include/drivers/arm/gicv3.h - filogic/atf - Gitiles

 /*
  * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
  *
  * SPDX-License-Identifier: BSD-3-Clause
  */

 #ifndef __GICV3_H__
 #define __GICV3_H__

 /*******************************************************************************
  * GICv3 miscellaneous definitions
  ******************************************************************************/
 /* Interrupt group definitions */
 #define INTR_GROUP1S		0
 #define INTR_GROUP0		1
 #define INTR_GROUP1NS		2

 /* Interrupt IDs reported by the HPPIR and IAR registers */
 #define PENDING_G1S_INTID	1020
 #define PENDING_G1NS_INTID	1021

 /* Constant to categorize LPI interrupt */
 #define MIN_LPI_ID		8192

 /* GICv3 can only target up to 16 PEs with SGI */
 #define GICV3_MAX_SGI_TARGETS	16

 /*******************************************************************************
  * GICv3 specific Distributor interface register offsets and constants.
  ******************************************************************************/
 #define GICD_STATUSR		0x10
 #define GICD_SETSPI_NSR		0x40
 #define GICD_CLRSPI_NSR		0x48
 #define GICD_SETSPI_SR		0x50
 #define GICD_CLRSPI_SR		0x50
 #define GICD_IGRPMODR		0xd00
 /*
  * GICD_IROUTER<n> register is at 0x6000 + 8n, where n is the interrupt id and
  * n >= 32, making the effective offset as 0x6100.
  */
 #define GICD_IROUTER		0x6000
 #define GICD_PIDR2_GICV3	0xffe8

 #define IGRPMODR_SHIFT		5

 /* GICD_CTLR bit definitions */
 #define CTLR_ENABLE_G1NS_SHIFT		1
 #define CTLR_ENABLE_G1S_SHIFT		2
 #define CTLR_ARE_S_SHIFT		4
 #define CTLR_ARE_NS_SHIFT		5
 #define CTLR_DS_SHIFT			6
 #define CTLR_E1NWF_SHIFT		7
 #define GICD_CTLR_RWP_SHIFT		31

 #define CTLR_ENABLE_G1NS_MASK		0x1
 #define CTLR_ENABLE_G1S_MASK		0x1
 #define CTLR_ARE_S_MASK			0x1
 #define CTLR_ARE_NS_MASK		0x1
 #define CTLR_DS_MASK			0x1
 #define CTLR_E1NWF_MASK			0x1
 #define GICD_CTLR_RWP_MASK		0x1

 #define CTLR_ENABLE_G1NS_BIT		(1 << CTLR_ENABLE_G1NS_SHIFT)
 #define CTLR_ENABLE_G1S_BIT		(1 << CTLR_ENABLE_G1S_SHIFT)
 #define CTLR_ARE_S_BIT			(1 << CTLR_ARE_S_SHIFT)
 #define CTLR_ARE_NS_BIT			(1 << CTLR_ARE_NS_SHIFT)
 #define CTLR_DS_BIT			(1 << CTLR_DS_SHIFT)
 #define CTLR_E1NWF_BIT			(1 << CTLR_E1NWF_SHIFT)
 #define GICD_CTLR_RWP_BIT		(1 << GICD_CTLR_RWP_SHIFT)

 /* GICD_IROUTER shifts and masks */
 #define IROUTER_SHIFT		0
 #define IROUTER_IRM_SHIFT	31
 #define IROUTER_IRM_MASK	0x1

 #define GICV3_IRM_PE		0
 #define GICV3_IRM_ANY		1

 #define NUM_OF_DIST_REGS	30

 /*******************************************************************************
  * GICv3 Re-distributor interface registers & constants
  ******************************************************************************/
 #define GICR_PCPUBASE_SHIFT	0x11
 #define GICR_SGIBASE_OFFSET	(1 << 0x10)	/* 64 KB */
 #define GICR_CTLR		0x0
 #define GICR_TYPER		0x08
 #define GICR_WAKER		0x14
 #define GICR_PROPBASER		0x70
 #define GICR_PENDBASER		0x78
 #define GICR_IGROUPR0		(GICR_SGIBASE_OFFSET + 0x80)
 #define GICR_ISENABLER0		(GICR_SGIBASE_OFFSET + 0x100)
 #define GICR_ICENABLER0		(GICR_SGIBASE_OFFSET + 0x180)
 #define GICR_ISPENDR0		(GICR_SGIBASE_OFFSET + 0x200)
 #define GICR_ICPENDR0		(GICR_SGIBASE_OFFSET + 0x280)
 #define GICR_ISACTIVER0		(GICR_SGIBASE_OFFSET + 0x300)
 #define GICR_ICACTIVER0		(GICR_SGIBASE_OFFSET + 0x380)
 #define GICR_IPRIORITYR		(GICR_SGIBASE_OFFSET + 0x400)
 #define GICR_ICFGR0		(GICR_SGIBASE_OFFSET + 0xc00)
 #define GICR_ICFGR1		(GICR_SGIBASE_OFFSET + 0xc04)
 #define GICR_IGRPMODR0		(GICR_SGIBASE_OFFSET + 0xd00)
 #define GICR_NSACR		(GICR_SGIBASE_OFFSET + 0xe00)

