| /* |
| * Copyright (c) 2017-2021, ARM Limited and Contributors. All rights reserved. |
| * |
| * SPDX-License-Identifier: BSD-3-Clause |
| */ |
| |
| #include <assert.h> |
| #include <string.h> |
| |
| #include <arch_helpers.h> |
| #include <arch_features.h> |
| #include <bl31/ehf.h> |
| #include <bl31/interrupt_mgmt.h> |
| #include <common/bl_common.h> |
| #include <common/debug.h> |
| #include <common/runtime_svc.h> |
| #include <lib/cassert.h> |
| #include <services/sdei.h> |
| |
| #include "sdei_private.h" |
| |
| /* x0-x17 GPREGS context */ |
| #define SDEI_SAVED_GPREGS 18U |
| |
| /* Maximum preemption nesting levels: Critical priority and Normal priority */ |
| #define MAX_EVENT_NESTING 2U |
| |
| /* Per-CPU SDEI state access macro */ |
| #define sdei_get_this_pe_state() (&cpu_state[plat_my_core_pos()]) |
| |
| /* Structure to store information about an outstanding dispatch */ |
| typedef struct sdei_dispatch_context { |
| sdei_ev_map_t *map; |
| uint64_t x[SDEI_SAVED_GPREGS]; |
| jmp_buf *dispatch_jmp; |
| |
| /* Exception state registers */ |
| uint64_t elr_el3; |
| uint64_t spsr_el3; |
| |
| #if DYNAMIC_WORKAROUND_CVE_2018_3639 |
| /* CVE-2018-3639 mitigation state */ |
| uint64_t disable_cve_2018_3639; |
| #endif |
| } sdei_dispatch_context_t; |
| |
| /* Per-CPU SDEI state data */ |
| typedef struct sdei_cpu_state { |
| sdei_dispatch_context_t dispatch_stack[MAX_EVENT_NESTING]; |
| unsigned short stack_top; /* Empty ascending */ |
| bool pe_masked; |
| bool pending_enables; |
| } sdei_cpu_state_t; |
| |
| /* SDEI states for all cores in the system */ |
| static sdei_cpu_state_t cpu_state[PLATFORM_CORE_COUNT]; |
| |
| int64_t sdei_pe_mask(void) |
| { |
| int64_t ret = 0; |
| sdei_cpu_state_t *state = sdei_get_this_pe_state(); |
| |
| /* |
| * Return value indicates whether this call had any effect in the mask |
| * status of this PE. |
| */ |
| if (!state->pe_masked) { |
| state->pe_masked = true; |
| ret = 1; |
| } |
| |
| return ret; |
| } |
| |
| void sdei_pe_unmask(void) |
| { |
| unsigned int i; |
| sdei_ev_map_t *map; |
| sdei_entry_t *se; |
| sdei_cpu_state_t *state = sdei_get_this_pe_state(); |
| uint64_t my_mpidr = read_mpidr_el1() & MPIDR_AFFINITY_MASK; |
| |
| /* |
| * If there are pending enables, iterate through the private mappings |
| * and enable those bound maps that are in enabled state. Also, iterate |
| * through shared mappings and enable interrupts of events that are |
| * targeted to this PE. |
| */ |
| if (state->pending_enables) { |
| for_each_private_map(i, map) { |
| se = get_event_entry(map); |
| if (is_map_bound(map) && GET_EV_STATE(se, ENABLED)) |
| plat_ic_enable_interrupt(map->intr); |
| } |
| |
| for_each_shared_map(i, map) { |
| se = get_event_entry(map); |
| |
| sdei_map_lock(map); |
| if (is_map_bound(map) && GET_EV_STATE(se, ENABLED) && |
| (se->reg_flags == SDEI_REGF_RM_PE) && |
| (se->affinity == my_mpidr)) { |
| plat_ic_enable_interrupt(map->intr); |
| } |
| sdei_map_unlock(map); |
| } |
| } |
| |
| state->pending_enables = false; |
| state->pe_masked = false; |
| } |
| |
| /* Push a dispatch context to the dispatch stack */ |
| static sdei_dispatch_context_t *push_dispatch(void) |
| { |
| sdei_cpu_state_t *state = sdei_get_this_pe_state(); |
| sdei_dispatch_context_t *disp_ctx; |
| |
| /* Cannot have more than max events */ |
