blob: 5089420d0cf017ce3b9a2610d86d16dd6c57e7b6 [file] [log] [blame]
/*
* Copyright (c) 2013-2015, ARM Limited and Contributors. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* Neither the name of ARM nor the names of its contributors may be used
* to endorse or promote products derived from this software without specific
* prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <arch_helpers.h>
#include <assert.h>
#include <bl_common.h>
#include <context_mgmt.h>
#include <debug.h>
#include <platform.h>
#include <tsp.h>
#include "tspd_private.h"
/*******************************************************************************
* The target cpu is being turned on. Allow the TSPD/TSP to perform any actions
* needed. Nothing at the moment.
******************************************************************************/
static void tspd_cpu_on_handler(uint64_t target_cpu)
{
}
/*******************************************************************************
* This cpu is being turned off. Allow the TSPD/TSP to perform any actions
* needed
******************************************************************************/
static int32_t tspd_cpu_off_handler(uint64_t unused)
{
int32_t rc = 0;
uint32_t linear_id = plat_my_core_pos();
tsp_context_t *tsp_ctx = &tspd_sp_context[linear_id];
assert(tsp_vectors);
assert(get_tsp_pstate(tsp_ctx->state) == TSP_PSTATE_ON);
/* Program the entry point and enter the TSP */
cm_set_elr_el3(SECURE, (uint64_t) &tsp_vectors->cpu_off_entry);
rc = tspd_synchronous_sp_entry(tsp_ctx);
/*
* Read the response from the TSP. A non-zero return means that
* something went wrong while communicating with the TSP.
*/
if (rc != 0)
panic();
/*
* Reset TSP's context for a fresh start when this cpu is turned on
* subsequently.
*/
set_tsp_pstate(tsp_ctx->state, TSP_PSTATE_OFF);
return 0;
}
/*******************************************************************************
* This cpu is being suspended. S-EL1 state must have been saved in the
* resident cpu (mpidr format) if it is a UP/UP migratable TSP.
******************************************************************************/
static void tspd_cpu_suspend_handler(uint64_t max_off_pwrlvl)
{
int32_t rc = 0;
uint32_t linear_id = plat_my_core_pos();
tsp_context_t *tsp_ctx = &tspd_sp_context[linear_id];
assert(tsp_vectors);
assert(get_tsp_pstate(tsp_ctx->state) == TSP_PSTATE_ON);
/* Program the entry point and enter the TSP */
cm_set_elr_el3(SECURE, (uint64_t) &tsp_vectors->cpu_suspend_entry);
rc = tspd_synchronous_sp_entry(tsp_ctx);
/*
* Read the response from the TSP. A non-zero return means that
* something went wrong while communicating with the TSP.
*/
if (rc != 0)
panic();
/* Update its context to reflect the state the TSP is in */
set_tsp_pstate(tsp_ctx->state, TSP_PSTATE_SUSPEND);
}
/*******************************************************************************
* This cpu has been turned on. Enter the TSP to initialise S-EL1 and other bits
* before passing control back to the Secure Monitor. Entry in S-El1 is done
* after initialising minimal architectural state that guarantees safe
* execution.
******************************************************************************/
static void tspd_cpu_on_finish_handler(uint64_t unused)
{
int32_t rc = 0;
uint32_t linear_id = plat_my_core_pos();
tsp_context_t *tsp_ctx = &tspd_sp_context[linear_id];
entry_point_info_t tsp_on_entrypoint;
assert(tsp_vectors);
assert(get_tsp_pstate(tsp_ctx->state) == TSP_PSTATE_OFF);
tspd_init_tsp_ep_state(&tsp_on_entrypoint,
TSP_AARCH64,
(uint64_t) &tsp_vectors->cpu_on_entry,
tsp_ctx);
/* Initialise this cpu's secure context */
cm_init_my_context(&tsp_on_entrypoint);
#if TSPD_ROUTE_IRQ_TO_EL3
/*
* Disable the NS interrupt locally since it will be enabled globally
* within cm_init_my_context.