 /* GICR_CTLR bit definitions */
 #define GICR_CTLR_UWP_SHIFT	31
 #define GICR_CTLR_UWP_MASK	0x1
 #define GICR_CTLR_UWP_BIT	(1U << GICR_CTLR_UWP_SHIFT)
 #define GICR_CTLR_RWP_SHIFT	3
 #define GICR_CTLR_RWP_MASK	0x1
 #define GICR_CTLR_RWP_BIT	(1U << GICR_CTLR_RWP_SHIFT)
 #define GICR_CTLR_EN_LPIS_BIT	(1U << 0)

 /* GICR_WAKER bit definitions */
 #define WAKER_CA_SHIFT		2
 #define WAKER_PS_SHIFT		1

 #define WAKER_CA_MASK		0x1
 #define WAKER_PS_MASK		0x1

 #define WAKER_CA_BIT		(1 << WAKER_CA_SHIFT)
 #define WAKER_PS_BIT		(1 << WAKER_PS_SHIFT)

 /* GICR_TYPER bit definitions */
 #define TYPER_AFF_VAL_SHIFT	32
 #define TYPER_PROC_NUM_SHIFT	8
 #define TYPER_LAST_SHIFT	4

 #define TYPER_AFF_VAL_MASK	0xffffffff
 #define TYPER_PROC_NUM_MASK	0xffff
 #define TYPER_LAST_MASK		0x1

 #define TYPER_LAST_BIT		(1 << TYPER_LAST_SHIFT)

 #define NUM_OF_REDIST_REGS	30

 /*******************************************************************************
  * GICv3 CPU interface registers & constants
  ******************************************************************************/
 /* ICC_SRE bit definitions*/
 #define ICC_SRE_EN_BIT		(1 << 3)
 #define ICC_SRE_DIB_BIT		(1 << 2)
 #define ICC_SRE_DFB_BIT		(1 << 1)
 #define ICC_SRE_SRE_BIT		(1 << 0)

 /* ICC_IGRPEN1_EL3 bit definitions */
 #define IGRPEN1_EL3_ENABLE_G1NS_SHIFT	0
 #define IGRPEN1_EL3_ENABLE_G1S_SHIFT	1

 #define IGRPEN1_EL3_ENABLE_G1NS_BIT	(1 << IGRPEN1_EL3_ENABLE_G1NS_SHIFT)
 #define IGRPEN1_EL3_ENABLE_G1S_BIT	(1 << IGRPEN1_EL3_ENABLE_G1S_SHIFT)

 /* ICC_IGRPEN0_EL1 bit definitions */
 #define IGRPEN1_EL1_ENABLE_G0_SHIFT	0
 #define IGRPEN1_EL1_ENABLE_G0_BIT	(1 << IGRPEN1_EL1_ENABLE_G0_SHIFT)

 /* ICC_HPPIR0_EL1 bit definitions */
 #define HPPIR0_EL1_INTID_SHIFT		0
 #define HPPIR0_EL1_INTID_MASK		0xffffff

 /* ICC_HPPIR1_EL1 bit definitions */
 #define HPPIR1_EL1_INTID_SHIFT		0
 #define HPPIR1_EL1_INTID_MASK		0xffffff

 /* ICC_IAR0_EL1 bit definitions */
 #define IAR0_EL1_INTID_SHIFT		0
 #define IAR0_EL1_INTID_MASK		0xffffff

 /* ICC_IAR1_EL1 bit definitions */
 #define IAR1_EL1_INTID_SHIFT		0
 #define IAR1_EL1_INTID_MASK		0xffffff

 /* ICC SGI macros */
 #define SGIR_TGT_MASK			0xffff
 #define SGIR_AFF1_SHIFT			16
 #define SGIR_INTID_SHIFT		24
 #define SGIR_INTID_MASK			0xf
 #define SGIR_AFF2_SHIFT			32
 #define SGIR_IRM_SHIFT			40
 #define SGIR_IRM_MASK			0x1
 #define SGIR_AFF3_SHIFT			48
 #define SGIR_AFF_MASK			0xf

 #define SGIR_IRM_TO_AFF			0

 #define GICV3_SGIR_VALUE(aff3, aff2, aff1, intid, irm, tgt) \
 	((((uint64_t) (aff3) & SGIR_AFF_MASK) << SGIR_AFF3_SHIFT) | \
 	 (((uint64_t) (irm) & SGIR_IRM_MASK) << SGIR_IRM_SHIFT) | \
 	 (((uint64_t) (aff2) & SGIR_AFF_MASK) << SGIR_AFF2_SHIFT) | \
 	 (((intid) & SGIR_INTID_MASK) << SGIR_INTID_SHIFT) | \
 	 (((aff1) & SGIR_AFF_MASK) << SGIR_AFF1_SHIFT) | \
 	 ((tgt) & SGIR_TGT_MASK))

 /*****************************************************************************
  * GICv3 ITS registers and constants
  *****************************************************************************/

 #define GITS_CTLR			0x0
 #define GITS_IIDR			0x4
 #define GITS_TYPER			0x8
 #define GITS_CBASER			0x80
 #define GITS_CWRITER			0x88
 #define GITS_CREADR			0x90
 #define GITS_BASER			0x100

