /* |
| * The top 16MB of DRAM1 is configured as secure access only using the TZC |
| * - SCP TZC DRAM: If present, DRAM reserved for SCP use |
| * - AP TZC DRAM: The remaining TZC secured DRAM reserved for AP use |
| */ |
| #define ARM_TZC_DRAM1_SIZE ULL(0x01000000) |
| |
| #define ARM_SCP_TZC_DRAM1_BASE (ARM_DRAM1_BASE + \ |
| ARM_DRAM1_SIZE - \ |
| ARM_SCP_TZC_DRAM1_SIZE) |
| #define ARM_SCP_TZC_DRAM1_SIZE PLAT_ARM_SCP_TZC_DRAM1_SIZE |
| #define ARM_SCP_TZC_DRAM1_END (ARM_SCP_TZC_DRAM1_BASE + \ |
| ARM_SCP_TZC_DRAM1_SIZE - 1) |
| |
| /* |
| * Define a 2MB region within the TZC secured DRAM for use by EL3 runtime |
| * firmware. This region is meant to be NOLOAD and will not be zero |
| * initialized. Data sections with the attribute `arm_el3_tzc_dram` will be |
| * placed here. |
| */ |
| #define ARM_EL3_TZC_DRAM1_BASE (ARM_SCP_TZC_DRAM1_BASE - ARM_EL3_TZC_DRAM1_SIZE) |
| #define ARM_EL3_TZC_DRAM1_SIZE ULL(0x00200000) /* 2 MB */ |
| #define ARM_EL3_TZC_DRAM1_END (ARM_EL3_TZC_DRAM1_BASE + \ |
| ARM_EL3_TZC_DRAM1_SIZE - 1) |
| |
| #define ARM_AP_TZC_DRAM1_BASE (ARM_DRAM1_BASE + \ |
| ARM_DRAM1_SIZE - \ |
| ARM_TZC_DRAM1_SIZE) |
| #define ARM_AP_TZC_DRAM1_SIZE (ARM_TZC_DRAM1_SIZE - \ |
| (ARM_SCP_TZC_DRAM1_SIZE + \ |
| ARM_EL3_TZC_DRAM1_SIZE)) |
| #define ARM_AP_TZC_DRAM1_END (ARM_AP_TZC_DRAM1_BASE + \ |
| ARM_AP_TZC_DRAM1_SIZE - 1) |
| |
| /* Define the Access permissions for Secure peripherals to NS_DRAM */ |
| #if ARM_CRYPTOCELL_INTEG |
| /* |
| * Allow Secure peripheral to read NS DRAM when integrated with CryptoCell. |
| * This is required by CryptoCell to authenticate BL33 which is loaded |
| * into the Non Secure DDR. |
| */ |
| #define ARM_TZC_NS_DRAM_S_ACCESS TZC_REGION_S_RD |
| #else |
| #define ARM_TZC_NS_DRAM_S_ACCESS TZC_REGION_S_NONE |
| #endif |
| |
| #ifdef SPD_opteed |
| /* |
| * BL2 needs to map 4MB at the end of TZC_DRAM1 in order to |
| * load/authenticate the trusted os extra image. The first 512KB of |
| * TZC_DRAM1 are reserved for trusted os (OPTEE). The extra image loading |
| * for OPTEE is paged image which only include the paging part using |
| * virtual memory but without "init" data. OPTEE will copy the "init" data |
| * (from pager image) to the first 512KB of TZC_DRAM, and then copy the |
| * extra image behind the "init" data. |
| */ |
| #define ARM_OPTEE_PAGEABLE_LOAD_BASE (ARM_AP_TZC_DRAM1_BASE + \ |
| ARM_AP_TZC_DRAM1_SIZE - \ |
| ARM_OPTEE_PAGEABLE_LOAD_SIZE) |
| #define ARM_OPTEE_PAGEABLE_LOAD_SIZE 0x400000 |
| #define ARM_OPTEE_PAGEABLE_LOAD_MEM MAP_REGION_FLAT( \ |
| ARM_OPTEE_PAGEABLE_LOAD_BASE, \ |
| ARM_OPTEE_PAGEABLE_LOAD_SIZE, \ |
| MT_MEMORY | MT_RW | MT_SECURE) |
| |
| /* |
| * Map the memory for the OP-TEE core (also known as OP-TEE pager when paging |
