blob: a088c2e03c24354cf4f9f17723aef1be10ef267c [file] [log] [blame]
/*
* Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* Neither the name of ARM nor the names of its contributors may be used
* to endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <arch.h>
#include <asm_macros.S>
#include <bl_common.h>
.globl bl31_entrypoint
/* -----------------------------------------------------
* bl31_entrypoint() is the cold boot entrypoint,
* executed only by the primary cpu.
* -----------------------------------------------------
*/
func bl31_entrypoint
/* ---------------------------------------------------------------
* Preceding bootloader has populated x0 with a pointer to a
* 'bl31_params' structure & x1 with a pointer to platform
* specific structure
* ---------------------------------------------------------------
*/
#if !RESET_TO_BL31
mov x20, x0
mov x21, x1
#else
/* ---------------------------------------------
* Set the CPU endianness before doing anything
* that might involve memory reads or writes.
* ---------------------------------------------
*/
mrs x0, sctlr_el3
bic x0, x0, #SCTLR_EE_BIT
msr sctlr_el3, x0
isb
/* -----------------------------------------------------
* Perform any processor specific actions upon reset
* e.g. cache, tlb invalidations etc. Override the
* Boot ROM(BL0) programming sequence
* -----------------------------------------------------
*/
bl cpu_reset_handler
#endif
/* ---------------------------------------------
* Enable the instruction cache, stack pointer
* and data access alignment checks
* ---------------------------------------------
*/
mov x1, #(SCTLR_I_BIT | SCTLR_A_BIT | SCTLR_SA_BIT)
mrs x0, sctlr_el3
orr x0, x0, x1
msr sctlr_el3, x0
isb
/* ---------------------------------------------
* Initialise cpu_data early to enable crash
* reporting to have access to crash stack.
* Since crash reporting depends on cpu_data to
* report the unhandled exception, not
* doing so can lead to recursive exceptions due
* to a NULL TPIDR_EL3
* ---------------------------------------------
*/
bl init_cpu_data_ptr
/* ---------------------------------------------
* Set the exception vector.
* ---------------------------------------------
*/
adr x1, runtime_exceptions
msr vbar_el3, x1
isb
/* ---------------------------------------------
* Enable the SError interrupt now that the
* exception vectors have been setup.
* ---------------------------------------------
*/
msr daifclr, #DAIF_ABT_BIT
/* ---------------------------------------------------------------------
* The initial state of the Architectural feature trap register
* (CPTR_EL3) is unknown and it must be set to a known state. All
* feature traps are disabled. Some bits in this register are marked as
* Reserved and should not be modified.
*
* CPTR_EL3.TCPAC: This causes a direct access to the CPACR_EL1 from EL1
* or the CPTR_EL2 from EL2 to trap to EL3 unless it is trapped at EL2.
* CPTR_EL3.TTA: This causes access to the Trace functionality to trap
* to EL3 when executed from EL0, EL1, EL2, or EL3. If system register
* access to trace functionality is not supported, this bit is RES0.
* CPTR_EL3.TFP: This causes instructions that access the registers
* associated with Floating Point and Advanced SIMD execution to trap
* to EL3 when executed from any exception level, unless trapped to EL1
* or EL2.
* ---------------------------------------------------------------------
*/
mrs x1, cptr_el3
bic w1, w1, #TCPAC_BIT
bic w1, w1, #TTA_BIT
bic w1, w1, #TFP_BIT
msr cptr_el3, x1
#if RESET_TO_BL31
/* -------------------------------------------------------
* Will not return from this macro if it is a warm boot.
* -------------------------------------------------------
*/
wait_for_entrypoint
bl platform_mem_init
#endif
/* ---------------------------------------------
* Zero out NOBITS sections. There are 2 of them:
* - the .bss section;
* - the coherent memory section.
* ---------------------------------------------
*/
ldr x0, =__BSS_START__
ldr x1, =__BSS_SIZE__
bl zeromem16
ldr x0, =__COHERENT_RAM_START__
ldr x1, =__COHERENT_RAM_UNALIGNED_SIZE__
bl zeromem16
/* ---------------------------------------------
* Use SP_EL0 for the C runtime stack.
* ---------------------------------------------
*/
msr spsel, #0
/* --------------------------------------------
* Allocate a stack whose memory will be marked
* as Normal-IS-WBWA when the MMU is enabled.
* There is no risk of reading stale stack
* memory after enabling the MMU as only the
* primary cpu is running at the moment.
* --------------------------------------------
*/
mrs x0, mpidr_el1
bl platform_set_stack
/* ---------------------------------------------
* Perform platform specific early arch. setup
* ---------------------------------------------
*/
#if RESET_TO_BL31
mov x0, 0
mov x1, 0
#else
mov x0, x20
mov x1, x21
#endif
bl bl31_early_platform_setup
bl bl31_plat_arch_setup
/* ---------------------------------------------
* Jump to main function.
* ---------------------------------------------
*/
bl bl31_main
b el3_exit
_panic:
wfi
b _panic