| # |
| # Copyright (c) 2018, Renesas Electronics Corporation. All rights reserved. |
| # |
| # SPDX-License-Identifier: BSD-3-Clause |
| # |
| |
| PROGRAMMABLE_RESET_ADDRESS := 0 |
| COLD_BOOT_SINGLE_CPU := 1 |
| ARM_CCI_PRODUCT_ID := 500 |
| TRUSTED_BOARD_BOOT := 1 |
| RESET_TO_BL31 := 1 |
| GENERATE_COT := 1 |
| BL2_AT_EL3 := 1 |
| ENABLE_SVE_FOR_NS := 0 |
| |
| CRASH_REPORTING := 1 |
| HANDLE_EA_EL3_FIRST := 1 |
| |
| $(eval $(call add_define,PLAT_EXTRA_LD_SCRIPT)) |
| |
| ifeq (${SPD},none) |
| SPD_NONE:=1 |
| $(eval $(call add_define,SPD_NONE)) |
| endif |
| |
| # LSI setting common define |
| RCAR_H3:=0 |
| RCAR_M3:=1 |
| RCAR_M3N:=2 |
| RCAR_E3:=3 |
| RCAR_H3N:=4 |
| RCAR_AUTO:=99 |
| $(eval $(call add_define,RCAR_H3)) |
| $(eval $(call add_define,RCAR_M3)) |
| $(eval $(call add_define,RCAR_M3N)) |
| $(eval $(call add_define,RCAR_E3)) |
| $(eval $(call add_define,RCAR_H3N)) |
| $(eval $(call add_define,RCAR_AUTO)) |
| RCAR_CUT_10:=0 |
| RCAR_CUT_11:=1 |
| RCAR_CUT_20:=10 |
| RCAR_CUT_30:=20 |
| $(eval $(call add_define,RCAR_CUT_10)) |
| $(eval $(call add_define,RCAR_CUT_11)) |
| $(eval $(call add_define,RCAR_CUT_20)) |
| $(eval $(call add_define,RCAR_CUT_30)) |
| |
| ifndef LSI |
| $(error "Error: Unknown LSI. Please use LSI=<LSI name> to specify the LSI") |
| else |
| ifeq (${LSI},AUTO) |
| RCAR_LSI:=${RCAR_AUTO} |
| else ifeq (${LSI},H3) |
| RCAR_LSI:=${RCAR_H3} |
| ifndef LSI_CUT |
| # enable compatible function. |
| RCAR_LSI_CUT_COMPAT := 1 |
| $(eval $(call add_define,RCAR_LSI_CUT_COMPAT)) |
| else |
| # disable compatible function. |
| ifeq (${LSI_CUT},10) |
| RCAR_LSI_CUT:=0 |
| else ifeq (${LSI_CUT},11) |
| RCAR_LSI_CUT:=1 |
| else ifeq (${LSI_CUT},20) |
| RCAR_LSI_CUT:=10 |
| else ifeq (${LSI_CUT},30) |
| RCAR_LSI_CUT:=20 |
| else |
| $(error "Error: ${LSI_CUT} is not supported.") |
| endif |
| $(eval $(call add_define,RCAR_LSI_CUT)) |
| endif |
| else ifeq (${LSI},H3N) |
| RCAR_LSI:=${RCAR_H3N} |
| ifndef LSI_CUT |
| # enable compatible function. |
| RCAR_LSI_CUT_COMPAT := 1 |
| $(eval $(call add_define,RCAR_LSI_CUT_COMPAT)) |
| else |
| # disable compatible function. |
| ifeq (${LSI_CUT},30) |
| RCAR_LSI_CUT:=20 |
| else |
| $(error "Error: ${LSI_CUT} is not supported.") |
| endif |
| $(eval $(call add_define,RCAR_LSI_CUT)) |
| endif |
| else ifeq (${LSI},M3) |
| RCAR_LSI:=${RCAR_M3} |
| ifndef LSI_CUT |
| # enable compatible function. |
| RCAR_LSI_CUT_COMPAT := 1 |
| $(eval $(call add_define,RCAR_LSI_CUT_COMPAT)) |
| else |
| # disable compatible function. |
| ifeq (${LSI_CUT},10) |
| RCAR_LSI_CUT:=0 |
| else ifeq (${LSI_CUT},11) |
| RCAR_LSI_CUT:=1 |
| else |