| assert(state->stack_top < MAX_EVENT_NESTING); |
| |
| disp_ctx = &state->dispatch_stack[state->stack_top]; |
| state->stack_top++; |
| |
| return disp_ctx; |
| } |
| |
| /* Pop a dispatch context to the dispatch stack */ |
| static sdei_dispatch_context_t *pop_dispatch(void) |
| { |
| sdei_cpu_state_t *state = sdei_get_this_pe_state(); |
| |
| if (state->stack_top == 0U) |
| return NULL; |
| |
| assert(state->stack_top <= MAX_EVENT_NESTING); |
| |
| state->stack_top--; |
| |
| return &state->dispatch_stack[state->stack_top]; |
| } |
| |
| /* Retrieve the context at the top of dispatch stack */ |
| static sdei_dispatch_context_t *get_outstanding_dispatch(void) |
| { |
| sdei_cpu_state_t *state = sdei_get_this_pe_state(); |
| |
| if (state->stack_top == 0U) |
| return NULL; |
| |
| assert(state->stack_top <= MAX_EVENT_NESTING); |
| |
| return &state->dispatch_stack[state->stack_top - 1U]; |
| } |
| |
| static sdei_dispatch_context_t *save_event_ctx(sdei_ev_map_t *map, |
| void *tgt_ctx) |
| { |
| sdei_dispatch_context_t *disp_ctx; |
| const gp_regs_t *tgt_gpregs; |
| const el3_state_t *tgt_el3; |
| |
| assert(tgt_ctx != NULL); |
| tgt_gpregs = get_gpregs_ctx(tgt_ctx); |
| tgt_el3 = get_el3state_ctx(tgt_ctx); |
| |
| disp_ctx = push_dispatch(); |
| assert(disp_ctx != NULL); |
| disp_ctx->map = map; |
| |
| /* Save general purpose and exception registers */ |
| memcpy(disp_ctx->x, tgt_gpregs, sizeof(disp_ctx->x)); |
| disp_ctx->spsr_el3 = read_ctx_reg(tgt_el3, CTX_SPSR_EL3); |
| disp_ctx->elr_el3 = read_ctx_reg(tgt_el3, CTX_ELR_EL3); |
| |
| return disp_ctx; |
| } |
| |
| static void restore_event_ctx(const sdei_dispatch_context_t *disp_ctx, void *tgt_ctx) |
| { |
| gp_regs_t *tgt_gpregs; |
| el3_state_t *tgt_el3; |
| |
| assert(tgt_ctx != NULL); |
| tgt_gpregs = get_gpregs_ctx(tgt_ctx); |
| tgt_el3 = get_el3state_ctx(tgt_ctx); |
| |
| CASSERT(sizeof(disp_ctx->x) == (SDEI_SAVED_GPREGS * sizeof(uint64_t)), |
| foo); |
| |
| /* Restore general purpose and exception registers */ |
| memcpy(tgt_gpregs, disp_ctx->x, sizeof(disp_ctx->x)); |
| write_ctx_reg(tgt_el3, CTX_SPSR_EL3, disp_ctx->spsr_el3); |
| write_ctx_reg(tgt_el3, CTX_ELR_EL3, disp_ctx->elr_el3); |
| |
| #if DYNAMIC_WORKAROUND_CVE_2018_3639 |
| cve_2018_3639_t *tgt_cve_2018_3639; |
| tgt_cve_2018_3639 = get_cve_2018_3639_ctx(tgt_ctx); |
| |
| /* Restore CVE-2018-3639 mitigation state */ |
| write_ctx_reg(tgt_cve_2018_3639, CTX_CVE_2018_3639_DISABLE, |
| disp_ctx->disable_cve_2018_3639); |
| #endif |
| } |
| |
| static void save_secure_context(void) |
| { |
| cm_el1_sysregs_context_save(SECURE); |
| } |
| |
| /* Restore Secure context and arrange to resume it at the next ERET */ |
| static void restore_and_resume_secure_context(void) |
| { |
| cm_el1_sysregs_context_restore(SECURE); |
| cm_set_next_eret_context(SECURE); |
| } |
| |
| /* |
| * Restore Non-secure context and arrange to resume it at the next ERET. Return |
| * pointer to the Non-secure context. |
| */ |
| static cpu_context_t *restore_and_resume_ns_context(void) |
| { |
| cpu_context_t *ns_ctx; |
| |
| cm_el1_sysregs_context_restore(NON_SECURE); |
| cm_set_next_eret_context(NON_SECURE); |
| |
| ns_ctx = cm_get_context(NON_SECURE); |
| assert(ns_ctx != NULL); |
| |
| return ns_ctx; |
| } |
| |
| /* |
| * Prepare for ERET: |
