| /* |
| * Copyright (c) 2015-2016, ARM Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <arch_helpers.h> |
| #include <assert.h> |
| #include <bl31.h> |
| #include <bl_common.h> |
| #include <console.h> |
| #include <context.h> |
| #include <context_mgmt.h> |
| #include <cortex_a57.h> |
| #include <debug.h> |
| #include <denver.h> |
| #include <interrupt_mgmt.h> |
| #include <mce.h> |
| #include <platform.h> |
| #include <tegra_def.h> |
| #include <tegra_platform.h> |
| #include <tegra_private.h> |
| #include <xlat_tables_v2.h> |
| |
| DEFINE_RENAME_SYSREG_RW_FUNCS(l2ctlr_el1, CORTEX_A57_L2CTLR_EL1) |
| extern uint64_t tegra_enable_l2_ecc_parity_prot; |
| |
| /******************************************************************************* |
| * Tegra186 CPU numbers in cluster #0 |
| ******************************************************************************* |
| */ |
| #define TEGRA186_CLUSTER0_CORE2 2 |
| #define TEGRA186_CLUSTER0_CORE3 3 |
| |
| /******************************************************************************* |
| * The Tegra power domain tree has a single system level power domain i.e. a |
| * single root node. The first entry in the power domain descriptor specifies |
| * the number of power domains at the highest power level. |
| ******************************************************************************* |
| */ |
| const unsigned char tegra_power_domain_tree_desc[] = { |
| /* No of root nodes */ |
| 1, |
| /* No of clusters */ |
| PLATFORM_CLUSTER_COUNT, |
| /* No of CPU cores - cluster0 */ |
| PLATFORM_MAX_CPUS_PER_CLUSTER, |
| /* No of CPU cores - cluster1 */ |
| PLATFORM_MAX_CPUS_PER_CLUSTER |
| }; |
| |
| /* |
| * Table of regions to map using the MMU. |
| */ |
| static const mmap_region_t tegra_mmap[] = { |
| MAP_REGION_FLAT(TEGRA_MISC_BASE, 0x10000, /* 64KB */ |
| MT_DEVICE | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(TEGRA_TSA_BASE, 0x20000, /* 128KB */ |
| MT_DEVICE | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(TEGRA_MC_STREAMID_BASE, 0x10000, /* 64KB */ |
| MT_DEVICE | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(TEGRA_MC_BASE, 0x10000, /* 64KB */ |
| MT_DEVICE | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(TEGRA_UARTA_BASE, 0x20000, /* 128KB - UART A, B*/ |
| MT_DEVICE | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(TEGRA_UARTC_BASE, 0x20000, /* 128KB - UART C, G */ |
| MT_DEVICE | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(TEGRA_UARTD_BASE, 0x30000, /* 192KB - UART D, E, F */ |
| MT_DEVICE | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(TEGRA_FUSE_BASE, 0x10000, /* 64KB */ |
| MT_DEVICE | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(TEGRA_GICD_BASE, 0x20000, /* 128KB */ |
| MT_DEVICE | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(TEGRA_SE0_BASE, 0x10000, /* 64KB */ |
| MT_DEVICE | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(TEGRA_PKA1_BASE, 0x10000, /* 64KB */ |
| MT_DEVICE | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(TEGRA_RNG1_BASE, 0x10000, /* 64KB */ |
| MT_DEVICE | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(TEGRA_CAR_RESET_BASE, 0x10000, /* 64KB */ |
| MT_DEVICE | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(TEGRA_PMC_BASE, 0x40000, /* 256KB */ |
| MT_DEVICE | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(TEGRA_SCRATCH_BASE, 0x10000, /* 64KB */ |
| MT_DEVICE | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(TEGRA_MMCRAB_BASE, 0x60000, /* 384KB */ |
| MT_DEVICE | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(TEGRA_ARM_ACTMON_CTR_BASE, 0x20000, /* 128KB - ARM/Denver */ |
| MT_DEVICE | MT_RW | MT_SECURE), |
| MAP_REGION_FLAT(TEGRA_SMMU0_BASE, 0x1000000, /* 64KB */ |
| MT_DEVICE | MT_RW | MT_SECURE), |
| {0} |
| }; |
| |
| /******************************************************************************* |
| * Set up the pagetables as per the platform memory map & initialize the MMU |
| ******************************************************************************/ |
| const mmap_region_t *plat_get_mmio_map(void) |
| { |
| /* MMIO space */ |
| return tegra_mmap; |
| } |
| |
| /******************************************************************************* |
| * Handler to get the System Counter Frequency |
| ******************************************************************************/ |
| unsigned int plat_get_syscnt_freq2(void) |
| { |
| return 31250000; |
| } |
| |
| /******************************************************************************* |
| * Maximum supported UART controllers |
| ******************************************************************************/ |
| #define TEGRA186_MAX_UART_PORTS 7 |
| |
| /******************************************************************************* |
| * This variable holds the UART port base addresses |
| ******************************************************************************/ |
| static uint32_t tegra186_uart_addresses[TEGRA186_MAX_UART_PORTS + 1] = { |
| 0, /* undefined - treated as an error case */ |