 /* GITS_CTLR bit definitions */
 #define GITS_CTLR_ENABLED_BIT		1
 #define GITS_CTLR_QUIESCENT_SHIFT	31
 #define GITS_CTLR_QUIESCENT_BIT		(1U << GITS_CTLR_QUIESCENT_SHIFT)

 #ifndef __ASSEMBLY__

 #include <gic_common.h>
 #include <interrupt_props.h>
 #include <stdint.h>
 #include <utils_def.h>

 #define gicv3_is_intr_id_special_identifier(id)	\
 	(((id) >= PENDING_G1S_INTID) && ((id) <= GIC_SPURIOUS_INTERRUPT))

 /*******************************************************************************
  * Helper GICv3 macros for SEL1
  ******************************************************************************/
 #define gicv3_acknowledge_interrupt_sel1()	read_icc_iar1_el1() &\
 							IAR1_EL1_INTID_MASK
 #define gicv3_get_pending_interrupt_id_sel1()	read_icc_hppir1_el1() &\
 							HPPIR1_EL1_INTID_MASK
 #define gicv3_end_of_interrupt_sel1(id)		write_icc_eoir1_el1(id)


 /*******************************************************************************
  * Helper GICv3 macros for EL3
  ******************************************************************************/
 #define gicv3_acknowledge_interrupt()		read_icc_iar0_el1() &\
 							IAR0_EL1_INTID_MASK
 #define gicv3_end_of_interrupt(id)		write_icc_eoir0_el1(id)

 /*
  * This macro returns the total number of GICD registers corresponding to
  * the name.
  */
 #define GICD_NUM_REGS(reg_name)	\
 	DIV_ROUND_UP_2EVAL(TOTAL_SPI_INTR_NUM, (1 << reg_name ## _SHIFT))

 #define GICR_NUM_REGS(reg_name)	\
 	DIV_ROUND_UP_2EVAL(TOTAL_PCPU_INTR_NUM, (1 << reg_name ## _SHIFT))

 /* Interrupt ID mask for HPPIR, AHPPIR, IAR and AIAR CPU Interface registers */
 #define INT_ID_MASK	0xffffff

 /*******************************************************************************
  * This structure describes some of the implementation defined attributes of the
  * GICv3 IP. It is used by the platform port to specify these attributes in order
  * to initialise the GICV3 driver. The attributes are described below.
  *
  * The 'gicd_base' field contains the base address of the Distributor interface
  * programmer's view.
  *
  * The 'gicr_base' field contains the base address of the Re-distributor
  * interface programmer's view.
  *
  * The 'g0_interrupt_array' field is a pointer to an array in which each entry
  * corresponds to an ID of a Group 0 interrupt. This field is ignored when
  * 'interrupt_props' field is used. This field is deprecated.
  *
  * The 'g0_interrupt_num' field contains the number of entries in the
  * 'g0_interrupt_array'. This field is ignored when 'interrupt_props' field is
  * used. This field is deprecated.
  *
  * The 'g1s_interrupt_array' field is a pointer to an array in which each entry
  * corresponds to an ID of a Group 1 interrupt. This field is ignored when
  * 'interrupt_props' field is used. This field is deprecated.
  *
  * The 'g1s_interrupt_num' field contains the number of entries in the
  * 'g1s_interrupt_array'. This field must be 0 if 'interrupt_props' field is
  * used. This field is ignored when 'interrupt_props' field is used. This field
  * is deprecated.
  *
  * The 'interrupt_props' field is a pointer to an array that enumerates secure
  * interrupts and their properties. If this field is not NULL, both
  * 'g0_interrupt_array' and 'g1s_interrupt_array' fields are ignored.
  *
  * The 'interrupt_props_num' field contains the number of entries in the
  * 'interrupt_props' array. If this field is non-zero, both 'g0_interrupt_num'
  * and 'g1s_interrupt_num' are ignored.
  *
  * The 'rdistif_num' field contains the number of Redistributor interfaces the
  * GIC implements. This is equal to the number of CPUs or CPU interfaces
  * instantiated in the GIC.
  *
  * The 'rdistif_base_addrs' field is a pointer to an array that has an entry for
  * storing the base address of the Redistributor interface frame of each CPU in
  * the system. The size of the array = 'rdistif_num'. The base addresses are
  * detected during driver initialisation.
  *
  * The 'mpidr_to_core_pos' field is a pointer to a hash function which the
  * driver will use to convert an MPIDR value to a linear core index. This index
  * will be used for accessing the 'rdistif_base_addrs' array. This is an
  * optional field. A GICv3 implementation maps each MPIDR to a linear core index
  * as well. This mapping can be found by reading the "Affinity Value" and
  * "Processor Number" fields in the GICR_TYPER. It is IMP. DEF. if the
  * "Processor Numbers" are suitable to index into an array to access core
  * specific information. If this not the case, the platform port must provide a
  * hash function. Otherwise, the "Processor Number" field will be used to access
  * the array elements.
  ******************************************************************************/
 typedef unsigned int (*mpidr_hash_fn)(u_register_t mpidr);

 typedef struct gicv3_driver_data {
 	uintptr_t gicd_base;
 	uintptr_t gicr_base;
 #if !ERROR_DEPRECATED
 	unsigned int g0_interrupt_num __deprecated;
 	unsigned int g1s_interrupt_num __deprecated;
 	const unsigned int *g0_interrupt_array __deprecated;
 	const unsigned int *g1s_interrupt_array __deprecated;
 #endif
 	const interrupt_prop_t *interrupt_props;
 	unsigned int interrupt_props_num;
 	unsigned int rdistif_num;
 	uintptr_t *rdistif_base_addrs;
 	mpidr_hash_fn mpidr_to_core_pos;
 } gicv3_driver_data_t;

 typedef struct gicv3_redist_ctx {
 	/* 64 bits registers */
 	uint64_t gicr_propbaser;
 	uint64_t gicr_pendbaser;