| * - Set the ELR to the registered handler address |
| * - Set the SPSR register as described in the SDEI documentation and |
| * the AArch64.TakeException() pseudocode function in |
| * ARM DDI 0487F.c page J1-7635 |
| */ |
| |
| static void sdei_set_elr_spsr(sdei_entry_t *se, sdei_dispatch_context_t *disp_ctx) |
| { |
| unsigned int client_el = sdei_client_el(); |
| u_register_t sdei_spsr = SPSR_64(client_el, MODE_SP_ELX, |
| DISABLE_ALL_EXCEPTIONS); |
| |
| u_register_t interrupted_pstate = disp_ctx->spsr_el3; |
| |
| /* Check the SPAN bit in the client el SCTLR */ |
| u_register_t client_el_sctlr; |
| |
| if (client_el == MODE_EL2) { |
| client_el_sctlr = read_sctlr_el2(); |
| } else { |
| client_el_sctlr = read_sctlr_el1(); |
| } |
| |
| /* |
| * Check whether to force the PAN bit or use the value in the |
| * interrupted EL according to the check described in |
| * TakeException. Since the client can only be Non-Secure |
| * EL2 or El1 some of the conditions in ElIsInHost() we know |
| * will always be True. |
| * When the client_el is EL2 we know that there will be a SPAN |
| * bit in SCTLR_EL2 as we have already checked for the condition |
| * HCR_EL2.E2H = 1 and HCR_EL2.TGE = 1 |
| */ |
| u_register_t hcr_el2 = read_hcr(); |
| bool el_is_in_host = is_armv8_1_vhe_present() && |
| (hcr_el2 & HCR_TGE_BIT) && |
| (hcr_el2 & HCR_E2H_BIT); |
| |
| if (is_armv8_1_pan_present() && |
| ((client_el == MODE_EL1) || |
| (client_el == MODE_EL2 && el_is_in_host)) && |
| ((client_el_sctlr & SCTLR_SPAN_BIT) == 0U)) { |
| sdei_spsr |= SPSR_PAN_BIT; |
| } else { |
| sdei_spsr |= (interrupted_pstate & SPSR_PAN_BIT); |
| } |
| |
| /* If SSBS is implemented, take the value from the client el SCTLR */ |
| u_register_t ssbs_enabled = (read_id_aa64pfr1_el1() |
| >> ID_AA64PFR1_EL1_SSBS_SHIFT) |
| & ID_AA64PFR1_EL1_SSBS_MASK; |
| if (ssbs_enabled != SSBS_UNAVAILABLE) { |
| u_register_t ssbs_bit = ((client_el_sctlr & SCTLR_DSSBS_BIT) |
| >> SCTLR_DSSBS_SHIFT) |
| << SPSR_SSBS_SHIFT_AARCH64; |
| sdei_spsr |= ssbs_bit; |
| } |
| |
| /* If MTE is implemented in the client el set the TCO bit */ |
| if (get_armv8_5_mte_support() >= MTE_IMPLEMENTED_ELX) { |
| sdei_spsr |= SPSR_TCO_BIT_AARCH64; |
| } |
| |
| /* Take the DIT field from the pstate of the interrupted el */ |
| sdei_spsr |= (interrupted_pstate & SPSR_DIT_BIT); |
| |
| cm_set_elr_spsr_el3(NON_SECURE, (uintptr_t) se->ep, sdei_spsr); |
| } |
| |
| /* |
| * Populate the Non-secure context so that the next ERET will dispatch to the |
| * SDEI client. |
| */ |
| static void setup_ns_dispatch(sdei_ev_map_t *map, sdei_entry_t *se, |
| cpu_context_t *ctx, jmp_buf *dispatch_jmp) |
| { |
| sdei_dispatch_context_t *disp_ctx; |
| |
| /* Push the event and context */ |
| disp_ctx = save_event_ctx(map, ctx); |
| |
| /* |
| * Setup handler arguments: |
| * |
| * - x0: Event number |
| * - x1: Handler argument supplied at the time of event registration |
| * - x2: Interrupted PC |
| * - x3: Interrupted SPSR |
| */ |
| SMC_SET_GP(ctx, CTX_GPREG_X0, (uint64_t) map->ev_num); |
| SMC_SET_GP(ctx, CTX_GPREG_X1, se->arg); |
| SMC_SET_GP(ctx, CTX_GPREG_X2, disp_ctx->elr_el3); |
| SMC_SET_GP(ctx, CTX_GPREG_X3, disp_ctx->spsr_el3); |
| |
| /* Setup the elr and spsr register to prepare for ERET */ |
| sdei_set_elr_spsr(se, disp_ctx); |
| |
| #if DYNAMIC_WORKAROUND_CVE_2018_3639 |