| $(error "Error: ${LSI_CUT} is not supported.") |
| endif |
| $(eval $(call add_define,RCAR_LSI_CUT)) |
| endif |
| else ifeq (${LSI},M3N) |
| RCAR_LSI:=${RCAR_M3N} |
| ifndef LSI_CUT |
| # enable compatible function. |
| RCAR_LSI_CUT_COMPAT := 1 |
| $(eval $(call add_define,RCAR_LSI_CUT_COMPAT)) |
| else |
| # disable compatible function. |
| ifeq (${LSI_CUT},10) |
| RCAR_LSI_CUT:=0 |
| else ifeq (${LSI_CUT},11) |
| RCAR_LSI_CUT:=1 |
| else |
| $(error "Error: ${LSI_CUT} is not supported.") |
| endif |
| $(eval $(call add_define,RCAR_LSI_CUT)) |
| endif |
| else ifeq (${LSI},E3) |
| RCAR_LSI:=${RCAR_E3} |
| ifndef LSI_CUT |
| # enable compatible function. |
| RCAR_LSI_CUT_COMPAT := 1 |
| $(eval $(call add_define,RCAR_LSI_CUT_COMPAT)) |
| else |
| # disable compatible function. |
| ifeq (${LSI_CUT},10) |
| RCAR_LSI_CUT:=0 |
| else |
| $(error "Error: ${LSI_CUT} is not supported.") |
| endif |
| $(eval $(call add_define,RCAR_LSI_CUT)) |
| endif |
| else |
| $(error "Error: ${LSI} is not supported.") |
| endif |
| $(eval $(call add_define,RCAR_LSI)) |
| endif |
| |
| # lock RPC HYPERFLASH access by default |
| # unlock to repogram the ATF firmware from u-boot |
| ifndef RCAR_RPC_HYPERFLASH_LOCKED |
| RCAR_RPC_HYPERFLASH_LOCKED := 1 |
| endif |
| $(eval $(call add_define,RCAR_RPC_HYPERFLASH_LOCKED)) |
| |
| # Process RCAR_SECURE_BOOT flag |
| ifndef RCAR_SECURE_BOOT |
| RCAR_SECURE_BOOT := 1 |
| endif |
| $(eval $(call add_define,RCAR_SECURE_BOOT)) |
| |
| # Process RCAR_QOS_TYPE flag |
| ifndef RCAR_QOS_TYPE |
| RCAR_QOS_TYPE := 0 |
| endif |
| $(eval $(call add_define,RCAR_QOS_TYPE)) |
| |
| # Process RCAR_DRAM_SPLIT flag |
| ifndef RCAR_DRAM_SPLIT |
| RCAR_DRAM_SPLIT := 0 |
| endif |
| $(eval $(call add_define,RCAR_DRAM_SPLIT)) |
| |
| # Process RCAR_BL33_EXECUTION_EL flag |
| ifndef RCAR_BL33_EXECUTION_EL |
| RCAR_BL33_EXECUTION_EL := 0 |
| endif |
| $(eval $(call add_define,RCAR_BL33_EXECUTION_EL)) |
| |
| # Process RCAR_AVS_SETTING_ENABLE flag |
| ifeq (${RCAR_AVS_SETTING_ENABLE},0) |
| AVS_SETTING_ENABLE := 0 |
| else |
| AVS_SETTING_ENABLE := 1 |
| endif |
| $(eval $(call add_define,AVS_SETTING_ENABLE)) |
| |
| # Process RCAR_LOSSY_ENABLE flag |
| ifndef RCAR_LOSSY_ENABLE |
| RCAR_LOSSY_ENABLE := 0 |
| endif |
| $(eval $(call add_define,RCAR_LOSSY_ENABLE)) |
| |
| # Process LIFEC_DBSC_PROTECT_ENABLE flag |
| ifndef LIFEC_DBSC_PROTECT_ENABLE |
| LIFEC_DBSC_PROTECT_ENABLE := 1 |
| endif |
| $(eval $(call add_define,LIFEC_DBSC_PROTECT_ENABLE)) |
| |
| # Process PMIC_ROHM_BD9571 flag |
| ifndef PMIC_ROHM_BD9571 |
| PMIC_ROHM_BD9571 := 1 |
| endif |
| $(eval $(call add_define,PMIC_ROHM_BD9571)) |
| |