*/
disable_intr_rm_local(INTR_TYPE_NS, SECURE);
#endif
/* Enter the TSP */
rc = tspd_synchronous_sp_entry(tsp_ctx);
/*
* Read the response from the TSP. A non-zero return means that
* something went wrong while communicating with the SP.
*/
if (rc != 0)
panic();
/* Update its context to reflect the state the SP is in */
set_tsp_pstate(tsp_ctx->state, TSP_PSTATE_ON);
}
/*******************************************************************************
* This cpu has resumed from suspend. The SPD saved the TSP context when it
* completed the preceding suspend call. Use that context to program an entry
* into the TSP to allow it to do any remaining book keeping
******************************************************************************/
static void tspd_cpu_suspend_finish_handler(uint64_t max_off_pwrlvl)
{
int32_t rc = 0;
uint32_t linear_id = plat_my_core_pos();
tsp_context_t *tsp_ctx = &tspd_sp_context[linear_id];
assert(tsp_vectors);
assert(get_tsp_pstate(tsp_ctx->state) == TSP_PSTATE_SUSPEND);
/* Program the entry point, max_off_pwrlvl and enter the SP */
write_ctx_reg(get_gpregs_ctx(&tsp_ctx->cpu_ctx),
CTX_GPREG_X0,
max_off_pwrlvl);
cm_set_elr_el3(SECURE, (uint64_t) &tsp_vectors->cpu_resume_entry);
rc = tspd_synchronous_sp_entry(tsp_ctx);
/*
* Read the response from the TSP. A non-zero return means that
* something went wrong while communicating with the TSP.
*/
if (rc != 0)
panic();
/* Update its context to reflect the state the SP is in */
set_tsp_pstate(tsp_ctx->state, TSP_PSTATE_ON);
}
/*******************************************************************************
* Return the type of TSP the TSPD is dealing with. Report the current resident
* cpu (mpidr format) if it is a UP/UP migratable TSP.
******************************************************************************/
static int32_t tspd_cpu_migrate_info(uint64_t *resident_cpu)
{
return TSP_MIGRATE_INFO;
}
/*******************************************************************************
* System is about to be switched off. Allow the TSPD/TSP to perform
* any actions needed.
******************************************************************************/
static void tspd_system_off(void)
{
uint32_t linear_id = plat_my_core_pos();
tsp_context_t *tsp_ctx = &tspd_sp_context[linear_id];
assert(tsp_vectors);
assert(get_tsp_pstate(tsp_ctx->state) == TSP_PSTATE_ON);
/* Program the entry point */
cm_set_elr_el3(SECURE, (uint64_t) &tsp_vectors->system_off_entry);
/* Enter the TSP. We do not care about the return value because we
* must continue the shutdown anyway */
tspd_synchronous_sp_entry(tsp_ctx);
}
/*******************************************************************************
* System is about to be reset. Allow the TSPD/TSP to perform
* any actions needed.
******************************************************************************/
static void tspd_system_reset(void)
{
uint32_t linear_id = plat_my_core_pos();
tsp_context_t *tsp_ctx = &tspd_sp_context[linear_id];
assert(tsp_vectors);
assert(get_tsp_pstate(tsp_ctx->state) == TSP_PSTATE_ON);
/* Program the entry point */
cm_set_elr_el3(SECURE, (uint64_t) &tsp_vectors->system_reset_entry);
/* Enter the TSP. We do not care about the return value because we
* must continue the reset anyway */
tspd_synchronous_sp_entry(tsp_ctx);
}
/*******************************************************************************
* Structure populated by the TSP Dispatcher to be given a chance to perform any
* TSP bookkeeping before PSCI executes a power mgmt. operation.
******************************************************************************/
const spd_pm_ops_t tspd_pm = {
.svc_on = tspd_cpu_on_handler,
.svc_off = tspd_cpu_off_handler,
.svc_suspend = tspd_cpu_suspend_handler,
.svc_on_finish = tspd_cpu_on_finish_handler,
.svc_suspend_finish = tspd_cpu_suspend_finish_handler,
.svc_migrate = NULL,
.svc_migrate_info = tspd_cpu_migrate_info,
.svc_system_off = tspd_system_off,
.svc_system_reset = tspd_system_reset
};