| * support is enabled). |
| */ |
| #define ARM_MAP_OPTEE_CORE_MEM MAP_REGION_FLAT( \ |
| BL32_BASE, \ |
| BL32_LIMIT - BL32_BASE, \ |
| MT_MEMORY | MT_RW | MT_SECURE) |
| #endif /* SPD_opteed */ |
| |
| #define ARM_NS_DRAM1_BASE ARM_DRAM1_BASE |
| #define ARM_NS_DRAM1_SIZE (ARM_DRAM1_SIZE - \ |
| ARM_TZC_DRAM1_SIZE) |
| #define ARM_NS_DRAM1_END (ARM_NS_DRAM1_BASE + \ |
| ARM_NS_DRAM1_SIZE - 1) |
| |
| #define ARM_DRAM1_BASE ULL(0x80000000) |
| #define ARM_DRAM1_SIZE ULL(0x80000000) |
| #define ARM_DRAM1_END (ARM_DRAM1_BASE + \ |
| ARM_DRAM1_SIZE - 1) |
| |
| #define ARM_DRAM2_BASE ULL(0x880000000) |
| #define ARM_DRAM2_SIZE PLAT_ARM_DRAM2_SIZE |
| #define ARM_DRAM2_END (ARM_DRAM2_BASE + \ |
| ARM_DRAM2_SIZE - 1) |
| |
| #define ARM_IRQ_SEC_PHY_TIMER 29 |
| |
| #define ARM_IRQ_SEC_SGI_0 8 |
| #define ARM_IRQ_SEC_SGI_1 9 |
| #define ARM_IRQ_SEC_SGI_2 10 |
| #define ARM_IRQ_SEC_SGI_3 11 |
| #define ARM_IRQ_SEC_SGI_4 12 |
| #define ARM_IRQ_SEC_SGI_5 13 |
| #define ARM_IRQ_SEC_SGI_6 14 |
| #define ARM_IRQ_SEC_SGI_7 15 |
| |
| /* |
| * List of secure interrupts are deprecated, but are retained only to support |
| * legacy configurations. |
| */ |
| #define ARM_G1S_IRQS ARM_IRQ_SEC_PHY_TIMER, \ |
| ARM_IRQ_SEC_SGI_1, \ |
| ARM_IRQ_SEC_SGI_2, \ |
| ARM_IRQ_SEC_SGI_3, \ |
| ARM_IRQ_SEC_SGI_4, \ |
| ARM_IRQ_SEC_SGI_5, \ |
| ARM_IRQ_SEC_SGI_7 |
| |
| #define ARM_G0_IRQS ARM_IRQ_SEC_SGI_0, \ |
| ARM_IRQ_SEC_SGI_6 |
| |
| /* |
| * Define a list of Group 1 Secure and Group 0 interrupt properties as per GICv3 |
| * terminology. On a GICv2 system or mode, the lists will be merged and treated |
| * as Group 0 interrupts. |
| */ |
| #define ARM_G1S_IRQ_PROPS(grp) \ |
| INTR_PROP_DESC(ARM_IRQ_SEC_PHY_TIMER, GIC_HIGHEST_SEC_PRIORITY, grp, \ |
| GIC_INTR_CFG_LEVEL), \ |
| INTR_PROP_DESC(ARM_IRQ_SEC_SGI_1, GIC_HIGHEST_SEC_PRIORITY, grp, \ |
| GIC_INTR_CFG_EDGE), \ |
| INTR_PROP_DESC(ARM_IRQ_SEC_SGI_2, GIC_HIGHEST_SEC_PRIORITY, grp, \ |
| GIC_INTR_CFG_EDGE), \ |
| INTR_PROP_DESC(ARM_IRQ_SEC_SGI_3, GIC_HIGHEST_SEC_PRIORITY, grp, \ |
| GIC_INTR_CFG_EDGE), \ |
| INTR_PROP_DESC(ARM_IRQ_SEC_SGI_4, GIC_HIGHEST_SEC_PRIORITY, grp, \ |
| GIC_INTR_CFG_EDGE), \ |
| INTR_PROP_DESC(ARM_IRQ_SEC_SGI_5, GIC_HIGHEST_SEC_PRIORITY, grp, \ |
| GIC_INTR_CFG_EDGE), \ |
| INTR_PROP_DESC(ARM_IRQ_SEC_SGI_7, GIC_HIGHEST_SEC_PRIORITY, grp, \ |
| GIC_INTR_CFG_EDGE) |
| |
| #define ARM_G0_IRQ_PROPS(grp) \ |
| INTR_PROP_DESC(ARM_IRQ_SEC_SGI_0, PLAT_SDEI_NORMAL_PRI, grp, \ |
| GIC_INTR_CFG_EDGE), \ |
| INTR_PROP_DESC(ARM_IRQ_SEC_SGI_6, GIC_HIGHEST_SEC_PRIORITY, grp, \ |
| GIC_INTR_CFG_EDGE) |
| |
| #define ARM_MAP_SHARED_RAM MAP_REGION_FLAT( \ |
| ARM_SHARED_RAM_BASE, \ |
| ARM_SHARED_RAM_SIZE, \ |
| MT_DEVICE | MT_RW | MT_SECURE) |
| |
| #define ARM_MAP_NS_DRAM1 MAP_REGION_FLAT( \ |