| cve_2018_3639_t *tgt_cve_2018_3639; |
| tgt_cve_2018_3639 = get_cve_2018_3639_ctx(ctx); |
| |
| /* Save CVE-2018-3639 mitigation state */ |
| disp_ctx->disable_cve_2018_3639 = read_ctx_reg(tgt_cve_2018_3639, |
| CTX_CVE_2018_3639_DISABLE); |
| |
| /* Force SDEI handler to execute with mitigation enabled by default */ |
| write_ctx_reg(tgt_cve_2018_3639, CTX_CVE_2018_3639_DISABLE, 0); |
| #endif |
| |
| disp_ctx->dispatch_jmp = dispatch_jmp; |
| } |
| |
| /* Handle a triggered SDEI interrupt while events were masked on this PE */ |
| static void handle_masked_trigger(sdei_ev_map_t *map, sdei_entry_t *se, |
| sdei_cpu_state_t *state, unsigned int intr_raw) |
| { |
| uint64_t my_mpidr __unused = (read_mpidr_el1() & MPIDR_AFFINITY_MASK); |
| bool disable = false; |
| |
| /* Nothing to do for event 0 */ |
| if (map->ev_num == SDEI_EVENT_0) |
| return; |
| |
| /* |
| * For a private event, or for a shared event specifically routed to |
| * this CPU, we disable interrupt, leave the interrupt pending, and do |
| * EOI. |
| */ |
| if (is_event_private(map) || (se->reg_flags == SDEI_REGF_RM_PE)) |
| disable = true; |
| |
| if (se->reg_flags == SDEI_REGF_RM_PE) |
| assert(se->affinity == my_mpidr); |
| |
| if (disable) { |
| plat_ic_disable_interrupt(map->intr); |
| plat_ic_set_interrupt_pending(map->intr); |
| plat_ic_end_of_interrupt(intr_raw); |
| state->pending_enables = true; |
| |
| return; |
| } |
| |
| /* |
| * We just received a shared event with routing set to ANY PE. The |
| * interrupt can't be delegated on this PE as SDEI events are masked. |
| * However, because its routing mode is ANY, it is possible that the |
| * event can be delegated on any other PE that hasn't masked events. |
| * Therefore, we set the interrupt back pending so as to give other |
| * suitable PEs a chance of handling it. |
| */ |
| assert(plat_ic_is_spi(map->intr) != 0); |
| plat_ic_set_interrupt_pending(map->intr); |
| |
| /* |
| * Leaving the same interrupt pending also means that the same interrupt |
| * can target this PE again as soon as this PE leaves EL3. Whether and |
| * how often that happens depends on the implementation of GIC. |
| * |
| * We therefore call a platform handler to resolve this situation. |
| */ |
| plat_sdei_handle_masked_trigger(my_mpidr, map->intr); |
| |
| /* This PE is masked. We EOI the interrupt, as it can't be delegated */ |
| plat_ic_end_of_interrupt(intr_raw); |
| } |
| |
| /* SDEI main interrupt handler */ |
| int sdei_intr_handler(uint32_t intr_raw, uint32_t flags, void *handle, |
| void *cookie) |
| { |
| sdei_entry_t *se; |
| cpu_context_t *ctx; |
| sdei_ev_map_t *map; |
| const sdei_dispatch_context_t *disp_ctx; |
| unsigned int sec_state; |
| sdei_cpu_state_t *state; |
| uint32_t intr; |
| jmp_buf dispatch_jmp; |
| const uint64_t mpidr = read_mpidr_el1(); |
| |
| /* |
| * To handle an event, the following conditions must be true: |
| * |
| * 1. Event must be signalled |
| * 2. Event must be enabled |
| * 3. This PE must be a target PE for the event |
| * 4. PE must be unmasked for SDEI |
| * 5. If this is a normal event, no event must be running |
| * 6. If this is a critical event, no critical event must be running |
| * |
| * (1) and (2) are true when this function is running |
| * (3) is enforced in GIC by selecting the appropriate routing option |