| TEGRA_UARTA_BASE, |
| TEGRA_UARTB_BASE, |
| TEGRA_UARTC_BASE, |
| TEGRA_UARTD_BASE, |
| TEGRA_UARTE_BASE, |
| TEGRA_UARTF_BASE, |
| TEGRA_UARTG_BASE, |
| }; |
| |
| /******************************************************************************* |
| * Retrieve the UART controller base to be used as the console |
| ******************************************************************************/ |
| uint32_t plat_get_console_from_id(int id) |
| { |
| if (id > TEGRA186_MAX_UART_PORTS) |
| return 0; |
| |
| return tegra186_uart_addresses[id]; |
| } |
| |
| /* represent chip-version as concatenation of major (15:12), minor (11:8) and subrev (7:0) */ |
| #define TEGRA186_VER_A02P 0x1201 |
| |
| /******************************************************************************* |
| * Handler for early platform setup |
| ******************************************************************************/ |
| void plat_early_platform_setup(void) |
| { |
| int impl = (read_midr() >> MIDR_IMPL_SHIFT) & MIDR_IMPL_MASK; |
| uint32_t chip_subrev, val; |
| |
| /* sanity check MCE firmware compatibility */ |
| mce_verify_firmware_version(); |
| |
| /* |
| * Enable ECC and Parity Protection for Cortex-A57 CPUs |
| * for Tegra A02p SKUs |
| */ |
| if (impl != DENVER_IMPL) { |
| |
| /* get the major, minor and sub-version values */ |
| chip_subrev = mmio_read_32(TEGRA_FUSE_BASE + OPT_SUBREVISION) & |
| SUBREVISION_MASK; |
| |
| /* prepare chip version number */ |
| val = (tegra_get_chipid_major() << 12) | |
| (tegra_get_chipid_minor() << 8) | |
| chip_subrev; |
| |
| /* enable L2 ECC for Tegra186 A02P and beyond */ |
| if (val >= TEGRA186_VER_A02P) { |
| |
| val = read_l2ctlr_el1(); |
| val |= CORTEX_A57_L2_ECC_PARITY_PROTECTION_BIT; |
| write_l2ctlr_el1(val); |
| |
| /* |
| * Set the flag to enable ECC/Parity Protection |
| * when we exit System Suspend or Cluster Powerdn |
| */ |
| tegra_enable_l2_ecc_parity_prot = 1; |
| } |
| } |
| } |
| |
| /* Secure IRQs for Tegra186 */ |
| static const irq_sec_cfg_t tegra186_sec_irqs[] = { |
| { |
| TEGRA186_TOP_WDT_IRQ, |
| TEGRA186_SEC_IRQ_TARGET_MASK, |
| INTR_TYPE_EL3, |
| }, |
| { |
| TEGRA186_AON_WDT_IRQ, |
| TEGRA186_SEC_IRQ_TARGET_MASK, |
| INTR_TYPE_EL3, |
| }, |
| }; |
| |
| /******************************************************************************* |
| * Initialize the GIC and SGIs |
| ******************************************************************************/ |
| void plat_gic_setup(void) |
| { |
| tegra_gic_setup(tegra186_sec_irqs, |
| sizeof(tegra186_sec_irqs) / sizeof(tegra186_sec_irqs[0])); |
| |
| /* |
| * Initialize the FIQ handler only if the platform supports any |
| * FIQ interrupt sources. |
| */ |
| if (sizeof(tegra186_sec_irqs) > 0) |
| tegra_fiq_handler_setup(); |
| } |
| |
| /******************************************************************************* |
| * Return pointer to the BL31 params from previous bootloader |
| ******************************************************************************/ |
| bl31_params_t *plat_get_bl31_params(void) |
| { |
| uint32_t val; |
| |
| val = mmio_read_32(TEGRA_SCRATCH_BASE + SECURE_SCRATCH_RSV53_LO); |
| |
| return (bl31_params_t *)(uintptr_t)val; |
| } |
| |
| /******************************************************************************* |
| * Return pointer to the BL31 platform params from previous bootloader |
| ******************************************************************************/ |
| plat_params_from_bl2_t *plat_get_bl31_plat_params(void) |
| { |
| uint32_t val; |
| |
| val = mmio_read_32(TEGRA_SCRATCH_BASE + SECURE_SCRATCH_RSV53_HI); |
| |
| return (plat_params_from_bl2_t *)(uintptr_t)val; |
| } |
| |
| /******************************************************************************* |
| * This function implements a part of the critical interface between the psci |
| * generic layer and the platform that allows the former to query the platform |
| * to convert an MPIDR to a unique linear index. An error code (-1) is returned |
| * in case the MPIDR is invalid. |
| ******************************************************************************/ |
| int plat_core_pos_by_mpidr(u_register_t mpidr) |
| { |
| unsigned int cluster_id, cpu_id, pos; |
| |
| cluster_id = (mpidr >> MPIDR_AFF1_SHIFT) & MPIDR_AFFLVL_MASK; |
| cpu_id = (mpidr >> MPIDR_AFF0_SHIFT) & MPIDR_AFFLVL_MASK; |
| |
| /* |
| * Validate cluster_id by checking whether it represents |
| * one of the two clusters present on the platform. |
| */ |
| if (cluster_id >= PLATFORM_CLUSTER_COUNT) |
| return PSCI_E_NOT_PRESENT; |
| |
| /* |
| * Validate cpu_id by checking whether it represents a CPU in |
| * one of the two clusters present on the platform. |
| */ |
| if (cpu_id >= PLATFORM_MAX_CPUS_PER_CLUSTER) |
| return PSCI_E_NOT_PRESENT; |
| |
| /* calculate the core position */ |
| pos = cpu_id + (cluster_id << 2); |
| |
| /* check for non-existent CPUs */ |
| if (pos == TEGRA186_CLUSTER0_CORE2 || pos == TEGRA186_CLUSTER0_CORE3) |
| return PSCI_E_NOT_PRESENT; |
| |
| return pos; |
| } |