/* | |
* Copyright (c) 2013-2018, ARM Limited and Contributors. All rights reserved. | |
* | |
* SPDX-License-Identifier: BSD-3-Clause | |
*/ | |
motherboard { | |
arm,v2m-memory-map = "rs1"; | |
compatible = "arm,vexpress,v2m-p1", "simple-bus"; | |
#address-cells = <2>; /* SMB chipselect number and offset */ | |
#size-cells = <1>; | |
ranges; | |
flash@0,00000000 { | |
compatible = "arm,vexpress-flash", "cfi-flash"; | |
reg = <0 0x00000000 0x04000000>, | |
<4 0x00000000 0x04000000>; | |
bank-width = <4>; | |
}; | |
vram@2,00000000 { | |
compatible = "arm,vexpress-vram"; | |
reg = <2 0x00000000 0x00800000>; | |
}; | |
ethernet@2,02000000 { | |
compatible = "smsc,lan91c111"; | |
reg = <2 0x02000000 0x10000>; | |
interrupts = <15>; | |
}; | |
v2m_clk24mhz: clk24mhz { | |
compatible = "fixed-clock"; | |
#clock-cells = <0>; | |
clock-frequency = <24000000>; | |
clock-output-names = "v2m:clk24mhz"; | |
}; | |
v2m_refclk1mhz: refclk1mhz { | |
compatible = "fixed-clock"; | |
#clock-cells = <0>; | |
clock-frequency = <1000000>; | |
clock-output-names = "v2m:refclk1mhz"; | |
}; | |
v2m_refclk32khz: refclk32khz { | |
compatible = "fixed-clock"; | |
#clock-cells = <0>; | |
clock-frequency = <32768>; | |
clock-output-names = "v2m:refclk32khz"; | |
}; | |
iofpga@3,00000000 { | |
compatible = "arm,amba-bus", "simple-bus"; | |
#address-cells = <1>; | |
#size-cells = <1>; | |
ranges = <0 3 0 0x200000>; | |
v2m_sysreg: sysreg@10000 { | |
compatible = "arm,vexpress-sysreg"; | |
reg = <0x010000 0x1000>; | |
gpio-controller; | |
#gpio-cells = <2>; | |
}; | |
v2m_sysctl: sysctl@20000 { | |
compatible = "arm,sp810", "arm,primecell"; | |
reg = <0x020000 0x1000>; | |
clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>; | |
clock-names = "refclk", "timclk", "apb_pclk"; | |
#clock-cells = <1>; | |
clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; | |
}; | |
aaci@40000 { | |
compatible = "arm,pl041", "arm,primecell"; | |
reg = <0x040000 0x1000>; | |
interrupts = <11>; | |
clocks = <&v2m_clk24mhz>; | |
clock-names = "apb_pclk"; | |
}; | |
mmci@50000 { | |
compatible = "arm,pl180", "arm,primecell"; | |
reg = <0x050000 0x1000>; | |
interrupts = <9>, <10>; | |
cd-gpios = <&v2m_sysreg 0 0>; | |
wp-gpios = <&v2m_sysreg 1 0>; | |
max-frequency = <12000000>; | |
vmmc-supply = <&v2m_fixed_3v3>; | |
clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; | |
clock-names = "mclk", "apb_pclk"; | |
}; | |
kmi@60000 { | |
compatible = "arm,pl050", "arm,primecell"; | |
reg = <0x060000 0x1000>; | |
interrupts = <12>; | |
clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; | |
clock-names = "KMIREFCLK", "apb_pclk"; | |
}; | |
kmi@70000 { | |
compatible = "arm,pl050", "arm,primecell"; | |
reg = <0x070000 0x1000>; | |
interrupts = <13>; | |
clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; | |
clock-names = "KMIREFCLK", "apb_pclk"; | |
}; | |
v2m_serial0: uart@90000 { | |
compatible = "arm,pl011", "arm,primecell"; | |
reg = <0x090000 0x1000>; | |
interrupts = <5>; | |
clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; | |
clock-names = "uartclk", "apb_pclk"; | |
}; | |
v2m_serial1: uart@a0000 { | |
compatible = "arm,pl011", "arm,primecell"; | |
reg = <0x0a0000 0x1000>; | |
interrupts = <6>; | |
clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; | |
clock-names = "uartclk", "apb_pclk"; | |
}; | |
v2m_serial2: uart@b0000 { | |
compatible = "arm,pl011", "arm,primecell"; | |
reg = <0x0b0000 0x1000>; | |
interrupts = <7>; | |
clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; | |
clock-names = "uartclk", "apb_pclk"; | |
}; | |
v2m_serial3: uart@c0000 { | |
compatible = "arm,pl011", "arm,primecell"; | |
reg = <0x0c0000 0x1000>; | |
interrupts = <8>; | |
clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>; | |
clock-names = "uartclk", "apb_pclk"; | |
}; | |
wdt@f0000 { | |
compatible = "arm,sp805", "arm,primecell"; | |
reg = <0x0f0000 0x1000>; | |
interrupts = <0>; | |
clocks = <&v2m_refclk32khz>, <&v2m_clk24mhz>; | |
clock-names = "wdogclk", "apb_pclk"; | |
}; | |
v2m_timer01: timer@110000 { | |
compatible = "arm,sp804", "arm,primecell"; | |
reg = <0x110000 0x1000>; | |
interrupts = <2>; | |
clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_clk24mhz>; | |
clock-names = "timclken1", "timclken2", "apb_pclk"; | |
}; | |
v2m_timer23: timer@120000 { | |
compatible = "arm,sp804", "arm,primecell"; | |
reg = <0x120000 0x1000>; | |
interrupts = <3>; | |
clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&v2m_clk24mhz>; | |
clock-names = "timclken1", "timclken2", "apb_pclk"; | |
}; | |
rtc@170000 { | |
compatible = "arm,pl031", "arm,primecell"; | |
reg = <0x170000 0x1000>; | |
interrupts = <4>; | |
clocks = <&v2m_clk24mhz>; | |
clock-names = "apb_pclk"; | |
}; | |
clcd@1f0000 { | |
compatible = "arm,pl111", "arm,primecell"; | |
reg = <0x1f0000 0x1000>; | |
interrupts = <14>; | |
clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>; | |
clock-names = "clcdclk", "apb_pclk"; | |
mode = "XVGA"; | |
use_dma = <0>; | |
framebuffer = <0x18000000 0x00180000>; | |
}; | |
virtio_block@130000 { | |
compatible = "virtio,mmio"; | |
reg = <0x130000 0x1000>; | |
interrupts = <0x2a>; | |
}; | |
}; | |
v2m_fixed_3v3: fixedregulator { | |
compatible = "regulator-fixed"; | |
regulator-name = "3V3"; | |
regulator-min-microvolt = <3300000>; | |
regulator-max-microvolt = <3300000>; | |
regulator-always-on; | |
}; | |
mcc { | |
compatible = "arm,vexpress,config-bus", "simple-bus"; | |
arm,vexpress,config-bridge = <&v2m_sysreg>; | |
v2m_oscclk1: osc { | |
/* CLCD clock */ | |
compatible = "arm,vexpress-osc"; | |
arm,vexpress-sysreg,func = <1 1>; | |
freq-range = <23750000 63500000>; | |
#clock-cells = <0>; | |
clock-output-names = "v2m:oscclk1"; | |
}; | |
/* | |
* Not supported in FVP models | |
* | |
* reset@0 { | |
* compatible = "arm,vexpress-reset"; | |
* arm,vexpress-sysreg,func = <5 0>; | |
* }; | |
*/ | |
muxfpga { | |
compatible = "arm,vexpress-muxfpga"; | |
arm,vexpress-sysreg,func = <7 0>; | |
}; | |
/* | |
* Not used - Superseded by PSCI sys_poweroff | |
* | |
* shutdown@0 { | |
* compatible = "arm,vexpress-shutdown"; | |
* arm,vexpress-sysreg,func = <8 0>; | |
* }; | |
*/ | |
/* | |
* Not used - Superseded by PSCI sys_reset | |
* | |
* reboot@0 { | |
* compatible = "arm,vexpress-reboot"; | |
* arm,vexpress-sysreg,func = <9 0>; | |
* }; | |
*/ | |
dvimode { | |
compatible = "arm,vexpress-dvimode"; | |
arm,vexpress-sysreg,func = <11 0>; | |
}; | |
}; | |
}; |