| # Process PMIC_LEVEL_MODE flag |
| ifndef PMIC_LEVEL_MODE |
| PMIC_LEVEL_MODE := 1 |
| endif |
| $(eval $(call add_define,PMIC_LEVEL_MODE)) |
| |
| # Process RCAR_GEN3_ULCB flag |
| ifndef RCAR_GEN3_ULCB |
| RCAR_GEN3_ULCB := 0 |
| endif |
| ifeq (${RCAR_GEN3_ULCB},1) |
| BOARD_DEFAULT := 0x10 |
| $(eval $(call add_define,BOARD_DEFAULT)) |
| endif |
| $(eval $(call add_define,RCAR_GEN3_ULCB)) |
| |
| # Process RCAR_REF_INT flag |
| ifndef RCAR_REF_INT |
| RCAR_REF_INT :=0 |
| endif |
| $(eval $(call add_define,RCAR_REF_INT)) |
| |
| # Process RCAR_REWT_TRAINING flag |
| ifndef RCAR_REWT_TRAINING |
| RCAR_REWT_TRAINING := 0 |
| endif |
| $(eval $(call add_define,RCAR_REWT_TRAINING)) |
| |
| # Process RCAR_SYSTEM_SUSPEND flag |
| ifndef RCAR_SYSTEM_SUSPEND |
| RCAR_SYSTEM_SUSPEND := 1 |
| endif |
| $(eval $(call add_define,RCAR_SYSTEM_SUSPEND)) |
| |
| # SYSTEM_SUSPEND requires power control of PMIC etc. |
| # When executing SYSTEM_SUSPEND other than Salvator-X, Salvator-XS and Ebisu, |
| # processing equivalent to that implemented in PMIC_ROHM_BD9571 is necessary. |
| ifeq (${RCAR_SYSTEM_SUSPEND},1) |
| ifeq (${PMIC_ROHM_BD9571},0) |
| $(error "Error: When you want RCAR_SYSTEM_SUSPEND to be enable, please also set PMIC_ROHM_BD9571 to enable.") |
| endif |
| endif |
| |
| # Process RCAR_DRAM_LPDDR4_MEMCONF flag |
| ifndef RCAR_DRAM_LPDDR4_MEMCONF |
| RCAR_DRAM_LPDDR4_MEMCONF :=1 |
| endif |
| $(eval $(call add_define,RCAR_DRAM_LPDDR4_MEMCONF)) |
| |
| # Process RCAR_DRAM_DDR3L_MEMCONF flag |
| ifndef RCAR_DRAM_DDR3L_MEMCONF |
| RCAR_DRAM_DDR3L_MEMCONF :=1 |
| endif |
| $(eval $(call add_define,RCAR_DRAM_DDR3L_MEMCONF)) |
| |
| # Process RCAR_DRAM_DDR3L_MEMDUAL flag |
| ifndef RCAR_DRAM_DDR3L_MEMDUAL |
| RCAR_DRAM_DDR3L_MEMDUAL :=1 |
| endif |
| $(eval $(call add_define,RCAR_DRAM_DDR3L_MEMDUAL)) |
| |
| # Process RCAR_BL33_ARG0 flag |
| ifdef RCAR_BL33_ARG0 |
| $(eval $(call add_define,RCAR_BL33_ARG0)) |
| endif |
| |
| #Process RCAR_BL2_DCACHE flag |
| ifndef RCAR_BL2_DCACHE |
| RCAR_BL2_DCACHE := 0 |
| endif |
| $(eval $(call add_define,RCAR_BL2_DCACHE)) |
| |
| # Process RCAR_DRAM_CHANNEL flag |
| ifndef RCAR_DRAM_CHANNEL |
| RCAR_DRAM_CHANNEL :=15 |
| endif |
| $(eval $(call add_define,RCAR_DRAM_CHANNEL)) |
| |
| #Process RCAR_SYSTEM_RESET_KEEPON_DDR flag |
| ifndef RCAR_SYSTEM_RESET_KEEPON_DDR |
| RCAR_SYSTEM_RESET_KEEPON_DDR := 0 |
| endif |
| $(eval $(call add_define,RCAR_SYSTEM_RESET_KEEPON_DDR)) |
| |
| # RCAR_SYSTEM_RESET_KEEPON_DDR requires power control of PMIC etc. |
| # When executing SYSTEM_SUSPEND other than Salvator-X, Salvator-XS and Ebisu, |