| ARM_NS_DRAM1_BASE, \ |
| ARM_NS_DRAM1_SIZE, \ |
| MT_MEMORY | MT_RW | MT_NS) |
| |
| #define ARM_MAP_DRAM2 MAP_REGION_FLAT( \ |
| ARM_DRAM2_BASE, \ |
| ARM_DRAM2_SIZE, \ |
| MT_MEMORY | MT_RW | MT_NS) |
| #ifdef SPD_tspd |
| |
| #define ARM_MAP_TSP_SEC_MEM MAP_REGION_FLAT( \ |
| TSP_SEC_MEM_BASE, \ |
| TSP_SEC_MEM_SIZE, \ |
| MT_MEMORY | MT_RW | MT_SECURE) |
| #endif |
| |
| #if ARM_BL31_IN_DRAM |
| #define ARM_MAP_BL31_SEC_DRAM MAP_REGION_FLAT( \ |
| BL31_BASE, \ |
| PLAT_ARM_MAX_BL31_SIZE, \ |
| MT_MEMORY | MT_RW | MT_SECURE) |
| #endif |
| |
| #define ARM_MAP_EL3_TZC_DRAM MAP_REGION_FLAT( \ |
| ARM_EL3_TZC_DRAM1_BASE, \ |
| ARM_EL3_TZC_DRAM1_SIZE, \ |
| MT_MEMORY | MT_RW | MT_SECURE) |
| |
| /* |
| * The number of regions like RO(code), coherent and data required by |
| * different BL stages which need to be mapped in the MMU. |
| */ |
| #if ENABLE_SPM && defined(IMAGE_BL31) |
| # if USE_COHERENT_MEM |
| # define ARM_BL_REGIONS 5 |
| # else |
| # define ARM_BL_REGIONS 4 |
| # endif |
| #elif USE_COHERENT_MEM |
| # define ARM_BL_REGIONS 4 |
| #else |
| # define ARM_BL_REGIONS 3 |
| #endif |
| |
| #define MAX_MMAP_REGIONS (PLAT_ARM_MMAP_ENTRIES + \ |
| ARM_BL_REGIONS) |
| |
| /* Memory mapped Generic timer interfaces */ |
| #define ARM_SYS_CNTCTL_BASE 0x2a430000 |
| #define ARM_SYS_CNTREAD_BASE 0x2a800000 |
| #define ARM_SYS_TIMCTL_BASE 0x2a810000 |
| |
| #define ARM_CONSOLE_BAUDRATE 115200 |
| |
| /* Trusted Watchdog constants */ |
| #define ARM_SP805_TWDG_BASE 0x2a490000 |
| #define ARM_SP805_TWDG_CLK_HZ 32768 |
| /* The TBBR document specifies a watchdog timeout of 256 seconds. SP805 |
| * asserts reset after two consecutive countdowns (2 x 128 = 256 sec) */ |
| #define ARM_TWDG_TIMEOUT_SEC 128 |
| #define ARM_TWDG_LOAD_VAL (ARM_SP805_TWDG_CLK_HZ * \ |
| ARM_TWDG_TIMEOUT_SEC) |
| |
| /****************************************************************************** |
| * Required platform porting definitions common to all ARM standard platforms |
| *****************************************************************************/ |
| |
| /* |
| * We need to access DRAM2 from BL2 for PSCI_MEM_PROTECT for |
| * AArch64 builds |
| */ |
| #ifdef AARCH64 |
| #define PLAT_PHY_ADDR_SPACE_SIZE (1ULL << 36) |
| #define PLAT_VIRT_ADDR_SPACE_SIZE (1ULL << 36) |
| #else |
| #define PLAT_PHY_ADDR_SPACE_SIZE (1ULL << 32) |
| #define PLAT_VIRT_ADDR_SPACE_SIZE (1ULL << 32) |
| #endif |
| |
| |
| /* |
| * This macro defines the deepest retention state possible. A higher state |
| * id will represent an invalid or a power down state. |
| */ |
| #define PLAT_MAX_RET_STATE ARM_LOCAL_STATE_RET |
| |
| /* |
| * This macro defines the deepest power down states possible. Any state ID |
| * higher than this is invalid. |