| * (4) is satisfied by client calling PE_UNMASK |
| * (5) and (6) is enforced using interrupt priority, the RPR, in GIC: |
| * - Normal SDEI events belong to Normal SDE priority class |
| * - Critical SDEI events belong to Critical CSDE priority class |
| * |
| * The interrupt has already been acknowledged, and therefore is active, |
| * so no other PE can handle this event while we are at it. |
| * |
| * Find if this is an SDEI interrupt. There must be an event mapped to |
| * this interrupt |
| */ |
| intr = plat_ic_get_interrupt_id(intr_raw); |
| map = find_event_map_by_intr(intr, (plat_ic_is_spi(intr) != 0)); |
| if (map == NULL) { |
| ERROR("No SDEI map for interrupt %u\n", intr); |
| panic(); |
| } |
| |
| /* |
| * Received interrupt number must either correspond to event 0, or must |
| * be bound interrupt. |
| */ |
| assert((map->ev_num == SDEI_EVENT_0) || is_map_bound(map)); |
| |
| se = get_event_entry(map); |
| state = sdei_get_this_pe_state(); |
| |
| if (state->pe_masked) { |
| /* |
| * Interrupts received while this PE was masked can't be |
| * dispatched. |
| */ |
| SDEI_LOG("interrupt %u on %llx while PE masked\n", map->intr, |
| mpidr); |
| if (is_event_shared(map)) |
| sdei_map_lock(map); |
| |
| handle_masked_trigger(map, se, state, intr_raw); |
| |
| if (is_event_shared(map)) |
| sdei_map_unlock(map); |
| |
| return 0; |
| } |
| |
| /* Insert load barrier for signalled SDEI event */ |
| if (map->ev_num == SDEI_EVENT_0) |
| dmbld(); |
| |
| if (is_event_shared(map)) |
| sdei_map_lock(map); |
| |
| /* Assert shared event routed to this PE had been configured so */ |
| if (is_event_shared(map) && (se->reg_flags == SDEI_REGF_RM_PE)) { |
| assert(se->affinity == (mpidr & MPIDR_AFFINITY_MASK)); |
| } |
| |
| if (!can_sdei_state_trans(se, DO_DISPATCH)) { |
| SDEI_LOG("SDEI event 0x%x can't be dispatched; state=0x%x\n", |
| map->ev_num, se->state); |
| |
| /* |
| * If the event is registered, leave the interrupt pending so |
| * that it's delivered when the event is enabled. |
| */ |
| if (GET_EV_STATE(se, REGISTERED)) |
| plat_ic_set_interrupt_pending(map->intr); |
| |
| /* |
| * The interrupt was disabled or unregistered after the handler |
| * started to execute, which means now the interrupt is already |
| * disabled and we just need to EOI the interrupt. |
| */ |
| plat_ic_end_of_interrupt(intr_raw); |
| |
| if (is_event_shared(map)) |
| sdei_map_unlock(map); |
| |
| return 0; |
| } |
| |
| disp_ctx = get_outstanding_dispatch(); |
| if (is_event_critical(map)) { |
| /* |
| * If this event is Critical, and if there's an outstanding |
| * dispatch, assert the latter is a Normal dispatch. Critical |
| * events can preempt an outstanding Normal event dispatch. |
| */ |
| if (disp_ctx != NULL) |
| assert(is_event_normal(disp_ctx->map)); |
| } else { |
| /* |
| * If this event is Normal, assert that there are no outstanding |
| * dispatches. Normal events can't preempt any outstanding event |
| * dispatches. |
| */ |
| assert(disp_ctx == NULL); |
| } |
| |
| sec_state = get_interrupt_src_ss(flags); |
| |
| if (is_event_shared(map)) |
| sdei_map_unlock(map); |
| |
| SDEI_LOG("ACK %llx, ev:0x%x ss:%d spsr:%lx ELR:%lx\n", mpidr, map->ev_num, |
| sec_state, read_spsr_el3(), read_elr_el3()); |
| |
| ctx = handle; |
| |
| /* |
