blob: beba804e37255b71824442c98c5ba769e061a117 [file] [log] [blame]
/*
* Copyright (c) 2013-2014, ARM Limited and Contributors. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* Neither the name of ARM nor the names of its contributors may be used
* to endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <arch_helpers.h>
#include <assert.h>
#include <bl_common.h>
#include <console.h>
#include <platform.h>
#include <platform_def.h>
#include <string.h>
#include "fvp_def.h"
#include "fvp_private.h"
/*******************************************************************************
* Declarations of linker defined symbols which will help us find the layout
* of trusted SRAM
******************************************************************************/
extern unsigned long __RO_START__;
extern unsigned long __RO_END__;
extern unsigned long __COHERENT_RAM_START__;
extern unsigned long __COHERENT_RAM_END__;
/*
* The next 2 constants identify the extents of the code & RO data region.
* These addresses are used by the MMU setup code and therefore they must be
* page-aligned. It is the responsibility of the linker script to ensure that
* __RO_START__ and __RO_END__ linker symbols refer to page-aligned addresses.
*/
#define BL2_RO_BASE (unsigned long)(&__RO_START__)
#define BL2_RO_LIMIT (unsigned long)(&__RO_END__)
/*
* The next 2 constants identify the extents of the coherent memory region.
* These addresses are used by the MMU setup code and therefore they must be
* page-aligned. It is the responsibility of the linker script to ensure that
* __COHERENT_RAM_START__ and __COHERENT_RAM_END__ linker symbols refer to
* page-aligned addresses.
*/
#define BL2_COHERENT_RAM_BASE (unsigned long)(&__COHERENT_RAM_START__)
#define BL2_COHERENT_RAM_LIMIT (unsigned long)(&__COHERENT_RAM_END__)
/* Data structure which holds the extents of the trusted SRAM for BL2 */
static meminfo_t bl2_tzram_layout
__attribute__ ((aligned(PLATFORM_CACHE_LINE_SIZE),
section("tzfw_coherent_mem")));
/*******************************************************************************
* Reference to structures which holds the arguments which need to be passed
* to BL31
******************************************************************************/
static bl31_params_t *bl2_to_bl31_params;
static entry_point_info_t *bl31_ep_info;
meminfo_t *bl2_plat_sec_mem_layout(void)
{
return &bl2_tzram_layout;
}
/*******************************************************************************
* This function assigns a pointer to the memory that the platform has kept
* aside to pass platform specific and trusted firmware related information
* to BL31. This memory is allocated by allocating memory to
* bl2_to_bl31_params_mem_t structure which is a superset of all the
* structure whose information is passed to BL31
* NOTE: This function should be called only once and should be done
* before generating params to BL31
******************************************************************************/
bl31_params_t *bl2_plat_get_bl31_params(void)
{
bl2_to_bl31_params_mem_t *bl31_params_mem;
#if TSP_RAM_LOCATION_ID == TSP_IN_TZDRAM
/*
* Ensure that the secure DRAM memory used for passing BL31 arguments
* does not overlap with the BL32_BASE.
*/
assert(BL32_BASE > PARAMS_BASE + sizeof(bl2_to_bl31_params_mem_t));
#endif
/*
* Allocate the memory for all the arguments that needs to
* be passed to BL31
*/
bl31_params_mem = (bl2_to_bl31_params_mem_t *)PARAMS_BASE;
memset((void *)PARAMS_BASE, 0, sizeof(bl2_to_bl31_params_mem_t));
/* Assign memory for TF related information */
bl2_to_bl31_params = &bl31_params_mem->bl31_params;
SET_PARAM_HEAD(bl2_to_bl31_params, PARAM_BL31, VERSION_1, 0);
/* Fill BL31 related information */
bl31_ep_info = &bl31_params_mem->bl31_ep_info;
bl2_to_bl31_params->bl31_image_info = &bl31_params_mem->bl31_image_info;
SET_PARAM_HEAD(bl2_to_bl31_params->bl31_image_info, PARAM_IMAGE_BINARY,
VERSION_1, 0);
/* Fill BL32 related information if it exists */
if (BL32_BASE) {
bl2_to_bl31_params->bl32_ep_info =
&bl31_params_mem->bl32_ep_info;
SET_PARAM_HEAD(bl2_to_bl31_params->bl32_ep_info,
PARAM_EP, VERSION_1, 0);
bl2_to_bl31_params->bl32_image_info =
&bl31_params_mem->bl32_image_info;
SET_PARAM_HEAD(bl2_to_bl31_params->bl32_image_info,
PARAM_IMAGE_BINARY,
VERSION_1, 0);
}
/* Fill BL33 related information */
bl2_to_bl31_params->bl33_ep_info = &bl31_params_mem->bl33_ep_info;
SET_PARAM_HEAD(bl2_to_bl31_params->bl33_ep_info,
PARAM_EP, VERSION_1, 0);
bl2_to_bl31_params->bl33_image_info = &bl31_params_mem->bl33_image_info;
SET_PARAM_HEAD(bl2_to_bl31_params->bl33_image_info, PARAM_IMAGE_BINARY,
VERSION_1, 0);
return bl2_to_bl31_params;
}
/*******************************************************************************
* This function returns a pointer to the shared memory that the platform
* has kept to point to entry point information of BL31 to BL2
******************************************************************************/
struct entry_point_info *bl2_plat_get_bl31_ep_info(void)
{
#if DEBUG
bl31_ep_info->args.arg1 = FVP_BL31_PLAT_PARAM_VAL;
#endif
return bl31_ep_info;
}
/*******************************************************************************
* BL1 has passed the extents of the trusted SRAM that should be visible to BL2
* in x0. This memory layout is sitting at the base of the free trusted SRAM.