| */ |
| #define PLAT_MAX_OFF_STATE ARM_LOCAL_STATE_OFF |
| |
| /* |
| * Some data must be aligned on the biggest cache line size in the platform. |
| * This is known only to the platform as it might have a combination of |
| * integrated and external caches. |
| */ |
| #define CACHE_WRITEBACK_GRANULE (1 << ARM_CACHE_WRITEBACK_SHIFT) |
| |
| /* |
| * To enable TB_FW_CONFIG to be loaded by BL1, define the corresponding base |
| * and limit. Leave enough space of BL2 meminfo. |
| */ |
| #define ARM_TB_FW_CONFIG_BASE ARM_BL_RAM_BASE + sizeof(meminfo_t) |
| #define ARM_TB_FW_CONFIG_LIMIT ARM_BL_RAM_BASE + PAGE_SIZE |
| |
| /******************************************************************************* |
| * BL1 specific defines. |
| * BL1 RW data is relocated from ROM to RAM at runtime so we need 2 sets of |
| * addresses. |
| ******************************************************************************/ |
| #define BL1_RO_BASE PLAT_ARM_TRUSTED_ROM_BASE |
| #define BL1_RO_LIMIT (PLAT_ARM_TRUSTED_ROM_BASE \ |
| + PLAT_ARM_TRUSTED_ROM_SIZE) |
| /* |
| * Put BL1 RW at the top of the Trusted SRAM. |
| */ |
| #define BL1_RW_BASE (ARM_BL_RAM_BASE + \ |
| ARM_BL_RAM_SIZE - \ |
| PLAT_ARM_MAX_BL1_RW_SIZE) |
| #define BL1_RW_LIMIT (ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE) |
| |
| /******************************************************************************* |
| * BL2 specific defines. |
| ******************************************************************************/ |
| #if BL2_AT_EL3 |
| /* Put BL2 in the middle of the Trusted SRAM */ |
| #define BL2_BASE (ARM_TRUSTED_SRAM_BASE + \ |
| (PLAT_ARM_TRUSTED_SRAM_SIZE >> 1)) |
| #define BL2_LIMIT (ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE) |
| |
| #else |
| /* |
| * Put BL2 just below BL1. |
| */ |
| #define BL2_BASE (BL1_RW_BASE - PLAT_ARM_MAX_BL2_SIZE) |
| #define BL2_LIMIT BL1_RW_BASE |
| #endif |
| |
| /******************************************************************************* |
| * BL31 specific defines. |
| ******************************************************************************/ |
| #if ARM_BL31_IN_DRAM |
| /* |
| * Put BL31 at the bottom of TZC secured DRAM |
| */ |
| #define BL31_BASE ARM_AP_TZC_DRAM1_BASE |
| #define BL31_LIMIT (ARM_AP_TZC_DRAM1_BASE + \ |
| PLAT_ARM_MAX_BL31_SIZE) |
| #elif (RESET_TO_BL31) |
| /* |
| * Put BL31_BASE in the middle of the Trusted SRAM. |
| */ |
| #define BL31_BASE (ARM_TRUSTED_SRAM_BASE + \ |
| (PLAT_ARM_TRUSTED_SRAM_SIZE >> 1)) |
| #define BL31_LIMIT (ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE) |
| #else |
| /* Put BL31 below BL2 in the Trusted SRAM.*/ |
| #define BL31_BASE ((ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE)\ |
| - PLAT_ARM_MAX_BL31_SIZE) |