 	/* 32 bits registers */
 	uint32_t gicr_ctlr;
 	uint32_t gicr_igroupr0;
 	uint32_t gicr_isenabler0;
 	uint32_t gicr_ispendr0;
 	uint32_t gicr_isactiver0;
 	uint32_t gicr_ipriorityr[GICR_NUM_REGS(IPRIORITYR)];
 	uint32_t gicr_icfgr0;
 	uint32_t gicr_icfgr1;
 	uint32_t gicr_igrpmodr0;
 	uint32_t gicr_nsacr;
 } gicv3_redist_ctx_t;

 typedef struct gicv3_dist_ctx {
 	/* 64 bits registers */
 	uint64_t gicd_irouter[TOTAL_SPI_INTR_NUM];

 	/* 32 bits registers */
 	uint32_t gicd_ctlr;
 	uint32_t gicd_igroupr[GICD_NUM_REGS(IGROUPR)];
 	uint32_t gicd_isenabler[GICD_NUM_REGS(ISENABLER)];
 	uint32_t gicd_ispendr[GICD_NUM_REGS(ISPENDR)];
 	uint32_t gicd_isactiver[GICD_NUM_REGS(ISACTIVER)];
 	uint32_t gicd_ipriorityr[GICD_NUM_REGS(IPRIORITYR)];
 	uint32_t gicd_icfgr[GICD_NUM_REGS(ICFGR)];
 	uint32_t gicd_igrpmodr[GICD_NUM_REGS(IGRPMODR)];
 	uint32_t gicd_nsacr[GICD_NUM_REGS(NSACR)];
 } gicv3_dist_ctx_t;

 typedef struct gicv3_its_ctx {
 	/* 64 bits registers */
 	uint64_t gits_cbaser;
 	uint64_t gits_cwriter;
 	uint64_t gits_baser[8];

 	/* 32 bits registers */
 	uint32_t gits_ctlr;
 } gicv3_its_ctx_t;

 /*******************************************************************************
  * GICv3 EL3 driver API
  ******************************************************************************/
 void gicv3_driver_init(const gicv3_driver_data_t *plat_driver_data);
 void gicv3_distif_init(void);
 void gicv3_rdistif_init(unsigned int proc_num);
 void gicv3_rdistif_on(unsigned int proc_num);
 void gicv3_rdistif_off(unsigned int proc_num);
 void gicv3_cpuif_enable(unsigned int proc_num);
 void gicv3_cpuif_disable(unsigned int proc_num);
 unsigned int gicv3_get_pending_interrupt_type(void);
 unsigned int gicv3_get_pending_interrupt_id(void);
 unsigned int gicv3_get_interrupt_type(unsigned int id,
 					  unsigned int proc_num);
 void gicv3_distif_init_restore(const gicv3_dist_ctx_t * const dist_ctx);
 void gicv3_distif_save(gicv3_dist_ctx_t * const dist_ctx);
 /*
  * gicv3_distif_post_restore and gicv3_distif_pre_save must be implemented if
  * gicv3_distif_save and gicv3_rdistif_init_restore are used. If no
  * implementation-defined sequence is needed at these steps, an empty function
  * can be provided.
  */
 void gicv3_distif_post_restore(unsigned int proc_num);
 void gicv3_distif_pre_save(unsigned int proc_num);
 void gicv3_rdistif_init_restore(unsigned int proc_num, const gicv3_redist_ctx_t * const rdist_ctx);
 void gicv3_rdistif_save(unsigned int proc_num, gicv3_redist_ctx_t * const rdist_ctx);
 void gicv3_its_save_disable(uintptr_t gits_base, gicv3_its_ctx_t * const its_ctx);
 void gicv3_its_restore(uintptr_t gits_base, const gicv3_its_ctx_t * const its_ctx);

 unsigned int gicv3_get_running_priority(void);
 unsigned int gicv3_get_interrupt_active(unsigned int id, unsigned int proc_num);
 void gicv3_enable_interrupt(unsigned int id, unsigned int proc_num);
 void gicv3_disable_interrupt(unsigned int id, unsigned int proc_num);
 void gicv3_set_interrupt_priority(unsigned int id, unsigned int proc_num,
 		unsigned int priority);
 void gicv3_set_interrupt_type(unsigned int id, unsigned int proc_num,
 		unsigned int type);
 void gicv3_raise_secure_g0_sgi(int sgi_num, u_register_t target);
 void gicv3_set_spi_routing(unsigned int id, unsigned int irm,
 		u_register_t mpidr);
 void gicv3_set_interrupt_pending(unsigned int id, unsigned int proc_num);
 void gicv3_clear_interrupt_pending(unsigned int id, unsigned int proc_num);
 unsigned int gicv3_set_pmr(unsigned int mask);