* Copy it to a safe loaction before its reclaimed by later BL2 functionality.
******************************************************************************/
void bl2_early_platform_setup(meminfo_t *mem_layout)
{
/* Initialize the console to provide early debug support */
console_init(PL011_UART0_BASE);
/* Setup the BL2 memory layout */
bl2_tzram_layout = *mem_layout;
/* Initialize the platform config for future decision making */
fvp_config_setup();
}
/*******************************************************************************
* Perform platform specific setup. For now just initialize the memory location
* to use for passing arguments to BL31.
******************************************************************************/
void bl2_platform_setup(void)
{
/*
* Do initial security configuration to allow DRAM/device access. On
* Base FVP only DRAM security is programmable (via TrustZone), but
* other platforms might have more programmable security devices
* present.
*/
fvp_security_setup();
/* Initialise the IO layer and register platform IO devices */
fvp_io_setup();
}
/* Flush the TF params and the TF plat params */
void bl2_plat_flush_bl31_params(void)
{
flush_dcache_range((unsigned long)PARAMS_BASE, \
sizeof(bl2_to_bl31_params_mem_t));
}
/*******************************************************************************
* Perform the very early platform specific architectural setup here. At the
* moment this is only intializes the mmu in a quick and dirty way.
******************************************************************************/
void bl2_plat_arch_setup(void)
{
fvp_configure_mmu_el1(bl2_tzram_layout.total_base,
bl2_tzram_layout.total_size,
BL2_RO_BASE,
BL2_RO_LIMIT,
BL2_COHERENT_RAM_BASE,
BL2_COHERENT_RAM_LIMIT);
}
/*******************************************************************************
* Before calling this function BL31 is loaded in memory and its entrypoint
* is set by load_image. This is a placeholder for the platform to change
* the entrypoint of BL31 and set SPSR and security state.
* On FVP we are only setting the security state, entrypoint
******************************************************************************/
void bl2_plat_set_bl31_ep_info(image_info_t *bl31_image_info,
entry_point_info_t *bl31_ep_info)
{
SET_SECURITY_STATE(bl31_ep_info->h.attr, SECURE);
bl31_ep_info->spsr = SPSR_64(MODE_EL3, MODE_SP_ELX,
DISABLE_ALL_EXCEPTIONS);
}
/*******************************************************************************
* Before calling this function BL32 is loaded in memory and its entrypoint
* is set by load_image. This is a placeholder for the platform to change
* the entrypoint of BL32 and set SPSR and security state.
* On FVP we are only setting the security state, entrypoint
******************************************************************************/
void bl2_plat_set_bl32_ep_info(image_info_t *bl32_image_info,
entry_point_info_t *bl32_ep_info)
{
SET_SECURITY_STATE(bl32_ep_info->h.attr, SECURE);
bl32_ep_info->spsr = fvp_get_spsr_for_bl32_entry();
}
/*******************************************************************************
* Before calling this function BL33 is loaded in memory and its entrypoint
* is set by load_image. This is a placeholder for the platform to change
* the entrypoint of BL33 and set SPSR and security state.
* On FVP we are only setting the security state, entrypoint
******************************************************************************/
void bl2_plat_set_bl33_ep_info(image_info_t *image,
entry_point_info_t *bl33_ep_info)
{
SET_SECURITY_STATE(bl33_ep_info->h.attr, NON_SECURE);
bl33_ep_info->spsr = fvp_get_spsr_for_bl33_entry();
}
/*******************************************************************************
* Populate the extents of memory available for loading BL32
******************************************************************************/
void bl2_plat_get_bl32_meminfo(meminfo_t *bl32_meminfo)
{
/*
* Populate the extents of memory available for loading BL32.
*/
bl32_meminfo->total_base = BL32_BASE;
bl32_meminfo->free_base = BL32_BASE;
bl32_meminfo->total_size =
(TSP_SEC_MEM_BASE + TSP_SEC_MEM_SIZE) - BL32_BASE;
bl32_meminfo->free_size =
(TSP_SEC_MEM_BASE + TSP_SEC_MEM_SIZE) - BL32_BASE;
}
/*******************************************************************************
* Populate the extents of memory available for loading BL33
******************************************************************************/
void bl2_plat_get_bl33_meminfo(meminfo_t *bl33_meminfo)
{
bl33_meminfo->total_base = DRAM_BASE;
bl33_meminfo->total_size = DRAM_SIZE - DRAM1_SEC_SIZE;
bl33_meminfo->free_base = DRAM_BASE;
bl33_meminfo->free_size = DRAM_SIZE - DRAM1_SEC_SIZE;
}