| #define BL31_PROGBITS_LIMIT BL2_BASE |
| #define BL31_LIMIT (ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE) |
| #endif |
| |
| #if defined(AARCH32) || JUNO_AARCH32_EL3_RUNTIME |
| /******************************************************************************* |
| * BL32 specific defines for EL3 runtime in AArch32 mode |
| ******************************************************************************/ |
| # if RESET_TO_SP_MIN && !JUNO_AARCH32_EL3_RUNTIME |
| /* |
| * SP_MIN is the only BL image in SRAM. Allocate the whole of SRAM (excluding |
| * the page reserved for fw_configs) to BL32 |
| */ |
| # define BL32_BASE ARM_TB_FW_CONFIG_LIMIT |
| # define BL32_LIMIT (ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE) |
| # else |
| /* Put BL32 below BL2 in the Trusted SRAM.*/ |
| # define BL32_BASE ((ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE)\ |
| - PLAT_ARM_MAX_BL32_SIZE) |
| # define BL32_PROGBITS_LIMIT BL2_BASE |
| # define BL32_LIMIT (ARM_BL_RAM_BASE + ARM_BL_RAM_SIZE) |
| # endif /* RESET_TO_SP_MIN && !JUNO_AARCH32_EL3_RUNTIME */ |
| |
| #else |
| /******************************************************************************* |
| * BL32 specific defines for EL3 runtime in AArch64 mode |
| ******************************************************************************/ |
| /* |
| * On ARM standard platforms, the TSP can execute from Trusted SRAM, |
| * Trusted DRAM (if available) or the DRAM region secured by the TrustZone |
| * controller. |
| */ |
| # if ENABLE_SPM |
| # define TSP_SEC_MEM_BASE (ARM_AP_TZC_DRAM1_BASE + ULL(0x200000)) |
| # define TSP_SEC_MEM_SIZE (ARM_AP_TZC_DRAM1_SIZE - ULL(0x200000)) |
| # define BL32_BASE (ARM_AP_TZC_DRAM1_BASE + ULL(0x200000)) |
| # define BL32_LIMIT (ARM_AP_TZC_DRAM1_BASE + \ |
| ARM_AP_TZC_DRAM1_SIZE) |
| # elif ARM_BL31_IN_DRAM |
| # define TSP_SEC_MEM_BASE (ARM_AP_TZC_DRAM1_BASE + \ |
| PLAT_ARM_MAX_BL31_SIZE) |
| # define TSP_SEC_MEM_SIZE (ARM_AP_TZC_DRAM1_SIZE - \ |
| PLAT_ARM_MAX_BL31_SIZE) |
| # define BL32_BASE (ARM_AP_TZC_DRAM1_BASE + \ |
| PLAT_ARM_MAX_BL31_SIZE) |
| # define BL32_LIMIT (ARM_AP_TZC_DRAM1_BASE + \ |
| ARM_AP_TZC_DRAM1_SIZE) |
| # elif ARM_TSP_RAM_LOCATION_ID == ARM_TRUSTED_SRAM_ID |
| # define TSP_SEC_MEM_BASE ARM_BL_RAM_BASE |
| # define TSP_SEC_MEM_SIZE ARM_BL_RAM_SIZE |
| # define TSP_PROGBITS_LIMIT BL31_BASE |
| # define BL32_BASE ARM_TB_FW_CONFIG_LIMIT |
| # define BL32_LIMIT BL31_BASE |
| # elif ARM_TSP_RAM_LOCATION_ID == ARM_TRUSTED_DRAM_ID |
| # define TSP_SEC_MEM_BASE PLAT_ARM_TRUSTED_DRAM_BASE |
| # define TSP_SEC_MEM_SIZE PLAT_ARM_TRUSTED_DRAM_SIZE |
| # define BL32_BASE PLAT_ARM_TRUSTED_DRAM_BASE |
| # define BL32_LIMIT (PLAT_ARM_TRUSTED_DRAM_BASE \ |
| + (1 << 21)) |
| # elif ARM_TSP_RAM_LOCATION_ID == ARM_DRAM_ID |