 #endif /* __ASSEMBLY__ */
 #endif /* __GICV3_H__ */
	/*
	* Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
	*
	* SPDX-License-Identifier: BSD-3-Clause
	*/

	#ifndef __GICV3_H__
	#define __GICV3_H__

	/*******************************************************************************
	* GICv3 miscellaneous definitions
	******************************************************************************/
	/* Interrupt group definitions */
	#define INTR_GROUP1S 0
	#define INTR_GROUP0 1
	#define INTR_GROUP1NS 2

	/* Interrupt IDs reported by the HPPIR and IAR registers */
	#define PENDING_G1S_INTID 1020
	#define PENDING_G1NS_INTID 1021

	/* Constant to categorize LPI interrupt */
	#define MIN_LPI_ID 8192

	/* GICv3 can only target up to 16 PEs with SGI */
	#define GICV3_MAX_SGI_TARGETS 16

	/*******************************************************************************
	* GICv3 specific Distributor interface register offsets and constants.
	******************************************************************************/
	#define GICD_STATUSR 0x10
	#define GICD_SETSPI_NSR 0x40
	#define GICD_CLRSPI_NSR 0x48
	#define GICD_SETSPI_SR 0x50
	#define GICD_CLRSPI_SR 0x50
	#define GICD_IGRPMODR 0xd00
	/*
	* GICD_IROUTER<n> register is at 0x6000 + 8n, where n is the interrupt id and
	* n >= 32, making the effective offset as 0x6100.
	*/
	#define GICD_IROUTER 0x6000
	#define GICD_PIDR2_GICV3 0xffe8

	#define IGRPMODR_SHIFT 5

	/* GICD_CTLR bit definitions */
	#define CTLR_ENABLE_G1NS_SHIFT 1
	#define CTLR_ENABLE_G1S_SHIFT 2
	#define CTLR_ARE_S_SHIFT 4
	#define CTLR_ARE_NS_SHIFT 5
	#define CTLR_DS_SHIFT 6
	#define CTLR_E1NWF_SHIFT 7
	#define GICD_CTLR_RWP_SHIFT 31

	#define CTLR_ENABLE_G1NS_MASK 0x1
	#define CTLR_ENABLE_G1S_MASK 0x1
	#define CTLR_ARE_S_MASK 0x1
	#define CTLR_ARE_NS_MASK 0x1
	#define CTLR_DS_MASK 0x1
	#define CTLR_E1NWF_MASK 0x1
	#define GICD_CTLR_RWP_MASK 0x1

	#define CTLR_ENABLE_G1NS_BIT (1 << CTLR_ENABLE_G1NS_SHIFT)
	#define CTLR_ENABLE_G1S_BIT (1 << CTLR_ENABLE_G1S_SHIFT)
	#define CTLR_ARE_S_BIT (1 << CTLR_ARE_S_SHIFT)
	#define CTLR_ARE_NS_BIT (1 << CTLR_ARE_NS_SHIFT)
	#define CTLR_DS_BIT (1 << CTLR_DS_SHIFT)
	#define CTLR_E1NWF_BIT (1 << CTLR_E1NWF_SHIFT)
	#define GICD_CTLR_RWP_BIT (1 << GICD_CTLR_RWP_SHIFT)

	/* GICD_IROUTER shifts and masks */
	#define IROUTER_SHIFT 0
	#define IROUTER_IRM_SHIFT 31
	#define IROUTER_IRM_MASK 0x1

	#define GICV3_IRM_PE 0
	#define GICV3_IRM_ANY 1

	#define NUM_OF_DIST_REGS 30

	/*******************************************************************************
	* GICv3 Re-distributor interface registers & constants
	******************************************************************************/
	#define GICR_PCPUBASE_SHIFT 0x11
	#define GICR_SGIBASE_OFFSET (1 << 0x10) /* 64 KB */
	#define GICR_CTLR 0x0
	#define GICR_TYPER 0x08
	#define GICR_WAKER 0x14
	#define GICR_PROPBASER 0x70
	#define GICR_PENDBASER 0x78
	#define GICR_IGROUPR0 (GICR_SGIBASE_OFFSET + 0x80)
	#define GICR_ISENABLER0 (GICR_SGIBASE_OFFSET + 0x100)
	#define GICR_ICENABLER0 (GICR_SGIBASE_OFFSET + 0x180)
	#define GICR_ISPENDR0 (GICR_SGIBASE_OFFSET + 0x200)
	#define GICR_ICPENDR0 (GICR_SGIBASE_OFFSET + 0x280)
	#define GICR_ISACTIVER0 (GICR_SGIBASE_OFFSET + 0x300)
	#define GICR_ICACTIVER0 (GICR_SGIBASE_OFFSET + 0x380)
	#define GICR_IPRIORITYR (GICR_SGIBASE_OFFSET + 0x400)
	#define GICR_ICFGR0 (GICR_SGIBASE_OFFSET + 0xc00)
	#define GICR_ICFGR1 (GICR_SGIBASE_OFFSET + 0xc04)
	#define GICR_IGRPMODR0 (GICR_SGIBASE_OFFSET + 0xd00)
	#define GICR_NSACR (GICR_SGIBASE_OFFSET + 0xe00)