| # processing equivalent to that implemented in PMIC_ROHM_BD9571 is necessary. |
| # Also, it is necessary to enable RCAR_SYSTEM_SUSPEND. |
| ifeq (${RCAR_SYSTEM_RESET_KEEPON_DDR},1) |
| ifeq (${PMIC_ROHM_BD9571},0) |
| $(error "Error: When you want RCAR_SYSTEM_RESET_KEEPON_DDR to be enable, please also set PMIC_ROHM_BD9571 to enable.") |
| endif |
| ifeq (${RCAR_SYSTEM_SUSPEND},0) |
| $(error "Error: When you want RCAR_SYSTEM_RESET_KEEPON_DDR to be enable, please also set RCAR_SYSTEM_SUSPEND to enable.") |
| endif |
| endif |
| |
| # Enable workarounds for selected Cortex-A53 erratas. |
| ERRATA_A53_835769 := 1 |
| ERRATA_A53_843419 := 1 |
| ERRATA_A53_855873 := 1 |
| |
| # Enable workarounds for selected Cortex-A57 erratas. |
| ERRATA_A57_859972 := 1 |
| ERRATA_A57_813419 := 1 |
| |
| include drivers/staging/renesas/rcar/ddr/ddr.mk |
| include drivers/staging/renesas/rcar/qos/qos.mk |
| include drivers/staging/renesas/rcar/pfc/pfc.mk |
| include lib/libfdt/libfdt.mk |
| |
| PLAT_INCLUDES := -Idrivers/staging/renesas/rcar/ddr \ |
| -Idrivers/staging/renesas/rcar/qos \ |
| -Idrivers/renesas/rcar/iic_dvfs \ |
| -Idrivers/renesas/rcar/board \ |
| -Idrivers/renesas/rcar/cpld/ \ |
| -Idrivers/renesas/rcar/avs \ |
| -Idrivers/renesas/rcar/delay \ |
| -Idrivers/renesas/rcar/rom \ |
| -Idrivers/renesas/rcar/scif \ |
| -Idrivers/renesas/rcar/emmc \ |
| -Idrivers/renesas/rcar/pwrc \ |
| -Idrivers/renesas/rcar/io \ |
| -Iplat/renesas/rcar/include/registers \ |
| -Iplat/renesas/rcar/include \ |
| -Iplat/renesas/rcar |
| |
| PLAT_BL_COMMON_SOURCES := drivers/renesas/rcar/iic_dvfs/iic_dvfs.c \ |
| plat/renesas/rcar/rcar_common.c |
| |
| RCAR_GIC_SOURCES := drivers/arm/gic/common/gic_common.c \ |
| drivers/arm/gic/v2/gicv2_main.c \ |
| drivers/arm/gic/v2/gicv2_helpers.c \ |
| plat/common/plat_gicv2.c |
| |
| BL2_SOURCES += ${RCAR_GIC_SOURCES} \ |
| lib/cpus/aarch64/cortex_a53.S \ |
| lib/cpus/aarch64/cortex_a57.S \ |
| ${LIBFDT_SRCS} \ |
| common/desc_image_load.c \ |
| plat/renesas/rcar/aarch64/platform_common.c \ |
| plat/renesas/rcar/aarch64/plat_helpers.S \ |
| plat/renesas/rcar/bl2_interrupt_error.c \ |
| plat/renesas/rcar/bl2_secure_setting.c \ |
| plat/renesas/rcar/bl2_plat_setup.c \ |
| plat/renesas/rcar/plat_storage.c \ |
| plat/renesas/rcar/bl2_plat_mem_params_desc.c \ |
| plat/renesas/rcar/plat_image_load.c \ |
| plat/renesas/rcar/bl2_cpg_init.c \ |
| drivers/renesas/rcar/console/rcar_printf.c \ |
| drivers/renesas/rcar/scif/scif.S \ |
| drivers/renesas/rcar/common.c \ |
| drivers/renesas/rcar/io/io_emmcdrv.c \ |
| drivers/renesas/rcar/io/io_memdrv.c \ |
| drivers/renesas/rcar/io/io_rcar.c \ |
| drivers/renesas/rcar/auth/auth_mod.c \ |