| # define TSP_SEC_MEM_BASE ARM_AP_TZC_DRAM1_BASE |
| # define TSP_SEC_MEM_SIZE ARM_AP_TZC_DRAM1_SIZE |
| # define BL32_BASE ARM_AP_TZC_DRAM1_BASE |
| # define BL32_LIMIT (ARM_AP_TZC_DRAM1_BASE + \ |
| ARM_AP_TZC_DRAM1_SIZE) |
| # else |
| # error "Unsupported ARM_TSP_RAM_LOCATION_ID value" |
| # endif |
| #endif /* AARCH32 || JUNO_AARCH32_EL3_RUNTIME */ |
| |
| /* |
| * BL32 is mandatory in AArch32. In AArch64, undefine BL32_BASE if there is no |
| * SPD and no SPM, as they are the only ones that can be used as BL32. |
| */ |
| #if !(defined(AARCH32) || JUNO_AARCH32_EL3_RUNTIME) |
| # if defined(SPD_none) && !ENABLE_SPM |
| # undef BL32_BASE |
| # endif /* defined(SPD_none) && !ENABLE_SPM */ |
| #endif /* !(defined(AARCH32) || JUNO_AARCH32_EL3_RUNTIME) */ |
| |
| /******************************************************************************* |
| * FWU Images: NS_BL1U, BL2U & NS_BL2U defines. |
| ******************************************************************************/ |
| #define BL2U_BASE BL2_BASE |
| #define BL2U_LIMIT BL2_LIMIT |
| |
| #define NS_BL2U_BASE ARM_NS_DRAM1_BASE |
| #define NS_BL1U_BASE (PLAT_ARM_NVM_BASE + 0x03EB8000) |
| |
| /* |
| * ID of the secure physical generic timer interrupt used by the TSP. |
| */ |
| #define TSP_IRQ_SEC_PHY_TIMER ARM_IRQ_SEC_PHY_TIMER |
| |
| |
| /* |
| * One cache line needed for bakery locks on ARM platforms |
| */ |
| #define PLAT_PERCPU_BAKERY_LOCK_SIZE (1 * CACHE_WRITEBACK_GRANULE) |
| |
| /* Priority levels for ARM platforms */ |
| #define PLAT_RAS_PRI 0x10 |
| #define PLAT_SDEI_CRITICAL_PRI 0x60 |
| #define PLAT_SDEI_NORMAL_PRI 0x70 |
| |
| /* ARM platforms use 3 upper bits of secure interrupt priority */ |
| #define ARM_PRI_BITS 3 |
| |
| /* SGI used for SDEI signalling */ |
| #define ARM_SDEI_SGI ARM_IRQ_SEC_SGI_0 |
| |
| /* ARM SDEI dynamic private event numbers */ |
| #define ARM_SDEI_DP_EVENT_0 1000 |
| #define ARM_SDEI_DP_EVENT_1 1001 |
| #define ARM_SDEI_DP_EVENT_2 1002 |
| |
| /* ARM SDEI dynamic shared event numbers */ |
| #define ARM_SDEI_DS_EVENT_0 2000 |
| #define ARM_SDEI_DS_EVENT_1 2001 |
| #define ARM_SDEI_DS_EVENT_2 2002 |
| |
| #define ARM_SDEI_PRIVATE_EVENTS \ |
| SDEI_DEFINE_EVENT_0(ARM_SDEI_SGI), \ |
| SDEI_PRIVATE_EVENT(ARM_SDEI_DP_EVENT_0, SDEI_DYN_IRQ, SDEI_MAPF_DYNAMIC), \ |
| SDEI_PRIVATE_EVENT(ARM_SDEI_DP_EVENT_1, SDEI_DYN_IRQ, SDEI_MAPF_DYNAMIC), \ |
| SDEI_PRIVATE_EVENT(ARM_SDEI_DP_EVENT_2, SDEI_DYN_IRQ, SDEI_MAPF_DYNAMIC) |
| |
| #define ARM_SDEI_SHARED_EVENTS \ |
| SDEI_SHARED_EVENT(ARM_SDEI_DS_EVENT_0, SDEI_DYN_IRQ, SDEI_MAPF_DYNAMIC), \ |
| SDEI_SHARED_EVENT(ARM_SDEI_DS_EVENT_1, SDEI_DYN_IRQ, SDEI_MAPF_DYNAMIC), \ |
| SDEI_SHARED_EVENT(ARM_SDEI_DS_EVENT_2, SDEI_DYN_IRQ, SDEI_MAPF_DYNAMIC) |
| |
| #endif /* __ARM_DEF_H__ */ |