| * Check if we interrupted secure state. Perform a context switch so |
| * that we can delegate to NS. |
| */ |
| if (sec_state == SECURE) { |
| save_secure_context(); |
| ctx = restore_and_resume_ns_context(); |
| } |
| |
| /* Synchronously dispatch event */ |
| setup_ns_dispatch(map, se, ctx, &dispatch_jmp); |
| begin_sdei_synchronous_dispatch(&dispatch_jmp); |
| |
| /* |
| * We reach here when client completes the event. |
| * |
| * If the cause of dispatch originally interrupted the Secure world, |
| * resume Secure. |
| * |
| * No need to save the Non-secure context ahead of a world switch: the |
| * Non-secure context was fully saved before dispatch, and has been |
| * returned to its pre-dispatch state. |
| */ |
| if (sec_state == SECURE) |
| restore_and_resume_secure_context(); |
| |
| /* |
| * The event was dispatched after receiving SDEI interrupt. With |
| * the event handling completed, EOI the corresponding |
| * interrupt. |
| */ |
| if ((map->ev_num != SDEI_EVENT_0) && !is_map_bound(map)) { |
| ERROR("Invalid SDEI mapping: ev=0x%x\n", map->ev_num); |
| panic(); |
| } |
| plat_ic_end_of_interrupt(intr_raw); |
| |
| return 0; |
| } |
| |
| /* |
| * Explicitly dispatch the given SDEI event. |
| * |
| * When calling this API, the caller must be prepared for the SDEI dispatcher to |
| * restore and make Non-secure context as active. This call returns only after |
| * the client has completed the dispatch. Then, the Non-secure context will be |
| * active, and the following ERET will return to Non-secure. |
| * |
| * Should the caller require re-entry to Secure, it must restore the Secure |
| * context and program registers for ERET. |
| */ |
| int sdei_dispatch_event(int ev_num) |
| { |
| sdei_entry_t *se; |
| sdei_ev_map_t *map; |
| cpu_context_t *ns_ctx; |
| sdei_dispatch_context_t *disp_ctx; |
| sdei_cpu_state_t *state; |
| jmp_buf dispatch_jmp; |
| |
| /* Can't dispatch if events are masked on this PE */ |
| state = sdei_get_this_pe_state(); |
| if (state->pe_masked) |
| return -1; |
| |
| /* Event 0 can't be dispatched */ |
| if (ev_num == SDEI_EVENT_0) |
| return -1; |
| |
| /* Locate mapping corresponding to this event */ |
| map = find_event_map(ev_num); |
| if (map == NULL) |
| return -1; |
| |
| /* Only explicit events can be dispatched */ |
| if (!is_map_explicit(map)) |
| return -1; |
| |
| /* Examine state of dispatch stack */ |
| disp_ctx = get_outstanding_dispatch(); |
| if (disp_ctx != NULL) { |
| /* |
| * There's an outstanding dispatch. If the outstanding dispatch |
| * is critical, no more dispatches are possible. |
| */ |
| if (is_event_critical(disp_ctx->map)) |
| return -1; |
| |
| /* |
| * If the outstanding dispatch is Normal, only critical events |
| * can be dispatched. |
| */ |
| if (is_event_normal(map)) |
| return -1; |
| } |
| |
| se = get_event_entry(map); |
| if (!can_sdei_state_trans(se, DO_DISPATCH)) |
| return -1; |
| |
| /* |
| * Prepare for NS dispatch by restoring the Non-secure context and |
| * marking that as active. |
| */ |
| ns_ctx = restore_and_resume_ns_context(); |
| |
| /* Activate the priority corresponding to the event being dispatched */ |
| ehf_activate_priority(sdei_event_priority(map)); |
| |
| /* Dispatch event synchronously */ |
| setup_ns_dispatch(map, se, ns_ctx, &dispatch_jmp); |
| begin_sdei_synchronous_dispatch(&dispatch_jmp); |