	/* GICR_CTLR bit definitions */
	#define GICR_CTLR_UWP_SHIFT 31
	#define GICR_CTLR_UWP_MASK 0x1
	#define GICR_CTLR_UWP_BIT (1U << GICR_CTLR_UWP_SHIFT)
	#define GICR_CTLR_RWP_SHIFT 3
	#define GICR_CTLR_RWP_MASK 0x1
	#define GICR_CTLR_RWP_BIT (1U << GICR_CTLR_RWP_SHIFT)
	#define GICR_CTLR_EN_LPIS_BIT (1U << 0)

	/* GICR_WAKER bit definitions */
	#define WAKER_CA_SHIFT 2
	#define WAKER_PS_SHIFT 1

	#define WAKER_CA_MASK 0x1
	#define WAKER_PS_MASK 0x1

	#define WAKER_CA_BIT (1 << WAKER_CA_SHIFT)
	#define WAKER_PS_BIT (1 << WAKER_PS_SHIFT)

	/* GICR_TYPER bit definitions */
	#define TYPER_AFF_VAL_SHIFT 32
	#define TYPER_PROC_NUM_SHIFT 8
	#define TYPER_LAST_SHIFT 4

	#define TYPER_AFF_VAL_MASK 0xffffffff
	#define TYPER_PROC_NUM_MASK 0xffff
	#define TYPER_LAST_MASK 0x1

	#define TYPER_LAST_BIT (1 << TYPER_LAST_SHIFT)

	#define NUM_OF_REDIST_REGS 30

	/*******************************************************************************
	* GICv3 CPU interface registers & constants
	******************************************************************************/
	/* ICC_SRE bit definitions*/
	#define ICC_SRE_EN_BIT (1 << 3)
	#define ICC_SRE_DIB_BIT (1 << 2)
	#define ICC_SRE_DFB_BIT (1 << 1)
	#define ICC_SRE_SRE_BIT (1 << 0)

	/* ICC_IGRPEN1_EL3 bit definitions */
	#define IGRPEN1_EL3_ENABLE_G1NS_SHIFT 0
	#define IGRPEN1_EL3_ENABLE_G1S_SHIFT 1

	#define IGRPEN1_EL3_ENABLE_G1NS_BIT (1 << IGRPEN1_EL3_ENABLE_G1NS_SHIFT)
	#define IGRPEN1_EL3_ENABLE_G1S_BIT (1 << IGRPEN1_EL3_ENABLE_G1S_SHIFT)

	/* ICC_IGRPEN0_EL1 bit definitions */
	#define IGRPEN1_EL1_ENABLE_G0_SHIFT 0
	#define IGRPEN1_EL1_ENABLE_G0_BIT (1 << IGRPEN1_EL1_ENABLE_G0_SHIFT)

	/* ICC_HPPIR0_EL1 bit definitions */
	#define HPPIR0_EL1_INTID_SHIFT 0
	#define HPPIR0_EL1_INTID_MASK 0xffffff

	/* ICC_HPPIR1_EL1 bit definitions */
	#define HPPIR1_EL1_INTID_SHIFT 0
	#define HPPIR1_EL1_INTID_MASK 0xffffff

	/* ICC_IAR0_EL1 bit definitions */
	#define IAR0_EL1_INTID_SHIFT 0
	#define IAR0_EL1_INTID_MASK 0xffffff

	/* ICC_IAR1_EL1 bit definitions */
	#define IAR1_EL1_INTID_SHIFT 0
	#define IAR1_EL1_INTID_MASK 0xffffff

	/* ICC SGI macros */
	#define SGIR_TGT_MASK 0xffff
	#define SGIR_AFF1_SHIFT 16
	#define SGIR_INTID_SHIFT 24
	#define SGIR_INTID_MASK 0xf
	#define SGIR_AFF2_SHIFT 32
	#define SGIR_IRM_SHIFT 40
	#define SGIR_IRM_MASK 0x1
	#define SGIR_AFF3_SHIFT 48
	#define SGIR_AFF_MASK 0xf

	#define SGIR_IRM_TO_AFF 0

	#define GICV3_SGIR_VALUE(aff3, aff2, aff1, intid, irm, tgt) \
	((((uint64_t) (aff3) & SGIR_AFF_MASK) << SGIR_AFF3_SHIFT) \| \
	(((uint64_t) (irm) & SGIR_IRM_MASK) << SGIR_IRM_SHIFT) \| \
	(((uint64_t) (aff2) & SGIR_AFF_MASK) << SGIR_AFF2_SHIFT) \| \
	(((intid) & SGIR_INTID_MASK) << SGIR_INTID_SHIFT) \| \
	(((aff1) & SGIR_AFF_MASK) << SGIR_AFF1_SHIFT) \| \
	((tgt) & SGIR_TGT_MASK))

	/*****************************************************************************
	* GICv3 ITS registers and constants
	*****************************************************************************/

	#define GITS_CTLR 0x0
	#define GITS_IIDR 0x4
	#define GITS_TYPER 0x8
	#define GITS_CBASER 0x80
	#define GITS_CWRITER 0x88
	#define GITS_CREADR 0x90
	#define GITS_BASER 0x100