| drivers/renesas/rcar/rpc/rpc_driver.c \ |
| drivers/renesas/rcar/dma/dma_driver.c \ |
| drivers/renesas/rcar/avs/avs_driver.c \ |
| drivers/renesas/rcar/delay/micro_delay.c \ |
| drivers/renesas/rcar/emmc/emmc_interrupt.c \ |
| drivers/renesas/rcar/emmc/emmc_utility.c \ |
| drivers/renesas/rcar/emmc/emmc_mount.c \ |
| drivers/renesas/rcar/emmc/emmc_init.c \ |
| drivers/renesas/rcar/emmc/emmc_read.c \ |
| drivers/renesas/rcar/emmc/emmc_cmd.c \ |
| drivers/renesas/rcar/watchdog/swdt.c \ |
| drivers/renesas/rcar/rom/rom_api.c \ |
| drivers/renesas/rcar/board/board.c \ |
| drivers/io/io_storage.c |
| |
| BL31_SOURCES += ${RCAR_GIC_SOURCES} \ |
| lib/cpus/aarch64/cortex_a53.S \ |
| lib/cpus/aarch64/cortex_a57.S \ |
| plat/common/plat_psci_common.c \ |
| plat/renesas/rcar/plat_topology.c \ |
| plat/renesas/rcar/aarch64/plat_helpers.S \ |
| plat/renesas/rcar/aarch64/platform_common.c \ |
| plat/renesas/rcar/bl31_plat_setup.c \ |
| plat/renesas/rcar/plat_pm.c \ |
| drivers/renesas/rcar/console/rcar_console.S \ |
| drivers/renesas/rcar/console/rcar_printf.c \ |
| drivers/renesas/rcar/delay/micro_delay.c \ |
| drivers/renesas/rcar/pwrc/call_sram.S \ |
| drivers/renesas/rcar/pwrc/pwrc.c \ |
| drivers/renesas/rcar/common.c \ |
| drivers/arm/cci/cci.c |
| |
| ifeq (${RCAR_GEN3_ULCB},1) |
| BL31_SOURCES += drivers/renesas/rcar/cpld/ulcb_cpld.c |
| endif |
| |
| include lib/xlat_tables_v2/xlat_tables.mk |
| include drivers/auth/mbedtls/mbedtls_crypto.mk |
| PLAT_BL_COMMON_SOURCES += ${XLAT_TABLES_LIB_SRCS} |
| |
| # build the layout images for the bootrom and the necessary srecords |
| rcar: rcar_layout_tool rcar_srecord |
| distclean realclean clean: clean_layout_tool clean_srecord |
| |
| # layout images |
| LAYOUT_TOOLPATH ?= tools/renesas/rcar_layout_create |
| |
| clean_layout_tool: |
| @echo "clean layout tool" |
| ${Q}${MAKE} -C ${LAYOUT_TOOLPATH} clean |
| |
| .PHONY: rcar_layout_tool |
| rcar_layout_tool: |
| @echo "generating layout srecs" |
| ${Q}${MAKE} CPPFLAGS="-D=AARCH64" --no-print-directory -C ${LAYOUT_TOOLPATH} |
| |
| # srecords |
| SREC_PATH = ${BUILD_PLAT} |
| BL2_ELF_SRC = ${SREC_PATH}/bl2/bl2.elf |
| BL31_ELF_SRC = ${SREC_PATH}/bl31/bl31.elf |
| |
| clean_srecord: |
| @echo "clean bl2 and bl31 srecs" |
| rm -f ${SREC_PATH}/bl2.srec ${SREC_PATH}/bl31.srec |
| |
| .PHONY: rcar_srecord |
| rcar_srecord: $(BL2_ELF_SRC) $(BL31_ELF_SRC) |
| @echo "generating srec: ${SREC_PATH}/bl2.srec" |
| $(Q)$(OC) -O srec --srec-forceS3 ${BL2_ELF_SRC} ${SREC_PATH}/bl2.srec |
| @echo "generating srec: ${SREC_PATH}/bl31.srec" |
| $(Q)$(OC) -O srec --srec-forceS3 ${BL31_ELF_SRC} ${SREC_PATH}/bl31.srec |
| |