| |
| /* |
| * We reach here when client completes the event. |
| * |
| * Deactivate the priority level that was activated at the time of |
| * explicit dispatch. |
| */ |
| ehf_deactivate_priority(sdei_event_priority(map)); |
| |
| return 0; |
| } |
| |
| static void end_sdei_synchronous_dispatch(jmp_buf *buffer) |
| { |
| longjmp(*buffer, 1); |
| } |
| |
| int sdei_event_complete(bool resume, uint64_t pc) |
| { |
| sdei_dispatch_context_t *disp_ctx; |
| sdei_entry_t *se; |
| sdei_ev_map_t *map; |
| cpu_context_t *ctx; |
| sdei_action_t act; |
| unsigned int client_el = sdei_client_el(); |
| |
| /* Return error if called without an active event */ |
| disp_ctx = get_outstanding_dispatch(); |
| if (disp_ctx == NULL) |
| return SDEI_EDENY; |
| |
| /* Validate resumption point */ |
| if (resume && (plat_sdei_validate_entry_point(pc, client_el) != 0)) |
| return SDEI_EDENY; |
| |
| map = disp_ctx->map; |
| assert(map != NULL); |
| se = get_event_entry(map); |
| |
| if (is_event_shared(map)) |
| sdei_map_lock(map); |
| |
| act = resume ? DO_COMPLETE_RESUME : DO_COMPLETE; |
| if (!can_sdei_state_trans(se, act)) { |
| if (is_event_shared(map)) |
| sdei_map_unlock(map); |
| return SDEI_EDENY; |
| } |
| |
| if (is_event_shared(map)) |
| sdei_map_unlock(map); |
| |
| /* Having done sanity checks, pop dispatch */ |
| (void) pop_dispatch(); |
| |
| SDEI_LOG("EOI:%lx, 0x%x spsr:%lx elr:%lx\n", read_mpidr_el1(), |
| map->ev_num, read_spsr_el3(), read_elr_el3()); |
| |
| /* |
| * Restore Non-secure to how it was originally interrupted. Once done, |
| * it's up-to-date with the saved copy. |
| */ |
| ctx = cm_get_context(NON_SECURE); |
| restore_event_ctx(disp_ctx, ctx); |
| |
| if (resume) { |
| /* |
| * Complete-and-resume call. Prepare the Non-secure context |
| * (currently active) for complete and resume. |
| */ |
| cm_set_elr_spsr_el3(NON_SECURE, pc, SPSR_64(client_el, |
| MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS)); |
| |
| /* |
| * Make it look as if a synchronous exception were taken at the |
| * supplied Non-secure resumption point. Populate SPSR and |
| * ELR_ELx so that an ERET from there works as expected. |
| * |
| * The assumption is that the client, if necessary, would have |
| * saved any live content in these registers before making this |
| * call. |
| */ |
| if (client_el == MODE_EL2) { |
| write_elr_el2(disp_ctx->elr_el3); |
| write_spsr_el2(disp_ctx->spsr_el3); |
| } else { |
| /* EL1 */ |
| write_elr_el1(disp_ctx->elr_el3); |
| write_spsr_el1(disp_ctx->spsr_el3); |
| } |
| } |
| |
| /* End the outstanding dispatch */ |
| end_sdei_synchronous_dispatch(disp_ctx->dispatch_jmp); |
| |
| return 0; |
| } |
| |
| int64_t sdei_event_context(void *handle, unsigned int param) |
| { |
| sdei_dispatch_context_t *disp_ctx; |
| |
| if (param >= SDEI_SAVED_GPREGS) |
| return SDEI_EINVAL; |
| |
| /* Get outstanding dispatch on this CPU */ |
| disp_ctx = get_outstanding_dispatch(); |
| if (disp_ctx == NULL) |
| return SDEI_EDENY; |
| |
| assert(disp_ctx->map != NULL); |
| |
| if (!can_sdei_state_trans(get_event_entry(disp_ctx->map), DO_CONTEXT)) |
| return SDEI_EDENY; |
| |
| /* |
| * No locking is required for the Running status as this is the only CPU |
| * which can complete the event |
| */ |
| |
| return (int64_t) disp_ctx->x[param]; |
| } |