	/* GITS_CTLR bit definitions */
	#define GITS_CTLR_ENABLED_BIT 1
	#define GITS_CTLR_QUIESCENT_SHIFT 31
	#define GITS_CTLR_QUIESCENT_BIT (1U << GITS_CTLR_QUIESCENT_SHIFT)

	#ifndef __ASSEMBLY__

	#include <gic_common.h>
	#include <interrupt_props.h>
	#include <stdint.h>
	#include <utils_def.h>

	#define gicv3_is_intr_id_special_identifier(id) \
	(((id) >= PENDING_G1S_INTID) && ((id) <= GIC_SPURIOUS_INTERRUPT))

	/*******************************************************************************
	* Helper GICv3 macros for SEL1
	******************************************************************************/
	#define gicv3_acknowledge_interrupt_sel1() read_icc_iar1_el1() &\
	IAR1_EL1_INTID_MASK
	#define gicv3_get_pending_interrupt_id_sel1() read_icc_hppir1_el1() &\
	HPPIR1_EL1_INTID_MASK
	#define gicv3_end_of_interrupt_sel1(id) write_icc_eoir1_el1(id)


	/*******************************************************************************
	* Helper GICv3 macros for EL3
	******************************************************************************/
	#define gicv3_acknowledge_interrupt() read_icc_iar0_el1() &\
	IAR0_EL1_INTID_MASK
	#define gicv3_end_of_interrupt(id) write_icc_eoir0_el1(id)

	/*
	* This macro returns the total number of GICD registers corresponding to
	* the name.
	*/
	#define GICD_NUM_REGS(reg_name) \
	DIV_ROUND_UP_2EVAL(TOTAL_SPI_INTR_NUM, (1 << reg_name ## _SHIFT))

	#define GICR_NUM_REGS(reg_name) \
	DIV_ROUND_UP_2EVAL(TOTAL_PCPU_INTR_NUM, (1 << reg_name ## _SHIFT))

	/* Interrupt ID mask for HPPIR, AHPPIR, IAR and AIAR CPU Interface registers */
	#define INT_ID_MASK 0xffffff

	/*******************************************************************************
	* This structure describes some of the implementation defined attributes of the
	* GICv3 IP. It is used by the platform port to specify these attributes in order
	* to initialise the GICV3 driver. The attributes are described below.
	*
	* The 'gicd_base' field contains the base address of the Distributor interface
	* programmer's view.
	*
	* The 'gicr_base' field contains the base address of the Re-distributor
	* interface programmer's view.
	*
	* The 'g0_interrupt_array' field is a pointer to an array in which each entry
	* corresponds to an ID of a Group 0 interrupt. This field is ignored when
	* 'interrupt_props' field is used. This field is deprecated.
	*
	* The 'g0_interrupt_num' field contains the number of entries in the
	* 'g0_interrupt_array'. This field is ignored when 'interrupt_props' field is
	* used. This field is deprecated.
	*
	* The 'g1s_interrupt_array' field is a pointer to an array in which each entry
	* corresponds to an ID of a Group 1 interrupt. This field is ignored when
	* 'interrupt_props' field is used. This field is deprecated.
	*
	* The 'g1s_interrupt_num' field contains the number of entries in the
	* 'g1s_interrupt_array'. This field must be 0 if 'interrupt_props' field is
	* used. This field is ignored when 'interrupt_props' field is used. This field
	* is deprecated.
	*
	* The 'interrupt_props' field is a pointer to an array that enumerates secure
	* interrupts and their properties. If this field is not NULL, both
	* 'g0_interrupt_array' and 'g1s_interrupt_array' fields are ignored.
	*
	* The 'interrupt_props_num' field contains the number of entries in the
	* 'interrupt_props' array. If this field is non-zero, both 'g0_interrupt_num'
	* and 'g1s_interrupt_num' are ignored.
	*
	* The 'rdistif_num' field contains the number of Redistributor interfaces the
	* GIC implements. This is equal to the number of CPUs or CPU interfaces
	* instantiated in the GIC.
	*
	* The 'rdistif_base_addrs' field is a pointer to an array that has an entry for
	* storing the base address of the Redistributor interface frame of each CPU in
	* the system. The size of the array = 'rdistif_num'. The base addresses are
	* detected during driver initialisation.
	*
	* The 'mpidr_to_core_pos' field is a pointer to a hash function which the
	* driver will use to convert an MPIDR value to a linear core index. This index
	* will be used for accessing the 'rdistif_base_addrs' array. This is an
	* optional field. A GICv3 implementation maps each MPIDR to a linear core index
	* as well. This mapping can be found by reading the "Affinity Value" and
	* "Processor Number" fields in the GICR_TYPER. It is IMP. DEF. if the
	* "Processor Numbers" are suitable to index into an array to access core
	* specific information. If this not the case, the platform port must provide a
	* hash function. Otherwise, the "Processor Number" field will be used to access
	* the array elements.
	******************************************************************************/
	typedef unsigned int (*mpidr_hash_fn)(u_register_t mpidr);

	typedef struct gicv3_driver_data {
	uintptr_t gicd_base;
	uintptr_t gicr_base;
	#if !ERROR_DEPRECATED
	unsigned int g0_interrupt_num __deprecated;
	unsigned int g1s_interrupt_num __deprecated;
	const unsigned int *g0_interrupt_array __deprecated;
	const unsigned int *g1s_interrupt_array __deprecated;
	#endif
	const interrupt_prop_t *interrupt_props;
	unsigned int interrupt_props_num;
	unsigned int rdistif_num;
	uintptr_t *rdistif_base_addrs;
	mpidr_hash_fn mpidr_to_core_pos;
	} gicv3_driver_data_t;

	typedef struct gicv3_redist_ctx {
	/* 64 bits registers */
	uint64_t gicr_propbaser;
	uint64_t gicr_pendbaser;

