blob: 13b34b79fa94fe8d2b9946bcccede70082c51ff6 [file] [log] [blame]
/*
* Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* Neither the name of ARM nor the names of its contributors may be used
* to endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <arch.h>
#include <asm_macros.S>
#include <bl_common.h>
#include <runtime_svc.h>
.globl bl1_exceptions
.section .vectors, "ax"; .align 11
/* -----------------------------------------------------
* Very simple stackless exception handlers used by BL1.
* -----------------------------------------------------
*/
.align 7
bl1_exceptions:
/* -----------------------------------------------------
* Current EL with SP0 : 0x0 - 0x180
* -----------------------------------------------------
*/
SynchronousExceptionSP0:
mov x0, #SYNC_EXCEPTION_SP_EL0
bl plat_report_exception
b SynchronousExceptionSP0
check_vector_size SynchronousExceptionSP0
.align 7
IrqSP0:
mov x0, #IRQ_SP_EL0
bl plat_report_exception
b IrqSP0
check_vector_size IrqSP0
.align 7
FiqSP0:
mov x0, #FIQ_SP_EL0
bl plat_report_exception
b FiqSP0
check_vector_size FiqSP0
.align 7
SErrorSP0:
mov x0, #SERROR_SP_EL0
bl plat_report_exception
b SErrorSP0
check_vector_size SErrorSP0
/* -----------------------------------------------------
* Current EL with SPx: 0x200 - 0x380
* -----------------------------------------------------
*/
.align 7
SynchronousExceptionSPx:
mov x0, #SYNC_EXCEPTION_SP_ELX
bl plat_report_exception
b SynchronousExceptionSPx
check_vector_size SynchronousExceptionSPx
.align 7
IrqSPx:
mov x0, #IRQ_SP_ELX
bl plat_report_exception
b IrqSPx
check_vector_size IrqSPx
.align 7
FiqSPx:
mov x0, #FIQ_SP_ELX
bl plat_report_exception
b FiqSPx
check_vector_size FiqSPx
.align 7
SErrorSPx:
mov x0, #SERROR_SP_ELX
bl plat_report_exception
b SErrorSPx
check_vector_size SErrorSPx
/* -----------------------------------------------------
* Lower EL using AArch64 : 0x400 - 0x580
* -----------------------------------------------------
*/
.align 7
SynchronousExceptionA64:
/* Enable the SError interrupt */
msr daifclr, #DAIF_ABT_BIT
/* ------------------------------------------------
* Only a single SMC exception from BL2 to ask
* BL1 to pass EL3 control to BL31 is expected
* here.
* It expects X0 with RUN_IMAGE SMC function id
* X1 with address of a entry_point_info_t structure
* describing the BL3-1 entrypoint
* ------------------------------------------------
*/
mov x19, x0
mov x20, x1
mrs x0, esr_el3
ubfx x1, x0, #ESR_EC_SHIFT, #ESR_EC_LENGTH
cmp x1, #EC_AARCH64_SMC
b.ne panic
mov x0, #RUN_IMAGE
cmp x19, x0
b.ne panic
mov x0, x20
bl display_boot_progress
ldp x0, x1, [x20, #ENTRY_POINT_INFO_PC_OFFSET]
msr elr_el3, x0
msr spsr_el3, x1
ubfx x0, x1, #MODE_EL_SHIFT, #2
cmp x0, #MODE_EL3
b.ne panic
bl disable_mmu_icache_el3
tlbi alle3
ldp x6, x7, [x20, #(ENTRY_POINT_INFO_ARGS_OFFSET + 0x30)]
ldp x4, x5, [x20, #(ENTRY_POINT_INFO_ARGS_OFFSET + 0x20)]
ldp x2, x3, [x20, #(ENTRY_POINT_INFO_ARGS_OFFSET + 0x10)]
ldp x0, x1, [x20, #(ENTRY_POINT_INFO_ARGS_OFFSET + 0x0)]
eret
panic:
mov x0, #SYNC_EXCEPTION_AARCH64
bl plat_report_exception
wfi
b panic
check_vector_size SynchronousExceptionA64
.align 7
IrqA64:
mov x0, #IRQ_AARCH64
bl plat_report_exception
b IrqA64
check_vector_size IrqA64
.align 7
FiqA64:
mov x0, #FIQ_AARCH64
bl plat_report_exception
b FiqA64
check_vector_size FiqA64
.align 7
SErrorA64:
mov x0, #SERROR_AARCH64
bl plat_report_exception
b SErrorA64
check_vector_size SErrorA64
/* -----------------------------------------------------
* Lower EL using AArch32 : 0x0 - 0x180
* -----------------------------------------------------
*/
.align 7
SynchronousExceptionA32:
mov x0, #SYNC_EXCEPTION_AARCH32
bl plat_report_exception
b SynchronousExceptionA32
check_vector_size SynchronousExceptionA32
.align 7
IrqA32:
mov x0, #IRQ_AARCH32
bl plat_report_exception
b IrqA32
check_vector_size IrqA32
.align 7
FiqA32:
mov x0, #FIQ_AARCH32
bl plat_report_exception
b FiqA32
check_vector_size FiqA32
.align 7
SErrorA32:
mov x0, #SERROR_AARCH32
bl plat_report_exception
b SErrorA32
check_vector_size SErrorA32