blob: 2218b2aaf93ba17d67f1321a9dabe1b815a8a648 [file] [log] [blame]
/*
* Copyright (c) 2020, Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
/dts-v1/;
#include "morello.dtsi"
/ {
chosen {
stdout-path = "soc_uart0:115200n8";
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
secure-firmware@ff000000 {
reg = <0 0xff000000 0 0x01000000>;
no-map;
};
};
cpus {
#address-cells = <2>;
#size-cells = <0>;
cpu0@0 {
compatible = "arm,armv8";
reg = <0x0 0x0>;
device_type = "cpu";
enable-method = "psci";
clocks = <&scmi_dvfs 0>;
};
cpu1@100 {
compatible = "arm,armv8";
reg = <0x0 0x100>;
device_type = "cpu";
enable-method = "psci";
clocks = <&scmi_dvfs 0>;
};
cpu2@10000 {
compatible = "arm,armv8";
reg = <0x0 0x10000>;
device_type = "cpu";
enable-method = "psci";
clocks = <&scmi_dvfs 0>;
};
cpu3@10100 {
compatible = "arm,armv8";
reg = <0x0 0x10100>;
device_type = "cpu";
enable-method = "psci";
clocks = <&scmi_dvfs 0>;
};
};
/* The first bank of memory, memory map is actually provided by UEFI. */
memory@80000000 {
#address-cells = <2>;
#size-cells = <2>;
device_type = "memory";
/* [0x80000000-0xffffffff] */
reg = <0x00000000 0x80000000 0x0 0x80000000>;
};
memory@8080000000 {
#address-cells = <2>;
#size-cells = <2>;
device_type = "memory";
/* [0x8080000000-0x83ffffffff] */
reg = <0x00000080 0x80000000 0x1 0x80000000>;
};
virtio_block@1c170000 {
compatible = "virtio,mmio";
reg = <0x0 0x1c170000 0x0 0x200>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
};
virtio_rng@1c190000 {
compatible = "virtio,mmio","virtio-rng";
reg = <0x0 0x1c190000 0x0 0x200>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
};
ethernet@1d100000 {
compatible = "smsc,lan91c111";
reg = <0x0 0x1d100000 0x0 0x10000>;
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
};
kmi@1c150000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x0 0x1c150000 0x0 0x1000>;
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bp_clock24mhz>, <&bp_clock24mhz>;
clock-names = "KMIREFCLK", "apb_pclk";
};
kmi@1c160000 {
compatible = "arm,pl050", "arm,primecell";
reg = <0x0 0x1c160000 0x0 0x1000>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&bp_clock24mhz>, <&bp_clock24mhz>;
clock-names = "KMIREFCLK", "apb_pclk";
};
firmware {
scmi {
compatible = "arm,scmi";
mbox-names = "tx", "rx";
mboxes = <&mailbox 1 0 &mailbox 1 1>;
shmem = <&cpu_scp_hpri0 &cpu_scp_hpri1>;
#address-cells = <1>;
#size-cells = <0>;
scmi_dvfs: protocol@13 {
reg = <0x13>;
#clock-cells = <1>;
};
};
};
bp_clock24mhz: clock24mhz {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
clock-output-names = "bp:clock24mhz";
};
};
&gic {
reg = <0x0 0x30000000 0 0x10000>, /* GICD */
<0x0 0x300c0000 0 0x80000>; /* GICR */
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};