blob: e2c4513882703eacd0f2156589d0349fc56b5653 [file] [log] [blame]
/*
* Copyright (c) 2015-2016, ARM Limited and Contributors. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* Neither the name of ARM nor the names of its contributors may be used
* to endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef __COMMON_DEF_H__
#define __COMMON_DEF_H__
#include <bl_common.h>
#include <platform_def.h>
/******************************************************************************
* Required platform porting definitions that are expected to be common to
* all platforms
*****************************************************************************/
/*
* Platform binary types for linking
*/
#ifdef AARCH32
#define PLATFORM_LINKER_FORMAT "elf32-littlearm"
#define PLATFORM_LINKER_ARCH arm
#else
#define PLATFORM_LINKER_FORMAT "elf64-littleaarch64"
#define PLATFORM_LINKER_ARCH aarch64
#endif /* AARCH32 */
/*
* Generic platform constants
*/
#define FIRMWARE_WELCOME_STR "Booting Trusted Firmware\n"
/*
* Some of the platform porting definitions use the 'ull' suffix in order to
* avoid subtle integer overflow errors due to implicit integer type promotion
* when working with 32-bit values.
*
* The TSP linker script includes some of these definitions to define the BL32
* memory map, but the GNU LD does not support the 'ull' suffix, causing the
* build process to fail. To solve this problem, the auxiliary macro MAKE_ULL(x)
* will add the 'ull' suffix only when the macro __LINKER__ is not defined
* (__LINKER__ is defined in the command line to preprocess the linker script).
* Constants in the linker script will not have the 'ull' suffix, but this is
* not a problem since the linker evaluates all constant expressions to 64 bit
* (assuming the target architecture is 64 bit).
*/
#ifndef __LINKER__
#define MAKE_ULL(x) x##ull
#else
#define MAKE_ULL(x) x
#endif
#if LOAD_IMAGE_V2
#define BL2_IMAGE_DESC { \
.image_id = BL2_IMAGE_ID, \
SET_STATIC_PARAM_HEAD(image_info, PARAM_EP, \
VERSION_2, image_info_t, 0), \
.image_info.image_base = BL2_BASE, \
.image_info.image_max_size = BL2_LIMIT - BL2_BASE,\
SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP, \
VERSION_2, entry_point_info_t, SECURE | EXECUTABLE),\
.ep_info.pc = BL2_BASE, \
}
#else /* LOAD_IMAGE_V2 */
#define BL2_IMAGE_DESC { \
.image_id = BL2_IMAGE_ID, \
SET_STATIC_PARAM_HEAD(image_info, PARAM_EP, \
VERSION_1, image_info_t, 0), \
.image_info.image_base = BL2_BASE, \
SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP, \
VERSION_1, entry_point_info_t, SECURE | EXECUTABLE),\
.ep_info.pc = BL2_BASE, \
}
#endif /* LOAD_IMAGE_V2 */
/*
* The following constants identify the extents of the code & read-only data
* regions. These addresses are used by the MMU setup code and therefore they
* must be page-aligned.
*
* When the code and read-only data are mapped as a single atomic section
* (i.e. when SEPARATE_CODE_AND_RODATA=0) then we treat the whole section as
* code by specifying the read-only data section as empty.
*
* BL1 is different than the other images in the sense that its read-write data
* originally lives in Trusted ROM and needs to be relocated in Trusted SRAM at
* run-time. Therefore, the read-write data in ROM can be mapped with the same
* memory attributes as the read-only data region. For this reason, BL1 uses
* different macros.
*
* Note that BL1_ROM_END is not necessarily aligned on a page boundary as it
* just points to the end of BL1's actual content in Trusted ROM. Therefore it
* needs to be rounded up to the next page size in order to map the whole last
* page of it with the right memory attributes.
*/
#if SEPARATE_CODE_AND_RODATA
#define BL_CODE_BASE (unsigned long)(&__TEXT_START__)
#define BL_CODE_LIMIT (unsigned long)(&__TEXT_END__)
#define BL_RO_DATA_BASE (unsigned long)(&__RODATA_START__)
#define BL_RO_DATA_LIMIT (unsigned long)(&__RODATA_END__)
#define BL1_CODE_LIMIT BL_CODE_LIMIT
#define BL1_RO_DATA_BASE (unsigned long)(&__RODATA_START__)
#define BL1_RO_DATA_LIMIT round_up(BL1_ROM_END, PAGE_SIZE)
#else
#define BL_CODE_BASE (unsigned long)(&__RO_START__)
#define BL_CODE_LIMIT (unsigned long)(&__RO_END__)
#define BL_RO_DATA_BASE 0
#define BL_RO_DATA_LIMIT 0
#define BL1_CODE_LIMIT round_up(BL1_ROM_END, PAGE_SIZE)
#define BL1_RO_DATA_BASE 0
#define BL1_RO_DATA_LIMIT 0
#endif /* SEPARATE_CODE_AND_RODATA */
#endif /* __COMMON_DEF_H__ */