	/* 32 bits registers */
	uint32_t gicr_ctlr;
	uint32_t gicr_igroupr0;
	uint32_t gicr_isenabler0;
	uint32_t gicr_ispendr0;
	uint32_t gicr_isactiver0;
	uint32_t gicr_ipriorityr[GICR_NUM_REGS(IPRIORITYR)];
	uint32_t gicr_icfgr0;
	uint32_t gicr_icfgr1;
	uint32_t gicr_igrpmodr0;
	uint32_t gicr_nsacr;
	} gicv3_redist_ctx_t;

	typedef struct gicv3_dist_ctx {
	/* 64 bits registers */
	uint64_t gicd_irouter[TOTAL_SPI_INTR_NUM];

	/* 32 bits registers */
	uint32_t gicd_ctlr;
	uint32_t gicd_igroupr[GICD_NUM_REGS(IGROUPR)];
	uint32_t gicd_isenabler[GICD_NUM_REGS(ISENABLER)];
	uint32_t gicd_ispendr[GICD_NUM_REGS(ISPENDR)];
	uint32_t gicd_isactiver[GICD_NUM_REGS(ISACTIVER)];
	uint32_t gicd_ipriorityr[GICD_NUM_REGS(IPRIORITYR)];
	uint32_t gicd_icfgr[GICD_NUM_REGS(ICFGR)];
	uint32_t gicd_igrpmodr[GICD_NUM_REGS(IGRPMODR)];
	uint32_t gicd_nsacr[GICD_NUM_REGS(NSACR)];
	} gicv3_dist_ctx_t;

	typedef struct gicv3_its_ctx {
	/* 64 bits registers */
	uint64_t gits_cbaser;
	uint64_t gits_cwriter;
	uint64_t gits_baser[8];

	/* 32 bits registers */
	uint32_t gits_ctlr;
	} gicv3_its_ctx_t;

	/*******************************************************************************
	* GICv3 EL3 driver API
	******************************************************************************/
	void gicv3_driver_init(const gicv3_driver_data_t *plat_driver_data);
	void gicv3_distif_init(void);
	void gicv3_rdistif_init(unsigned int proc_num);
	void gicv3_rdistif_on(unsigned int proc_num);
	void gicv3_rdistif_off(unsigned int proc_num);
	void gicv3_cpuif_enable(unsigned int proc_num);
	void gicv3_cpuif_disable(unsigned int proc_num);
	unsigned int gicv3_get_pending_interrupt_type(void);
	unsigned int gicv3_get_pending_interrupt_id(void);
	unsigned int gicv3_get_interrupt_type(unsigned int id,
	unsigned int proc_num);
	void gicv3_distif_init_restore(const gicv3_dist_ctx_t * const dist_ctx);
	void gicv3_distif_save(gicv3_dist_ctx_t * const dist_ctx);
	/*
	* gicv3_distif_post_restore and gicv3_distif_pre_save must be implemented if
	* gicv3_distif_save and gicv3_rdistif_init_restore are used. If no
	* implementation-defined sequence is needed at these steps, an empty function
	* can be provided.
	*/
	void gicv3_distif_post_restore(unsigned int proc_num);
	void gicv3_distif_pre_save(unsigned int proc_num);
	void gicv3_rdistif_init_restore(unsigned int proc_num, const gicv3_redist_ctx_t * const rdist_ctx);
	void gicv3_rdistif_save(unsigned int proc_num, gicv3_redist_ctx_t * const rdist_ctx);
	void gicv3_its_save_disable(uintptr_t gits_base, gicv3_its_ctx_t * const its_ctx);
	void gicv3_its_restore(uintptr_t gits_base, const gicv3_its_ctx_t * const its_ctx);

	unsigned int gicv3_get_running_priority(void);
	unsigned int gicv3_get_interrupt_active(unsigned int id, unsigned int proc_num);
	void gicv3_enable_interrupt(unsigned int id, unsigned int proc_num);
	void gicv3_disable_interrupt(unsigned int id, unsigned int proc_num);
	void gicv3_set_interrupt_priority(unsigned int id, unsigned int proc_num,
	unsigned int priority);
	void gicv3_set_interrupt_type(unsigned int id, unsigned int proc_num,
	unsigned int type);
	void gicv3_raise_secure_g0_sgi(int sgi_num, u_register_t target);
	void gicv3_set_spi_routing(unsigned int id, unsigned int irm,
	u_register_t mpidr);
	void gicv3_set_interrupt_pending(unsigned int id, unsigned int proc_num);
	void gicv3_clear_interrupt_pending(unsigned int id, unsigned int proc_num);
	unsigned int gicv3_set_pmr(unsigned int mask);

	#endif /* __ASSEMBLY__ */
	#endif /* __GICV3_H__ */